Storage validation error 0x80070022

I get this error during the Storage > List Potential Cluster Disks test:
Failed to find or allocate arbitration sectors for physical disk {263c99e5-545c-42a6-b540-a3835cda60c8} from node XX.XX.com...Please ensure that all GPT disks have a Microsoft Reserved Partition (MSR) present. Error: 0x80070022.
I know how to fix this due to this forum post: http://tinyurl.com/mvkkuxv
While in diskpart, the disk that is returning the above error, has 0 free space, so I am unable to create the MSR partition. (The partition is empty so I don't know why diskpart thinks it has 0 free space.) How do I resolve this so that my cluster can pass
all of the validation tests?

Hi hova lugozi,
Base on my experience, this issue typically caused by one of your node was holding the disks and was preventing validation from succeeding, please disconnect the nodes storage
then reinitialize the shared storage.
More information:
Configure and Manage the Quorum in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612870.aspx#BKMK_dynamic
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • B2B-51507- Payload validation error - 11.1.1.7 Latest Version

    Anuj/Nitesh (B2B Gurus)
    I am facing a problem when Posting the message from SOA to B2b (XML->EDI) using the B2b Adapter.
    Flow is : Ebusiness->PLSQL->AQ->BPEL->B2B.  Once the message is posted to B2b It is throwing the following Error.
    But I am passing all the mandatory and Optional Parameters.
    Tried the Following Threads, But No luck. I am passing all the Mandatory Parameters.
    How to map Internal-Properties in XSLT.
    Oracle B2B Payload Validation exception
    Scenario - 1 (Success No Errors , Output Does not Contain PO Details)
    Disabled the Validate flag in the Partner Agreement for the B2B Document.
    Verified the B2b Wired Message, Output got generated but without the PO information I am passing from BPEL.
    Scenario - 2 (Error )
    Enabled the Validate flag in the Partner Agreement for the B2B Document. The system is generating an error and throwing list of errors.
    Error
    Id
    C064016C14103689486000005559CD14
    Message Id
    C064016C14103688C7F000005559CD0F
    Refer To Message
    Refer To Message
    Sender Type
    Name
    Sender Value
    ABC
    Receiver Type
    Name
    Receiver Value
    TEST123
    Sender
    ABC
    Receiver
    TEST123
    Agreement Id
    EDI_850_tpa_Lt7763342564515893374
    Agreement
    XXX_EDI_X12_4010_850_Outbound
    Document Type
    850
    Document Protocol
    EDI_X12
    Document Version
    4010
    Message Type
    REQ
    Direction
    OUTBOUND
    State
    MSG_ERROR
    Acknowledgement Mode
    NONE
    Response Mode
    NONE
    Send Time Stamp
    9/9/2013 10:48
    Receive Time Stamp
    9/9/2013 10:48
    Document Retry Interval(Channel)
    0
    Document Remaining Retry(Channel)
    0
    Document Retry Interval(Agreement)
    0
    Document Remaining Retry(Agreement)
    0
    Native Message Size
    Translated Message Size
    5471
    Business Action Name
    Business Transaction Name
    Xpath Name1
    XPathName1
    Xpath Value1
    Xpath Expression1
    Xpath Name2
    XPathName2
    Xpath Value2
    Xpath Expression2
    Xpath Name3
    XPathName3
    Xpath Value3
    Xpath Expression3
    Correlation From XPath Name
    CorrelationFromXPathName
    Correlation From XPath Value
    Correlation From XPath Expression
    Correlation To XPath Name
    CorrelationToXPathName
    Correlation To XPath Value
    Correlation To XPath Expression
    Wire Message
    Wire Message
    Application Message
    Application Message
    Payload Storage
    Payload Storage
    Attachment
    Attachment
    Label
    soa_b2b_ - Thu Sep 05 11:51:44 CDT 2013 - 4
    Collaboration Id
    C064016C14103688E1A000005559CD13
    Collaboration Name
    Collaboration Version
    Business Action Name
    Exchange Protocol Name
    Generic File
    Exchange Protocol Version
    1
    Interchange Control Number
    Group Control Number
    Transaction Set Control Number
    Error Code
    B2B-51507
    Error Description
    Description: Payload validation error.
    Error Level
    ERROR_LEVEL_COLLABORATION
    Error Severity
    ERROR
    Error Text
    Error Brief : Error reporting limit exceeded. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. A functional group code mismatch was encountered. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. A transaction ID mismatch was encountered. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. An X12 syntax error occurred. An X12 syntax error occurred. An X12 syntax error occurred. An X12 syntax error occurred. An X12 syntax error occurred. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. An X12 syntax error occurred. An X12 syntax error occurred. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. An X12 syntax error occurred. An X12 syntax error occurred. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered.
    Error Brief :^M
    Error reporting limit exceeded.^M
    Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
      Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
      Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
      Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
    A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
      A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
      A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
      A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
      A data element with 'Mandatory' status is missing.^M
    A data element with 'Mandatory' status is missing.^M
    Validator error - Extra data was encountered.^M
    Validator error - Extra data was encountered.^M
      Validator error - Extra data was encountered.^M
    Description: Payload validation error., null, null, null, null, C064016C140EF31BFCA000005559CC
    A4, null, null, 1258, B2B-51507, null, null, null, null, null, 2013-09-05 12:35:49.092, null, ^M
      Error :^M
    Analysis halted after 101 error(s) (Limit for Transaction is 100). Large numbers of errors usually indicate that the same error is repeatedly encountered in multiple segments or transactions. Fix the repeating error and resubmit the test to obtain further results.^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 1{br}{tab}Characters: 210 through 212^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 2{br}{tab}Characters: 247 through 257^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 3{br}{tab}Characters: 292 through 294^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 4{br}{tab}Characters: 329 through 339^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 5{br}{tab}Characters: 374 through 376^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 6{br}{tab}Characters: 411 through 426^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 7{br}{tab}Characters: 463 through 465^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 8{br}{tab}Characters: 502 through 517^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 9{br}{tab}Characters: 552 through 558^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 10{br}{tab}Characters: 593 through 597^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 11{br}{tab}Characters: 632 through 633^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 12{br}{tab}Characters: 668 through 673^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 13{br}{tab}Characters: 708 through 717^M
      Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 14{br}{tab}Characters: 752 through 753^M
    Thanks
    Rao.

    Issue is resolved by doing the Following Steps.
    1. Open the ECS file in the Document Editor, Exclude the ISA, GS segments in the ECS file. Save the File and Upload the Document and Redeploy the Agreement.
    2. Export the XSD and refer it in the BPEL process and do the transformation.
    Thanks
    Nethi.

  • Payload validation Error - Outbound flow

    Hi,
    I am trying to create an outbound flow to send a X12,4010,810 document to a trading partner.
    Got the error - Payload Validation error.
    Payload is as below
    <?xml version = '1.0' encoding = 'UTF-8'?><Transaction-810 xmlns="http://www.edifecs.com/xdata/200" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="X12" Version="V4010" CreatedDate="2007-04-10T17:16:24" CreatedBy="ECXEngine_837" GUID="{12345678-1234-1234-1234-123456789012}"><Internal-Properties><Data-Structure Name="Interchange"><Lookup Name="InterchangeControlVersion">00401</Lookup><Lookup Name="InterchangeReceiverID">MarketInc</Lookup><Lookup Name="InterchangeReceiverQual">ZZ</Lookup><Lookup Name="InterchangeSenderID">OracleServices</Lookup><Lookup Name="InterchangeSenderQual">ZZ</Lookup><Lookup Name="InterchangeUsageIndicator">I</Lookup><Lookup Name="Standard">X12</Lookup><Property Name="ElementDelimiter">0x7e</Property><Property Name="InterchangeAckRequested">0</Property><Property Name="InterchangeAuthorizationInfo">Authorizat</Property><Property Name="InterchangeAuthorizationInfoQual">00</Property><Property Name="InterchangeChildCount">1</Property><Property Name="InterchangeComponentElementSep">0x5c</Property><Property Name="InterchangeControlNumber">000000001</Property><Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property><Property Name="InterchangeControlVersion">00401</Property><Property Name="InterchangeDate">140313</Property><Property Name="InterchangeReceiverID">MarketInc</Property><Property Name="InterchangeReceiverQual">ZZ</Property><Property Name="InterchangeSecurityInfo">Security I</Property><Property Name="InterchangeSecurityInfoQual">00</Property><Property Name="InterchangeSenderID">OracleServices</Property><Property Name="InterchangeSenderQual">ZZ</Property><Property Name="InterchangeTime">1727</Property><Property Name="InterchangeTrailerControlNumber">000000001</Property><Property Name="InterchangeUsageIndicator">I</Property><Property Name="SegmentDelimiter">0x0d0x0a</Property><Property Name="Standard">X12</Property><Property Name="SubelementDelimiter">0x5c</Property></Data-Structure></Internal-Properties><Segment-ST><Element-143>IN</Element-143><Element-329>0001</Element-329></Segment-ST><Segment-BIG><Element-373>20140313</Element-373><Element-76>I</Element-76></Segment-BIG><Segment-TDS><Element-610>2</Element-610></Segment-TDS><Segment-SE><Element-96>4</Element-96><Element-329>0001</Element-329></Segment-SE></Transaction-810>
    Can someone suggest what is the problem with this payload.

    More detail --
    Below is the message that is displayed in Oracle B2B Reports -> Business Message
    Id
    7F000001144BE0AB3A100000231A6860
    Message Id
    11d1def534ea1be0:-7e1384fb:144bd539c55:-8000-0000000000007dfc
    Refer To Message
    Refer To Message
    Sender Type
    Name
    Sender Value
    OracleServices
    Receiver Type
    Name
    Receiver Value
    MarketInc
    Sender
    OracleServices
    Receiver
    MarketInc
    Agreement Id
    OS_MI_X12_4010_810_OutboundInvoiceAgr
    Agreement
    OS_MI_X12_4010_810_OutboundInvoiceAgr
    Document Type
    IN
    Document Protocol
    EDI_X12
    Document Version
    4010
    Message Type
    REQ
    Direction
    OUTBOUND
    State
    MSG_ERROR
    Acknowledgement Mode
    NONE
    Response Mode
    NONE
    Send Time Stamp
    Mar 13, 2014 7:42 PM
    Receive Time Stamp
    Mar 13, 2014 7:42 PM
    Document Retry Interval(Channel)
    0
    Document Remaining Retry(Channel)
    0
    Document Retry Interval(Agreement)
    0
    Document Remaining Retry(Agreement)
    0
    Native Message Size
    Translated Message Size
    2344
    Business Action Name
    Business Transaction Name
    Xpath Name1
    XPathName1
    Xpath Value1
    Xpath Expression1
    Xpath Name2
    XPathName2
    Xpath Value2
    Xpath Expression2
    Xpath Name3
    XPathName3
    Xpath Value3
    Xpath Expression3
    Correlation From XPath Name
    CorrelationFromXPathName
    Correlation From XPath Value
    Correlation From XPath Expression
    Correlation To XPath Name
    CorrelationToXPathName
    Correlation To XPath Value
    Correlation To XPath Expression
    Wire Message
    Wire Message
    Application Message
    Application Message
    Payload Storage
    Payload Storage
    Attachment
    Attachment
    Label
    soa_b2b_ - Thu Mar 17 08:30:33 CDT 2014 - 8
    Collaboration Id
    7F000001144BE0AB37E00000231A6850
    Collaboration Name
    Collaboration Version
    Business Action Name
    Exchange Protocol Name
    Generic File
    Exchange Protocol Version
    1.0
    Interchange Control Number
    Group Control Number
    Transaction Set Control Number
    Error Code
    B2B-51507
    Error Description
    Machine Info: (XXXX) Description: Payload validation error.
    Error Level
    ERROR_LEVEL_COLLABORATION
    Error Severity
    ERROR
    Error Text
    Error Brief : XEngine error.
    Application Message :
    Id7F000001144BE0AB22400000231A6820Sender Id TypeSender ValueOracleServicesReceiver Id TypeReceiver ValueMarketIncDocument TypeINDocument Definition810_DefDocument Protocol NameEDI_X12Document Protocol Version4010Refer To Application Message IdRefer To Application Message IdApp Conversation IdApp Message property{fabric.enterpriseId=-1, b2b.documentProtocolVersion=4010, b2b.documentDefinitionName=810_Def, b2b.messageId=11d1def534ea1be0:-7e1384fb:144bd539c55:-8000-0000000000007dfc, MESH_METRICS=null, b2b.messageType=1, tracking.parentReferenceId=mediator:954F1AF0AB1111E3BF8A5F99BC4D6B4E:954F6910AB1111E3BF8A5F99BC4D6B4E:oneway, tracking.compositeInstanceId=20012, tracking.ecid=11d1def534ea1be0:-7e1384fb:144bd539c55:-8000-0000000000007dfc, b2b.toTradingPartnerId=MarketInc, b2b.fromTradingPartnerId=OracleServices, tracking.compositeInstanceCreatedTime=Thu Mar 13 19:42:55 CDT 2014, tracking.conversationId=snbwNIP3idSWrxOB_9mfQZizjgj_IKJyb-EozcpIyP4., tracking.parentComponentInstanceId=mediator:954F1AF0AB1111E3BF8A5F99BC4D6B4E, b2b.documentTypeName=IN}DirectionOUTBOUNDStateMSG_COMPLETEError CodeError TextError DescriptionCreatedMar 13, 2014 7:42 PMModifiedMar 13, 2014 7:42 PMMessage Size2344PayloadPayloadBusiness MessageBusiness MessageRetry Interval0Reattempt CountRemaining Retry0ECID11d1def534ea1be0:-7e1384fb:144bd539c55:-8000-0000000000007dfcComposite Instance Id20012Parent Composite Instance Idmediator:954F1AF0AB1111E3BF8A5F99BC4D6B4EConversation IdsnbwNIP3idSWrxOB_9mfQZizjgj_IKJyb-EozcpIyP4.Domain NamedefaultComposite NameOSToMIOutboundInvoiceProjectComposite Version1.0Reference NameB2BOSToMarketIncOutboundUrl
    Payload Storage :
    <?xml version = '1.0' encoding = 'UTF-8'?><Transaction-810 xmlns="http://www.edifecs.com/xdata/200" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="X12" Version="V4010" CreatedDate="2007-04-10T17:16:24" CreatedBy="ECXEngine_837" GUID="{12345678-1234-1234-1234-123456789012}"><Internal-Properties><Data-Structure Name="Interchange"><Lookup Name="InterchangeControlVersion">00401</Lookup><Lookup Name="InterchangeReceiverID">MarketInc</Lookup><Lookup Name="InterchangeReceiverQual">ZZ</Lookup><Lookup Name="InterchangeSenderID">OracleServices</Lookup><Lookup Name="InterchangeSenderQual">ZZ</Lookup><Lookup Name="InterchangeUsageIndicator">I</Lookup><Lookup Name="Standard">X12</Lookup><Property Name="ElementDelimiter">0x7e</Property><Property Name="InterchangeAckRequested">0</Property><Property Name="InterchangeAuthorizationInfo">Authorizat</Property><Property Name="InterchangeAuthorizationInfoQual">00</Property><Property Name="InterchangeChildCount">1</Property><Property Name="InterchangeComponentElementSep">0x5c</Property><Property Name="InterchangeControlNumber">000000001</Property><Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property><Property Name="InterchangeControlVersion">00401</Property><Property Name="InterchangeDate">140313</Property><Property Name="InterchangeReceiverID">MarketInc</Property><Property Name="InterchangeReceiverQual">ZZ</Property><Property Name="InterchangeSecurityInfo">Security I</Property><Property Name="InterchangeSecurityInfoQual">00</Property><Property Name="InterchangeSenderID">OracleServices</Property><Property Name="InterchangeSenderQual">ZZ</Property><Property Name="InterchangeTime">1727</Property><Property Name="InterchangeTrailerControlNumber">000000001</Property><Property Name="InterchangeUsageIndicator">I</Property><Property Name="SegmentDelimiter">0x0d0x0a</Property><Property Name="Standard">X12</Property><Property Name="SubelementDelimiter">0x5c</Property></Data-Structure></Internal-Properties><Segment-ST><Element-143>IN</Element-143><Element-329>0001</Element-329></Segment-ST><Segment-BIG><Element-373>20140313</Element-373><Element-76>I</Element-76></Segment-BIG><Segment-TDS><Element-610>2</Element-610></Segment-TDS><Segment-SE><Element-96>4</Element-96><Element-329>0001</Element-329></Segment-SE></Transaction-810>
    I have set the following b2b headers in SOA before sending it to B2B outbound
    Constant: 4010_810_Def Property: b2b.documentDefinitionName 
    Constant: 4010 Property: b2b.documentProtocolVersion
    Constant: OracleServices Property: b2b.fromTradingPartnerId
    Constant: MarketInc Property: b2b.toTradingPartnerId
    Constant: 1 Property: b2b.messageType
    Constant: IN Property: b2b.documentTypeName ( I defined my docuemnt with name 'IN')
    Property: tracking.ecid Property: b2b.messageId

  • Getting Validation Error at B2B Console for 856 Outbound B2B-51507

    Hi,
    We are getting this error while sending the EDI 856 in an outgoing Process. We are getting the data from Oracle Apps and sending it to B2B via B2b adapter using mediator.
    we are using X856 ecx file and X856 xsd.
    Can Anyone help in this. If Anyone is having any idea please help us on this.
    Do we need to set the Deployment Validation Property to False? If yes then is it in EM we need to Set?
    Appreciate quick response.
    Below is the error details:
    Id 0AF6038D12BE3AE21CF0000011881680
    Message Id 0AF6038D12BE3AE1C5E0000011881630
    Refer To Message Refer To Message
    Sender Type Specialties
    Receiver Type Name
    Receiver Value XXXX_4010
    Sender Sybron Dental Specialties
    Receiver :XXXX_4010
    Agreement Id:XXXXXXX
    Agreement HEN_KRR_AGR
    Document Type 856
    Document Protocol EDI_X12
    Document Version 4010
    Message Type REQ
    Direction OUTBOUND
    State MSG_ERROR
    Acknowledgement Mode NONE
    Response Mode NONE
    Send Time Stamp Monday, October 25, 2010 6:57:41 AM GMT-07:00
    Receive Time Stamp Monday, October 25, 2010 6:57:41 AM GMT-07:00
    Document Retry Interval 0
    Document Remaining Retry 0
    Native Message Size
    Translated Message Size 3811
    Business Action Name
    Business Transaction Name
    Xpath Name1 XPathName1
    Xpath Value1
    Xpath Expression1
    Xpath Name2 XPathName2
    Xpath Value2
    Xpath Expression2
    Xpath Name3 XPathName3
    Xpath Value3
    Xpath Expression3
    Correlation From XPath Name CorrelationFromXPathName
    Correlation From XPath Value
    Correlation From XPath Expression
    Correlation To XPath Name CorrelationToXPathName
    Correlation To XPath Value
    Correlation To XPath Expression
    Wire Message Wire Message
    Application Message Application Message
    Payload Storage Payload Storage
    Attachment Attachment
    Label soa_b2b_ - Fri Oct 22 04:32:37 PDT 2010
    Collaboration Id 0AF6038D12BE3AE205B0000011881670
    Collabration Name
    Collabration Version
    Business Action Name
    Exchange Protocol Name Generic File
    Exchange Protocol Version 1.0
    Interchange Control Number
    Group Control Number
    Transaction Set Control Number
    Error Code B2B-51507
    Error Description Machine Info: (org-vmsosoa.sds.sybrondental.com) Description: Payload validation error.
    Error Level ERROR_LEVEL_COLLABORATION
    Error Severity ERROR
    Error Text Error Brief : XEngine error.
    This is the Application Message we are getting in Error Details:
    Document Type 856
    Document Definition 856_DocDefHENK
    Document Protocol Name EDI_X12
    Document Protocol Version 4010
    Refer To Application Message Id Refer To Application Message Id
    App Conversation Id
    App Message property {tracking.compositeInstanceId=11, b2b.documentProtocolVersion=4010, b2b.toTradingPartnerId=HEN_KRR_4010, tracking.ecid=0000IjZLVsfDCgS5IFc9yf1ChDOY0034Rz, b2b.fromTradingPartnerId=Sybron Dental Specialties, tracking.conversationId=BPEL, tracking.compositeInstanceCreatedTime=Mon Oct 25 06:57:39 PDT 2010, tracking.parentComponentInstanceId=mediator:D4A7EA60E03F11DFBFC66D8172AE9492, MESH_METRICS=null, b2b.documentTypeName=856, tracking.parentReferenceId=mediator:D4A7EA60E03F11DFBFC66D8172AE9492:D4AC5730E03F11DFBFC66D8172AE9492:oneway}
    Direction OUTBOUND
    State MSG_ERROR
    Error Code B2B-51507
    Error Text Error Brief : XEngine error.
    Error Description Error : Mandatory attribute missing: Standard.
    Created Date Monday, October 25, 2010 6:57:40 AM GMT-07:00
    Modified Date Monday, October 25, 2010 6:57:41 AM GMT-07:00
    Message Size 3811
    Payload Payload
    Business Message Business Message
    Retry Interval 0
    Reattempt Count 0
    Remaining Retry 0
    ECID 0000IjZLVsfDCgS5IFc9yf1ChDOY0034Rz
    Composite Instance Id 11
    Parent Composite Instance Id mediator:D4A7EA60E03F11DFBFC66D8172AE9492
    Conversation Id BPEL
    Domain Name default
    Composite Name Generate856ASNOutbound
    Composite Version 2.0
    Reference Name B2B_GetData

    Hi,
    It looks like , Payload is not valid as per the ecs/xsd so B2B is giving Payload validation Error.
    If Validation is must then validate the payload against ecs/xsd offline and correct.
    or you can turn off validation in Agreement (Validation = false) and redeploy the agreement.
    Rgds,
    Nitesh Jain

  • JSF select one menu keeps giving me summary=Validation Error: Value is not

    Hi all,
    I'm using five select menus in a JSP file.
    the other four are populated whenever the first menu changes its value (ValueChange event).
    after the menus are populated, i select a item in each menu and submit it.
    but when i submit the form i get the following error:
    E com.sun.faces.context.FacesContextImpl addMessage Adding Message[sourceId=form2:menu61,summary=Validation Error: Value is not valid)
    [12/1/06 11:25:58:541 EST] 00000030 jsf           E com.sun.faces.context.FacesContextImpl addMessage Adding Message[sourceId=form2:menu5,summary=Validation Error: Value is not valid)
    [12/1/06 11:25:58:557 EST] 00000030 jsf           E com.sun.faces.context.FacesContextImpl addMessage Adding Message[sourceId=form2:menu6,summary=Validation Error: Value is not valid)where menu61, menu5, menu6 are the menus on the form.
    someone pls throw some light on this.
    -Seshu

    Hi,
    Since you are using a request scoped bean things work like this:
    1. You fetch your list, for example from a database, with a bean that is put in request scope.
    2. You populate your select component on the jsp page.
    3. You select an item in the select component and submits the form.
    4. When the form is submitted the selected value has to be validated against the list it was chosen from. Since you retrieved the list from a bean in request scope the list isn't available when you submit the form and the getter for the list probably returns an empty list which gives you the validation error.
    What you have to do is to get the list the item was selected from when submitting the form. This can be done in different ways. Either you keep your list in the session between the requests or you get the list from your data storage again. This is a horrible "feature" with JSF and from what I know it's impossible to turn this validation off.
    /klejs

  • Internal Delievery channel AIP-51505:  General Validation Error

    hi ,
    I am trying HL7 sample provided with B2b installation. It works fine . Have modified internal delievery channel as file protocol & provided the folder uri , so as to b2b engine picks it up as xml message is dropped in folder. It is resulting in B2B - (ERROR) Error -: AIP-51505: General Validation Error .
    Just wondering why the B2B process is not validating xml file by just modifing internal delievery channel. Do i have to take additional care to configure Internal Delievery channel. ??
    2008.12.04 at 12:05:49:734: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
         at oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin.decodeIncomingMessage(GenericExchangePlugin.java:195)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1364)
         at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)
         at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)
         at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
         at java.lang.Thread.run(Thread.java:534)
    2008.12.04 at 12:05:49:734: Thread-14: B2B - (ERROR) Error -: AIP-51505:  General Validation Error
         at oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin.decodeIncomingMessage(GenericExchangePlugin.java:195)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1364)
         at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)
         at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)
         at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
         at java.lang.Thread.run(Thread.java:534)
    2008.12.04 at 12:05:49:734: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
    2008.12.04 at 12:05:49:734: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
    2008.12.04 at 12:05:49:734: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-51505: General Validation Error
    2008.12.04 at 12:05:49:734: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
    2008.12.04 at 12:05:49:750: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {filename=a01.xml, filesize=1901, file_ext=xml, *fullpath=C:\files\a01.xml, timestamp=2008-12-04T11:43:31.640-05:00}*
    2008.12.04 at 12:05:49:750: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
    2008.12.04 at 12:05:49:750: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
    2008.12.04 at 12:05:49:750: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-51505: General Validation Error
    2008.12.04 at 12:05:49:750: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
    2008.12.04 at 12:05:49:750: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
    2008.12.04 at 12:05:49:750: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
    2008.12.04 at 12:05:49:750: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum not null
    2008.12.04 at 12:05:49:750: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
    2008.12.04 at 12:05:49:781: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
    2008.12.04 at 12:05:49:812: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
    2008.12.04 at 12:05:49:812: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
    2008.12.04 at 12:05:49:812: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exception null
    2008.12.04 at 12:05:49:812: Thread-14: B2B - (ERROR) java.lang.NullPointerException
         at oracle.tip.adapter.b2b.msgproc.DbAccess.insertMsgTblRow(DbAccess.java:839)
         at oracle.tip.adapter.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:5150)
         at oracle.tip.adapter.b2b.engine.Engine.handleInboundException(Engine.java:3831)
         at oracle.tip.adapter.b2b.engine.Engine.handleExceptionBeforeIncomingTPA(Engine.java:3702)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1383)
         at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)
         at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)
         at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
         at java.lang.Thread.run(Thread.java:534)
    Thanks

    Hi Ramesh,
    Thank you for your reply. Basically i need to convert HL7 xml to HL7 binary with delivery channel as file. Changed the
    oracle.tip.adapter.b2b.allTPInOneDirectory= True from false.
    Created Internal Delievery channel with folder as c:\USLabs (USLabs is a host trading partner) on localhost.
    i am placing xml file with name as USLabs_123.xml in this particular folder.
    This xml file is same as a01.xml provided with HL7 sample. but i get this exception.
    Protocol = File
    Version = 1.0
    Transport Header
    filename:USLabs_123.xml
    filesize:1888
    file_ext:xml
    fullpath:C:\USLabs\USLabs_123.xml
    timestamp:2008-12-04T12:27:58.546-05:00
    <?xml version="1.0" ?><ADT_A01 xmlns="http://www.edifecs.com/xdata/200 " xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="HL7" Version="2.3.1" CreatedDate="2005-08-16T16:52:26" CreatedBy="ECXEngine_826" GUID="{1A2726C6-B00E-DA11-8F7A-080020C8D296}"><MSH><MSH.1>|</MSH.1><MSH.2>^~\&amp;</MSH.2><MSH.3><HD.1>#Property(MessageSendingApp)#</HD.1></MSH.3><MSH.4><HD.1>#Property(MessageSendingFacility)#</HD.1></MSH.4><MSH.5><HD.1>#Property(MessageReceivingApp)#</HD.1></MSH.5><MSH.6><HD.1>#Property(MessageReceivingFacility)#</HD.1></MSH.6><MSH.7><TS.1>20050804162010</TS.1></MSH.7><MSH.8 xsi:nil="true"></MSH.8><MSH.9><MSG.1>ADT</MSG.1><MSG.2>A01</MSG.2></MSH.9><MSH.10>#ControlNumber#</MSH.10><MSH.11><PT.1>#Property(ProcessingID)#</PT.1></MSH.11><MSH.12><VID.1>2.3.1</VID.1></MSH.12><MSH.13 xsi:nil="true"></MSH.13><MSH.14 xsi:nil="true"></MSH.14><MSH.15>AL</MSH.15><MSH.16>ER</MSH.16><MSH.17>#Property(CountryCode)#</MSH.17><MSH.18>ASCII</MSH.18><MSH.19><CE.1>ENG</CE.1></MSH.19></MSH><PID><PID.1>1</PID.1><PID.2 xsi:nil="true"></PID.2><PID.3><CX.1>A0000010</CX.1></PID.3><PID.4 xsi:nil="true"></PID.4><PID.5><XPN.1><FN.1>Miranda Charles 01_10</FN.1></XPN.1></PID.5><PID.6 xsi:nil="true"></PID.6><PID.7><TS.1>20001001</TS.1></PID.7><PID.8>F</PID.8></PID><PV1><PV1.1>1</PV1.1><PV1.2 xsi:nil="true"></PV1.2><PV1.3 xsi:nil="true"></PV1.3><PV1.4 xsi:nil="true"></PV1.4><PV1.5 xsi:nil="true"></PV1.5><PV1.6 xsi:nil="true"></PV1.6><PV1.7 xsi:nil="true"></PV1.7><PV1.8 xsi:nil="true"></PV1.8><PV1.9 xsi:nil="true"></PV1.9><PV1.10 xsi:nil="true"></PV1.10><PV1.11 xsi:nil="true"></PV1.11><PV1.12 xsi:nil="true"></PV1.12><PV1.13 xsi:nil="true"></PV1.13><PV1.14 xsi:nil="true"></PV1.14><PV1.15 xsi:nil="true"></PV1.15><PV1.16 xsi:nil="true"></PV1.16><PV1.17 xsi:nil="true"></PV1.17><PV1.18 xsi:nil="true"></PV1.18><PV1.19><CX.1>10010</CX.1></PV1.19></PV1></ADT_A01>
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) DBContext beginTransaction: Enter
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) DBContext beginTransaction: Leave
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:syncAckEBMS enter
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:syncAckEBMS checking header names
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:syncAckEBMS name =filename
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:syncAckEBMS name =filesize
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:syncAckEBMS name =file_ext
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:syncAckEBMS name =fullpath
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:syncAckEBMS name =timestamp
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:syncAckEBMS exit
    2008.12.05 at 06:03:28:046: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
    2008.12.05 at 06:03:28:109: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
    2008.12.05 at 06:03:28:109: Thread-17: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:onMessage sendEventtrue
    2008.12.05 at 06:03:28:125: Thread-17: B2B - (DEBUG) DBContext commit: Enter
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) DBContext beginTransaction: Enter
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) DBContext beginTransaction: Leave
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Enter
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processEvents begin transaction
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) DBContext beginTransaction: Enter
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) DBContext beginTransaction: Leave
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Enter
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Enter
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Enter
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Exit
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Enter
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Exit
    2008.12.05 at 06:03:28:125: Thread-16: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) MimePackaging:unpack:Enter
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) MimePackaging:doUnpack:Enter
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = null
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@7f8922
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) MimePackaging:unpack:Exit
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {File}
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = USLabs_123.xml
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage File TP Host name = USLabs
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: USLabs Type: null Value: null
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage fromParty = USLabs
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: USLabs Type: null Value: null
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: null Value: null
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage security info NULL
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Exit
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Enter
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage toTP null
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Exit
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Enter
    2008.12.05 at 06:03:28:171: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check non-RosettaNet Message
    2008.12.05 at 06:03:28:187: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Exit
    2008.12.05 at 06:03:28:187: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : null
    2008.12.05 at 06:03:28:187: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin:identifyIncomingDocument Enter
    2008.12.05 at 06:03:28:187: Thread-16: B2B - (WARNING) checkForEB:Does not end with EB. Appending EB to payload
    2008.12.05 at 06:03:28:234: Thread-17: B2B - (DEBUG) DBContext commit: Transaction.commit()
    2008.12.05 at 06:03:28:234: Thread-17: B2B - (DEBUG) DBContext commit: Leave
    2008.12.05 at 06:03:28:406: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7SelectorImpl:HL7SelectorImpl Enter
    2008.12.05 at 06:03:28:406: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7SelectorImpl:HL7SelectorImpl document params = null
    2008.12.05 at 06:03:28:406: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7SelectorImpl:isValidateEnvelope oracle.tip.adapter.b2b.hl7.ignoreValidation set to ALL
    2008.12.05 at 06:03:28:406: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7SelectorImpl:HL7SelectorImpl validateEnvelope = false
    2008.12.05 at 06:03:28:406: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7SelectorImpl:HL7SelectorImpl Leave
    2008.12.05 at 06:03:28:406: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7SelectorImpl:cloneSelector Enter
    2008.12.05 at 06:03:28:421: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7SelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.hl7.HL7SelectorImpl@1e1ec86
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin:identifyIncomingDocument errcode = Execute failed - CECToolsException thrown - HRESULT[650007], description[The data in the file could not be parsed. Please check the file to verify that it is valid and formatted correctly. This error can occur for one of the following reasons:  A) The data file may be a Word document or have some other binary format. B) The envelope data may not be formatted properly. If this is an X12 data file, please verify that the ISA segment is the correct size (exactly 106 characters). If this is an EDIFACT data file, it must have either a UNA or begin with UNB. For other standards, verify that the envelope segments conform to the specified rules. C) The segment/record delimiters in the file are incorrect.]
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (ERROR) com.edifecs.shared.jni.JNIException: Execute failed - CECToolsException thrown - HRESULT[650007], description[The data in the file could not be parsed. Please check the file to verify that it is valid and formatted correctly. This error can occur for one of the following reasons:  A) The data file may be a Word document or have some other binary format. B) The envelope data may not be formatted properly. If this is an X12 data file, please verify that the ISA segment is the correct size (exactly 106 characters). If this is an EDIFACT data file, it must have either a UNA or begin with UNB. For other standards, verify that the envelope segments conform to the specified rules. C) The segment/record delimiters in the file are incorrect.]
         at com.edifecs.shared.jni.xdata.INativeToXData.ExecuteNative(Native Method)
         at com.edifecs.shared.jni.xdata.INativeToXData.Execute(Unknown Source)
         at oracle.tip.adapter.b2b.document.hl7.HL7DocumentPlugin.identifyIncomingDocument(HL7DocumentPlugin.java:328)
         at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3024)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1552)
         at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)
         at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)
         at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
         at java.lang.Thread.run(Thread.java:534)
    *2008.12.05 at 06:03:31:046: Thread-16: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error*
         at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3043)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1552)
         at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)
         at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)
         at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
         at java.lang.Thread.run(Thread.java:534)
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-50083: Document protocol identification error
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {filename=USLabs_123.xml, filesize=1888, file_ext=xml, fullpath=C:\USLabs\USLabs_123.xml, timestamp=2008-12-04T12:27:58.546-05:00}
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-50083: Document protocol identification error
    2008.12.05 at 06:03:31:046: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
    2008.12.05 at 06:03:31:062: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
    2008.12.05 at 06:03:31:062: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
    2008.12.05 at 06:03:31:062: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum not null
    2008.12.05 at 06:03:31:062: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
    2008.12.05 at 06:03:31:062: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
    2008.12.05 at 06:03:31:062: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
    2008.12.05 at 06:03:31:078: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
    2008.12.05 at 06:03:31:078: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
    2008.12.05 at 06:03:31:078: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name null
    2008.12.05 at 06:03:31:078: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value nullnull
    2008.12.05 at 06:03:31:078: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
    2008.12.05 at 06:03:31:093: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
    2008.12.05 at 06:03:31:093: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
    2008.12.05 at 06:03:31:093: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
    2008.12.05 at 06:03:31:093: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
    2008.12.05 at 06:03:31:093: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = USLabs_123.xml@C0A8006411E06D104AB0000013426420
    2008.12.05 at 06:03:31:109: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
    ** DbAccess:updateNativeEvtTblRow:tip_wireMsg protocolCollabID = null
    2008.12.05 at 06:03:31:109: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
    2008.12.05 at 06:03:31:109: Thread-16: B2B - (DEBUG) Engine:notifyApp Enter
    2008.12.05 at 06:03:31:109: Thread-16: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
    <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <correlationId>null</correlationId>
    <b2bMessageId>C0A8006411E06D1048C0000013426410</b2bMessageId>
    <errorCode>AIP-50083</errorCode>
    <errorText>Document protocol identification error</errorText>
    <errorDescription>
    <![CDATA[Machine Info: (xpone)
    Description: Unable to identify the document protocol of the message
    StackTrace:
    Error -:  AIP-50083:  Document protocol identification error
         at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3043)
         at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1552)
         at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)
         at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)
         at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)
         at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
         at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
         at java.lang.Thread.run(Thread.java:534)
      ]]>
    </errorDescription>
    <errorSeverity>2</errorSeverity>
    </Exception>
    Please help.
    Thanks

  • Dell PowerVault MD3600f - Unable to upgrade firmware - Data validation error

    Upgrade Controller Firmware wizard reports the following error.
    1 problem detected.
    Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
    What does this mean? and how to fix it.

    Hi,
    yes 100% the error is reported from the dell mdsm software.
    steps.
    1. open mdsm application
    2. right click on powervault md3600f
    3. select upgrade raid controller module firmware
    4. upgrade raid controller module screen apears and refreshes unit(s) status changes to no upgradeable.
    5. error apears in the details window.
    6. press view log.
    [May 17, 2013 9:25:15 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests start]
    Pre-upgrade tests started
    [May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
    Test passed - RAID controller module 1
    [May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
    Test passed - RAID controller module 0
    [May 17, 2013 9:25:38 AM] [MD3600] [pre-upgrade tests] [check spm database]
    Test passed - RAID controller module 1
    [May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [check spm database]
    Test passed - RAID controller module 0
    [May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [Physical Disks Unavailable]
    Test passed
    [May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check configuration database]
    Test passed
    [May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check physical disks]
    Test passed
    [May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check disk groups and disk pools]
    Test passed
    [May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check hot spares]
    Test passed
    [May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check current operations]
    Test passed
    [May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check virtual disks]
    Test passed
    [May 17, 2013 9:25:43 AM] [MD3600] [pre-upgrade tests] [check internal data validity]
    Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
    [May 17, 2013 9:25:44 AM] [MD3600] [pre-upgrade tests] [check event log]
    The event log was cleared within the last 24 hours (event type: 100).
    [May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [check event log]
    Test passed
    [May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests complete] [0h 0m 30s]
    Pre-upgrade test(s) failure - the storage array cannot be upgraded in its present state

  • Read-only radio group losing value on validation error

    It took quite a while to track this down, but I think I've got it narrowed down properly. I have an APEX form for updating a record in a databse table with a radio group which is conditionally read-only. If that radio group has a value AND is read-only, when the form is submitted and hits a validation error, the value of the radio group is lost.
    For example, the radio group SUBMITTED_FOR_APPROVAL is set to Y and is read-only for a given user. That user then changes something else on the form and submits it. However, the form now hits a validation error for some field. When the form reloads with the validation error displayed, all the fields are restored except the read-only radio group which is now blank. If a select list is used with the identical read-only condition, it works fine. Likewise, if a radio group is used, but the read-only condition is removed, it works fine. It is only when it is a radio group and it is read-only, that the value does not appear to be submitted to the session with all the form values whent he form is submitted.
    Is this a bug or am I simply missing something?
    Apex 3.1.2
    Rgds/Mark M.

    It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
    1 Display=Yes, Return=Y
    2 Display=No, Return=N
    The settings in the LOV section on the item iteself:
    Named LOV: LOV_YN
    Display Extra values: No Dynamic translation: Not translated
    Number of columns: 2 Display null: No
    Null display value is blank as is null return value
    Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
    Rgds/Mark M.

  • Weblogic app server wsdl web service call with SSL Validation error = 16

    Weblogic app server wsdl web service call with SSL Validation error = 16
    I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
    Cannot complete the certificate chain: No trusted cert found
    Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
    Validation error = 16
    From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
    Here is how I load trustStore and keyStore in my java program:
         System.setProperty("javax.net.ssl.trustStore",”cacerts”);
         System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
         System.setProperty("javax.net.ssl.trustStoreType","JKS");
    System.setProperty("javax.net.ssl.keyStoreType","JKS");
    System.setProperty("javax.net.ssl.keyStore", keyStoreName);
         System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd);      System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
    Here is how I create cacerts using verisign hierarchy certs (in this order)
    1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
    1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
    1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
    Because my program is a weblogic app server, when I start the program, I have java command line options set as:
    -Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
    -Dweblogic.security.SSL.ignoreHostnameVerification=true
    -Dweblogic.security.SSL.enforceConstraints=strong
    That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
    In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
    I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
    1.     Do I create “cacerts” the correct order with right keeltool options?
    2.     Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
    3.     Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
    4.     Do I need to put the “cacerts” to some specific weblogic directory?
    ---------------------------------wsdl file
    <wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
         <wsp:Policy wsu:Id="TokenServices_policy">
              <wsp:ExactlyOne>
                   <wsp:All>
                        <sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
                             <wsp:Policy>
                                  <sp:TransportToken>
                                       <wsp:Policy>
                                            <sp:HttpsToken RequireClientCertificate="true"/>
                                       </wsp:Policy>
                                  </sp:TransportToken>
                                  <sp:AlgorithmSuite>
                                       <wsp:Policy>
                                            <sp:Basic256/>
                                       </wsp:Policy>
                                  </sp:AlgorithmSuite>
                                  <sp:Layout>
                                       <wsp:Policy>
                                            <sp:Strict/>
                                       </wsp:Policy>
                                  </sp:Layout>
                             </wsp:Policy>
                        </sp:TransportBinding>
                        <wsaw:UsingAddressing/>
                   </wsp:All>
              </wsp:ExactlyOne>
         </wsp:Policy>
         <wsdl:types>
              <xsd:schema targetNamespace="http://tempuri.org/Imports">
                   <xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
                   <xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
              </xsd:schema>
         </wsdl:types>
         <wsdl:message name="ITokenServices_GetUserToken_InputMessage">
              <wsdl:part name="parameters" element="tns:GetUserToken"/>
         </wsdl:message>
         <wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
              <wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
         </wsdl:message>
         <wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
              <wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
         </wsdl:message>
         <wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
              <wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
         </wsdl:message>
         <wsdl:portType name="ITokenServices">
              <wsdl:operation name="GetUserToken">
                   <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
                   <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
              </wsdl:operation>
              <wsdl:operation name="GetSSOUserToken">
                   <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
                   <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
              </wsdl:operation>
         </wsdl:portType>
         <wsdl:binding name="TokenServices" type="tns:ITokenServices">
              <wsp:PolicyReference URI="#TokenServices_policy"/>
              <soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
              <wsdl:operation name="GetUserToken">
                   <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
                   <wsdl:input>
                        <soap12:body use="literal"/>
                   </wsdl:input>
                   <wsdl:output>
                        <soap12:body use="literal"/>
                   </wsdl:output>
              </wsdl:operation>
              <wsdl:operation name="GetSSOUserToken">
                   <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
                   <wsdl:input>
                        <soap12:body use="literal"/>
                   </wsdl:input>
                   <wsdl:output>
                        <soap12:body use="literal"/>
                   </wsdl:output>
              </wsdl:operation>
         </wsdl:binding>
         <wsdl:service name="TokenServices">
              <wsdl:port name="TokenServices" binding="tns:TokenServices">
                   <soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
                   <wsa10:EndpointReference>
                        <wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
                   </wsa10:EndpointReference>
              </wsdl:port>
         </wsdl:service>
    </wsdl:definitions>
    ----------------------------------application log
    adding as trusted cert:
    Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
    Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
    Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
    Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
    adding as trusted cert:
    Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
    Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
    adding as trusted cert:
    Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
    Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
    Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
    <Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
    <Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
    <Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
    <Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
    java.lang.Exception: New alert stack
         at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
         at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
         at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
         at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
         at com.certicom.tls.record.WriteHandler.write(Unknown Source)
         at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
         at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
         at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
         at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
         at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
         at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
         at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
         at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
         at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
         at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
         at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
         at javax.xml.ws.Service.<init>(Service.java:56)
         at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
         at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
         at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
         at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
         at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
    <Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
    java.lang.Exception: New alert stack
         at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
         at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
         at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
         at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
         at com.certicom.tls.record.WriteHandler.write(Unknown Source)
         at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
         at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
         at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
         at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
         at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
         at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
         at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
         at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
         at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
         at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
         at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
         at javax.xml.ws.Service.<init>(Service.java:56)
         at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
         at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
         at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
         at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
         at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>

    I received a workaround by an internal message.
    The how to guide is :
    -Download the wsdl file (with bindings, not the one from ESR)
    -Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
    -Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
    -Create a new logicial destination that point to the wsdl file modified
    -Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
    Then the received data is check by the metadata logical destination but the data is retrieved from the correct server.

  • How do you resolve Financial Management service validation error in EPM ?

    Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report?
    Environment:
    Quad-Core AMD Processor 2.2 GHz (Server Machine)
    5 GB RAM
    Server 2003 Standard 32-Bit SP2 (also tried in Enterprise)
    Application Server:
    WebLogic Server 9.2 Custom Installation (with Add-Ins)
    http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
    Database:
    Oracle 10gR2 (Standard Installation per step-by-step guide from Oracle)
    http://www.oracle.com/technology/software/products/database/index.html
    Hyperion EMP System 11.1.1.3:
    Installer
    Foundation Services (4 Files )
    EMP Architect
    Financial Management, Planning, Financial Reporting and Web Analysis (primarily interested in FM)
    http://www.oracle.com/technology/software/products/bi/performance-management/index.html
    The following are the sequences of steps carried out during the Installation and Configuration of EPM:
    1)     Installed the Server along with its respective SP2 – Shutdown the machine
    2)     Assigned IP and DNS addresses
    3)     Installed Window components by ticking Application Server Console, Enable COM+ access, IIS and DNS
    4)     Run “dcpromo” to create a Domain Controller with default values and assigned a domain name – Shutdown the machine
    5)     Installed Weblogic Server 9.2 and configure it using Configuration Wizard – Selected “test environment” and ticked default “listening port” – Shutdown the machine
    6)     Basic installation of Oracle Database 10gR2 using Step-by-Step guide provided by Oracle and carried out Password Management steps. After installation, I then created a user “oracle” and assigned it to ora_dba User Group with the required Local Security Policies – “log on as a batch job” and “Act as part of operating system”
    7)     Logged into database and acknowledge the licensing window – Shutdown the machine
    8)     Restarted the machine and checked all relevant and newly installed Database and WebLogic services are running.
    9)     Started Installing EPM components by double clicking “InstallTool.cmd” and selected all relevant components at ONCE as per Installation Guide – Result: - All selected EPM components were successfully installed without errors or exceptions
    10)     At the end of installation window, I carried out the configuration in the following scearios:
    Scenario 1: Configuration all at Default settings
    Scenario 2: Configuration all, except “Application Server” I selected the WebLogic9.2
    Scenario 3: Configuration all, except “Application Server” and “Workspace Web Server” were being Welogic9.2 and IIS HTTP
    RESULT: After all numerous installations, all came down to ONE ERROR from “Diagnostic Report” stating the following:
    Financial Management:
    FAILED SVR: HFM Service Validation Check if HFM service in working state.
    Error: Error message: <03/11/2010 05:32:26 PM> CreateApplicationCAS... Failed at line: 2
    Recommended Action: Make sure HAT utility is working. 1 s
    I then simply ignored this error and tried to deploy an Application, all worked fine until you get to the point at “Job Console” where you need to press “Refresh” button. Progress remained at 12% until it got timedout after 300 seconds and force attempt of refreshing resulting in “aborted” job with the following error:
    Error Reference Number: {DB3940F5-2D4A-46AB-A370-77F82F121BBA}
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:39:58 PM;Svr: PBAR;File: CHsvDataSourceImpl.cpp;Line: 196;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1276;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1190;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: AgentHelper.cpp;Line: 728;Ver: 11.1.1.3.0.2413;
    Num: 0x8000ffff;Type: 1;DTime: 4/12/2010 4:40:08 PM;Svr: PBAR;File: CHfmAwbAgent.cpp;Line: 744;Ver: 11.1.1.3.0.2413;
    This is, I believe preventing me from deploying Consolidation Apps, including Sample Application provided with EPM Downloads. I have tried installing and configuring by components. All failed with the same outcome.
    I have been working on this effortlessly in different combinations to get at least one Financial Management Application get deployed so I could enhance my learning adventure. As it stands, I am not sure where to get help and completely lost in the World of Oracle. I am also come to wonder whether “Free Downloads of EPM” are indeed, is “complete and is in working-state” or do I need a licence to use for personal learning experience? Are there different downloads for different needs or/users For example, eDelivery downloads are different from OTN Agreement downloads?
    I have downloaded the files from following URL:
    http://www.oracle.com/technology/software/products/bi/performance-management/index.html
    I am completely lost and all services are up and running and not sure what I am missing!! Any assistance will be greatly appreciated.
    Many Thanks
    BT
    Edited by: user8973921 on 13-Apr-2010 05:08
    Edited by: user8973921 on 13-Apr-2010 10:56
    Edited by: user8973921 on 14-Apr-2010 02:30

    I am having exactly the same problem using Windows 2003 Standard editions SP2. Is there anyone who knows a possible solution for this? The effect on HFM is that is not possible to create an application, since I always get an error that says "Server execution failed"
    Error Reference Number: {E68F87E6-588E-4665-862C-AAB02CB299DA}
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServerImpl.cpp;Line: 3522;Ver: 11.1.1.3.0.2413;
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 1115;Ver: 11.1.1.3.0.2413;
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 857;Ver: 11.1.1.3.0.2413;
    Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxClient.cpp;Line: 2106;Ver: 11.1.1.3.0.2413;

  • Invoice Validation Error ORA-06512: at "APPS.AP_APPROVAL_PKG", line 111124

    All,
    I am getting below error message from log file after Invoice Validation program error out, please advise.
    I could not search on "ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124" search, but found other errors and able to see we are very much higher file version than the note id advised.
    Please help any one for this issue.
    Payables: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    APPRVL module: Invoice Validation
    Current system time is 01-MAR-2013 03:40:12
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    p_option='All'
    p_inv_start_date='2013/02/01 00:00:00'
    p_inv_end_date='2013/02/28 00:00:00'
    p_trace_flag='N'
    p_commit_size='1000'
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AL32UTF8
    Enter Password:
    MSG-00101: Error occured in BATCH_APPROVAL()
    MSG-00102: Error Code : -20001
    MSG-00103: Error Message : ORA-20001:
    ORA-06512: at "APPS.APP_EXCEPTION", line 72
    ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124
    MSG-00000: When Others:User-Defined Exception
    REP-1419: 'beforereport': PL/SQL program aborted.
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-1419: MSG-00101: Error occured in BATCH_APPROVAL()
    MSG-00102: Error Code : -20001
    MSG-00103: Error Message : ORA-20001:
    ORA-06512: at "APPS.APP_EXCEPTION", line 72
    ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124
    MSG-00000: When Others:User-Defined Exception
    REP-1419: 'beforereport': PL/SQL program aborted.
    Report Builder: Release 10.1.2.3.0 - Production on Fri Mar 1 03:40:15 2013
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 42770000.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 01-MAR-2013 04:06:57
    ---------------------------------------------------------------------------

    Please post the details of the application release, database version and OS.
    Please also see these docs.
    Invoice Validation (APPRVL) Errors Out With ORA-20001: APP-SQLAP-10000: ORA-00060 [ID 1460249.1]
    R12: Invoice Validation Is Failing When Running With Parameter 'ALL' [ID 1115016.1
    R12 Payables Invoice Validation Error: Unexpected error occurred during Tax Calculation. [ID 961182.1
    Ap Invoice Validation Errors: P-1419: Msg-00101: Error Occured In Batch_approval [ID 1140828.1]
    Invoice Validation Error : REP-1419:ERROR OCCURED IN BATCH_APPROVAL() [ID 1120213.1]
    R12: Validate Invoice Errors APP-SQLAP-10000, ORA-01403 and ORA-20001 [ID 1308869.1]
    Thanks,
    Hussein

  • Crystal report for visual studio 2010 data source object is not valid error

    Hello,
    I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
    On my developer station, this operation works without problem but on client station, I get this error.
    The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
    Can someone help me?
    Thank you.

    Thank's for your answers
    Dim rsPkLst As ADODB.Recordset = Nothing
    Dim report As New crPickingList
    ' Fill ADODB.Recordset with SQL Statment
    If rsPkLst.RecordCount > 0 Then
          report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
    EndIf
    This error appears during  "report.SetDataSource(rsPkLst)" instruction.
    ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
    This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
    Developer and client station runs under Windows XP SP3.
    On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
    On client side I install CRRuntime_32bit_13_0_1.msi.
    Both stations use Microsoft .Net Framework 4.
    Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
    (I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
    David.

  • Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

    I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine.  I have only built the machine, and tried to load the Drivers.
    I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD.  I identified that the Bluetooth driver was the issue.  I then did not load the Bluetooth
    drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os.  (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
    I have not received a single Update either.  The Auto update feature claims that I am up to date.  I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
    Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain.  Also the results of the sfc /scannow are copied below.
    My Questions
    I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom.  Will you take a look??
    Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
    Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
    Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
    drivers work. (including the blue tooth)
    The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
    Errors and Results.
    There are also a number of logs that show various Crit, Error, and Warning logs.  I will include those if need be.
    This is the majority of the error messages, and I have missed the opportunity to capture others.
    Internet explorer encountered Validation errors:
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : comctl32.dl
    iii.     
    Assert offset: 00133A2A
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 008BE823
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0040F9E8
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : iertutil.dll
    iii.     
    Assert offset: 001DEC51
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 00014159
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Microsoft Management Console Encountered a Validation Error
    Validation Error
    i.     
    Process Name: mmc.exe
    ii.     
    Module Name : ieframe.dll
    iii.     
    Assert offset: 00000000006C9283
    Scripted Diagnostics Native Hot encountered a Validation Error
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : urlmon.dll
    iii.     
    Assert offset: 00000000001A0A73
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017f32
    Windows System Assessment Tool encountered a validation error
    Validation Error
    i.     
    Process Name: winsat.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017F32
    Windows Explorer Encountered a validation Error
    Validation Error
    i.     
    Process Name: Explored.exe
    ii.     
    Module Name : thumbcache.dll
    iii.     
    Assert offset: 00000000000300BE
    AI Suite 2 encountered a validation error
    Validation Error
    i.     
    Process Name: AI Suite 2.exe
    ii.     
    Module Name : ntdll.dll
    iii.     
    Assert offset: 000686BD
    the number “2” is the substitutedfor the roman numeral 2
    I believe that this is part of the MB Suite.
    My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download.  Activated on 8-12-2012
    Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
    Chip Set: bx80619i73930k
    2x Memory: cmx16gx3m2a1600c11 Corsair
    Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
    Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
    Generic optic drive: SH-222bb/bebe Samsung
    Here is the Microsoft Fix It error code
    Assertion Failed!
    Program:…
    File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
    Line: 2131
    Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
    For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
    (Press Retry to debug the application – JIT must be enabled)
                    Abort    Retry     Ignore
    Abort
    Closes the program
    Retry
    Repeats the error
    Verbatim
    Ignore
    Closes the program
    Nothing happens
    Here is the Microsoft Genuine Advantage Diagnostic Report
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Validation Code: 0
    Cached Online Validation Code: N/A, hr = 0xc004f012
    Windows Product Key: *****-*****-*****-*****-8C7YB
    Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
    Windows Product ID: 55041-146-2397786-86942
    Windows Product ID Type: 6
    Windows License Type: Volume MAK
    Windows OS version: 6.1.7601.2.00010100.1.0.004
    ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows 7 Enterprise
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_rtm.101119-1850
    TTS Error:
    Validation Diagnostic:
    Resolution Status: N/A
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
    OGA Data-->
    Office Status: 109 N/A
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
    Browser Data-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
    File Scan Data-->
    File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
    manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
    Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults> 
    Spsys.log Content: 0x80070002
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows(R) 7, Enterprise edition
    Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
    Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
    Installation ID: 000792957432055771547065313840421702569731971164600080
    Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial Product Key: 8C7YB
    License Status: Licensed
    Remaining Windows rearm count: 5
    Trusted time: 8/12/2012 5:47:25 PM
    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: N/A
    HealthStatus: 0x0000000000000000
    Event Time Stamp: N/A
    ActiveX: Not Registered - 0x80040154
    Admin Service: Not Registered - 0x80040154
    HealthStatus Bitmask Output:
    HWID Data-->
    HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
    OEM Activation 1.0 Data-->
    N/A
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID Consistent: N/A
    BIOS Information:
      ACPI Table Name           OEMID Value     OEMTableID Value
      APIC                                    ALASKA                               
    A M I
      FACP                                   ALASKA                               
    A M I
      HPET                                    ALASKA                               
    A M I
      MCFG                                 ALASKA                               
    OEMMCFG.
      SSDT                                    AMICPU                              
    PROC
    Scan Now Results
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>sfc /scannow
    Beginning system scan.  This process will take some time.
    Beginning verification phase of system scan.
    Verification 100% complete.
    Windows Resource Protection did not find any integrity violations.
    C:\Windows\system32>

    Thank you for your valuable time.
    I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
    The Memory Tool did not find anything amiss.
    As per another thread I am going to try flashing the bios as well with the updates.
    Following are the Chkdsk results.
    Are there any other suggestions?
    Chkdsk Results
    Checking file system on C:
    The type of the file system is NTFS.
    A disk check has been scheduled.
    Windows will now check the disk.                        
    CHKDSK is verifying files (stage 1 of 5)...
      89600 file records processed.                               
              File verification completed.
      221 large file records processed.                                     
    0 bad file records processed.                                       
    1596 EA records processed.                                             
    44 reparse records processed.                                      
    CHKDSK is verifying indexes (stage 2 of 5)...
      131874 index entries processed.                                        
    Index verification completed.
      0 unindexed files scanned.                                           0
    unindexed files recovered.                                       CHKDSK
    is verifying security descriptors (stage 3 of 5)...
      89600 file SDs/SIDs processed.                                        
    Cleaning up 36 unused index entries from index $SII of file 0x9.
    Cleaning up 36 unused index entries from index $SDH of file 0x9.
    Cleaning up 36 unused security descriptors.
    Security descriptor verification completed.
      21138 data files processed.                                           
    CHKDSK is verifying Usn Journal...
      36120296 USN bytes processed.                                            
    Usn Journal verification completed.
    CHKDSK is verifying file data (stage 4 of 5)...
      89584 files processed.                                                
    File data verification completed.
    CHKDSK is verifying free space (stage 5 of 5)...
      476262075 free clusters processed.                                        
    Free space verification is complete.
    Windows has checked the file system and found no problems.
    1953410047 KB total disk space.
      48065140 KB in 61610 files.
         43468 KB in 21139 indexes.
             0 KB in bad sectors.
        253139 KB in use by the system.
         65536 KB occupied by the log file.
    1905048300 KB available on disk.
          4096 bytes in each allocation unit.
     488352511 total allocation units on disk.
     476262075 allocation units available on disk.
    Internal Info:
    00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00  .^...B..........
    e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00  ....,...........
    6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00  m.u.i...........
    Windows has finished checking your disk.
    Please wait while your computer restarts.

  • Calendar Component and validation errors

    Hi,
    For the first time I am trying to use the Calendar component to insert a date field in my SQL Server db.
    The problem: I can insert a date column only if its of type java.sql.Timestamp.
    As Timestamp extends the date object..
    I tried to bind the selectedDate field as <Timestamp> Object[refractored in my class file] and when i tried to update by DB it throwing a Validation error.
    If I bind it as a Date Object directly I am getting an EvaluvationException
    as date objects cannot be inserted directly
    Am i missing something here or is there a proper way of implementing it.

    Its a fairly direct question about object conversion problem in creator
    Basically the selectedDate parameter of the JSC Calendar component
    needs to be pointed to a Date Object
    If we need to insert that date information to a SQL Server column the equivalent data type should be java.sql.Timestamp which extends Date.
    So if we point the selectedDate parameter as a Timestamp object the creator throws an illegal argument exception.
    Can some one clarify how to resolve this issue?

  • How to delete empty row without validation error in ADF Table(EMP)

    Hi Everyone,
    I am using EMP Table in ADF jspx page to insert the data into database.when i insert a row into table by createInsert operation,it inserting the row.But I need to delete that row immediately with out entering any value.
    But it showing some validation error at empno.Is there any ways to delete the empty row?if not,what are the reasons that we can't delete the row.
    could any one tell me the reasons!!
    Thanks in advance!!
    With Best Regards,
    Amar
    Edited by: 973755 on Dec 11, 2012 6:42 AM

    Amar,
    I am little confused with your logic here.....
    but if you are trying to remove the row by clicking Remove button, you can set the immediate property to true and that remove function will run without executing any entity validation.......
    -R

Maybe you are looking for

  • Regarding EMAIL in inbox using SO_NEW_DOCUMENT_ATT_SEND_API1

    HI all, I am using SO_NEW_DOCUMENT_ATT_SEND_API1 module to sent emails on external email IDs.Can anyone guide me if this function module also sends email to SAP inbox correspoding to email addrees on which email is sent? Also guide me how to send doc

  • Extraction of purchase order condition data

    Hello all- I do see that SAP has delievered the 2LIS_11_VAKON infosource which as by sales order the conditions within that sales order per item.  However, I need to get similar information from the purchasing side.  Ideally, I would like to get by p

  • Проблема с драйвером для видеокарты /The problem with the driver for your video card "atikmdag.sys"

    При загрузке системы ноутбук стал выдавать "синий экран". Запускается только в безопасном режиме. Переустановил систему все работает, но без драйверов на видеокарту. Как только устанавливаешь драйвера на видеокарту просит перезагрузиться, после перез

  • Deliver ePub with iTunes Producer strange error.

    I have a validated epub file, but when I try to deliver with iTunes Producer to iBookstore, I get the following error: "com.apple.transporter.util.StreamUtil.readBytes(Ljava/io/InputStream;)[B" Can someone help me out?

  • Saved PDF not compatible with PDFTK 1.12

    We're using Adobe LiveCycle Designer ES 8.2. If we create a PDF-Formular it is not working with the PDFTK version 1.12. Unfortunately it is not possible to upgrade the PDFTK version on the server nor to downgrade the Adobe LiveCycle Designer. Is ther