Storage space disappeared?
Hello. I was just wondering if storage space is regularly removed from accounts on htmldb.oraclecorp.com. I had 15MB of storage yesterday when I was working on my project, but today it's down to just over 8MB.
Unfortunately, I was in the middle of trying to migrate application data and needed to upload a 5MB+ XML file of data. =/
If you have access to a computer you should be able to recover the music following these instructions.
Music from iPod to computer (using option 2).
After that, you should restore the iPod and then you can reload the music.
If you do not have access to a computer, there's little else you can do except reset the iPod, but it's unlikely that will help.
Similar Messages
-
Server 2012 RC. I'm using Storage Spaces, with two virtual disks across 23 underlying physical disks.
* First virtual disk is fixed provisioning, parity across 23 physical disks: 10,024GB capacity
* Second virtual disk is fixed provisioning, parity across the remaining space on 6 of the same physical disks: 652GB capacity
These have been configured as dynamic disks, with an NTFS volume spanned across the two (larger virtual disk first). Total volume size 10,676GB. For more details of the hardware, and why the configuration is like this, see: http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/c35ff156-01a8-456a-9190-04c7bcfc048e
I'm copying several TB from a network share to this volume. It is very slow at ~12MB/sec, but works. However, three times so far, several hours in to the file copy and with plenty of free space remaining, the 10,024GB virtual disk is suddenly taken offline.
This obviously then fails the spanned volume and stops the file copy.
The second time, I took screenshots, below. The disk (Disk27) is marked offline due to "This disk is offline because it is out of capacity". And the disk in the spanned volume is marked as missing (which is what you would expect when one of its member disks
is offline).
I can then mark the disk (Disk27) back online again, and this restores the spanned volume. I can then re-start the file copy from where it failed. There doesn't appear to be any data loss, but it does cause an outage that requires manual attention. As you
can see, there is plenty of space left on the spanned volume.
Each time this has happened, there are a few event 150 errors in the System event log: "Disk 27 has reached a logical block provisioning permanent resource exhaustion condition.". Source: Disk.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="disk" />
<EventID Qualifiers="49156">150</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-06-07T11:24:53.572101500Z" />
<EventRecordID>14476</EventRecordID>
<Channel>System</Channel>
<Computer>Trounce-Server2.trounce.corp</Computer>
<Security />
</System>
- <EventData>
<Data>\Device\Harddisk27\DR27</Data>
<Data>27</Data>
<Binary>000000000200300000000000960004C0000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
This error seems to be related to thin provisioning of disks. I found this:
http://msdn.microsoft.com/en-us/library/windows/desktop/hh848068(v=vs.85).aspx. But both these Virtual Disks are configured as Fixed, not Thin provisioning, so it shouldn't apply.
My thoughts: the virtual disk should not spuriously go offline during a file copy, even if it was out of space. And in any case, there is plenty of free space remaining. Also, I don't understand the reason for why it is marked as offline ("This disk is offline
because it is out of capacity"). Why would a disk go offline because it was out of thin capacity, rather than just returning an "out of disk space" error while keeping it online.Interesting Thread, I've been having the same issue. I had a failed hardware RAID that was impossible to recover in place, so after being forced to do a 1:1 backup, I find myself with 5 2TB hard drives to play with. Storage Spaces seemed like an interesting
way to go until I started facing the issues we share.
So my configuration is A VM Running Windows Server 2012 RC with 5 Virtualized Physical drives using a SCSI interface, 2TB in size that make up my storage pool. A Single Thinly provisioned Disk of 18 TB (using 1 disk for parity)
Interestly enough, write speed has not been an issue on this machine (30~70MB/s, up from 256k on the beta)
Of note to me is this error in my event log 13 minutes before the drive disappeared:
"The shadow copies of volume E: were deleted because the shadow copy storage could not grow in time.Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied."Source: volsnap, Event ID: 25, Level: Error
followed by:
"The system failed to flush data to the transaction log. Corruption may occur in VolumeId: E:, DeviceName: \Device\HarddiskVolume17.(The physical resources of this disk have been exhausted.)"Source: Ntfs (Microsoft-Windows-Ntfs), Event ID: 140, Level: Warning
I figure the amount of space available to me before I start encountering physical limits is in the vicinity of about 7TB. It dropped out for the second time at 184 GB.
FYI, the number of columns created for me is 5
Regards,
Steven Blom -
IPhone 6 losing storage space by the minute. why?
I Have a iPhone 6.
i have done nothing other than FB and safari surf.
my storage is disappearing fast.
when I check on iTunes it show 26G of other.
its not app, photos or videos doing this.
something is chew up my storage space.
any answers?What is "Other" and What Can I Do About It?
-
"Cannot Download - There is not enough available storage space."
When attempting to update apps, I receive an error message
"Cannot Download - There is not enough available storage space."
When I Go to settings, there is 10.6 GB available
What is the deal?
Thanks in advance
MarkFirst, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
-AV files that are taking up over 75% of storage space
I'm having this problem with my XSAN where users are digitzing in 10 uncompressed footage with files that will take up over half the remaining storage space. I'm talking one quicktime that will be anywhere between 3-5TB's. It is an intermittent problem. I have updated my the clients to XSAN 1.1, with the latest Xserve Raid drivers as well. We're running FCP 4.5 on 10.3.9 systems, and the XSAN is running on 10.3.9 as well with all current updates. Anybody else running into this?
Hi there Billy. I had the same problem. And I to am using the Kona cards and versions of the OS and FCP. It does seem to be some bug in FCP that is causing this problem. The way we get around is to first avoid using the "capture now" command. But when we have to we just monitor the available space and if it all of a sudden disappears then we can go back and delete that FCP file from the XSAN. It is usually only a 8k file in the finder. But when you delete it you will get all your space back.
The command line version is to
ran this command:
server name:/volumes/xsan admin$ du -hc
found this file: 912G ./FCP /Capture Scratch/Untitled Project 1 (showed as 8k in finder)
ran this command to remove it: server name:/volumes/xsan/FCP /Capture Scratch admin$ sudo rm -R Untitled\ Project\ 1/
in this case the file was named Untitled Project 1.
Hope this helps you -
"Missing" 4GB+ of previous iPad storage space
A couple of us have noticed that after restoring our "New" iPads from iPad 2 backups about 4GB+ of previously storage space has disappeared. Anybody else seeing this? If so, does anyone know what happened to it? New app requirements, perhaps? Just curious.
The apps that have been enhanced for the retina display are signifcantly larger.
-
Storage spaces + Hyper-V with multiple 1GBe nics for storage?
Hi guys!
So I just got my private cloud hardware. I actually put in the order before summer, but due to firmware and certification issues on my desired SuperMicro JBODs delivery was seriously delayed. So much that I've completely forgotten my networking ideas. I
need help/verification. Or at least a URL - most described setups are 10 GBe nowadays... Or even a "not gonna work" :-)
My setup is supposed to be a 3 JBOD, 2 head node storage spaces/sfos cluster providing storage to a 4 node Hyper-V cluster. I didn't have a budget for a 10 GBe setup, but got a great price on a lot of 1 GBe nics. After allocating management, Hyper-V, etc
I have 3x 1 GBe ports left on all Hyper-V and Storage servers.
I think my original plan was to create three subnets and add one nic from each server. And then I guess I've imagined some kind of SMB3 magic discovering these paths between Hyper-V and storage and just aggregating bandwitdh and providing fault tolerance
by sprinkling fairy dust. Must have been the heat...
So now I'm "replanning" and I realize that I'm going to create a failover cluster at the storage level providing a cluster name and IP. I'm thinking the management subnet where domain info resides is appropriate, but then what about the other three
subnets? I don't want to flood my management subnet with storage traffic, but do want bandwidth and resilience. Did I make a design error, and how do I make the best of the situation?
Disclaimer: My previous experience on virtualization clusters is ISCSI SAN and 2008 R2 Hyper-V clusters. Storage Spaces is completely new to me :-)
And due to overlapping technologies I struggled a bit on placing this thread. Hope I got it rightHello,
i did not understand how many NICs you have in each Host. Hyper-V Cluster with 1 GBe NICs work as long as you know that it is not 10 GBe.
In this article is the complete Hyper-V Cluster design in checklist form. I think you should work with this list for some further ideas:
http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
Sorry that i cant give a better answer, but i lack information about about your environment.
Regards,
Thomas
Thomas Hanrath [MCT | Regional Lead Germany] |
http://www.hanrath.de
Microsoft Learning Blog |
http://blog.microsoftlearning.de
MCSE | Private Cloud -
I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)
You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone. -
MY IPhone will not let me back up my phone or download the IOS 7 update because it says i do not have enough storage space. But I deleted all of my apps and pictures just to update it and it still wont let me do it. What should I do?
Contact iTunes to re-enable your account at expresslane.apple.com
You can reach them by chat or email. -
Memory Dump :FBL5N No roll storage space of length 1753104 available for internal storage.
Dear Friends,
I am getting below error during T-Code FBL3N Report. No roll storage space of length 1753104 available for internal storage.
Our Server' RAM size is 24 GB,and existing parameters are as below
ztta/roll_area: 6500000
ztta/roll_extension:2000683008
abap/heap_area_total:2000683008
abap/heap_area_dia: 5000000000
abap/heap_area_nondia: 2000683008
em/initial_size_MB: 4092
Please suggest Parameter to be change.
Details Dump log ST22
Runtime Errors TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Date and Time 04.03.2014 10:18:48
|Short Text |
| No roll storage space of length 1753104 available for internal storage. |
|What happened? |
| Each transaction requires some main memory space to process |
| application data. If the operating system cannot provide any more |
| space, the transaction is terminated. |
|What can you do? |
| |
| Try to find out (e.g. by targetted data selection) whether the |
| transaction will run with less main memory. |
| |
| If there is a temporary bottleneck, execute the transaction again. |
| - |
| |
| If the error persists, ask your system administrator to check the |
| following profile parameters: |
| |
| o ztta/roll_area (1.000.000 - 15.000.000) |
| Classic roll area per user and internal mode |
| usual amount of roll area per user and internal mode |
| o ztta/roll_extension (10.000.000 - 500.000.000) |
| Amount of memory per user in extended memory (EM) |
| o abap/heap_area_total (100.000.000 - 1.500.000.000) |
| Amount of memory (malloc) for all users of an application |
| server. If several background processes are running on |
| one server, temporary bottlenecks may occur. |
| Of course, the amount of memory (in bytes) must also be |
| available on the machine (main memory or file system swap). |
| Caution: |
| The operating system must be set up so that there is also |
| enough memory for each process. Usually, the maximum address |
| space is too small. |
| Ask your hardware manufacturer or your competence center |
| about this. |
| In this case, consult your hardware vendor |
| abap/heap_area_dia: (10.000.000 - 1.000.000.000) |
| Restriction of memory allocated to the heap with malloc |
| for each dialog process. |
| Parameters for background processes: |
| abap/heap_area_nondia: (10.000.000 - 1.000.000.000) |
| Restriction of memory allocated to the heap with malloc |
| for each background process. |
| Other memory-relevant parameters are: |
| em/initial_size_MB: (35-1200) |
| Extended memory area from which all users of an |
| application server can satisfy their memory requirement. |
| Note which actions and input led to the error. |
| |
| For further help in handling the problem, contact your SAP administrator |
| . |
| |
| You can use the ABAP dump analysis transaction ST22 to view and manage |
| termination messages, in particular for long term reference. |
| |
|Error analysis |
| The internal table "\CLASS=ZCL_IM__GTA_TAX_CODE\METHOD=IF_EX_FI_ITEMS_CH_DATA~C |
| HANGE_ITEMS\DATA=GT_BSIK" could not be enlarged further. |
| |
| Memory location: "Session memory" |
| |
| You attempted to extend the data structure for the management of the |
| memory blocks for table "\CLASS=ZCL_IM__GTA_TAX_CODE\METHOD=IF_EX_FI_ITEMS_CH_D |
| ATA~CHANGE_ITEMS\DATA=GT_BSIK". However, the 1753104 bytes required for |
| this were no longer available in the specified memory area. |
| |
| The amount of memory requested is no longer available. |
|How to correct the error |
| |
| Try to decide by analysis whether this request is |
| reasonable or whether there is a program error. You should pay |
| particular attention to the internal table entries listed below. |
| |
| |
| |
| |
| |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY" " " |
| "ZCL_IM__GTA_TAX_CODE==========CP" or "ZCL_IM__GTA_TAX_CODE==========CM001" |
| "IF_EX_FI_ITEMS_CH_DATA~CHANGE_ITEMS" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |
|System environment |
| SAP-Release 700 |
| |
| Application server... "NEWPRD1" |
| Network address...... "10.0.0.1" |
| Operating system..... "Windows NT" |
| Release.............. "6.0" |
| Hardware type........ "16x AMD64 Level" |
| Character length.... 16 Bits |
| Pointer length....... 64 Bits |
| Work process number.. 19 |
| Shortdump setting.... "full" |
| |
| Database server... "NEWPRD1" |
| Database type..... "ORACLE" |
| Database name..... "PRD" |
| Database user ID.. "SAPSR3" |
| |
| Terminal................. " " |
| |
| Char.set.... "C" |
| |
| SAP kernel....... 700 |
| created (date)... "Sep 17 2012 22:56:00" |
| create on........ "NT 5.2 3790 Service Pack 2 x86 MS VC++ 14.00" |
| Database version. "OCI_10201_SHARE (10.2.0.4.0) " |
| |
| Patch level. 353 |
| Patch text.. " " |
| |
| Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*" |
| SAP database version. 700 |
| Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows |
| NT 6.0, Windows NT 6.1, Windows NT 6.2" |
| |
| Memory consumption |
| Roll.... 16192 |
| EM...... 1826770240 |
| Heap.... 0 |
| Page.... 40960 |
| MM Used. 1815573536 |
| MM Free. 2717408 |
|User and Transaction |
| |
| Client.............. 500 |
| User................ 1651 |
| Language key........ "E" |
| Transaction......... " " |
| Transactions ID..... "ED4EA3E3AB0AF11DA318E61F131BC713" |
| |
| Program............. "ZCL_IM__GTA_TAX_CODE==========CP" |
| Screen.............. "SAPMSSY0 1000" |
| Screen line......... 6 |
|Information on where terminated |
| Termination occurred in the ABAP program "ZCL_IM__GTA_TAX_CODE==========CP" - |
| in "IF_EX_FI_ITEMS_CH_DATA~CHANGE_ITEMS". |
| The main program was "RFITEMGL ". |
| |
| In the source code you have the termination point in line 64 |
| of the (Include) program "ZCL_IM__GTA_TAX_CODE==========CM001". |
| The program "ZCL_IM__GTA_TAX_CODE==========CP" was started as a background job. |
| Job Name....... "RFITEMGL" |
| Job Initiator.. "BASIS" |
| Job Number..... 09115400 |
|Source Code Extract |
|Line |SourceCde |
| 34| MANDT TYPE BSEG-MANDT, |
| 35| BUKRS TYPE BSEG-BUKRS, |
| 36| BELNR TYPE BSEG-BELNR, |
| 37| GJAHR TYPE BSEG-GJAHR, |
| 38| BUZEI TYPE BSEG-BUZEI, |
| 39| QSSKZ TYPE BSEG-QSSKZ, |
| 40| KTOSL TYPE BSEG-KTOSL, |
| 41| HKONT TYPE BSEG-HKONT, |
| 42| END OF TY_BSEG, |
| 43| |
| 44| BEGIN OF TY_FINAL, |
| 45| BUKRS TYPE BSEG-BUKRS, |
| 46| BELNR TYPE BSEG-BELNR, |
| 47| GJAHR TYPE BSEG-GJAHR, |
| 48| END OF TY_FINAL. |
| 49| |
| 50| DATA: CW_ITEMS TYPE RFPOSXEXT, |
| 51| GT_BSIK TYPE STANDARD TABLE OF TY_BSIK, |
| 52| GW_BSIK TYPE TY_BSIK, |
| 53| GT_BSAK TYPE STANDARD TABLE OF TY_BSAK, |
| 54| GW_BSAK TYPE TY_BSAK, |
| 55| GT_BSEG TYPE STANDARD TABLE OF TY_BSEG, |
| 56| GW_BSEG TYPE TY_BSEG, &nbsap basis wrote:
|Information on where terminated |
| Termination occurred in the ABAP program "ZCL_IM__GTA_TAX_CODE==========CP" - |
| in "IF_EX_FI_ITEMS_CH_DATA~CHANGE_ITEMS". |
| The main program was "RFITEMGL ". |
| |
| In the source code you have the termination point in line 64 |
| of the (Include) program "ZCL_IM__GTA_TAX_CODE==========CM001". |
| The program "ZCL_IM__GTA_TAX_CODE==========CP" was started as a background job. |
| Job Name....... "RFITEMGL" |
| Job Initiator.. "BASIS" |
| Job Number..... 09115400 |
First of all try to optimize code. -
After upgrading to 8.1 Pro from 8.0 Pro, my Storage Spaces and Storage Pool are all gone.
Under 8.0 I had three 4-terabyte drives set up as a Storage Pool in Storage Spaces. I had five storage-space drives using this pool I had
been using them for months with no problems. After upgrading to 8.1 ( which gave no errors ) the drives no longer exist. Going into "Storage Spaces" in the control panel, I do not see my existing storage pool or storage drives. I'm prompted
to create a new Pool and Storage Spaces. If I click the "Create Pool" it does not list the three drives I used previously as available to add.
Device Manager shows all three drives as present and OK.
Disk Management shows Disks 0,1,2,6. The gap in between 2 and 6 is where the 3,4,5 storage spaces drives were.
Nothing helpful in the event log or the services.
I've downloaded the ReclaiMe Storage Spaces recovery tool and it sees all of my logical drives with a "good" prognosis for recovery. I've not gone down that road yet though because it requires separate physical drives to copy everything to
and they want $299 for the privilege.
Does anyone have any ideas? I'm thinking of doing a fresh 8.1 install to another drive to see if it can see it or reinstalling 8.1 to the existing drive in the hope that it will just suddenly work. Or possibly going back to 8.0.
Thanks for your help!
SteveHi,
“For parity spaces you must backup your data and delete the parity spaces. At this point, you may upgrade or perform a clean install of Windows 8. After the upgrade or clean installation is complete, you may recreate parity spaces and
restore your data.”
I’d like to share the following article with you for reference:
Storage Spaces Frequently Asked Questions
(Pay attention to this part:How do I prepare Storage Spaces for upgrading from the Windows 8 Consumer Preview to Windows 8 Release Preview?)
http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#How_do_I_prepare_Storage_Spaces_for_upgrading_from_the_Windows_8_Consumer_Preview_to_Windows_8_Release_Preview
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
After upgrading to IOS 5 my storage space in "other" is using 4.1GB of space..
After I updated to IOS 5, my storage space lost a huge amount of space.. The "Other" category is showing 4.1GB and I don't even see what it is that is using that space..
"Other" is for things that don't match the remaining categories defined by Apple. Quite often, a large "other" is the result of an app orphaning data on your phone. The app no longer cares about the data, but the phone says it wasn't properly deleted, so the phone keeps it around. It is possible that you also have a third party map program that has stored a large amount of map data as "other" for off-line usage.
In most cases, you can only recover this space by epfroming a factory restore, then re-installing your apps and data manually. My 2.5 year old iPod Touch has about 450MB of "other" and my iPhone 4 has about 580MB. I keep an eye on them and as long as it isn't causing me problems, I tend to not worry too much. -
I have multiple devices all under the same id and email but I don't get multiple icloud storage space and it's running out!
Can anyone help as I've just bought an iphone for my daughter and would like to link it as well.
Thanks in anticipation of your help.One icloud account gets a 5 GB of storage, regardless of the number of devices connecting to it. But you're in luck, you can buy more storage for the account if you are running low.
As for your daughter, be sure to get her own icloud account, otherwise she'll end up getting all your email, contacts, etc. And if she deletes any of this data, it will be deleted on your devices as well. Note: you can all keep using the same ID for the itunes store for sharing purchased items.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/ -
Summary: The Storage Spaces UI has several problems when there are more than 21 physical disks available to Storage Spaces.
I have 28 SATA disks connected over 6 controllers. 2 are used for an Intel motherboard RAID1 for OS (PhysicalDisk0), so that leaves 26 data disks for Storage Spaces. [The plan is to get to 36 data disks in due course by adding disks (this 36-bay chassis: http://www.supermicro.com/products/chassis/4U/847/SC847A-R1400LP.cfm)]
Initially, there were 23 data disks (5x 1TB, 1x 640GB, 14x 500GB, 3x 250GB) as PhysicalDisk1-23 (in that order), which I put into a storage pool. I created a parity disk over all 23 disks. It looks like it is working fine, albeit very slowly on writes.
I've now added 3 more 4TB disks, as PhysicalDisk24-26, and taken them offline, and have now noticed errors in the Storage Pools UI in the Server Manager. For example:
* No more than 21 disks ever show up in the "Physical Disks" area in the lower right. When the 23 disks are connected, only the first 21 show up in the pool I created. With 26 disks connected, only the first 20 show up in the pool, and only 1 more of the
new 3 (PhysicalDisk26) shows up in the Primordial group.
* In the Properties of the parity Virtual Disk created over the 23 disks, the disks are shown incorrectly. Again, only 21 disks are shown, and PhysicalDisk26 is incorrectly shown as part of the virtual disk. See image:
* Using the New Storage Pool Wizard, I cannot add more than 1 of the new 3 disks to a new Storage Pool (only PhysicalDisk26 is available). And the details incorrectly refer to PhysicalDisk21. See image (a WDC WD2500JD-22H is a 250GB disk, not a 4TB disk).
Thus I cannot use the new disks in a new storage pool.
According the blog post at http://blogs.msdn.com/b/b8/archive/2012/01/05/virtualizing-storage-for-scale-resiliency-and-efficiency.aspx:
Q) What is the minimum number of disks I can use to create a pool? What is the maximum?
You can create a pool with only one disk. However, such a pool cannot contain any resilient spaces (i.e. mirrored or parity spaces). It can only contain a simple space which does not provide resiliency to failures. We do test pools comprising multiple hundreds
of disks – such as you might see in a datacenter. There is no architectural limit to the number of disks comprising a pool.
However, the UI currently does not seem to correctly work with more than 21 physical disks. Please advise.
Using Server 2012 RC.
Hardware: Supermicro X8SAX (BIOS v2.0), Intel i7-920 2.67GHz, 6x 2GB DDR3-1333 (certified Crucial CT25664BA1339.16SFD)
Disk controllers: 2x RAIDCore BC4852 (PCI-X, final 3.3.1 driver) (15 ports used), 2x Supermicro AOC-SASLP-MV8 (PCIe, 4.0.0.1200 Marvell driver to allow >2TB disks) (6 ports used), Sil 3114 (PCI, latest 1.5.20.3 driver) (1 port used), motherboard Intel
in RAID mode (4 ports used for data, plus 2 for OS RAID1).An update. I added 16x SATA disks across 2x Supermicro AOC-SASLP-MV8. All 16 disks report the same UniqueID.
I have 25 disks in the pool now (23 as parity; 2 as journal added via PowerShell). 10 of these are on the two AOC-SASLP-MV8 controllers. Only the first 16 disks show up in the UI, so 9 are missing from the UI - which is consistent with this UI bug where
only one disk per UniqueID shows up. PowerShell does work to manage the SS.
PS C:\Users\administrator.TROUNCE> Get-PhysicalDisk | format-list FriendlyName, UniqueId, ObjectId, BusType
FriendlyName : PhysicalDisk6
UniqueId : 00280000004000004FB116493C169A1A
ObjectId : {7ab38e00-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk7
UniqueId : 00280000004000001AE48E5088028D0D
ObjectId : {7ab38e02-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk8
UniqueId : 002800000040000020C9A6680224E32F
ObjectId : {7ab38e04-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk9
UniqueId : 0028000000400000FDE73E7254A60C4C
ObjectId : {7ab38e06-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk23
UniqueId : 0050430000000000
ObjectId : {7ab38e08-ab87-11e1-bbbd-806e6f6e6963}
BusType : RAID
FriendlyName : PhysicalDisk22
UniqueId : 0050430000000000
ObjectId : {7ab38e0a-ab87-11e1-bbbd-806e6f6e6963}
BusType : RAID
FriendlyName : PhysicalDisk21
UniqueId : 0050430000000000
ObjectId : {7ab38e0c-ab87-11e1-bbbd-806e6f6e6963}
BusType : RAID
FriendlyName : PhysicalDisk20
UniqueId : 0050430000000000
ObjectId : {7ab38e0e-ab87-11e1-bbbd-806e6f6e6963}
BusType : RAID
FriendlyName : PhysicalDisk5
UniqueId : 0028000000400000272BA74A52309853
ObjectId : {7ab3900f-ab87-11e1-bbbd-002590520253}
BusType : Fibre Channel
FriendlyName : PhysicalDisk19
UniqueId : 0050430000000000
ObjectId : {7ab38e10-ab87-11e1-bbbd-806e6f6e6963}
BusType : RAID
FriendlyName : PhysicalDisk4
UniqueId : 00280000004000009DE164099941430A
ObjectId : {7ab39011-ab87-11e1-bbbd-002590520253}
BusType : Fibre Channel
FriendlyName : PhysicalDisk18
UniqueId : 0050430000000000
ObjectId : {7ab38e12-ab87-11e1-bbbd-806e6f6e6963}
BusType : RAID
FriendlyName : PhysicalDisk11
UniqueId : 0028000000400000967EB0559AB4E351
ObjectId : {7ab39013-ab87-11e1-bbbd-002590520253}
BusType : Fibre Channel
FriendlyName : PhysicalDisk17
UniqueId : 0050430000000000
ObjectId : {7ab38e14-ab87-11e1-bbbd-806e6f6e6963}
BusType : RAID
FriendlyName : PhysicalDisk24
UniqueId : 0050430000000000
ObjectId : {7ab38e16-ab87-11e1-bbbd-806e6f6e6963}
BusType : RAID
FriendlyName : PhysicalDisk10
UniqueId : 0028000000400000B22A722C8AD2557B
ObjectId : {df23f916-c19f-11e1-bbf5-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk16
UniqueId : 0028000000400000DA4D24536A847E52
ObjectId : {7ab38e19-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk15
UniqueId : 00280000004000005DEDFF007783A242
ObjectId : {7ab38e1b-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk14
UniqueId : 002800000040000018C9CF6EBE605911
ObjectId : {7ab38e1d-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk13
UniqueId : 0028000000400000B64436290D155A48
ObjectId : {7ab38e1f-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk0
UniqueId : IDE\DiskOS1.0.00__\4&180adc7b&0&0.0.0:Trounce-Server2
ObjectId : {df23f925-c19f-11e1-bbf5-806e6f6e6963}
BusType : RAID
FriendlyName : PhysicalDisk31
UniqueId : 0050430000000000
ObjectId : {df241daf-c19f-11e1-bbf5-002590520253}
BusType : RAID
FriendlyName : PhysicalDisk32
UniqueId : 0050430000000000
ObjectId : {df241db2-c19f-11e1-bbf5-002590520253}
BusType : RAID
FriendlyName : PhysicalDisk27
UniqueId : 0050430000000000
ObjectId : {df241cbe-c19f-11e1-bbf5-002590520253}
BusType : RAID
FriendlyName : PhysicalDisk28
UniqueId : 0050430000000000
ObjectId : {df241cc1-c19f-11e1-bbf5-002590520253}
BusType : RAID
FriendlyName : PhysicalDisk34
UniqueId : 0050430000000000
ObjectId : {df241dc4-c19f-11e1-bbf5-002590520253}
BusType : RAID
FriendlyName : PhysicalDisk29
UniqueId : 0050430000000000
ObjectId : {df241cca-c19f-11e1-bbf5-002590520253}
BusType : RAID
FriendlyName : PhysicalDisk33
UniqueId : 0050430000000000
ObjectId : {df241dcf-c19f-11e1-bbf5-002590520253}
BusType : RAID
FriendlyName : PhysicalDisk30
UniqueId : 0050430000000000
ObjectId : {df241cd3-c19f-11e1-bbf5-002590520253}
BusType : RAID
FriendlyName : PhysicalDisk2
UniqueId : 002800000040000037638531D4A17419
ObjectId : {7ab38df8-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk3
UniqueId : 0028000000400000AB7400464090110C
ObjectId : {7ab38dfa-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel
FriendlyName : PhysicalDisk1
UniqueId : IDE\DiskWDC_WD6400AAKS-00A7B2___________________01.03B01\4&180adc7b&0&0.1.0:Trounce-Server2
ObjectId : {7ab38dfc-ab87-11e1-bbbd-806e6f6e6963}
BusType : RAID
FriendlyName : PhysicalDisk12
UniqueId : 00280000004000005396CC47AA8AD97B
ObjectId : {7ab38dfe-ab87-11e1-bbbd-806e6f6e6963}
BusType : Fibre Channel -
How can i get more local storage space on my iphone 4
I want to put more song on my iphone 4 but it keeps saying i dont have enough local staorage space. How can i get more local storage space on my iphone 4?
You don't. Delete 'stuff' you don't need or buy a phone with more storage. you can not increase or upgrade the internal storage in the iPhone.
Maybe you are looking for
-
I keep getting session time out whenever I try to purchase apps on iPhone 5. It keeps asking me to verify my credit card security number and then when I click DONE, it tells me session time out. Anyone can help?
-
How do I install Mountain Lion on my Mac?
How do I get the App Store on my Mac so I can download Mountain Lion?
-
How to Connect to ftp server in active mode using the finder
How can I can I use the finder command "connect to server" to connect to a ftp server using the active Mode. With Cyberduck I can connect to this server only in active mode. Apparently the connect to server command uses the ftp passive mode. Or is it
-
Dear all, I have the following issue. Correct situation: - Run a report that generates a ALV or list - Export the ALV into a HTML file - The generated HTML file as the correct information Incorrect situation - Run a report that generates a ALV or lis
-
Error in BAPI_PO_CHANGE - No info record exists from material and vendor
Hi, I am using BAPI_PO_CHANGE for performing material exchange in a PO. While the new exchanged material do not have any info record for the vendor, the BAPI is throwing an error " No info record exists for material ABC and vendor ABC." The funny thi