Storage type indicator in material master

For a combination of a particaular plant+WH no, a material can have ONLY ONE storage type indicator defined..is it correct?
What if I need multiple storage type indicator for a specific plant+WH combination.
Regards.

>
Prajith KP wrote:
> For a combination of a particaular plant+WH no, a material can have ONLY ONE storage type indicator defined..is it correct?
>
> What if I need multiple storage type indicator for a specific plant+WH combination.
>
> Regards.
You can have multiple storage type indicators for a warehouse. However for a particular material, only one storage type indicator may be used for picking and putaway.
You would normally require storage type indicators for different search strategies. You may use an exit for the strategy.
Regards,
Aroop

Similar Messages

  • Storage type indicators in Material master

    Hi all,
    I have created the list of Storage type indicator as follows,
    <u><i><b>Storage type Indicator</b></i></u>
    A01     A     FIF
    A01     E     ARD
    A01     E     ATD
    A01     E     CGD
    A01     E     LGT
    A01     E     RSK
    For stock removal  storagetype indicator is only FIF
    For Stock placement  storagetype indicator is ARD,ATD,CGD,LGT,RSK
    When i create a material in Material master ,for the WM view ,
    the fields stock removal & stock placement having list of all the Storage type indicators.
    AS per requirement ,The fields stock removal & stock placement (material master )should contain only the relevent storage type indicator.
    Please suggest me how to do the same...?
    Thanks & regards,
    Dhanapal

    Hello Dhanapal,
    In material master you can maintain only one storage type indicator for putaway and one for removal, now based on this indicator you need to define the putaway storage type search stretagy so it will be optimized to find the storage bin.
    For example,
    As per the business requirement material ABCD must go to Storage type 001 and material BCDE must go to Storage type 002
    so in above case,
    Define storaget type indicator ARD and assign it to material ABCD, then in configuration you define putaway storage search as 001 with that ARD indicator.
    In the same fashion you can define 002 for the another material.
    Hope this helps.
    Regards,
    Arif Mansuri

  • Spare part indicator in material master

    Hi Gurus,
    Where can i select spare part indicator in material master.
    regards
    Kaisar

    Hi Gurus,
    i have created a process order and did not do its confirmation, but did its delivery. After that, mistakenly 553 movement type was done by my colleque. To quality scrap. Now how could i get back the material to unrestricted. I tried with 554, but in this, all the compoents of the BOM are being issued thru 261.
    But thats not the requirement, i just want to reverse the header material to unrestricted.
    Please advice.
    regards
    Kaisar

  • Discount in kind indicator in material master

    Hi,
    where we found discount in kind indicator in material master. what is the functionality of this?
    Regards
    Rifaie

    Hi
    Check in purchasing view . MARA-NRFHG. Field name in the screen would be "Qual.f.FreeGoodsDis."
    Material qualifies for discount in kind
    Specifies whether and for what areas the material qualifies for a discount in kind.
    Use
    This indicator is presently used only in Purchasing.
    Regards
    Antony

  • Removal of batch management indicator from material master

    I had removed all batch stock from material code but when trying to remove batch management indicator from material master system is giving the message "batches already exist"
    Please suggest the solution.

    Hi,
       The material is NEW and Batch Managed.  No stocks, orders, batches are existing.
       If the Batch Management indicator is removed in Material Master, is there any way *to see/track the batch/lot * of the product.
    Scenarios: Material is NOT Batch Managed
    1.     How to track a batch received for Purchase order.
    2.     How to track a Batch created in a Production order.
    3.     How to track a Batch in Sales Order.
    Thanks,
    VB

  • 'Storage bin field in material master

    Can we increase character length of 'Storage Bin' field in material master so that bin details can be accomodated ?

    No you cant!
    Takehelp of some other field.(text field)
    Edited by: uttkarsh agrawal on Jan 30, 2009 3:11 PM

  • Default Storage location from the Material master

    Can we default the storage location from the material master into the reservation line item in trasaction MB21?

    enter the production storage location in material master MRP2 view.
    Edited by: Jürgen L. on May 7, 2008 6:52 PM

  • Default inspection Type In the Material Master

    Hello
    We have to assign two -three inspection types in the material master. How to default this inspection types in the material master always .
    Thanks
    JJ

    Dear JJ
    This you will have to do by putting validation in the material master. I dont think you have a standard solution for that.
    Or esle you can run QA08 wherein you can assign inspection type enmass.
    Please let meknow your feedback
    Regards
    Gajesh

  • How to Remove batch mangement indicator from Material Master

    Hi
    I am trying to remove batch mangement indicator from Material master..but system does not allow
    Before this .. I have done all activities also ...clear open SD documnets ,deliveriy documents ,PO documents ,Process order teco and . reservations and activae deletion flag in  batch  ... and made current period  stock an previous period  stock zero... i have cleard all documnets ...still system does not allow remove indicator..could you please guide in this issue ..how to remove batch indicator.
    Regards
    Sasi

    Hi,
    Please refer the below links.
    Re: untick Batch Manegement Indicator on Material Master
    Remove batch management flag and deletion of material documents
    How to remove Batch Management in the Material
    Re: How to remove Batch Management Check in the Material
    Thanks.

  • ABC Indicator of material master record

    Hi,
    Please explain about the ABC indicator of material master record, use and in which tab it is found?
    Regards,
    Ashish

    Hi,
    I found the answer.
    The ABC indicator is in MMC in MRP 1 tab.
    ABC Indicator classifies a material as an A, B, or C part according to its consumption value. This classification process is known as the ABC analysis.
    The three indicators have the following meanings:
    A - important part, high consumption value
    B - less important part, medium consumption value
    C - relatively unimportant part, low consumption value
    Regards,
    Ashish

  • Can not change the ABC indicator in Material master MRP1 View?

    Hi All,
    I could not change the ABC indicator in Material master for material X. Could some one please specify the condition or prerquisit for making chnages in ABC indicator?

    Hi Animesh,
    In Logistics Information system , ABC analysis can being done  and results updated in Material master for ABC indicator by background job run.
    The relevant transaction is MC40  ( Total Analysis) .
    This transaction when run in backgroung with field "Update ABC Ind.in background processing mode" clicked, will update the ABC indicator appropriately.
    You can find different criteria based on which A, B,C is decided.
    I hope this will be useful to you.
    Please check and confirm.
    Regards
    Datta

  • Please guide me how to include storage location to existing material master

    Hi Guru's,
    Please guide me how to include storage location to existing material master....
    please provide step by step process or provide any documentation that would be helpfull to me...
    please let me know of my question is not clear..
    Thanks in advance and will give full points....
    Srinivas...

    Hi
    First :- You can define the storage loctions in the plant under the customization :- SPRO -> Enterprise Structure ->Definition -> Materials Management ->Maintain storage location
    Once defined under the plant, you can create the same storage locations in the material master
    Second :- Under SPRO -> MM -> Inventory -> palnt parameters, for your plant check the field " Create Storage locations Automatically" . This will lead to create new storage locations at the time of GR, even if you have not maintained under step 1.
    Hope it answers your question.
    Regards,

  • Storage Condition field in Material Master Grayed Out.

    Hi folks,
    We are trying to use the Storage Condition field in a Material Master Plant Data/ Storage Location View. However I noticed the filed is grayed Out.
    Then I looked at the Configuration in "Field Selection for Data Screen**" and the selection group 87 which is already selected as Optional which means it should let me pick the Storage Condition field.
    **(SPRO->Log Gen->Mat Master->Filed Selection->Maintain Field Selection for Data Screen.)
    Please note,  I have already created Storage Conditions in SPRO. I am not trying to create new conditions now. I am just not able to pick one and enter it while creating or updating a Material Master.
    your input is appreciated. Thanks in advance.

    where exactly you are looking at that you are so certain that is is optional?
    In OMSR find your field selection group, then click the button on the right to the field selection group to see in which field reference it is used..
    You can probably see many many field references.
    There is e.g. a field reference for the transaction, at least for transaction MM03 your field selection should be display only.
    there is a field reference for your material type,
    there is a field reference for your industry (M, C etc ... the indicator you have to enter in MM01 initial screen)
    there is a field reference for your material type,
    Are all references (except MM03) are set to optional, or do you see references with display only among them?

  • Batch Management Indicator Required - Material Master

    Hello,
    My requirement -
    Batch management field has to be required for material Type "FERT"
    1) I created a new field selection group for the field "batch management" (MARA-XCHPF)
    2) Created a new Field Reference group with "Required" entry (OMS9)
    3) Assigned the New Field Reference to the material Type in OMS2
    The batch management Field is now a mandatory field.
    Issue is, when we try to create only the basic Data Views of a FERT material, system does not allow to save the material untill the "Batch Management Indicator" is activated (even if we are not referencing to any plant specific views of the material master.)
    We need to have the the Batch management indicator a required entry for FERT, but at the same time should be able to create material master with basic data Field only (we would be extending the plant specific views later)
    Is there a alternative method to have this setting to meet the requirements above?
    Thanks

    Hi
    I think you can check if the batch level is defined on material or client now, if yes, you may check if that can be switched to plant level. As far as I knw the basic data is for client so the field is shown on basic data view and ask to input value as you customized.
    Alternatively, I think you can use the user exit MGA00001to check the field instead of the field selection, this is called when the material master get saved, then you can write your own source code to chec if the customer filled the  field only for certain situations.
    Best Regards.
    Leon.

  • Updation of ABC indicator in Material Master

    Hi,
    For ABC analysis, I carried out it according to T_code MC40(Usage value). I got the category of material. For eg "A".But how the ABC indicator updates in Material master.Because I couldnt get indicator in MRP1 view.
    Whats the right way? Pls guide me.
    Thanks,
    Goraksh.

    Hi,
    Update of consumption is based on movement type, and you can decide which movement types should have or have not consumption updating.
    Check in transaction OMJJ if the movement types in question have indicator "Consumption posting" (field V_156_VC-KZVBU) as marked.
    If it is the case, consumption is updated, opposite for un-ticked.
    Hope that helps.
    Thanks.

Maybe you are looking for

  • BW report in BP Fact Sheet in CIC0

    Hi Gurus, We wish to display BP specific BW reports in our CIC0 fact sheet. We have configured a web template and are able to view the BW view in the CIC0 fact sheet. The issue is, that we want the BW query to run automatically based on the BP confir

  • Wireless connection problems with iTunes

    After installing iTunes for my PC(using Windows Vista if that matters). Directly after installing iTunes my wireless connection works. Once I start importing my music into iTunes I lose my wireless connection. I can still see the wireless networks bu

  • Damaged files?

    Using DiskWarrior to examine hard drives on 2 different Macs, an Intel MacBook Pro running OS 10.8.1 and on a G5 PPC running OS 10.5.8, the same file is reported to be damaged on both computers. The file is ~/Library/Preferences/com.apple.iphotomosai

  • Insert PDFs In Order Selected

    Fellow Forum Members, I'm using Acrobat 8 Standard. I need to insert external PDF in the order I select them. Currently, Acrobat is inserting all of the Files I select in an order that requires I move pages around. Is it possible to insert PDFs in th

  • Is Adobe Captivate in my cc

    Is Adobe Captivate part of my CC subscription?