Storage unit labels along with pallet labels in wm

Hello,
could you please explain how to generate storage unit label along with pallet label in wm. for example if 1pallet contains 4 boxes and each box will have20 bottles then we need to print pallet label for 4boxes and unit label for each box with 20 bottles information.
Thanks
Regards,
Pavan Kumar

Hi Pavan,
Based on your requirement and as far as standard SAP are concern there is no form which will help to generate the label in the above format. You need to take the help from development team who can design the format using SMARTFORM functionality as per your requirement. once the form is ready you can assign the print code and the SU lable form to below mentioned node. which will print the label on the printer specified
SPRO ---LE---WM ---Storage unit ---Define print control
additionally have a look on the below mentioned SAP standard link which will give you an idea about the printing of SU
Printing SU Documents Manually - Warehouse Management System (WMS) - SAP Library
Let me know if you need any further information

Similar Messages

Palletizing Material & Scanning Box Label Or Pallet Label Using HU OR SU

Hello dear WM and MM experts,
I'm looking at two scenarios here:
A) If a company is trying to track box-level information (unique box number and LB per box), and pallet-level information as well (unique pallet number and total LB of all boxes in a pallet):
Are Handling Units the solution? I assume they'd have to create a HU for each box and another HU for the pallet containing those boxes, correct? I know you cannot nest Storage Units, so under scenario A), SUs wouldn't work correct? Or is there a way to use SUs for this?
B) If a company is trying to track pallet-level information ONLY (unique pallet number and total LB of all boxes in a pallet):
Since no nesting is needed, I guess they could also use SU for this, correct? What's easiest to use under scenario B), HU or SU?
What we'd be doing with those pallets is shipping them to customers, shipping them to other plants, moving them from storage location to storage location, goods issue them to process orders, scrap them, and goods-receive them against process orders (We would be creating custom transactions to for RF devices to scan every box label or every pallet label with the "SU or HU" associated with it in order to do this).
-Your advice is greatly appreciated.

Hi Oscar
The important information which is missing scenario 1 is tracking at what level upto shipment level or within warehouse, Hopeing that tracking is required up to shipment level then u r right Handling unit is the solution and as you correctly mentioned nesting of HU is one option which can solve the requirement as mentioned in the scenario
for scenario 2 the easiest option is to use SU management with conversion factor maintained in material master e.g.
1 PAL = 1 PAL
10 BOX = 1 PAL
When i look at the overall requirement mentioned in the third scenario then i believe you need HU management for Second scenario also as you want to track the information up to customer level / receiving site level or you can think to use the functionality of PICK HU for outbound delivery
Hope my answer is in line with the query raised by you

Difference between Storage Unit type and storage type

Hi,
I am confused with storage unit type and storage type.
Can anyone help me with real case examples.
I would like to know about Storage unit types and their uses in WM.

Hello!
Storage type is a storage area and Storage Unit Type is strategies are used in the warehouse process for creating transfer orders.
A storage type is a storage area, warehouse facility, or a warehouse zone that you define in Warehouse Management (WM) for a warehouse number. This is a physical or logical subdivision of a warehouse complex that is characterized by its warehouse technique, the space used, its organizational form, or its function. A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM).
See also:
https://wiki.sdn.sap.com/wiki/display/ERPSCM/WMOrganisationalStructure
http://help.sap.com/saphelp_470/helpdata/en/c6/f838f94afa11d182b90000e829fbfe/content.htm
Storage Unit Type is putaway strategy, the system processes different storage unit types (for example, pallets) and allocates them to the appropriate section. Often, one storage bin is divided into several smaller sections. Typically, only the same storage unit types can be placed into a storage bin at one time.
See also:
http://wiki.sdn.sap.com/wiki/display/ERPSCM/PutawayandRemovalStrategiesin+WM
http://help.sap.com/saphelp_470/helpdata/en/c6/f844c44afa11d182b90000e829fbfe/content.htm
Milca

Storage Unit Inconsistency!!

Dear Experts,
One background job in SAP which runs every 10mins got canceled because the storage unit was inconsistent with the transfer order data. I am not able to find the cause of this inconsistency of storage unit!!
Any ideas??
Regards

Can I know what kind of error (details of inconsistencies) you are getting?

Create transfer order for moving storage units

Hello guys,
I need to create transfer order for moving storage units, the same with the transactions LT09, I found this FM 'L_TO_CREATE_MOVE_SU' but no work, somebody have an example for this FM, thanks a lot!

Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian

Driver program for Pallet label or Handling unit

Hi Friends,
Could any one give me The standard driver program for Pallet label for Handling unit

Hi Jyotiswaran,
It can be without HU managed. You need to use SU (storage unit) managed storage types.
When you do GR for inbound delivery and create a TO for stock putaway, by using the palletisation data in WM view 2 system generates the storage units. The same can be treated as the pallet number.
Regards,
Sudhir

To print transfer order and storage unit labels in lt31

Hi SAP Gurus
1>Is it possible to print Transfer order and Labels simultaneously in tcode LT31(At a time when LT31 is executed
If yes please guide me the selection parameter in Tcode LT31 and if any configuration required in the background
2>Is it possible to print Transfer order and storage unit labels automatically when MIGO is posted.what are the settings required
My client raised a query that before he was able to print both once Migo is posted .But now only trnasfer orders is getting printed but not SU.
Requesting to help in this issues
Thanks in advance
Regards
chandu

you need to define the print control parameter in the customizing and whether you can print both(SU & TO) is depend on the print code which you specify in the setting under
LE----WM---Activities-----Define print control
After MIGO are you transferring the stock to SU managed storage type , as per STANDARD SAP stock goes to 902 which is Non SU managed so here you need to tell us the flow and the storage type where stock goes after MIGO also is that storage type is SU managed or not

Reprint Storage Unit Label

How can I reprint a storage unit label (without having to create a new TO)? Assume that the label is damaged and I have to print a new one and replace the damaged one.
Thanks.

LT32 prints SU label according to open transfer orders that contain the SU. This is not what I need. I need to reprint the label for an existing SU without having to use a TO. The material is not moved at all.

How to print pallet labels in abap

Can anyody tell me the code for printing a pallet label details from abap editor based on a handling unit and sequence count number??
Thank you

Hi,
I have no idea about Pallet Labels? What do you mean by Pallet label?
Basically Labels are creating using
Main window
-->Loop node with corresponding Internal table
>Template with required structure of Label
Otherwise
Loop in Print program
-->Call Function "Smart form Generated function module
xxxxxx "In this smart form create one secondary window -->Create Template and design the Label structure
xxxxxx
endllop.

Pallet Label print after TO of Goods receipt of process Order

Hello,
After the GR of Process Order I need to prin tthe Pallet label through Transfer Order.
Example .. CH-6200 ( SKU Product ) is produce 60 kg.. after process Order..
The output of the process order is nothing but the 6 can each of 10 kg.
Now My pallet limitation is 2 can per pallet which I have maintained in the Material master ( Warehouse Management View 2: 2 can per pallet)
Not I want to prin the the pallet label i.e. during TO ....number of label is going to print are 3.. ( 2 can per pallet) .
Can anyone suggest me is there nany standard form for Pallet Label print in WM.
Thanks
Vaibhva BAnsod

Hi again,
I have been trying to do the reversal with CORR but Iu2019m getting the error message u201CMixed confirmation types (time ticket/time event) are not allowedu201D, message number RU179.
Anyone who can help me on the way?
/WM consultant on unknown territory

Mixing materials with different Goods Receipt date in the same Storage Unit

Hello everybody,
I´d like to know how FIFO strategy would affect to this example:
Adding boxes from one storage unit (pallet) to another storage unit (pallet). Both storage units have different goods receipt dates, so there is a pallet which has boxes with different GR dates.
Would FIFO make difference among boxes inside the storage unit?. As far as I know, when adding stock (boxes) to a handling unit (pallet), the system keeps the oldest GR date and does not create new quant number for the incoming boxes
Thanks in advance for your help

Hi Nagesh,
Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
Regards,
Samuel

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Pallet Label printing through delivery note

Hi All!
As a user of SAP,how will he print pallet labels.I know that when the user browses through VL02N and gives the delivery note and identifies the handling unit of the pallet he wants to print and from there to outout screen and print.
My query is per HU there is one label to be printed whether it may be pallet or box.Can the user make multiple selections to make a print.I mean if the user wants to print 10 box labels at a time how he is going to do that.
Please explain me the procedure to do that.
Regards
Pavan

Pavan,
Try transaction VL71. You can print multiple delivery related output from this transaction.
Brian

WM Replenishment and 2-step picking with storage units.

Dear Colleagues,
I am attempting to use SAP standard fixed bin replenishment and implement it as a 2-step picking process. Generally, the process goes as follows:
- Generate replenishment pick tasks
- Place the picked products onto storage units in an intermediate storage type
- Put the products away from storage units into the respective fixed bins
I have setup the necessary parameters to get standard replenishment to work. I can run LP21 and generate all TR's, and subsequently TO's. The product moves from respective reserve bins into the fixed bins based on strategies that I have setup.
The issue i am experiencing is when I try to introduce the intermediate storage type to place the product into, before it goes into the fixed bins. Additionally, the intermediate storage type needs to have SUM enabled, so that the product gets placed onto pallets. This way, the warehouse personnel will be able to track the physical product movements before it is put away.
Any help in this matter would be greatly appreciated.
Best Regards,
HK
Edited by: Husein Kadribegic on Aug 4, 2009 6:49 PM

Hi,
I'm not sure your scenario is viable in (standard) SAP.
As I understand (e.g.):
- source storage type: productA 10 pc, productB 20 pcs, productC 30 pc
- intermediate storage type: SU1 (productA 2 pc, productB 17 pcs, productC 10 pc), SU2 (productA 8 pc, productB 3 pcs, productC 20 pc)
- destination storage type: bin1: productA 2 pc, productB 17 pcs, productC 10 pc, bin2: productA 8 pc, productB 3 pcs, productC 20 pc
Please notice that SAP determines the to be removed quantities (~corresponding to SU1 & SU2 but not as SUs) when you remove the goods from the intermediate storage type ("allocation") and not when you place the goods into it.
Please also notice that automatically you cannot create storage units (palletize) with different products on it (I'm not sure this is requirement in your case or not).
Please check this link where it is explained where to carry out customizing for 2-step picking and how it works:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f842674afa11d182b90000e829fbfe/frameset.htm
Regards,
Csaba
Edited by: Csaba Szommer on Aug 6, 2009 7:01 AM

Accessing Node Labels - TreeControl with CheckBoxes

Hello,
I have a Tree component that is loaded with CheckBoxes. Each node has a label associated with it, and I need to be able to collect the labels and display them on the right of the component - probably using a Label or Text control.
I can't seem to figure out how to access the names of the items that are checked. I'm including a complete, and simplified, mxml file. If anyone would like to take a look at it, I would appreciate it.
Thanks.
OH - And I am using the Tree CheckBox component from this site: http://www.sephiroth.it/file_detail.php?id=151
Sorry, but the forum will not allow me to upload the files directly.
You will probably need to add those classes to see the Tree CheckBox.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:controls1="it.sephiroth.controls.*">
    <mx:Script>
        <![CDATA[
            import mx.events.DataGridEvent;
            import mx.controls.dataGridClasses.DataGridColumn;
            import mx.effects.easing.Bounce;
            import mx.effects.easing.Elastic;
            import components.MyPanel;
            import mx.effects.easing.Bounce;
            import mx.effects.easing.Elastic;
            import mx.events.MenuEvent;
            import mx.controls.Alert;
            import mx.controls.Menu;
            import mx.events.CloseEvent;
            import mx.controls.*;
            import mx.events.ListEvent;
            import mx.events.TreeEvent;
            import it.sephiroth.renderers.TreecheckboxItemRenderer;
            //******************************* TREE CONTROL CHECKBOX ******************************************
             * Called on checkbox click
             * check and update for both parents and child nodes
             * according to the checkbox status
            private function onItemCheck( event: TreeEvent ): void
                updateParents( event.item as XML, ( event.itemRenderer as TreecheckboxItemRenderer ).checkBox.checkState );
                updateChilds( event.item as XML, ( event.itemRenderer as TreecheckboxItemRenderer ).checkBox.checkState );
             * @see it.sephiroth.controls.CheckBoxExtended#checkState
            private function updateChilds( item:XML, value: uint ):void
                var middle: Boolean = ( value & 2 << 1 ) == ( 2 << 1 );
                var selected: Boolean = ( value & 1 << 1 ) == ( 1 << 1 );
                if( item.children( ).length( ) > 0 && !middle )
                    for each(var x: XML in item.node )
                        x.@checked = value == ( 1 << 1 | 2 << 1 ) ? "2" : value == ( 1 << 1 ) ? "1" : "0";
                        updateChilds( x, value );
            private function updateParents( item: XML, value: uint ): void
                var checkValue: String = ( value == ( 1 << 1 | 2 << 1 ) ? "2" : value == ( 1 << 1 ) ? "1" : "0" );
                var parentNode: XML = item.parent( );
                if( parentNode )
                    for each(var x: XML in parentNode.node )
                        if( x.@checked != checkValue )
                            checkValue = "2"
                    parentNode.@checked = checkValue;
                    updateParents( parentNode, value );
        ]]>
    </mx:Script>
    
    
        <mx:XML xmlns="" id="treeSource">
            <node label="home" checked="">
                <node label="First Responder" checked="">
                    <node label="1RSP First Responder - Medical" checked=""/>
                </node>
                <node label="Battalion Aid Station/Sick Call" checked="">
                    <node label="Battalion Aid Station" checked=""/>
                    <node label="BAS - NBC" checked=""/>
                    <node label="Evac" checked=""/>
                </node>
                <node label="Forward Resuscitative Surgery (FRSS)" checked="">
                    <node label="Pre-Op" checked=""/>
                    <node label="Operating Room" checked=""/>
                    <node label="Post-Op" checked=""/>
                    <node label="Evac" checked=""/>
                </node>
                <node label="Surgical Company" checked="">
                    <node label="Triage/SST" checked=""/>
                    <node label="Triage Evac" checked=""/>
                    <node label="Operating Room" checked=""/>
                    <node label="OR Evac" checked=""/>
                    <node label="OR Evac" checked=""/>
                    <node label="Ward" checked=""/>
                    <node label="X-Ray" checked=""/>
                    <node label="Laboratory" checked=""/>
                    <node label="Pharmacy" checked=""/>
                    <node label="NBC Unit" checked=""/>
                    <node label="Dental" checked=""/>
                    <node label="PMO/EHO/PMT" checked=""/>
                    <node label="PM Entomology" checked=""/>
                    <node label="Occupational and Environmental Healty Sur" checked=""/>
                </node>
            </node>
        </mx:XML>
        <controls1:TreeCheckBox id="mytree"
            showRoot="false"
            width="345"
            height="100%"
            dataProvider="{treeSource}"
            openItems="{treeSource..node}"
            labelField="@label"
            checkField="@checked"
            itemCheck="onItemCheck( event )"
        />
        <mx:Label x="455" y="48" text="Label" fontSize="16" color="#FFFFFF" id="tree_label1"/>
</mx:Application>

Natasha,
Thanks for your reply.
I attempted the code:
public function get labelText():String
if (this.label != null)
return this.label.text
else
return "";
return "";
But when I try to access the code in the application I get the error "Call to possibley undefined method labelText."
I'm not sure I understand exactly how to implement this change within the application itself. Could you explain? Thanks.

Storage unit labels along with pallet labels in wm

Similar Messages

Maybe you are looking for