Store issues after updating to Windows 8.1 Update 1. 0xc03f42e5 / 0xc03f424e

On my new laptop I was installing store/modern apps just fine earlier tonight, now since the update to the new 8.1 update the Store has become very unstable. When I click install on an app in the store, I get the loading animation at the top for a very long
time, then the store closes. It does however add the app to my app list, though in an "Error" state.
If I click on this app, I get the error "This app can't install. Check the Windows Store for more info about Adobe Photoshop Express.", followed by a link to "Go to the Store". If I click the link, it takes me to the Installations screen
where I see this app (and others I've tried to install), all with "This app wasn't installed - view details.".
Clicking on that link gives me "Something happened (how very specific of you Microsoft) and this app couldn't be installed. Please try again. Error code: 0xc03f42e5". I've also had error code 0xc03f424e too. Bizarrely, neither of
which bring up ANY results on Google or Bing. Have I found a brand new bug here?
I've tried rebooting, reinstalling my NIC and Wireless NIC, doing a troubleshooting on Windows Update (which did say it fixed stuff), a sfc /scannow. The only thing I've not done that I can think of is to create another admin user and delete the profile
of this user, because that's a hassle I'd rather not have if I can avoid it.
Any MS employees here care to lend me a hand please?
Edit1: The error code that the Windows Update troubleshooter indicated, 0x80070490, pointed me to an article that recommended I run the following commands:
DISM.exe /Online /Cleanup-image /Scanhealth
DISM.exe /Online /Cleanup-image /Restorehealth
The first of which is running now, though after 5 minutes it's still at 20% so might take a while.
Edit2: Well the first above command said it found no problems after about 20 minutes. Am running the second restore one though anyway, just in case.

Hi,
Try this command to fix your problem:
Windows App Store doesn't load after 8.1 Upgrade
http://blogs.technet.com/b/ouc1too/archive/2013/10/19/windows-app-store-doesn-t-load-after-8-1-upgrade.aspx
or, you can use WSreset.exe tool, or manually trying to clear the cache from the Windows\SoftwareDistribution\Download folder.
Alex Zhao
TechNet Community Support

Similar Messages

Nokia Lumia 928 apparently died after an attempted Windows 8.1 update. Replacement phone arrived the next day. How can I restore my contacts, photos, etc.? Backup assistant is no help and I don't know how to access the Cloud.

Nokia Lumia 928 apparently died after an attempted Windows 8.1 update. Replacement phone arrived the next day. How can I restore my contacts, photos, etc.? Backup assistant is no help and I don't know how to access the Cloud.

Did you have the phone set to backup things to the One Drive on Microsoft servers?

My magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.

hi,
my magic trackpad has issue with 3 finger swipe between applications or swipe issue after OS X 10.8.1 update.
Anyone facing the same issue? Thanks.

Did you check System Preferences - Trackpad ? Also I'm not sure exactly what 3 fingered swipe are you referring to?

HT2305 Software Update for Windows says "New Updates Available" but yet it lists none.

Software Update for Windows says "New Updates Available" but yet it lists none.I have read other threads here on the Apple Support forums, but have yet to find anything that works for my situation. This Issue is driving me nuts. Please Help!

I went into checking with Apple Software Update then I clicked Control Panel - "Repair" It was restored to start menu, thank you much thumb up to b noir Big Helping me! David

Updated my Windows 8 and updated Itunes to newest versions and now my Ipod 7th Generation Nano is not recognized on my computer or Itunes anymore. I have went thru all steps instructed and offered here so what else can I do?

Recently have updated my Windows 8 and updated Itunes to mose recent version available. My Ipod 7th Generation Nano worked, connected and synced without difficulty prior to this updating, Now when I plug into my computer it will pop up Itunes but say that this Ipod is not recognized. I have done multiple steps offered to try and nothing has worked. Any other suggestions would be helpful. I just got this Ipod for Christmas and now can't even use it to sync content anymore.

Try a different cable. And are you connecting directly to your computer or through a USB hub?

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

App Store Issues After Mavericks Update

Hi. I upgraded from Mountain Lion to Mavericks yesterday.
When I run the App Store app, it shows that IMovie is available for an update. When I click the update button, I get a message saying my IMac (bought in late 2007) doesn't have the video card requirements for the new version of IMovie. The problem is that every time I run the App Store app, it still lists IMovie as an update. Is there a way to prevent it for continuing to list IMovie as an update?
I also own IWork '09. After I updgraded to Mavericks yesterday, I was able to download the new Pages, Numbers and Keynote for free. Apparently, the download also slightly updated the versions from IWork '09. Today, I ran the App Store app again, and it redownloaded the updated '09 versions of Pages, Numbers and Keynote. I have no idea why it downloaded them all again. Is there any way to stop it from doing it again?
Thanks.

I had this issue on 3 different macs when upgrading to Mavericks.
I resolved it by deleting the Compressor app and the "Compressor" and "Apple Qmaster" folders from Library\Application Support\, emptying the trash, rebooting the computer and reinstalling from the App Store.
Unfortunately this did delete all of my encoding presets and qmaster cluster/settings but the app is up and running again.
Also Get Info on the Compressor app after reinstalling and disable App Nap.
Good luck!

Networking Issues after Upgrading to Windows 8.1

I have a Windows 8 desktop PC that is working fine with my network. I can browse the Internet fine using all major browsers etc. After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error. I normally have to refresh 2-3 times to get a new page to load, sometimes even more. Everything works
fine from a laptop connected at the same time so it isn't an network issue with my provider.
I thought this might be a driver issue with the two on-board Marvell wired network adapters. I wasn't able to rollback the driver to older versions I found on the Internet. I then purchased another network card, Intel Desktop gigabit and the
issue still persists with that adapter. I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled. I tried a new network cable and no luck either. I also tried resetting the IP stack using
the various netsh commands.
After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store. I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
some of the recent guides that are available. That all worked but it didn't fix the networking issues.
I re-installed Windows 8.0 and the networking is now fixed and back to working normal again. I'd like to try again but I think I will have the same problems. I can't imagine why this would be a driver issue as I tried 3 different network adapters
and two installs of Windows 8.1. Any ideas what would be the cause of the Windows 8.1 issue?

HI,
Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
the performance of win8.1.
Please also test this issue in safe mode with networking.
Please refer to:
Windows Startup Settings (including safe mode)
http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
I’d like to share the following article with you:
Wired and wireless network problems
http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
The issue occurs in safe mode as well under Windows 8.1. The motherboard is an Asus P5B Premium, however it works on Windows 8. How would I update the chipset when booted into Windows 8.1? In Device Manager it wasn't allowing me to update
the network drivers as they were newer versions already installed.
Edit: I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.4.0.1026 and the issue still occurs. I am also running the latest BIOS that is available.

Some issues after clean installing windows 7 pro 64bit

Hi,
I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine. What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
Can anyone help me? Never had to deal with these issues.
Thanks in advance
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

Hello,
Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI? If so, did that work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lenovo driver issues after upgrade to Windows 10

Hi, i recently upgraded my Y50 to windows 10 after i got the notification. Now the Fn+F6 to disable the trackpad and Fn+F5 for airplane mode don't work. others seem to be working properly. I was unable to find any rivers. Also, i noticed that league of legends now runs at 60fps when uncapped, while previously it ran at about 180. I am not sure if the nvidia graphics card is being detected or if it is using the intel one.

the problem has been fixed by 1- reinstalled win 10 2- win 10 removed intel hd 5500 driver as expected , but i didnt update it manually nor by update from device manager nor make any changes , so i ran windows 10 update tool from system and made all 100% update after restart things are ok now every thing is ok and new intel hd 5500 driver has been installed by win 10 update tool : 10.18.15.4248 //driver date : 29/06/2015 also invidia 840m driver has been updated thanx for any try to help and if any one still stuck with black screen the problem is that win 10 read two monitors instead of 1 so you have to click "windows button + P while black screen already on " and try to hit and click on first choise or other choises till you can see the desktop , sure u cant see any thing while u are trying to choose but you should try or may be you connect another monitor or tv and fix this issue by win button + P good luck

After Update to windows 8.1 update 1 going to problem ? help me ?

Hi there dev
I installed windows 8.1 on my hardware and enabled hyper-v and installed 8.1 on hyper-v
after I update both windows to 8.1 update 1 my virtual windows 8.1 going to this problem :
now my right click ( context menu ) works on desktop but can't work in the start screen any more
I don't have :
1-pin to star or unpin from start
2-pin to taskbar or unpin from taskbar
3-uninstall
4-resize
no one of these context menu works in my start screen in my virtual windows 8.1 update 1
but all of them work completely in my host windows 8.1 update 1
help me how to resolve this problem
NOTE : The Generation of virtual windows 8.1 update 1 is Generation 2 while I created it in the Specify Generation page .
great thanks
Regards :
Raha
whit the best regard : Raha

puedes optar por aplicar los parches de manera manual
http://blogs.itpro.es/octaviordz/2014/05/05/nuevo-parche-para-el-update-de-windows-8-1-kb2919355/
http://blogs.itpro.es/octaviordz/2014/04/11/inyectar-los-paquetes-de-actualizacion-msu-de-manera-offline-en-windows-8-1/
http://blogs.itpro.es/octaviordz/2014/04/10/windows-8-1-update-disponible/
http://blogs.itpro.es/octaviordz/2014/04/05/actualizar-de-windows-8-1-2012r2-a-windows-8-1-ws2012r2-update-con-script-de-powershell/
Freelance-IT http://www.freelance-it.com.mx

Sleep and Shutdown issues after upgrading to Windows 10

Hi there,So I'm having issues with sleep and shutdown after I upgraded to Windows 10, the laptop won't go to sleep or shutdown properly. The screen turns off, but the power LED stays on and the fan as well. If I chose sleep it won't wake up no matter what I try, and I'd have to perform a hard shutdown everytime.Any solution for this problem?Thanks.

**I have posted this in another area with the same issue** YES!!!!! A Solution that worked. Spread the news. It has to do with the Intel Virtualization Tehnology. Didn't know what that was until this issue came up in Windows 10. First, find out if this is your issue. 1. I installed the 'Intel Processor Identification Utility' directly from Intel.2. After installation, open the program and go to the 'CPU Technologies' tab.3. If it says 'YES' for Intel Virtualization Tehnology, proceed. Solution...(at least on my system) 1. The next thing you have to do is go into the BIOS. If you have not done this before, proceed at your own risk. You need to restart the computer and enter the BIOS (for me I hit F10 at the HP screen)2. Within the BIOS, there is an 'Advanced Options' section3. In this section there is a line for 'Intel Virtualization Tehnology' and it will say enabled or disabled. My computer said disabled.4. If this is the case, change the option to 'ENABLED'; then SAVE and EXIT from the BIOS. The Computer will restart and from that point on Shut Down, Sleep, etc. has worked. WOW this was a frustrating issue. Almost went back to Windos 8. I take no credit for this solution, I pieced it together from other posts on this issue. Hope this helps.

Server 2012 R2 Update vs Windows 8.1 Update

Hi @all,
i am not sure about this Topic/request, but i hope you can help me :)
I have a Notebook ... Dell Inc., XPS 15 9530
So i installed Windows Server 2012 R2 Update.
After Installation of OS i installed all Driver's from Dell HomePage (Windows 8.1 Driver's) directly from the CAB Package.
After this i installed all Windows Updates from Microsoft Update.
Now i see, that in Windows Server 2012 R2 in compare to Windows 8.1 Update some Features are missing
1.) USB\VID_8087&PID_07DC\5&791A5BE&0&9 missing
2.) ACPI\VEN_ACPI&DEV_0008
-> Bluetooth i don't got working see 1. and 2.
-> WLAN i got working with enabling Wireless LAN Service
3.) Internet Explorer Extensions are Missing so no Flash works...
So my Question is, which Features and Function's i don't have in Windows Server 2012 R2 Update compare to Windows 8.1
Please Help :)
By the way, my idea is...
Host: Server 2012 R2 incl. DHCP, NAT, WDS, WSUS, SCVMM/ScSM/ScOrch
Hypervisor's: VMware, HyperV, Citrix (all managed by SCVMM, ScOrch, ScSM)
virtual Machine's: DC, SCCM, Exchange, Lync, W8.1, W10, W7, W2K3, W2K8R2, W2K12, W10S

In addition to what Dave is saying about finding drivers from the vendor (Microsoft does not write drivers for those devices, so it is up to the hardware vendor to provide them), you have a pretty aggressive desire for your little notebook.
"By the way, my idea is...
Host: Server 2012 R2 incl. DHCP, NAT, WDS, WSUS, SCVMM/ScSM/ScOrch
Hypervisor's: VMware, HyperV, Citrix (all managed by SCVMM, ScOrch, ScSM)
virtual Machine's: DC, SCCM, Exchange, Lync, W8.1, W10, W7, W2K3, W2K8R2, W2K12, W10S"
A single physical machine can run only a single hypervisor - you have listed three. Your best option is to use Hyper-V and forget the others. If you are running a hypervisor on a system, you should not run any other services in the parent partition,
so your idea of running DHCP, NAT, WDS, WSUS, SCVMM/SCSM/SCO on the host in addition to Hyper-V is a bit of a pipe dream. That means you need to move those into VMs. You can most likely build all the VMs you have listed, but unless you have a laptop
with boatloads of memory, you are not likely to be able to get them all running at the same time. From what I can tell, your particular Dell laptop can have a maximum of 16 GB of RAM. That's pretty good, but far short of what you would need unless
you want everything to really limp along.
. : | : . : | : . tim
Hi Tim,
thx for the text, but the text doesn't answer my question...
I now, what i do, and why i want to work with scvmm.
host: w2k12R2 with DHCP, NAT, SCVMM, WDS, MDT, WSUS
1. vm = DC, DNS
2. vm = hyperV
3. vm = vmware
4. vm = citrix
5. - 10. vm = w7, w8.1, w10, w2k3, w2k8r2, w2k12r2 (all installed over mdt/scvmm)
11. - 17. vm = msx2010, msx2013, lync2010, lync2013, sccm, scsm, scorch (all installed over mdt/scvmm)
that i dont start 2 - 4 at the same time is correct but by the way i Need a lab where i can test on every Plattform ;)
but my request was about Bluetooth and Different Features from w2k12r2 to w8.1update... ;)

Nothing will download onto my iPod nano 5th gen since i updated to windows 8. i updated iTunes to version 11.0 and its not working. what do i do?

i updated to windows 8 and whenever i plug my iPod in it says it syncs but nothing is downloaded onto my iPod

can someone help plzzz!!??

How can I solve several issues after an automatic Windows update ?

Hi,
Would be great if you could help.
I use Windows 7. Some major Windows update must have been applied that really messed up a few things, including my Firefox browser.
Issue 1: All my bookmarks are gone.
Issue 2: When I try to locate the Profile Folder (to try and get my old bookmarks, permitted sites etc.) I get an error message instead. It reads "[path] refers to a location that is unavailable."
Issue 3: When I set Firefox as my default browser, the next day I have to repeat this step, and both icons in the start menu and on the taskbar are not there anymore.
Is there any way of fixing these issues?

Where was it stored?
If you've been using your phone as designed, you've been synching your contacts with a contact manager app on your phone or with a cloud service.
Just synch your contacts back.
If you've not been using your phone as recommended then you've lost your data.

Store issues after updating to Windows 8.1 Update 1. 0xc03f42e5 / 0xc03f424e

Similar Messages

Maybe you are looking for