Storage Spaces, Get-FileIntegrity error: cannot find file

Problem:
When I run Get-FileIntegrity in PS on a file that exists in a Storage Spaces ReFS Mirror, I get the following error message:
Get-FileIntegirty : The system cannot find the file specified.  FullyQualifiedErrorId : HRESULT 0x80070002,Get-FileIntegrity (See screenshot for full error).
I tried on several different files.  I opened the files on the Storage Spaces volume to make sure they existed and could be opened.  I tried with several files.  I also tried piping Get-Item into Get-FileIntegrity (sugested
here).  I tried several variations in syntax.  No luck.
I am following the
usage from technet.
I am new to powershell and Storage Spaces.
Any ideas on how to make the command work?
Background:
I installed the evaluation version of Windows 8.1 Enterprise on new hardware (ASUS Z97, Intel i5, 8GB memory).  I have 3 drives attached: The system drive, and two 2GB drives (one is a 4Samsung, the other is a 2 year old WD Green).  Both drives
work fine.  They were in use before and I ran CrystalDiskMark on them.
Screenshot:
https://onedrive.live.com/redir?resid=D15A2F045B0DB05F!183&authkey=!AIj17nunArs0JMA&v=3&ithint=photo%2cpng

Hi kappa16,
The Get-FileIntegrity cmdlet gets integrity information for a file on a Resilient File System (ReFS) volume.
Make sure the volume is formatted as ReFS. Or you will fail to run this command.
For your question, here is the output of both situations:
Alex Zhao
TechNet Community Support

Similar Messages

  • Getting the error "Cannot copy file GEARAspiWDM.sys." while installing iTunes

    I am installing iTunes on my PC (Windows XP) but I am getting the error "Cannot copy file GEARAspiWDM.sys." but the path is correct and I can copy it manually. Help!

    Hello LondonMom,
    Sorry to hear that iTunes is not installing properly.  I found an article that has steps for troubleshooting iTunes installation issues on a Windows computer:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    I recommend starting with the section titled "General installation troubleshooting" and then continue with the section titled "Additional troubleshooting" if the error persists. 
    I hope this helps!
    Best,
    Sheila M.

  • Cfthread Error, Cannot Find File "taglib.cftId"

    I am using several threads within a ColdFusion request to create PDF files.  When I run the code on my ColdFusion developers edition environment, it works just fine.  However, when I attempt to run it on another environment, I always get the same error:
    An error occurred when performing a file operation read on file MYAPPDIRECTORY\WebRoot\WEB-INF\cftags\META-INF\taglib.cftld. The cause of this exception was: java.io.FileNotFoundException: MYAPPDIRECTORY\WebRoot\WEB-INF\cftags\META-INF\taglib.cftld (The system cannot find the path specified).
    The issue is of course that ColdFusion is looking in the incorrect directory.  I researched the issue and found the mention of a ColdFusion bug, but I am curious if anybody else has run into a similar issue and if they found a workaround/solution.

    This bug does not seem to be fixed, but Zack1590's workaround will solve the problem. 
    The issue is that getSupportedTagAttributes cannot find the correct path for /WEB-INF as getRealPath does not work inside the cfthread. Luckily the results of getSupportedTagAttributes are cached in server memory. This means that if the tags are called from outside a cfthread first they will then work fine inside the cfthread. By making sure all the custom tags are called before entering the cfthread Zack1590 is able to avoid this error.
    More info: http://www.danielgaspar.com/blog/2012/12/taglib-cftld-the-system-cannot-find-the-path-spec ified/

  • ERROR: Cannot find file ...

    Can anyone help me with this? When I run my .java file, the java executable doesn't seem to be able to locate my .java file. I tried everything but still cannot solve it! Can anyone help me out here???

    OK here's what I did. I opened the command prompt, and my file's path is C:\java\a.java+. I typed +cd C:\java+ into the command prompt and then I typed in javac a.java as I was told. The command prompt then gave an output shown below.
    +'javac' is not recognized as an internal or external command,+
    operable program or batch file.*
    I then typed in a.java* and then a prompt window popped out saying, Could not find the main class. The program will now exit.* I then went on to type java class a.java* to the command prompt and then it gave an output shown below.
    Exception in thread "main" java.lang.NoClassDefFoundError: class*
    +Caused by: java.lang.ClassNotFoundException: class+*
    at java.net.URLClassLoader$1.run(Unknown Source)++*
    at java.security.AccessController.doPrivileged(Native Method)++*
    at java.net.URLClassLoader.findClass(Unknown Source)++*
    at java.lang.ClassLoader.loadClass(Unknown Source)++*
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)++*
    at java.lang.ClassLoader.loadClass(Unkno*
    I then typed in java a.java* and then the command prompt gave an output.
    Exception in thread "main" java.lang.NoClassDefFounderror: a/java*
    Caused by: java.lang.ClassNotFoundException: a.java*
    + at java.net.URLClassLoader$1.run(Unknown Source)+
    + at java.security.AccessController.doPrivileged(Native Method)+
    + at java.net.URLClassLoader.findClass(Unknown Source)+
    + at java.lang.ClassLoader.loadClass(Unknown Source)+
    + at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)+
    + at java.lang.ClassLoader.loadClass(Unknown Source)+
    + at java.lang.ClassLoader.loadClassInternal(Unknown Source)+
    OK so my problem is that when I wanted to compile my .java file, java doesn't seem to be able to FIND my .java file and thus it keeps giving errors whereby it couldn't locate my file. I also tried reinstalling Java JDK and JRE but it doesn't seem to do the trick. I followed the instructions stated in he help section on the site [www.java.com|http://www.java.com/], whereby they told me to uninstall the JRE and then reinstalling the JRE portion of Java but the same problem still exists. Can anybody solve this problem whereby Java not being able to locate .java files???
    Also here's my MSN & Email address, I want to make this easier for the people who want to help me with this problem.
    *['[email protected]'|mailto:'[email protected]']*
    *(P.S. Do not spam!!!)*
    Edited by: StarJython on Jun 16, 2008 10:01 PM

  • Every time I download a large file in safari (mavericks version) at the end i get the error cannot write file. help

    evrytime i dowload a file on my macbook pro it tells me at the end that it cannot write the File. Small files download Ok but Large files do not.
    Help Please.
    mackbook pro 13 late 2012 upgraded to Mavericks restored backup from M lion with time Machine.
    Thx

    I am experiencing this as well.  I've found a workaround.  Once you know the file has stopped (the Safari download menu says it cannot write the file) then do the following:
    1. Open the Downloads folder.
    2. Open Terminal.
    3. In Terminal type "cd " and then drag the "incomplete" .download file to terminal (this just copies the path), then hit "Return" and you will change into the directory.
    4. Type "ls -l" and you should see within the .download bundle, the complete file is actually there and complete.
    5. Now, let's say the file name is "file.mp4" type "mv file.mp4 ../" and it will be moved out of the bundle one level up into the Downloads folder.  You may need to enclose the file name in quotes if it has any special characters.
    6. You can now drag the .download container to the trash, and the file should be fine.

  • Runtime Error "Cannot find system in table file"

    I need assistance!
    I have a Blackberry Curve 8310 and have recently installed Version 4.5
    I am trying to setup my synchronization.  I have followed the steps to setup my calendar to Outlook 2007.  It tells me Congratulations! You have successfully configured the product. However, when I press Finish, I get a Runtime Error "Cannot find system in table file"
    I have uninstalled the program and reinstalled it - the same error appears. 
    Any help would be appreciated!
    Solved!
    Go to Solution.

    FIGURED IT OUT!!!  
    The following steps, which are posted on the RIM Support will work; however, I had to do it a different way.  In Step 1, it states that the ilxolkCompanion.fil is located in C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector path...however, when I searched for this file, it was actually located in C:\Program Files\Blackberry\Connectors\MS Outlook Connector.  (This could be because I upgraded from 4.2.2 to 4.5 w/o completing a clean uninstall...not too sure why)
    Once I located the file through the command prompt, I unregistered as per the instructions in Step 1.  I then followed step 2 exactly word for word...and VOILA!!!  I now have Version 4.5 working with MS Outlook 2007
     ResolutionIf the Connectors folder is still present in C\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector, follow these steps:
    Unregister the old Microsoft Outlook connector ilxolkCompanion.fil.
    Open the command prompt.
    Navigate to C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector.
    Type in the command regsvr32 -u ilxolkCompanion.fil.
    In Desktop Manager, Microsoft Outlook will no longer be listed as an available desktop application.
    Register the most current Microsoft Outlook connector.
    Navigate to C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector.
    Type in the command regsvr32 msoutlookconnector.fil.
    In Desktop Manager, Microsoft Outlook will now be registered as an available desktop application.
    Once these steps have been completed, configure synchronization again.

  • Azure mobile services error cannot find module 'azure-storage'

    this is driving me nuts for past five days now and still no solution. After asking the questing at StackOverflow and azure-storage npm, I thought of now posting the same question here so that it reaches to more targeted 'microsoft azure' experts. 
    in my AzureMobileService, I am using azure-storage npm module in one of my custom API. I have been using this for past couple of months and it was all working great, I was very happy. Until last moday it started throwing the error - 'cannot find module
    'azure-storage'. It was strange, the code that was working till morning , started failing when I came back from work, with no change of a bit in the code. I get this error where I call 'require' for 'azure-module':
    var azure = require('azure-storage');
    var retryOperationFilter = new azure.ExponentialRetryPolicyFilter();
    var tableService= azure.createTableService().withFilter(retryOperationFilter);
    and in package.json, I have
    "dependencies": {"tracer": "0.7.3", "colors" : "1.0.3", "lodash" :"2.4.1", "azure-storage": "0.4.1"},
    Today, I also tried creating a new Mobile service from scratch in my azure account. Then I created the custom API and wrote the code again from scratch. Updated package.json to include azure-storage, updated my client code(HTML/JS) to use this new service
    URL etc. and tested again, everything worked fine till it reached the same line (require('azure-storage') ) and failed again there with
    same error.
    I am at my wits end. please help. 

    ok, got it working.
    I did an npm install 'azure-storage'  to my mobile service's service directory and then it started working. 
    As I remember reading, if I just include the npm module I want to use in my mobile service's package.json, it gets taken care, installed and I don't to install myself manually.
    And thats what has been happening when my code was working till last week. 
    Also, its feels odd because the other node modules I use - like tracer or lodash - work with no manual npm install. 
    anyways, its working for now, but now I am thinking about the azure mobile's reliability

  • Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP!

    Trying to Transfer iTunes to a New computer, but I get the error message The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes --- HELP

    Did you downgrade iTunes? What version is listed in Help> About iTunes?
    If you don't have iTunes 10.5.2, download it from here -> http://www.apple.com/itunes/download/
    If you have iTunes 10.5.2, try re-creating your iTunes library.

  • Video download from SD card 2 iPad 2 interrupted, file corrupted.  Cannot find file to delete.  Does not appear in Photos, or is not visible using Windows File Manager.  Consumed 2.5G of space!  Can anyone help

    Video download from SD card to iPad 2 interrupted,  corrupted.  Cannot find file to delete.  Does not appear in Photos, or is not visible using Windows File Manager.  Consumed 2.5G of space!  Can anyone help?

    Video download from SD card to iPad 2 interrupted,  corrupted.  Cannot find file to delete.  Does not appear in Photos, or is not visible using Windows File Manager.  Consumed 2.5G of space!  Can anyone help?

  • Why do I get the error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTune." I am using iTunes9.1.1 which, I believe, is the highest for OS 10.4.11 ?

    Why do I get the error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTune." I am using iTunes9.1.1 which, I believe, is the highest for OS 10.4.11 ?

    Hello,
    Did you reinstall lately?
    My 10.4.11 Drive seemes to have iTunes 7.6.2 on it, have you tried Software update to see if iTunes is listed?
    Another 10.4.11 drive has iTunes 6.05 on it... I hate upgrading iTunes, seems worse at every upgrade.
    The 10.5.8 drive I'm booted from now has iTunes 8.02 on it.

  • None of the links in my TOC or INDEX work. Cannot find file is the error message.

    The files are on a networked drive. Win7. FM 8. I've renamed files. Regenerated. Created a new book. Nothing works.
    I do have hyphens and underscores in the file names but no other special characters.
    Need help urgently.
    The error message is:
    Cannot find file named
      \SOL\Data\TechDocs\DRAFT\Shiva\OperatorManual\096-0461-001C-1.
                 fm.
                 Make sure that the file exists.
    Note that the TOC and INDEX are listed in the book w/o a path while the body chapter has the entire path (above) listed in the book view.
    Thanks

    IIRC, FM8 had an issue with a path having more than 5 (or 6?) sub-folders. Try bringing the files up a few levels or create a mapped network drive down to the lower levels.

  • RoboHelp 10 Compile Error: Cannot find xml definition file Template Error

    Does anyone know how to resolve this error? I'm exhausted googling.
    I generated Webhelp and got the error below. When I View the Help, nothing displays; IE browser does not open the Help.
    Initializing compiler...
    Generating WebHelp 5.50 (10.0.0.287)...
    Error: Cannot find xml definition file C:\Program Files (x86)\Adobe\Adobe RoboHelp 10\RoboHTML\webhelp5Ext\template_skin\webhelp5skin.xml.
    Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.navpane.dhtml
    Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.navpane.list
    Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.toolbar
    Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.minibar
    Template Error: can not resolve macro: WT_DS_TOC_ICON_PAGE_REMOTE
    Template Error: can not resolve macro: WEBHELP_TEMPLATE.topic
    Template Error: can not resolve macro: WEBHELP_TEMPLATE.frame
    Processing TOC data...
    Processing Glossary data...
    Processing Context-sensitive-Help data...
    Updating HTML topics...
    Finished updating HTML topics in 5 sec(s) : total 431 topic(s).
    Processing Full-text-search data...
    Finished processing Full-Text-Search data in 41 sec(s)
    Applying WebHelp 5.50 Template...
    ..........................Template Error: can not resolve macro: WT_DS_SEARCHFORM_GO in C:\FuelsManager Primus\Web Application\Projects\FMHelp\Cirrus\whfform.htm
    Error: Fail to update Template file whskin_frmset010.htm
    Error: Fail to update Template file whskin_frmset01.htm
    Error: Fail to update Template file whskin_frmset0.htm
    Finished applying Template in 10 sec(s)
    Finished compiling WebHelp in 107 sec(s)
    Compilation complete.

    Why Robo 8 would remove RH10 files is beyond me.
    A reinstall of RH is sure to fix it. But if you PM me your email
    address, I can send you a copy of the file (might save you a reinstall).
    Kind regards,
    Willam

  • I get the error "itunes library file cannot be saved. An unknown error occurred (-50)."

    I recently installed iTunes on a new laptop with Windows 7.  Why do I get the error "iTunes library file cannot be saved. An unknown error occurred (-50)?"

    Have been able to resolve this issue?... I have just exeperienced it and not happy that I can't resolve it.

  • Installation error:  Cannot find a J2SE SDK installed at path C:\Program Fi

    I am installing latest version of SQL Developer, Release 1.2. I have Sun Java 2 Standard Edition Version 1.5.0 (build 1.5.0_10-b03). When I browse and select the java.exe found it comes up with error: Cannot find a J2SE SDK installed at patch
    C:\Program Files\Java\jre1.5.0_10
    I am installing the version I downloaded for Windows systems with JDK1.5.
    I have tried on two different machines.
    Any ideas?

    This is going to seem loooong, but comprehensive.
    I'd initially always suggest using the bundled
    package, since that's supposed to be a tested and
    proven combination.You know what, I'm gonna be mighty surprised if you're implying that Oracle hasn't 'tested and proven' the releases at http://www.oracle.com./technology/software/products/sql/index.html other than the first 77 MB download labeled Oracle SQL Developer for Windows... :)
    After having problems with a graphics card for
    example, installing the latest JDK might be
    indicated.Huh?!? Not a clue what you're talkin' 'bout! :S
    It's also easy for users who don't know which Java
    version to download, or even where to find it! You
    guys have proven that: although it's stated you need
    .First of all, it says right there on the download page (http://www.oracle.com./technology/software/products/sql/index.html) that:
    "JDK 1.5 (JDK 5.0) is required. This is the minimum JDK version required"
    And we've "proven that [..] although it's stated you need the JDK, [we]'ve tried running with the JRE" and have NOT been able to run the application. It just presents the user a dialog box to locate the 'SDK' manually and exits gracefully if you try to dismiss it. So, conclusively proven, the JDK (or as SQL Developer puts it, Java SDK) is required- QED.
    And given users might have several versions running
    on the same machine (I have half a dozen), sqldev
    could easily pick up a wrong version.And every JRE installation (atleast all of Sun's) make sure they update the default (via PATH and other required system variables) JRE point to the latest one installed. So if you have anything 1.5+ you're good to go; if not, you've got an incompatile JRE. Doesn't sound that hard to me!
    As for being bulky, even without the bundled JDK, it
    still is.Ya missed the point. Developers are making Java applications bulkier by including the JRE/JDK with their distributions. A SQL Developer release sans JDK is about 46 MB; with JDK that climbs to 77 MB (sizes quoted from download page linked above).
    Imagine what happens when you have, besides SQL Developer (JDK 1.5 included), some-cool-java-app that also includes the JRE/JDK it was built on; and then another-java-app that also includes a JRE/JDK... I bet JDeveloper also comes with a JDK bundled in. So, now you have FOUR copies of JRE/JDK (aside from the "have half a dozen" that probably installed themselves via Java Update Checker)!
    Here's the big picture, the savings in disk space would only be the beginning of your benefits. Here's a few others:
    - Class Data Sharing (http://java.sun.com/javase/6/docs/technotes/guides/vm/class-data-sharing.html) introduced in Java SE 5.0 provides for storing definitions of commonly used classes in a representation closer to machine code, even closer than bytecode, this reducing load and startup time. Plus all VM's launced using that particular distribution get to share the cache- Performace+ !!
    Running each app offa' it's own VM just causes multiple caches to be loaded. You just multiplied your losses! :(
    - Sun is currently working on a way to have applications simply inject into a running JVM. That way, there is no load and startup time for the JVM, just the time to load you app classes. Using different distros would completely defeat this!
    (The reason why this feature isn't out yet is because they're still trying to make it possible to specify hitherto VM configurations like security and logging as application configurations. Then there's also the issue of setting up class loading boundaries between applications.
    You say you don't have to bring over the VB runtime
    for each app? I remember in the 90's doing it all the
    time. Of course, being MS, now that's not necessary
    anymore, since it's "magical" Windows. I don't have
    any machine from Sun, but for sure they've got Java
    bundled with it, right?I don't believe you had to do that since VB 5; and that's because MS realized that they messed up on this very point upto then! Sun worked the simple solution to that into their deployment strategy- install only ONE runtime and run all apps off that. As for you're half-a-dozen, I think you can safely uninstall the five older versions; because, even today, people are running apps developed using JDK1.1 on Java SE 6.0!
    Again, I find the most logical difference between JRE
    and JDK being the debugger. As you say it yourself:
    JRE for end-users, who don't need to do any
    debugging.
    Now, sqldev is not just a table browser, but also for
    debugging PL/SQL. 1 + 1 = 2.I think it's a little naive to differentiate between the JRE and JDK on just the debugger! Aside from the obvious inclusion of a compiler, the JDK has several other tools for monitoring/managing the heap, threads and logging on the fly. There's also the Doclet API and Sun's javadoc implementation, dev interfaces for instrumenting the VM, native interfaces, ...
    And I reiterate, we're talkin' PL/SQL developers here. Why would I want to give a PL/SQL developer a Java Development Kit?!? ;|
    Nevertheless, as said in the other thread, if the
    team discloses how to circumvent the SDK check at
    startup, you can go ahead and use the JRE. In any
    case, you'd have to agree that won't work as
    out-of-the-box solution...You're right, it won't work like a standard Windows OOTB app. But, it WILL work as a Java OOTB that only mandates that there be a JRE available; just like the scores of Java apps out there- from tiny little Pong clones to large IDE's like NetBeans.
    BTW, don't even think about quoting Websphere/Rational/Eclipse as counter-arguments. They are the biggest offenders as far as this issue goes. And jikes is an abomination, a curse Sun must carry as a result to opening the VM Spec. But, I digress...

  • [SOLVED] internal error Cannot find suitable emulator for x86_64

    Hi,
    After a reboot due to unrelated issues, virt-manager is not showing any of the VMs I had configured via qemu:
    I checked connection properties, and everything else is showing up correctly, like the networks and storage. I tried to create new VMs out of existing storage and got this message:
    Googling it suggested this happens when KVM module is not loaded. I modprobed kvm, kvm_intel and still got same result.
    Systemd gave me the following:
    % systemctl status libvirtd
    libvirtd.service - Virtualization daemon
    Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled)
    Active: active (running) since Sat 2013-06-08 08:55:19 IST; 29min ago
    Main PID: 1499 (libvirtd)
    CGroup: name=systemd:/system/libvirtd.service
    ├─ 834 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf
    ├─ 863 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/nat_static.conf
    ├─ 881 /sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/closed_dhcp.conf
    └─1499 /usr/bin/libvirtd -p /var/run/libvirtd.pid
    Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
    Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
    Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
    Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
    Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
    Jun 08 09:07:48 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
    Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
    Jun 08 09:08:20 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
    Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
    Jun 08 09:08:35 core libvirtd[1499]: internal error Cannot find suitable emulator for x86_64
    Googling that seems to indicate that this happens when virtualization is disabled by BIOS. But cpuinfo tells me that vm is supported:
    % grep vmx /proc/cpuinfo | uniq -c
    8 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid
    Can anyone help me? Has anyone else faced a similar problem?
    Here are some version info:
    local/libvirt 1.0.6-1
    API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc)
    local/qemu 1.4.2-1
    A generic and open source processor emulator which achieves a good emulation speed by using dynamic translation.
    Of which, qemu got updated just today. I will try rolling back to older version and post and update.
    Ninja edit: Looks to be qemu. Just running qemu gives me this error:
    % qemu-system-x86_64
    qemu-system-x86_64: error while loading shared libraries: libiscsi.so.1: cannot open shared object file: No such file or directory
    EDIT: The resolution was
    pacman -S libiscsi libaio
    systemctl restart libvirtd
    EDIT2: Made subject line better searchable
    Last edited by railmaniac (2013-06-08 04:19:24)

    HI,
    First of all thanks a lot for this post. I am facing the same issue since yest.
    After reboot, my VMs gone missing and even virt-manager was not working (as shown in the screenshots which you have pasted in your post).
    Now after trying out the workout which you had mentioned, I am able to get the virt-manager working.
    But I am not sure if I can get back my missing VMs .
    I am new to linux. Kindly guide me on how I can get back those VMs.
    [root@skoduri lib64]# ls /etc/libvirt/qemu/
    networks  rhel6-vm2.xml  rhel6.xml
    [root@skoduri lib64]#
    [root@skoduri lib64]# ls /etc/libvirt/storage/
    autostart  default.xml  storage_1.xml
    [root@skoduri lib64]#
    [root@skoduri lib64]#
    Thanks,
    Soumya

Maybe you are looking for