Storage section not allowed

I was trying to create a TO with LT01 and mvt type 999.
Its giving an error - 'Putaway in storage section 'A' is not allowed.
It is not allowing to delete these storage sections. I have only 2 storage sections for this storage type.
1.Why this error is coming?
2.What controls this?
Please explain.

SPRO>Logistics Execution>Warehouse Management>Strategies>Putaway Strategy>Define Strategy for XXXXXBins>Click on any of the entries(the bins and data u r working on) and click on the glass symbl...then you will the indicator for Addn Stock....
If you also go through the below, check there as well...
SPRO>Logistics Execution>Warehouse Management>Define Storage Types>Click on any of the entries(the bins and data u r working on) and click on the glass symbl...then you will the indicator for Addn Stock....

Similar Messages

  • Storage class not allowed in storage type

    Hi All,
    I am getting this error while confirming  the TO.
    It stays Storage class is not allowed in Storage type but how can  this be configured in OMM2.
    or do we need to define any sequence in OMLY.

    Hi
    Have u defined your material as Hazardous material? is so, yes, u have to do settings in OMLY.
    "Storage class: Classifies hazardous materials with regard to their storage conditions. A check can be carried out to find out whether hazardous materials that belong to a specific storage class may be placed into a particular storage type".
    Rgds
    Ramesh

  • Win 8.1 Storage Pool not allowing "add drive" nor allow expand capacity

    Have one Storage Space within one Storage Pool (Parity mode) containing 4 identical hard drives.
    Used for data storage, it appears to be functioning normally
    and
    has filled 88% of capacity
    (ie. 88% x 2/3 of physical capacity (parity mode))
    The only other storage on this new PC is an SSD used for OS (win 8.1 pro) and application software.
    In "Manage Storage Spaces"
    displays this warning message to add drives:
    <   Warning                               >
    <   Low capacity; add 3 drives   >
    After clicking "add drives", it displays:
    "No drives that work with Storage Spaces are available. Make sure that the drives that you want to use are connected.".
    However I had connected another two identical hard drives via SATA cables and "Disk Management" displays these two drives available.
    in summary:
    "Manage Storage Spaces" does not find these drives as available although they show correctly in Disk Management.
    btw - I removed the pre-existing partitioning on the 'new' drives so now they show only as "unallocated" in "Disk Management". (I did
    likewise before Storage Pool found the 4 original drives)
    Perhaps the problem is to increase the total nominal capacity of the Storage Space, before can add more drives?
    Microsoft says that the capacity of Storage Pools can be increased but cannot be decreased -
    but computer displays no Change "button" by which this can be done. There is supposed to be a "Change" button but that is
    not displaying for me. So "Manage Storage Spaces" offer me no option to manage the "size" of the pool.
    only five options are displayed:
    Create a storage space     (ie. from the small amount remaining unused in the Pool)
    Add drives     (.... as explained already)
    Rename pool    (only renames the storage space)
    Format        (ie. re-format and so lose all current data)
    Delete         (ie. delete the storage space and so lose all current data)
    using Google, find nothing bearing on this problem
    except the most basic instructions to set up a storage space!
    Can you help?
    The problem is that the Storage Pool is not displaying a "button" to increase capacity, and when click "add drives" finds no hard drives available. 

    Hi,
    I would suggest you launch Device Manager, then expand
    Disk drives. Right-click the disk listed as "Disk drive", and select
    Uninstall. On the Action menu, click Scan for hardware changes to reinstall the disk.
    Please also take a look of this link:
    see this part: How do I increase pool capacity?
    http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#How_do_I_increase_pool_capacity 
    According to the link, to extend a parity space, the pool would need the appropriate number of columns available to accommodate the layout of the disk.
    Yolanda Zhu
    TechNet Community Support

  • [POL-3267] read-only database or critical section not allowed

    After each execution of the application, the base is left in state read-only, which produces error POL 3267 in the following execution.
    Which could be the reason?
    How can it be solved?
    Thanks,
    German Gioia
    [email protected]
    ANGRAS SRL

    Never mind, I am answering my own thread.
    The code posted by Balaji Rathakrishnan
    from SQL Server dev team no longer works on SQL 20012, without additional annotation:
    Here is the fix: (add DataAccess = .....Read etc) as below
      [SqlFunction(FillRowMethodName = "FillRow", TableDefinition = "FileContents varbinary(max)", DataAccess
    = DataAccessKind.Read)]
        public static IEnumerator GetFile(String FileName)
            return new SingleFileLoader(FileName);
    All is well now.
    Yuri Budilov
    Yuri Budilov

  • Mixed Storage not allowed

    Hi,
    Below is the scenario....
    I created a Standard Purchase Order and an Inbound delivery...
    When I trying to create Transfer orders for that Inbound delivery through LT03, and save it....I am getting error message saying "Mixed Storage is not allowed in storage Type xxx"...
    If I change the destination storage type from XXX to YYY and save it, I am getting error message saying " Quant XXXXXXX not consistent with other Transfer Order data".
    Can you please help me resolving this?.....

    Your storage type is not mixed storage type.
    SPRO>Logistics Execution>Warehouse Management>Master Data>Define Storage Type.
    For your warehouse storage type check your settings.If wabnt allow both you have to activate mixed storage type in configuration.

  • I have set my preferences to not allow storage yet i constantly have to remove it..why?

    i have set my global and website storage to not allow any storage at all yet over and over I am constantly having to remove storage from a few websites and no I am not allowing them to do it in any way that I know of...can this be fixed somehow?

    If you're viewing Flash content, then you MUST allow some data to be stored (even as little as 10kb) or everything will constantly freeze and restart.
    I've doen it for testing and it's unbearable to try and watch a video or animation with ALL storage blocked.
    I'm curious. Is your hard drive so full that Flash storage is causing problems?

  • Error in storage section (LT09) - WM

    Hi to you all,
    We were using tc LT09 to transfer a storage unit from one
    position to another.
    When determening the destination storage bin, system does not
    recognize the correct destination storage section (we've
    check if the storage section is correct and everything is
    ok), the following error occurs: L3 038 - Putaway in storage
    section 001 is not allowed.
    The problem is that system does not recognize the storage
    section (322) and goes to the default one (001).
    If we try to do the exactly same movement in LT01 everything
    works out fine.
    Can you please help us with this problem?
    Thanks in advanced for your help.
    Best regards,
    Marisa S.

    charlie thanks for your answer, but i've already done that.
    Storage section is allowed. In storage bin search log i get this:
    Storage bin search attempt  1                               
    Required qty... 5,000 CRT                                   
    St.unit type... E1                                                                               
    Determ.of source data      Known:                           
                               Storage type... 000              
                               Storage bin.... 0000001247       
                               Quant number... 0000001247                                                                               
    Determ.destination data    Known:                           
                               Storage type... 001              
                               Storage area... 322              
                               Storage bin.... N-90-01          
                               Storage unit... 0000000312       
      System message L3  038                                    
        Putaway in storage section 001 is not allowed           
      Do you have any ideia how to solve this?
    Thanks.
    Best regards,
    Marisa S.

  • Different storage section  get picks while TO creation

    Dear expert
    Different storage section ( not which has been assigned in strategy) get picks while TO creation
    Regards
    Karan

    Different storage section ( not which has been assigned in strategy) get picks while TO creation
    You probably didn't activate the section determination for the storage type. If don't activate this, he ignores your configured strategy.
    IMG: Logistics Execution -> Warehouse Management -> Strategies -> Activate Storage Section Search -> Activate, and then check the setting for your storage type.

  • Putaway in storage section 100 is not allowed

    hi,
    I am facing a problem
    while creatin a TO  i am getting an error Putaway in storage section 100 is not allowed
    All the strategy for the patricular storage type and the storage section is maintained in the config.
    Thanks in Advance
    Sunil

    your target storage bin  has a storage section 100 assigned.
    your material master has a storage section indicator.
    In OMLZ (storage section search) find the record for your warehouse and storage type having the storage section indicator from your material master, and check into what storage sections (below 1..., 2...., 3,,,) you can putaway the stock.

  • Putaway in storage section PA1 is  not allowed

    Hello,
    While creating TO against TR in LT04 system is giving error message as above said in subject line.
    I have checked in LX20 and LS04 bins are there even though still getting same error.
    Please let me know  what could be the reasion and solution for this issue.
    Thanks in advance.

    you get this error if the storage section check is made active in customizing transaction OMLZ
    here you first define one or more storage section indicators (also named storage area indicator).
    then you define a storage section search per combination of warehouse and storage type and storage section indicators  and assign the possible storage section  for this combination.
    in the storage bins (LS01N) you enter the storage section to which this bin belongs.
    in the material master you enter the storage section indicator
    if a bin is determined which has a storage section that is not among the listed storage sections from the storage section search then the error you have is issued.

  • Error states ''Putaway in storage section SSA is not allowed''.

    Edited by: Sunny on Sep 11, 2008 10:26 AM

    Hi
    You need to check that you have the correct strategies set up for storage sections and for storage bins and for storage unit types that they are allowed to go where you are trying to put them
    Frenchy

  • My iPad is frozen with the message not enough storage.  Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off.  How do I get past that message?

    My iPad is frozen with the message not enough storage.  Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off.  How do I get past that message?

    Delete some apps, files, photos, videos, movies, etc to free up some space.
    How much space is your Other using? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
     Cheers, Tom

  • HT4847 I have been trying to pay £7.99 for my icloud storage but the online would not allow me to enter new card details as the one you have has expired ?

    I have been trying to pay £7.99 for my icloud storage upgrade but the online would not allow me to enter new debit card details as the one you have has expired ?
    How can I entre new card details to do so?

    You have to change the card in the 'Account' section of the iTunes Store, in 'Payment details'.

  • HT4972 i just purchased more storage for my iphone 4 and also deleted some apps and it still will not allow me to update to ios7

    i just purchased more storage and deleted some apps and my iphone4 and it still will not allow me to update to ios7

    The iCloud storage is meant for your backup, you do not get more space on iPhone.
    You can by connecting to computer iTunes for update then you will not have space problem

  • I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?

    I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?

    The only available, signed, iOS, for your iPod, is iOS 7.1. That's why you can't install iOS 6.1.6.

Maybe you are looking for