Storage type & storage bin field in mb1b

Dear all,
I want to put storage type & storage bin field in MB1B from where material has been transfer through 301 movement type to another plant.Our client want to put this field manually.What is configuration regarding this?
Thanks & Regards
Dipayan Bose

Hi
I assume that you are doing transfer posting between plants which have warehouse managed.
Check in OMLR for Immediate TO Creation ''A' for mvt type 301. Remove this
In OMLJ - Remove both TO item confirmation & Propose confirmation check boxes under confirmation field group.
Remove any Auto TO indicator in IMG>LE>WM>Transfers>Define Movement type.
Now you go to MB1B and do the transfer posting with Movement Type 301.
Next step go to LT06 to create TO from Material Document No. Give the Transfer posting doc no and press enter.
Inside the transaction you have button called create TO online, click this it will take you to another screen where you can enter the Storage type. storage section & storage bin manually.
LT12 - Confirm the TO to complete the transaction
Karthik
Karthik

Similar Messages

Storage type & Storage Bin determination in MB1B

Dear all,
I want to configure the system like this-In MB1B T-Code for movement type 301 system determine storage type and storage bin from where Stock has been transfer.How I achieve this?
Thanks & Regards
Dipayan Bose

Hi
This is possible in standard SAP once you save the Material document.. Make sure your Plant and storage location have warehouse assigned.
Do transfer posting in MB1B with Mvt type 301 with Plant and storage location.
Alos ensure your material master has been extended to WM 1 & 2 views.
Check in MB03 for the Item details there is button called WM parameterer click this to see the storage type & Bin
System has to create the Transfer Requirement document then only you can see the storage type & Storage bin and this is possible once you save the transfer posting document.
Hope it is clear.
Karthik

Automated storage type and bin in wms

hi
In continuous how can we use the fixed bin method in the mm01 without using the putqway strategy
how to get the storage type and bin in the transfer order at the destination pop up.

Hi
On navigating the transaction MM01 --> Organization level , you can get a field storage type below the plant and warehouse number fields.
After entering into the Warehouse view, you can find a section
"storage bin stock"
and enter the Bin against the field
"Storage Bin"
Gobinathan G

In wms continuous to the automatic storage type and bin in the destination

hi
Thanking for givining the solution ,In continuous to the automatic storage type and bin in the destination your telling that fixed bin should be enter in the wm2 view in the mm01 ,
i am not getting fixed bin means which bin should i enter in the mm01 wm2 view can explain clearly.
thanks

First you create your WM views in MM01 with just entering the warehouse number but no storage type in the organisation pop-up.
Once you have done this and saved the material master, you do again MM01 for the same material number and select the WM 1 and 2 view and enter the warehouse number AND the storage type number in the organisation pop-up.
Now SAP gives you some more fields in WM2 view. AMong them the fields you are looking for.

Automated storage type and bin

hi
thanks for givining reply
i extened the mmo1 and while doing the lt06 this storage type is coming in the destination place but the bin not coming error is coming there is no bins in the storage type
can u tell me is there any setting required in storage type .
fixed bin means which u mentiones in wm2 view i had given only some bin which created in the storage type .is it correct.i will not activated the storage section check in storage type .
can u tell me step by step .

Hi,
Here you can find the prerquisits of fixbed bin putaway strategy:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f844834afa11d182b90000e829fbfe/frameset.htm
When you get the error message, please goto menu > Enironment > Stor. Bin Search Log - here you can see what is the problem.
In LX03 you can list the existing storage bins in your stoarge type - make sure you really have the bin.
Regards,
Csaba

Bin to bin transfer from SU managed storage type to NON SU storage type

Hi Experts ,
Kindly guide as how i can perform Bin to bin transfer from SU managed storage type to NON SU storage type
Thanks
Jinoy

There is no particular technique for this. You can use single or collective method (LT01 or LT10).
Provide the source SU and destination storage type and bin and save the TO. Your transfer will be complete.
The SU number will be lost because you have moved the stock to a non SU storage type.
Regards,
Aroop

SAP Warehouse Management change Storage Type Bin type while creating TO

My requirement is to find an exits which allow us to change the Destination Storage Bin and storage type when creating Transfer orders through Inbound Deliveries.
I have tried using "MWMTO003", "MWMTO004". But the problem here is that none of the funtion exits have both storage type and bin as exporting parameters.
The exit "EXIT_SAPLL03A_001" has Destination bin (LTAP-NLPLA) as a changing parameter but not Destination storage type.
I have activated the check box to trigger User exits using SPRO->LE->WhM->Master Data->Define Storage Type and Activate.
I got a BADI "LE_WM_STORAGETYPE_HU" with both Storage bin and type as changing parameters but then when I activate it and put a break point. My control never stops there.
Kindly Suggest what is the correct User Exit required for this?
Do i need two User Exits to change Storage Type and Storage Bin?
Kindly provide how to approach.

I managed to change the casetype now by
1) Changing the corresponding SCMG_T_CASE_ATTR entry
2) Changing the record model POID in the XML file of the case, by manually parsing and replacing the XML
Still wondering if this is a valid approach, or if I've overlooked something...

Changeability of storage type

Hi Guys,
- We are using storage type search
- 3 storage types are defined for the storage type indicator 001.
- In WM we have over 20 different storage types.
- The sorage type search works fine, it means that one of the 3
defined storage types is beeing found.
I know that the found storage type is meant as a proposal and that the user can change storage type/section/bin during processing of the transfer order (it means to select another of the restly 17 storage types defined in WM).
From business we got the requirement to avoid limit the change of the storage type and section (it means that the user should only be able to select one of the 3 storage types defined in the storage type search) , but still allow the change of the storage bin during manually processing of the TO.
The function "allow destination bin change" allows or avoids the entry of all 3 fields "storage type/storage section/storage bin". As we want onlz the bin to be changed, this functionality doesn't meet our requirement.
Do you know some options to achieve this ?
Thanks
Manuel

Is IT_FKKMAVS part of the same transport request or was it sent already earlier?
You may have a look at the request if it was OK. Probably not.
Maybe in the meantime more requests reached the system that now have in combination solved the problem. What is your release and support package level?
Higher versions of BRFplus have a lot of automatic correction mechanisms built into it.
E.g. problematic imports are collected in an import queue. As soon as a request comes in that fixes any problems the after import processing for faulty imports is automatically redone.

Change storage type. Please

Hi Guys,
We are using storage type search
3 storage types are defined for the storage type indicator 001.
In WM we have over 20 different storage types.
The sorage type search works fine, it means that one of the 3
defined storage types is beeing found.
I know that the found storage type is meant as a proposal and that the user can change storage type/section/bin during processing of the transfer order (it means to select another of the restly 17 storage types defined in WM).
From business we got the requirement to avoid limit the change of the storage type and section (it means that the user should only be able to select one of the 3 storage types defined in the storage type search) , but still allow the change of the storage bin during manually processing of the TO.
The function "allow destination bin change" allows or avoids the entry of all 3 fields "storage type/storage section/storage bin". As we want onlz the bin to be changed, this functionality doesn't meet our requirement.
Do you know some options to achieve this ?
Thanks
Manuel

Hi
Go to transaction CMOd and create a project there and activate it
then find the user exits there for transaction CO01.
you will find it there.
Or go to SE84 and look for enhancement there.
thanks
Lalit Gupta

Sorting for storage type in LM12

LM12 - change sort display so that alpha storage types with bin info displayed before numeric storage type and bin info.
The standard LM12 shows sort order for storage type as numeric storage types first then alpha storage types.
But User is requesting that alpha storage types are displayed first along with relevant info in alpha order. Standard SAP displays numeric storage type first and then alpha storage types.
Plz can any one help us to give solution for above issue.

Hi VIk,
SAP help of the customizing node (sPRO > LE > WM > Strategies > Activate Storage type Search):
If you want the system to search through the entire warehouse number for stock pick, enter "***" (stands for strignent FIFO) as the storage type. The system then will search the entire warehouse for the oldest stock of the material. The entry "+ + +" means that the system branches to the user exit to the stringest FIFO process (MWMT0013).
Regards,
Csaba
Edited by: Csaba Szommer on Jul 27, 2009 8:54 AM

Transfer of stock between the storage types in WM

Hi Gurus,
can any one tell me the proceedure how to transfer a material in warehouse between the storage types.
For example if i have a stock of 100 Nos.ina warehouse of storage type 916 (Goods issue for Deliveries) Ineed to transfer this stock to my permanent bin Storage type of 001.
Sunil

Hi
Use LT01 & create Tansfer order (TO), Input material ,plant,storage location.
Provide the required inputs like Source & destination storage type,storage section & Bin numbers.
Finally confirm the TO, it will be done.
Regards,
Ravindran

Storage area search for storage type

Hi Gurus,
iam trying to create a TO for initiainl Inventory load ( movement typer - 999), I enter the source storage type / section / Bin and dest storage type / section / Bin. Iam facing the error ' No storage area search has been defined for this material and storage type '. Please advise
thanks
Karthik

Hello,
Please check whether you have maintained storage type indicator in WM view for a material.
Also check whether you have maintaied storage type search, bin creation for the storage type.
Hope this will clear
Regards,
Prashant

Change storage type in transfer order

For next empty bin strategy, the transfer order proposes next empty bin in a given storage type. Via tx LT1E , it is possible to change a storage bin and quantity in the transfer order and confirm the same.
However, Our requirement is to change the storage type & storage bin in a transfer order already created. Is there any user exit or programme we can modify to do the same

Hi,
Pls put in MM forums and get help immediately.
Regards,
Anil

Stock transfer to physical bins from 998 storage type

Dear Experts,
As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
4) I want to print the storage units simultaneously during this process. How can I do this?
I really appreciate your help.
Thanks
Edited by: RKsap193 on Oct 14, 2008 10:35 AM

Hi,
I would suggest you to chek this link:
Re: Bin Number for the First Time Putaway
if you are not already live, then it should be possible to add the target bin field directly to the 311 movement. so you do not even need TOs to get the material into the bin for the WM go-live.
(Jurgen)
Regards,
Csaba

Storage Type and storage bin in MB26 pick list

Hi,
We want to print a pick list using MB26. The pick list should contain the warehouse number , storage type and storage bin. I have found that in the layout of MB26 pick list, we can pull these fields. However, the values of these fields are not getting pulled in the list.
Can you please help me to understand if I need to do some setting/config so that warehouse number, storage type and storage bin can be pulled in the MB26 report.
Thanks,
Shekhar

if it is a standard output if you go to the output type you can see what are the standard fields included in the pick list but if it is a custom one please contact your functional consultant who designed or look at the spec to see the design/mapping of fields.
Please let me know if thhis helps.

Storage type & storage bin field in mb1b

Similar Messages

Maybe you are looking for