Storage space issue

Hi everyone
I basically have two issues, i have been contacted by the server maintanence staff and asked why we take up so much harddisk space.
The first issue is that it dumps a huge amounts of ord562048pas files they each only take up a few kilobytes but there are two servers in a balance load setup and they both have about 700.000 files, first of all why are these files there and secondly would it be possible not to create these files.
The second issues i have is that we have alot of mimp_ora_xxx.trc files, some of these reach size of 150mb and are generated every 5-10 minutes. looking at the contest it looks like somebody looking at the files, but is there any ways to reduce these files or avoid them in total. the contents looks like the following:
Dump file /mimp_perm/u_dumplog/mimp_ora_1133.trc
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
ORACLE_HOME = /me01p/oracle/product/9.2.0.7
System name:     SunOS
Node name:     dkd1mr0002
Release:     5.8
Version:     Generic_117350-46
Machine:     sun4u
Instance name: mimp
Redo thread mounted by this instance: 1
Oracle process number: 1155
Unix process pid: 1133, image: oracle@dkd1mr0002 (TNS V1-V3)
*** 2008-11-14 13:24:29.960
*** SESSION ID:(1157.110) 2008-11-14 13:24:29.953
S:getPos
S:type oracle.ord.media.annotator.utils.OrdBlobSeekableSource
S:getPos
S:type oracle.ord.media.annotator.utils.OrdBlobSeekableSource
S:getPos
S:type oracle.ord.media.annotator.utils.OrdBlobSeekableSource
The database used is version 9.2.0.7.0 and the application server is version 10.1.3
I hope you have all the information you need... besides that im really looking forward to hearing from you.

I don't have an answer for your first issue, I don't understand the question.
As for the second issue, the trace files with the "getPos" messages, this is a bug. The code is unconditionally printing these messages to the System.out stream.
The work arounds to this, that I can think of, are as follows (in no particular order)
1. upgrade to 10.2. The bug is not present in 10.2.0.3 and higher which is your minimum upgrade path
2. write a cron job to periodically detect and delete the trace files.
3. if you have an extended support contract (since this is 9.2) contact Oracle support and we will produce a patch
If none of the above are possible, please reply and we will see if other coding possibilities exist.

Similar Messages

First cluster - Server 2012 r2 - storage spaces issues

Hi Everyone
   We just purchased two new servers (Lenovo RD640's) and an external SAS JBOD enclosure (the Lenovo SA120), and we would like to set up a 2012 r2 failover cluster with clustered storage spaces as the shared storage. Currently they are
on their own domain with the virtual active directory server residing locally on one of the servers.
   Preface: I've created and destroyed the cluster and storage spaces multiple times trying to solve this issue, so I don't know if I may have "leftovers" from those attempts now causing issues for me.
I can create the cluster, and it passes validation, and can create a clustered storage pool, but every time I try to create a virtual disk (either through the Failover cluster manager, the server manager, or powershell), it won't attach. If
I try to manually attach it I get the message: "Error attaching or detaching virtual disk: Failed to attach virtual disk to <node name>. Access denied"
Finally (and I don't know if this is related or not), when in storage spaces on the server manager, there is a gold banner at the top that says "Incomplete communication with cluster <cluster name>. The following cluster nodes or clustered roles
might be offline or have connectivity issues: <cluster name>"
I'm logged in with full domain administrator credentials, and have been running my head against this wall for a few days now. Any help would be appreciated!

Thanks for your responses. Here is what I have to report:
When I destroy the cluster, and create the storage spaces on just one of the two servers (with the other server powered down), I'm able to create the storage pool - using all the HDDs and SSDs - and virtual disks (both tiered and non-tiered) without issue.
As soon as I create the cluster again, the virtual disks become "detached", and I'm back to the situation described initially.
@Apamnapat, here's the output of the powershell commandlets you suggested:
PS C:\Windows\system32> get-storagepool | fl *
Usage                             : Other
OperationalStatus                 : OK
HealthStatus                      : Healthy
ProvisioningTypeDefault           : Fixed
SupportedProvisioningTypes        : {Thin, Fixed}
ReadOnlyReason                    : None
RepairPolicy                      : Parallel
RetireMissingPhysicalDisks        : Auto
WriteCacheSizeDefault             : Auto
FileSystem                        : Unknown
Version                           : Windows Server 2012 R2
ObjectId                          : {1}\\CBC116\root/Microsoft/Windows/Storage/Providers_v2\SPACES_StoragePool.ObjectId
                                    ="{1cca13ee-d45c-11e3-80b5-806e6f6e6963}:SP:{1cca13ef-d45c-11e3-80b5-806e6f6e6963}"
PassThroughClass                  :
PassThroughIds                    :
PassThroughNamespace              :
PassThroughServer                 :
UniqueId                          : {1cca13ef-d45c-11e3-80b5-806e6f6e6963}
AllocatedSize                     : 24962849046528
ClearOnDeallocate                 : False
EnclosureAwareDefault             : False
FriendlyName                      : Primordial
IsClustered                       : False
IsPowerProtected                  : False
IsPrimordial                      : True
IsReadOnly                        : False
LogicalSectorSize                 :
Name                              :
OtherOperationalStatusDescription :
OtherUsageDescription             :
PhysicalSectorSize                :
ResiliencySettingNameDefault      : Mirror
Size                              : 25264456597504
SupportsDeduplication             : False
ThinProvisioningAlertThresholds   : {70}
WriteCacheSizeMax                 : 107374182400
WriteCacheSizeMin                 : 0
PSComputerName                    :
CimClass                          : ROOT/Microsoft/Windows/Storage:MSFT_StoragePool
CimInstanceProperties             : {ObjectId, PassThroughClass, PassThroughIds, PassThroughNamespace...}
CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties
Usage                             : Other
OperationalStatus                 : OK
HealthStatus                      : Healthy
ProvisioningTypeDefault           : Fixed
SupportedProvisioningTypes        : Fixed
ReadOnlyReason                    : None
RepairPolicy                      : Parallel
RetireMissingPhysicalDisks        : Auto
WriteCacheSizeDefault             : Auto
FileSystem                        : Unknown
Version                           : Windows Server 2012 R2
ObjectId                          : {1}\\CBC116\root/Microsoft/Windows/Storage/Providers_v2\SPACES_StoragePool.ObjectId
                                    ="{3407c278-597d-4d38-b877-b2eff1e8a936}:SP:{05303524-5f93-4829-b84a-44955d1eb28e}"
PassThroughClass                  :
PassThroughIds                    :
PassThroughNamespace              :
PassThroughServer                 :
UniqueId                          : {05303524-5f93-4829-b84a-44955d1eb28e}
AllocatedSize                     : 24962849046528
ClearOnDeallocate                 : False
EnclosureAwareDefault             : False
FriendlyName                      : Primordial
IsClustered                       : True
IsPowerProtected                  : False
IsPrimordial                      : True
IsReadOnly                        : False
LogicalSectorSize                 :
Name                              :
OtherOperationalStatusDescription :
OtherUsageDescription             :
PhysicalSectorSize                :
ResiliencySettingNameDefault      : Mirror
Size                              : 25264456597504
SupportsDeduplication             : False
ThinProvisioningAlertThresholds   : {70}
WriteCacheSizeMax                 : 107374182400
WriteCacheSizeMin                 : 0
PSComputerName                    :
CimClass                          : ROOT/Microsoft/Windows/Storage:MSFT_StoragePool
CimInstanceProperties             : {ObjectId, PassThroughClass, PassThroughIds, PassThroughNamespace...}
CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties
Usage                             : Other
OperationalStatus                 : OK
HealthStatus                      : Healthy
ProvisioningTypeDefault           : Fixed
SupportedProvisioningTypes        : Fixed
ReadOnlyReason                    : None
RepairPolicy                      : Parallel
RetireMissingPhysicalDisks        : Auto
WriteCacheSizeDefault             : Auto
FileSystem                        : Unknown
Version                           : Windows Server 2012 R2
ObjectId                          : {1}\\CBC116\root/Microsoft/Windows/Storage/Providers_v2\SPACES_StoragePool.ObjectId
                                    ="{3407c278-597d-4d38-b877-b2eff1e8a936}:SP:{48e0189b-db8c-11e3-80d3-f80f41fcd134}"
PassThroughClass                  :
PassThroughIds                    :
PassThroughNamespace              :
PassThroughServer                 :
UniqueId                          : {48e0189b-db8c-11e3-80d3-f80f41fcd134}
AllocatedSize                     : 17179869184
ClearOnDeallocate                 : False
EnclosureAwareDefault             : False
FriendlyName                      : Storage Pool
IsClustered                       : True
IsPowerProtected                  : False
IsPrimordial                      : False
IsReadOnly                        : False
LogicalSectorSize                 : 512
Name                              :
OtherOperationalStatusDescription :
OtherUsageDescription             :
PhysicalSectorSize                : 4096
ResiliencySettingNameDefault      : Mirror
Size                              : 24951612506112
SupportsDeduplication             : False
ThinProvisioningAlertThresholds   : {70}
WriteCacheSizeMax                 : 107374182400
WriteCacheSizeMin                 : 0
PSComputerName                    :
CimClass                          : ROOT/Microsoft/Windows/Storage:MSFT_StoragePool
CimInstanceProperties             : {ObjectId, PassThroughClass, PassThroughIds, PassThroughNamespace...}
CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties
PS C:\Windows\system32> get-virtualdisk | fl *
Usage                             : Other
NameFormat                        :
OperationalStatus                 : Detached
HealthStatus                      : Unknown
ProvisioningType                  : Fixed
ParityLayout                      : Rotated Parity
Access                            : Read/Write
UniqueIdFormat                    : Vendor Specific
DetachedReason                    : By Policy
WriteCacheSize                    : 1073741824
ObjectId                          : {1}\\CBC116\root/Microsoft/Windows/Storage/Providers_v2\SPACES_VirtualDisk.ObjectId
                                    ="{3407c278-597d-4d38-b877-b2eff1e8a936}:VD:{48e0189b-db8c-11e3-80d3-f80f41fcd134}{
                                    c1894936-db95-11e3-80d5-f80f41fcd134}"
PassThroughClass                  :
PassThroughIds                    :
PassThroughNamespace              :
PassThroughServer                 :
UniqueId                          : 364989C195DBE31180D5F80F41FCD134
AllocatedSize                     : 7516192768
FootprintOnPool                   : 8589934592
FriendlyName                      : Disk Witness
Interleave                        : 262144
IsDeduplicationEnabled            : False
IsEnclosureAware                  : False
IsManualAttach                    : True
IsSnapshot                        : False
LogicalSectorSize                 : 512
Name                              :
NumberOfAvailableCopies           :
NumberOfColumns                   : 8
NumberOfDataCopies                : 1
OtherOperationalStatusDescription :
OtherUsageDescription             :
PhysicalDiskRedundancy            : 1
PhysicalSectorSize                : 4096
RequestNoSinglePointOfFailure     : False
ResiliencySettingName             : Parity
Size                              : 7516192768
UniqueIdFormatDescription         :
PSComputerName                    :
CimClass                          : ROOT/Microsoft/Windows/Storage:MSFT_VirtualDisk
CimInstanceProperties             : {ObjectId, PassThroughClass, PassThroughIds, PassThroughNamespace...}
CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties

IMovie, iDVD storage space issues

I have transferred many clips from my cam-corder to iMac. I am now nearly exhausted for storage space. Am open to any suggestions for strategies that will recapture additional storage capacity on this machine. I thought of simply dumping the relevant video clips to the Trash Can after creating a disc (via iDVD); with the intent to subsequently bring the video back into iMovie from that very same disc so that I can fine tune the product with editing of themes; text; graphics; music etc. In other words, shuffle the product back and forth between disc and machine as my editing interests dictate. Don't know if these tasks can be accomplished as I have described. Surely there must be other strategies out there that I can explore to save valuable space on this machine???
Message was edited by: SandyBill

If you want to re-edit iMovie projects in the future, you will have to save the entire project & associated clips. While burning the clips to data DVDs sounds inexpensive & appealing, it is very time consuming, as each data DVD only holds about 20 minutes of captured clips and you're stuck with burn times, which are much slower than copying the files to an external firewire drive
So, it's time for a good external firewire hard drive (take a look at the Lacie d2 Extreme drives, for example).
And while it is technically possible to re-import video from a playable DVD such as ones you burn with iDVD, there is a significant loss of quality when you do the back conversion. Plus, you won't be able to 'shuffle the product back and forth between disc and machine as my editing interests dictate' because your editing commands are not preserved forward when you go from iMovie > iDVD > playable DVD. If you want to do that, you need to preserve your full iMovie project and associated video clips and other source media files.

Storage space issues after purchasing additional storage

While downloading daughters 4th movie on iPad, a note comes up saying insufficient space need to manage your storage. So I delete some of the apps she wasn't using, that wasn't enough so I purchased her an additional amount. Still problems! Help please

You have purchased iCloud storage, that has nothing to do with your iPad storage. Contact with iCloud support to get a refund > http://www.apple.com/support/icloud/contact
You have to delete more things from the device if you want to watch the movie. Open Settings > General > Usage, and delete data that you don't need or want

Issue to create Workbook BI7 - No roll storage space of length 1984 availab

Hello,
I am creating a workbook in BI7 Analyzer Excel doing the following: design mode, insert analysis grid, selecting the query as data provider. However, when I click to get out of design mode or change variable values, it starts processing without asking me to fill the variable screen. It takes a ong time until an error message appears: No roll storage space of length 1984 available for OCCURS area. area.
If I go to open query and execute it, there is no problem. The issue only appears in the workbook.
Could you please suggest some solution?
Thanks & Regards,
Adriana Oliveira
Edited by: ADRIANA OLIVEIRA on Sep 29, 2009 3:28 AM

SAP Gui 640 as of now is no longer supported, for BEx 7.0, its best you use the latest GUI version and its latest patch.
Below is the list that might help u get rid of this error.
1) SAP GUI 7.10.
2) BEx 3.x or 7.0 (or both)
3) Patch > 12.
4) BW Addon.
5) BI Addon.
Install it in the same order, and make sure you restart your system (Local Machine) whenever it asks you to.
Rgds,
Sree.

Issues with exporting movie - insufficient storage space

Hello,
Last night I tried to export a 50 minute movie that I created - I checked my hard disk space and I had 4.3Gb available at the time. I didnt think I would have enough space to export in 720p resolution but tried anyway. Imovie started to create the movie but stopped ~60% through stating that it had insufficient storage space to complete the export. But now, instead of having 4.3Gb available I only have 335 Mb available as I believe Imovie did not delete the unfinished file when it cancelled the export (its storage usage went from 500 mb to 4.3gb after the failed export). The issue is, I now have to way of accessing the unfinished file to delete it and do not have enough storage space to export at a lower resolution! Has anyone else run into this issue?
Is there anyway to access the files embedded in iMovie?
If not if I delete iMovie do my saved projects remain?
Otherwise is there anyway to export my movie onto my computer directly?
I unfortunately did not back up the iPad prior to the export so I cant restore it from a previous point.
Really appreciate your help!

Sadly you are rather stuck at this point.
This appears to be an error in movie that does not clear the space if it is unable to finish creating a movie.
Your 50 minute video would be about 4 gb by my estimates.
imovie would first create this video within the app (apps are sandboxes and must create files within their own memory area).
Once the video is made, iMovie can copy this video to the camera roll.
The way iOS works is to avoid mixing data, thus it is a copy process.
Which means you would have to have 8 gb of space to create your video.
I am going to guess that iMovie correctly made the video, but now has no where to copy it.
And rather annoyingly it holds on to the video for now.
You need another 4 gb space to compete the export.
As you have not enough space left on the iPad you are in a bind and there are only a couple of options left for you.
Firstly, if you delete iMovie iOS you will lose your projects.
I do not advise deleting iMovie.
You cannot export the project, and iMovie iOS projects contain the source video.
So you would need about 4gb of space to export the project.
Also do not delete the source videos, iMovie just links to the camera roll.
So if you delete the video from the photos app then iMovie will lose the video too.
There is no way that is Apple sanctioned to clear the space in iMovie.
Apple has strict rules on what we can discuss in these forums, so I cannot help or advise how to clear iMovie of the half made video.
My best advise would be to delete another app, or files from your iPad.
I hope you have at some point backed up your iPad to your Mac, of iCloud?
If not then do so now.
Then I would suggest you delete large apps to clear space.
These can be restored later.
Look for games or apps that save their user data online.
I have a few Gameloft games, and they store my game data on their servers.
This way you can restore where you were later again.
Or you could connect to iTunes, and delete all the music off the iPad.
THen finish exporting the video, and restore the music later.
Have a look here to see how to use iOS to check what other apps are using space:
http://ipadinsight.com/ipad-tips-tricks/how-to-see-how-much-space-is-being-used- by-each-of-your-apps-in-ios-5/
Good luck, and I hope it works out for you..

Storage spaces + Hyper-V with multiple 1GBe nics for storage?

Hi guys!
So I just got my private cloud hardware. I actually put in the order before summer, but due to firmware and certification issues on my desired SuperMicro JBODs delivery was seriously delayed. So much that I've completely forgotten my networking ideas. I
need help/verification. Or at least a URL - most described setups are 10 GBe nowadays... Or even a "not gonna work" :-)
My setup is supposed to be a 3 JBOD, 2 head node storage spaces/sfos cluster providing storage to a 4 node Hyper-V cluster. I didn't have a budget for a 10 GBe setup, but got a great price on a lot of 1 GBe nics. After allocating management, Hyper-V, etc
I have 3x 1 GBe ports left on all Hyper-V and Storage servers.
I think my original plan was to create three subnets and add one nic from each server. And then I guess I've imagined some kind of SMB3 magic discovering these paths between Hyper-V and storage and just aggregating bandwitdh and providing fault tolerance
by sprinkling fairy dust. Must have been the heat...
So now I'm "replanning" and I realize that I'm going to create a failover cluster at the storage level providing a cluster name and IP. I'm thinking the management subnet where domain info resides is appropriate, but then what about the other three
subnets? I don't want to flood my management subnet with storage traffic, but do want bandwidth and resilience. Did I make a design error, and how do I make the best of the situation?
Disclaimer: My previous experience on virtualization clusters is ISCSI SAN and 2008 R2 Hyper-V clusters. Storage Spaces is completely new to me :-)
And due to overlapping technologies I struggled a bit on placing this thread. Hope I got it right

Hello,
i did not understand how many NICs you have in each Host. Hyper-V Cluster with 1 GBe NICs work as long as you know that it is not 10 GBe.
In this article is the complete Hyper-V Cluster design in checklist form. I think you should work with this list for some further ideas:
http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
Sorry that i cant give a better answer, but i lack information about about your environment.
Regards,
Thomas
Thomas Hanrath [MCT | Regional Lead Germany] |
http://www.hanrath.de
Microsoft Learning Blog |
http://blog.microsoftlearning.de
MCSE | Private Cloud

Removing disk from a volume storage space 2012 r2

Hi, I've got a issue, here's my situation, i'm using storage space on a windows server 2012 R2 for my backups. Fisrt I had 14 3tb disk in mirror so there was 19tb usable for date. Now I needed more space so I just added 14 more disk and I extended the virtual
disk to 38tb. Then when I wnet into windows management -> disk management to extend the partition to use the full 38tb, I got the following error message
Virtual Disk Service error:
The volume cannot be extended because the number of clusters will
exceed the maximum number of clusters supported by the file system
Then I realized that the cluster size where only at 8k, reading on the Web i understood that I couldn't get more then 32tb.
Now I would like to remove all of the 14 disk I just added in the pool and create a new pool with 64Ko cluster size so I wont worry about my next size upgrade.
I'm afraid that even if windows see the added space has a not allocated space, the storage pool is now using the disks. I can't afford to lose any data.
How can I proceed??
I saw procedure on this site but they seem's to be for removing 1 disk... since I have 14 disk fully integrated in my pool I am a bit nervous following a one disk procedure
thank you

Hi,
As you have already added the 14 new disks into your existing pool, you will need to check if virtual disk is already extended onto these new physical disks.
If not, you should able to remove them from the pool - if virtual disk is already extended onto these new disks, It will ask for replacement to replace them with new hard disks.
If a part of hard disks could be removed, maybe you can migrate data onto these hard disks (no need to create a storage pool), delete the existing pool to recreate and migrate files back.
If you have any feedback on our support, please send to [email protected]

How is it possible to cancel (not suspend) a video download from iTunes Store (iPad under iOs 6)? (I do not have sufficient storage space on my iPad)

Hi,
I am facing the following difficulty with my iPad (model MD369NF/A) under iOs 6.1.3.
I have bought 2 videos on iTunes Store, but I do not succeed in downloading them: an error message mentions that iPas does not have enough storage capacity.
As a matter of face, when I look at the way the storage is used, I find “Others” for around 10 Go (is there some king of reserved space for the downloading of videos from iTunes Store?), and only a very small number of Mo available.
I would simply like to cancel the downloading of the 2 videos, and hope that it would free the "Others" storage space (in the hypothesis that "Others" is space reserved for videos once downloaded), but I do not manage to do it. I can suspend the downloading, but I do not see how to cancel it.
Would you have a solution to propose ?
Thanks in advance for your help,
Nicolas

Hey Nicolas36,
Thanks for the question, and welcome to Apple Support Communities.
The following article outlines issues with free space, capacity, and a large amount of "other" space. You'll want to connect your iPad to your computer with iTunes to follow the steps:
iOS: 'Not enough free space' alert when trying to sync
http://support.apple.com/kb/TS1503
One symptom of this issue will be displayed in iTunes where the Capacity indicator for the iOS device will report a large amount of "Other" disk usage for the device. To resolve this issue:
- Turn off the music or photo sync option in iTunes for the device.
- Click Apply to sync the changes to the device.
- Turn the music and photo sync options for the device on again.
- Click Apply again to try to sync the device to iTunes.
Thanks,
Matt M.

Windows Server 2012 Storage Spaces Simple RAID 0 VERY SLOW reads, but fast writes with LSI 9207-8e SAS JBOD HBA Controller

Has anyone else seen Windows Server 2012 Storage Spaces with a Simple RAID 0 (also happens with Mirrored RAID 1 and Parity RAID 5) virtual disk exhibiting extremely slow read speed of 5Mb/sec, yet write performance is normal at 650Mb/sec in RAID 0?
Windows Server 2012 Standard
Intel i7 CPU and Motherboard
LSI 9207-8e 6Gb SAS JBOD Controller with latest firmware/BIOS and Windows driver.
(4) Hitachi 4TB 6Gb SATA Enterprise Hard Disk Drives HUS724040ALE640
(4) Hitachi 4TB 6Gb SATA Desktop Hard Disk Drives HDS724040ALE640
Hitachi drives are directly connected to LSI 9207-8e using a 2-meter SAS SFF-8088 to eSATA cable to six-inch eSATA/SATA adapter.
The Enterprise drives are on LSI's compatibility list. The Desktop drives are not, but regardless, both drive models are affected by the problem.
Interestingly, this entire configuration but with two SIIG eSATA 2-Port adapters instead of the LSI 9207-8e, works perfectly with both reads and writes at 670Mb/sec.
I thought SAS was going to be a sure bet for expanding beyond the capacity of port limited eSATA adapters, but after a week of frustration and spending over $5,000.00 on drives, controllers and cabling, it's time to ask for help!
Any similar experiences or solutions?

Has anyone else seen Windows Server 2012 Storage Spaces with a Simple RAID 0 (also happens with Mirrored RAID 1 and Parity RAID 5) virtual disk exhibiting extremely slow read speed of 5Mb/sec, yet write performance is normal at 650Mb/sec in RAID 0?
Windows Server 2012 Standard
Intel i7 CPU and Motherboard
LSI 9207-8e 6Gb SAS JBOD Controller with latest firmware/BIOS and Windows driver.
(4) Hitachi 4TB 6Gb SATA Enterprise Hard Disk Drives HUS724040ALE640
(4) Hitachi 4TB 6Gb SATA Desktop Hard Disk Drives HDS724040ALE640
Hitachi drives are directly connected to LSI 9207-8e using a 2-meter SAS SFF-8088 to eSATA cable to six-inch eSATA/SATA adapter.
The Enterprise drives are on LSI's compatibility list. The Desktop drives are not, but regardless, both drive models are affected by the problem.
Interestingly, this entire configuration but with two SIIG eSATA 2-Port adapters instead of the LSI 9207-8e, works perfectly with both reads and writes at 670Mb/sec.
I thought SAS was going to be a sure bet for expanding beyond the capacity of port limited eSATA adapters, but after a week of frustration and spending over $5,000.00 on drives, controllers and cabling, it's time to ask for help!
Any similar experiences or solutions?
1) Yes, being slow either on reads or on writes is a quite common situation for storage spaces. See references (with some of the solutions I hope):
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/a58f8fce-de45-4032-a3ef-f825ee39b96e/
http://blogs.technet.com/b/askpfeplat/archive/2012/10/10/windows-server-2012-storage-spaces-is-it-for-you-could-be.aspx
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/64aff15f-2e34-40c6-a873-2e0da5a355d2/
and this one is my favorite putting a lot of light on the issue:
http://helgeklein.com/blog/2012/03/windows-8-storage-spaces-bugs-and-design-flaws/
2) Issues with SATA-to-SAS hardware is also very common. See:
http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/5d4f68b7-5fc4-4a3c-8232-a2a68bf3e6d2
StarWind iSCSI SAN & NAS

IOS 8: iTunes Match hogging huge amount of storage space on iPhone (6 Plus)

Hi there!
I use iTunes Match for a long time now, Have about 18k Songs in in all tagged incl. covers (compressed with JPEG mini app)
After updating to iOS 8, I'm quite sure that Match seems to be the root of a massive use of "other" storage space on my new iPhone 6 Plus. I opted for the 16GB because I thought I don't need more because of iTunes Match. Apparently I was mistaken as the baseline design by Apple is no longer sufficient for using the basic services Apple provides. I tried to solve the problem by restoring the Phone two weeks ago, but the problem reoccurs no matter wether I create a new iPhone and activate iTunes Match or restore it form an iCloud Backup.
I made some screenshots to show the problem:
Note that I have deleted every single cache-file prior to this screenshot and that there is not a single music file on the iPhone.
There also still seems to be a problem with the delete-function integrated in iOS, as music-data is not always wiped, but that's old news I think:
After experimenting with deactivating and activating iTunes Match on the phone and downloading a short album (~50MB) for testing purposes, this happened:
I am out of ideas how to fix this...Applecare is more or less not available right now here in Germany because of the iOS 8.0.1 disaster.
I'm really ****** of as more and more space is eaten up on my phone without even having any use of it. Restoring my iPhone every 2 weeks can't be the answer.
Does anybody have an idea how to fix this? Is this problem a known bug and fixed in iOS 8.1?
Any help is appreciated
Kind regards,
Thorbjörn

Hello Dan,
I am having the exact same issue except mine might be a little worse. I restored my phone and "set up as new" about 3 times. I didn't have much to lose as far as "backup" was concerned so I just went ahead and wiped the whole phone clean. I am missing 10gb.
I Have accepted the fact that iOS takes 5.2GB of storage to run my phone (which is ridiculous). I have also added up all my used data in the "manage storage" portion in setting and it adds up to about 2gb. So basically I have about 10GB unaccounted for. I chatted with apple twice and talked to supervisors and they all tried to walk me through the same process of restoring, rebooting, clearing cache, resetting etc. nothing has worked. I've come to the conclusion that it's a faulty flash drive and we just need to return our phones for new ones. Nothing can be done.

Possible Bug in iOS 8 via Streaming iTunes Video results in lost storage space?

Hi looking for suggestions or help on this issue if you can.
I'm not sure if the issue is my attempting to stream a movie from iTunes under iOS 8 or if it is a result of the iOS 8 update (size) itself or some type of memory leak or inability of memory to be released back to the OS.
This AM I had ~4.8GB of free space on my 16GB iPhone 5C; running under iOS 7. I then updated to iOS 8 by connecting the phone to my iMac and doing the install through iTunes under a USB wired connection. I however I did NOT check after the update how much space was "Available" after the update on the iPhone itself.
While streaming a long movie (LOTR extended) from the iCloud through the Apple Video app; now under iOS 8, I received a notification that my Storage space was nearly used up. While looking in Settings\Usage\Storage I can see that I had roughly 250MB of space "Available" but only 12.7GB was "USED." Here is were things get strange. Looking into the "Manage Storage" section I added up all of the space "used" by the apps listed (Video app was NOT listed) and came up with a sum of 6GB of used space. Now why is that? The listed 12.7GB of used space is not equal to 6GB what is using up the remaining 6.7GB?
Now my research of the web suggests iOS 7 was ~3.5GB in size and my best GUESS at iOS 8 is that it is a16GB - 12.7GB = 3.3GB; although I thought iOS 8 was going to use up more space? For the sake of argument lets say iOS 8 is 5.8GB and my calculated Used Space it 6GB, that equals 11.8GB. Where are the remaining 4.2GB?
Keep in mind I added No new apps (albeit a few updates to FindMyFrieds, Remote, Pages, AirPort Utility, FindMyiPhone all to be iOS 8 compatable). I also force quit the VIDEO app thinking that the video that was streaming was taking up local storage while it was playing. Is it possible that the memory was used up by the stream and is not being Released; hence it seems I have no available space?
Powering the phone down and re-starting it did not seem to do anything.
I still need to go home, connect to iTunes and double check if the available space on the phone matches to what iTunes see.
Thanks and sorry for the long question, just wanted to get as many variables out there in case anyone else has had this issue.

searching.4.answers . . . sounds like you too were able to "inform" your device that the content is no longer needed, great. I posted a solution that later didn't work for me when I streamed another video (see my post dated Nov 1 - cjdmedia). I then had great success using what others in this forum have suggested . . . I downloaded the free ibrowse app (do a quick google search for this and you'll find the website for it). Sure enough it was a piece of cake to navigate to the iCloud assets folder and find and delete the video file. That is my solution from now on. Unfortunate that I need to do that to have my storage space clear.
Also in my post I shared that I thought this was a bug, unfortunately I now believe that this could be intended behavior. The only question is how long does this data just sit there until it is removed by the system? or is it removed by the system? If it is not removed by the system at some point then a strong argument could be made that this is a bug. Streaming means that data is not permenantly saved on the device, right?
My fundamental issue is that I have 16GB storage that really means I have a total of 12.8GB (so says my iPhone). With no personal photos or videos, only 300MB of music, some books etc, and all the apps I want installed on my iPhone I end up with only 9GB available for anything else. A typical movie in HD takes up half of that. Not aware that the data of movies was being stored on my phone while streaming I completely filled up my iPhone only days after completely wiping and setting up. When I got the notification that my phone was full when trying to take video of my kids Trick-or-Treating - I was infuriated that something was hogging the memory in my phone, perhaps I had upgraded to iOS 8 too early before known issues were eliminated. I thought I had 9GB of space for pictures and video! To be fair, Apple did not ruin Halloween because my wife had her iPhone. I also know that this "issue" has been around since iOS 7 (based on my searching) and I haven't seen any confirmation it has ever been dealt with. From another apple discussion forum stream itunes purchased movies to iPad I discovered that if your device is almost full you can still "stream" because somehow the system knows how much space you have and then behaves more like what you'd expect from streaming which is interesting.
So to wrap this long post . . . it is obvious that to stream there needs to be data stored locally, but it is unclear how much data and how long this data will stay on your device. The quickest solution (requires a computer) is to use the iBrowse app and manually delete the movie files in the iCloud assets folder.

No storage space available for extending an internal table.

Hi All,
I am using Function Module : VC_I_GET_CONFIGURATION in FI related Sales Order Report to get
configuration data for fields Model/Engine and Line no.
when the program executed in Production environment, It is giving Runtime Error TSV_TNEW_PAGE_ALLOC_FAILED.
ShrtText : No storage space available for extending an internal table.
The termination occurred in the ABAP program "SAPLIBINF" in "SELECT_INSTANCES_01" . its all happening
in the above FM.
Is there any possibility to get configuration data (Model/Engine and Line no) with out using FM.
please advise me on how you would like to proceed related to this issue.
Thanks & Regards
Satish Reddy

Hi Satish,
Please go through the below links and see if you can use this to address your issue,
http://wiki.sdn.sap.com/wiki/display/ABAP/ReplacementofVC_I_GET_CONFIGURATIONforperfomance+tunning
VC_I_GET_CONFIGURATION and paging memory
Regards,
Chen
Edited by: Chen K V on May 26, 2011 2:34 PM

Storage Spaces: Virtual Disk taken offline during file copy, marked as "This disk is offline because it is out of capacity", but plenty of free space

Server 2012 RC. I'm using Storage Spaces, with two virtual disks across 23 underlying physical disks.
* First virtual disk is fixed provisioning, parity across 23 physical disks: 10,024GB capacity
* Second virtual disk is fixed provisioning, parity across the remaining space on 6 of the same physical disks: 652GB capacity
These have been configured as dynamic disks, with an NTFS volume spanned across the two (larger virtual disk first). Total volume size 10,676GB. For more details of the hardware, and why the configuration is like this, see: http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/c35ff156-01a8-456a-9190-04c7bcfc048e
I'm copying several TB from a network share to this volume. It is very slow at ~12MB/sec, but works. However, three times so far, several hours in to the file copy and with plenty of free space remaining, the 10,024GB virtual disk is suddenly taken offline.
This obviously then fails the spanned volume and stops the file copy.
The second time, I took screenshots, below. The disk (Disk27) is marked offline due to "This disk is offline because it is out of capacity". And the disk in the spanned volume is marked as missing (which is what you would expect when one of its member disks
is offline).
I can then mark the disk (Disk27) back online again, and this restores the spanned volume. I can then re-start the file copy from where it failed. There doesn't appear to be any data loss, but it does cause an outage that requires manual attention. As you
can see, there is plenty of space left on the spanned volume.
Each time this has happened, there are a few event 150 errors in the System event log: "Disk 27 has reached a logical block provisioning permanent resource exhaustion condition.". Source: Disk.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="disk" />
<EventID Qualifiers="49156">150</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-06-07T11:24:53.572101500Z" />
<EventRecordID>14476</EventRecordID>
<Channel>System</Channel>
<Computer>Trounce-Server2.trounce.corp</Computer>
<Security />
</System>
- <EventData>
<Data>\Device\Harddisk27\DR27</Data>
<Data>27</Data>
<Binary>000000000200300000000000960004C0000000000000000000000000000000000000000000000000</Binary>
</EventData>
</Event>
This error seems to be related to thin provisioning of disks. I found this:
http://msdn.microsoft.com/en-us/library/windows/desktop/hh848068(v=vs.85).aspx. But both these Virtual Disks are configured as Fixed, not Thin provisioning, so it shouldn't apply.
My thoughts: the virtual disk should not spuriously go offline during a file copy, even if it was out of space. And in any case, there is plenty of free space remaining. Also, I don't understand the reason for why it is marked as offline ("This disk is offline
because it is out of capacity"). Why would a disk go offline because it was out of thin capacity, rather than just returning an "out of disk space" error while keeping it online.

Interesting Thread, I've been having the same issue. I had a failed hardware RAID that was impossible to recover in place, so after being forced to do a 1:1 backup, I find myself with 5 2TB hard drives to play with. Storage Spaces seemed like an interesting
way to go until I started facing the issues we share.
So my configuration is A VM Running Windows Server 2012 RC with 5 Virtualized Physical drives using a SCSI interface, 2TB in size that make up my storage pool. A Single Thinly provisioned Disk of 18 TB (using 1 disk for parity)
Interestly enough, write speed has not been an issue on this machine (30~70MB/s, up from 256k on the beta)
Of note to me is this error in my event log 13 minutes before the drive disappeared:
"The shadow copies of volume E: were deleted because the shadow copy storage could not grow in time.Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied."Source: volsnap, Event ID: 25, Level: Error
followed by:
"The system failed to flush data to the transaction log. Corruption may occur in VolumeId: E:, DeviceName: \Device\HarddiskVolume17.(The physical resources of this disk have been exhausted.)"Source: Ntfs (Microsoft-Windows-Ntfs), Event ID: 140, Level: Warning
I figure the amount of space available to me before I start encountering physical limits is in the vicinity of about 7TB. It dropped out for the second time at 184 GB.
FYI, the number of columns created for me is 5
Regards,
Steven Blom

Storage Spaces: SSD tier size incorrect when using EnclosureAware option in a pool

Hi folks,
We're about to deploy Storage Spaces in our test environment, but we encountered an issue while configuring Enclosure Awareness on Storage Pools.
When we create a Storage Pool (over 3 JBOD's) and set the option EnclosureAwarenessDefault to $True, the SSD tier size automatically decreases / shrinks to 12GB (sometimes 18GB sometimes 0GB).
Without EnclosureAwarenessDefault, we get 1110 GB of SSD size available.
The same behavior is seen when enabling -EnclosureAwareness on Storage Space (virtual disk) level.
A summary of our configuration:
3 SOFS connected twice to each JBOD (LSI 9207-8e - SES 3 ) = HCL certified
3 JBOD arrays (Quanta M4600H) (Firmware Management SCSI Enclosure Service (SES-2) = HCL certified
Each JBOD array has 16 HDD and 4 SSD.
SOFS are fully patched, including KB 2913766
Below 2 screenshots:
EnclosureAwareDefault = $True
https://onedrive.live.com/redir?resid=BB5A32452CA3BD6C%21436
EnclosureAwareDefault = $False
https://onedrive.live.com/redir?resid=BB5A32452CA3BD6C%21437

Hi Partner,
Thank you for your detailed information and sorry for the delayed response.
After consulting with some senior engineers, please check the following:
Server manager does not let you set the column count of the space, which means that it is automatically selecting 6 as the column count, as there are 12 SSDs. Unfortunately, the column count must be less than the number of disks of each type in each
enclosure (limited by 4 SSDs), otherwise space creation will fail, and estimation will produce a small, somewhat random number. If you create a space through powershell and specify –NumberOfColumns 4 then it should work.
Hopefully it helps.
Feel free to let me know if you have any question. Thank your for your time.
Best Regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Storage space issue

Similar Messages

Maybe you are looking for