StoragEdge 3510 FC HDD LEDs are blinking continuously

Hi,
I am facing problem with Sun StoragEdge 3510FC with 146x12 and 2 arrays of RAID -5.
Problem Descrp: After upgrading Firmware from 3.27r to 413c. the HDD LEDs are blinking continuously but this problem is started after upgrading the New Firmware.
Please let me know if anyone knows the solution.
regards,
vpatil.

Sounds like the 'media scan' functionality of the new firmware. You can check its running with show media scan from sccli. You can also abort it if you wish

Similar Messages

  • Pavilion DV4-1070ee got stuck on a blank screen and numlock and caps lock LED are blinking..

    My pavilion dv4-1070 got stuck on a blank screen and numlock and caps lock LED are blinking... it happens when i update the BIOS.. please help... thanks

    Hello, 
    I see that you're having an issue with the notebook giving you a black screen. I also noticed you said only the NumLock and Caps lock is blinking. 
    Now, the BIOS update could have because this but we won't know until you let me know how many times the LED blinks. 
    Here is a chart which will tell us what's causing the issue. 
    Please let me know the outcome. 
    THX

  • T420 HDD LED lit Optical Drive

    Running Windows 8 Enterprise.  The machine has all up-to-date Lenovo drivers and patches.  When the optical drive goes into sleep mode, the HDD LED will stay continuously lit.  Wake up the optical drive and the HDD LED functions as designed; when the optical drive goes to sleep issue persists.
    Any thoughts?

    Unplug the unpowered devices from the IDE chain, or supply power to them.
    Create a hardware signature and throw the dog a better bone Suggestions on posting and getting better answers

  • HDD LED before Power LED

    My Neo 2 PS motherboard seems to work a little humorously... When I press the power on button, the red light would always appear first. After a few seconds, the green light will come on. Not sure why this is happening... The computer starts up a much later. Please advice...

    Quote
    Originally posted by Maesus
    a few seconds?!? did you swap the red and green led yourself?
    No. The power LED would remain on and the HDD LED will blink when there's hard disk activity. Moreover, when I push the power button, I will hear things inside starting up like in some Sci-Fic movies - part by part ...  

  • Led lights blinking DV7 and DV4

    Alrighty   i got two machines  one running vista  one runing windows  7    the one running vista is a DV7 and the DV 4 runs 7    
    both computers do not boot at all   the fan turns on the backlight on the display turns on and the memory units are all fine.  the lights on the keyboard ( scroll and caps ) are blinking continuously, 3 sec between each blink   ive tryed everything. need help fast  these computers are inportant need them running again!!!   please help!

    Hello karwath29r.  I understand that you're unable to get either of your notebooks to boot.
    The flashing CAPS LOCK keys indicate an error.  It will be very helpful to be able to determine which blink code you are getting.  Take a look at this document and determine which blink pattern you're getting.
    Let me know the result.  Have an excellent weekend!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • HDD LED blinks every 2 seconds

    I just noticed that my HDD led blinks every 2 seconds. I can't hear any disc activity and I can't see it in iotop.
    udisks --inhibit-all-polling
    Inhibiting polling on all devices. Press Ctrl+C to exit.
    doesn't help. Any ideas?

    After 30 seconds:
      415 be/4 root          0.00 B     24.00 K  0.00 %  0.00 % syslog-ng   
    10 seconds later:
       26 be/7 root          0.00 B      4.00 K  0.00 %  0.00 % [khugepaged]
    after one minute:
      259 be/3 root          0.00 B     68.00 K  0.00 %  0.18 % [jbd2/sda10-8]
    After some time:
    3652 be/4 mk            0.00 B     84.00 K  0.00 %  0.00 % firefox
    1102 be/4 mk            0.00 B     16.00 K  0.00 %  0.00 % kdeinit4: plas~ktop [kdeinit]
    That's all for now.

  • Power Injector AIR-PWRINJ1500-2 LEDs Continously blinking

    Hi,
    I am facing a strange problem with the AIR-PWRINJ1500-2.
    At times the injector behaves perfectly fine but once Switched Off & again Powered On, all 3 LEDs, never become stable & blink continuously.
    Has someone seen such a behavior ? Pls, share.
    Thanks in advance.

    Hey Ahmed,
    My understanding is the power injector is not supported for the 1552CU and your only powering options are the following:
    1552C/1552CU
    • 40-90 VAC, 50-60 Hz, quasi-square wave, Power over Cable
    • 12 VDC
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps11451/data_sheet_c78-641373.html
    Cheers,
    Erwin

  • HDD LED Light **PLEASE HELP***

    I am not sure what I did wrong, but my left case light (I believe called the HDD LED) keep going on and off. I don't know if this is a healthy situation for the computer or not... Is this light suppose to be steady at all times? Why is it blinking every few seconds?
    Please help with your knowledge,
    Thanks in advanced!!!

    Use the HDDs on the primary IDE channel. One Master One Slave. On the secondary channel mount the DVD as master and the CD rom as slave.
    Yes if you have a window open for browsing and a MP3 playing in the background you are likely to have some HDD activity.
    If you turn those off and still get activity then disconnect from the internet if you are on Dialup or remove the Ethernet cable if you are on High Speed connect. If the lED goes out after a while then it is likely that you are infected or have a serious spyware issue. It does not matter if you are on a clean install. If the modem was hooked up during your install it only takes four seconds to become found and infected these days on the internet if your firewall was not up or and you had a connection to the internet.

  • K8N SLI-FI - HDD LED always on

    To anyone that has used this board, have you had any problems with the HDD LED always being on??
    One of my customers returned two of these boards to me saying that his HDD LED would always stay on with both of the boards.  Thinking that he was just plugging in the LED backwards or something, I tried it for myself and sure enough the HDD LED would always be on.  Everything else worked fine with the board, POST fine, installed WinXP fine, but the LED would always stay on, not blinking or anything, when the hard drive was actually working/accessing.  Even running memtest, the LED stayed on solid.
    Hooking the LED up in reverse caused the LED to no work at all.  Tried with IDE hard drive and SATA drive.
    I'm just wondering if anyone else has this problem.  I don't have any more of these boards in stock to test with . 
    Thanks.

    No, the power LED is working fine.  It stays on like it should.  When both LEDs are hooked up they both are on constantly.  I've tried different LEDs I have lying around the shop, mostly from broken cases, and any LED I plug into the HDD LED connector stays on constently.  Any LED plugged into the power LED connector turns on and stays on like it should.  By reverse I ment that I connected the positive to the negative and negative to positive.  Just as a test.  And the LED did not light up.  Which is supposed to happen I think.
    It's the first time I've seen this problem and the only conclusion I can come up with is there is something wrong with the boards.  It's just where there are two boards, both with the same, silly, little problem. 
    Could it be the brand of hard drive??  I've tried with an IDE Maxtor and IDE Seagate, and a SATA Seagate.  Is there a setting in the BIOS that would cause this??
    Thanks

  • D-leds just blinking FAST, no boot!

    Hi!
    I have a MSI 815EPT PRO system, P3 server 1.4GHz processor, 384MB PC-150 SDRAM. All things (mobo, processor and memory) worked fine together(tried with my old PSU)  before building the computer into the chassis. Now when all other parts (DVD-ROM, HDD and PCI graphics card (yes, just trying with an old one ) have been installed, system refuses to boot, just blinking fast (5 times/sec) all d-leds + memory led + HDD and power led front panel lights. There's also strange knocking noise - in the exactly same tempo as lights are blinking (synchronized) New power is Nexus supersilent 350W. What could be a reason?
    I found a similar problem here in MSI forum, bu the question was unresolved.
    Please HELP!!!

    new case
    did you check all the stand offs
    sure you never left an extra one under the board ?

  • 990fxa-gd80 HDD LED

    Hello,
    Now this might be a simple question or it might even show how little i know about PCS.
    But i recently installed the 990fxa-gd80, ever since i installed it the HHD LED has been blinking. Now i know the manual says that if its on it means its working , reason im asking is all the other LEDs on the board are shining in blue, this one is in red.
    Do i have a problem or is this me worrying too much?

    Normally HDD leds blink when read/write operations are ongoing.
    As many operating systems do read/write all the time, even when doing "nothing", they do read/write to e.g. save the registry or do housekeeping.
    Vista, to name one, is very busy when doing "nothing"

  • My 790fx GD70 had approx 3 years of perfect operation, now the HDD led is red :(

    Hey everyone I'm new to the msi forums here, but I built a gaming rig about 3 years ago and its been running fantastic ever since.
    Ive been looking to buy an Radeon 7950 and finally decided on the HIS 7950 IceQ boost clock from newegg for 299.
    So I opened up the case just to make 100% sure that I had the necessary 2- 6 pin power connectors, which I did . I did this while the pc was on (I know dont shoot me!) I didn't touch anything on board just a few wires from the psu to look at the connectors, an my hand slighty bushed the side intake fan, no stoppage or anything like that.
    When I looked up after I put the couple wires back I had no display, no keyboard or mouse, and the red HDD led was lit above the mobo power button :( :(.
    Ive checked all connections and they seems to be fine, my brother has the same board in his rig, so ill take a pic of his and double check mine just to be totally sure.
    The pc powers up with either the case or mobo buttons, all fans (cpu, psu, case, gpu) power up and run normally. All lights are blue that I can see, except for the red HDD led, no display, keyboard, or mouse. Also I cant power the system down by holding down either case or mobo buttons, only by switching the psu off.
    After reading up on this forum and a couple others ive come to a couple possible conclusions:
    Either something came unplugged which ive some how missed, my mobo has shorted somehow after approx 3 years of perfect operation, or my psu has blown.
    Does anyone have any other suggestions for me? Has anyone seen something like this happen before?
    The tough thing is this pc is currently used for music recording through pro tools and was about to become the main media display pc at my church, after the purchase of the new video card, so having it down meant no music recording today at church :( :(
    System Specs:
    AMD phenom II x4 955
    MSI 790fx gd70
    Asus Radeon 5750
    Mushkin Redline 1600mhz 4x2
    Crucial SSD 120gb
    Seagate 150gb HDD
    Western Digital 1tb HDD (pro tools session storage)
    LG CD/DVD RW
    Thanks in advance for any help you guys can give! 
    By the way I wrote all that on my phone! Lol

    Thanks for all the help so far you guys!! Ok so i spent some more time on it and did what you both suggested. Reseated the ram, 2 sticks of 4 gb 1600 mushkin, made sure that all satas were seated properly on both the mobo and HDD sides, and checked all power connections to the board. After that i cleared cmos, and pulled the battery just to be sure.  I checked the case pwr and reset connections on the front of the case and at the mobo, and everything seems to match my brothers board connections (went and took a few pics of his). I also moved my gpu up to the top slot of the mobo so i could see the little led screen on the mobo better.
    So i fired her back up, and the dang red light was still on :-(. Also the little led screen isnt post anything at all, no numbers or letters are showing. I believe my brothers read 42 when i was taking pics of his rig (must be the code for all-is-well lol).
    My psu is an 850 watt Xion. For  + 12v1 and +12v2 its 18A for +12v3 and +12v4 it reads 20A and 22A respectively.
    I dont see xions around much anymore, did they go out of business or something?
    So do you guys think its probably the mobo since its not giving a display at the little led screen? Did it just happen to blow when i had the side panel off, could i have done something without touching the board to cause this? Maybe handling the wires? Could it possibly be the psu?
    It looks like i may be in for an earlier mobo and cpu upgrade then i had originally planned :-P
    Oh also my case is a full tower Azza, im not sure of the model, but its always had great cooling! (But i dont overclock lol)
    Thanks so much again!

  • Satellite A300-PSAG8E - HDD indicator is blinking even when i do nothing

    these are my problems
    1. My HDD indicator is blinking even when i do nothing ( blinks every half second or so)
    2. When I go somewhere my display turns off and when I move my mouse display turns on but nothing is happening. Everything is standing still (sometimes 20 seconds, sometimes 2 or 3 minutes ) and than he is ready to work.
    Upgraded BIOS to version 2.20
    OS: Windows 7 Ultimate
    Laptop: Toshiba Satellite A300-PSAG8E
    Anyone know the solutions?
    Need help please! Thank you

    > 1. My HDD indicator is blinking even when i do nothing ( blinks every half second or so)
    Even if you dont touch the notebook, the HDD is running and different applications access the data. The applications and processes which are running in the background would cause this blinking. Note; this is not a problem!
    > 2. When I go somewhere my display turns off and when I move my mouse display turns on but nothing is happening. Everything is standing still (sometimes 20 seconds, sometimes 2 or 3 minutes ) and than he is ready to work.
    Disable the stand by modem and disable the settings which disable the screen while notebook is not in use. This can be done in Windows 7 power management.

  • MacBook Pro won't turn on after crash. Magsafe charger LED light blinking rapidly

    Hi. I hope you can help me.
    I have a macbook Pro 13", from september 2012, which crashed earlier today:
    I was charging my iphone through USBport on my macbook (not an Apple USB-iPhone power-cable) .
    My MacBook was charging through the magsafe charger (about 30% power i think).
    I took the phone out to make a call, when that was done, I reconnected the phone to my mac for further charging.
    My MacBook crashed instantly. I took out the USB cable, tried to turn on my mac, but nothing happened. There was no light in the magsafe LED.
    The crashing has happened before, when I've been charging my phone through USB connections, but I've always been able to turn my mac back on.
    This time nothing happened when I pushed the power button. It had comepletely shorted out.
    BTW. Earlier today I received a "storage almost full" warning on my mac, and I was actually in the middle of cleaning that up (deleting downloads and trash files).
    Typical and just my luck!
    Now, a few hours later, I tried restoring SMC (shift+ctrl+alt+power), and now the charger LED is blinking rapidly (but faintly) orange.
    Do you have any ideas on how to fix this? All applestores nearby are closed today, I live in Denmark.
    Thank you so much in advance!
    Kind regards Emilie

    Try the SMC reset again:
    https://support.apple.com/en-us/HT201295
    Then try a NVRAM reset:
    https://support.apple.com/en-us/HT204063
    Then try a safe boot:
    https://support.apple.com/en-us/HT201262
    If no success, then you will have to take it in for service.
    Ciao.

  • The HDD LED doesn't work !! Any Idea ?

    Hi everyone ..
    I have MSI Neo Platinum Mainboard , I installed a S-ATA Harddisk only on the Mainboard , no ATA , but the HDD LED on the Case doesn't work .. There is no Light ... Is this light only for ATA Harddisks wich are installed on IDE ??
    Any idea plz ?

    Exactly...reverse the polarity at the connection....or your HDD activity LED is toast...I've bought new cases where those things just did not work.

Maybe you are looking for