Store reports in client m/c using destype=localFile in rwservlet

Hi,
i am trying to store the reports in client machine using rwservlet(http://<<report server name>>:7777/reports/rwservlet). i gave the destype as localFile. but in screen displays a msg : "Oracle Job Status" as some number. i cannot able to trace what is the reason for this problem. If any one knows to generate reports and store that in client side using rwservlet, let me know. i badly require solution for this. Thanks in advance.
regards,
srini

Hi,
The job status is to indicate the process of the job, it was run ok you can go to the location specified in the URL to look for the report. I assume that you also have a report's name in the URL too.
The problrm is it cannot save to the local machine. IF you specified a location that is not on the server then you would have gotten an error saying that the device is not ready, cannot send output... If you specified a drive that is similar to the server then the output went to the server, for example, you put c:\ then the report went to C:\ on the server, or if you put c:\mydir but that directory does not exist on the server then you would have gotten the error.
All above applies to running the report outside the form and in the 9i environment, using the browser and providing the URL. Now, in the URL, for IE only, if you don't add &desname=.... part then YOU WILL GET THE SAVE AS DIALOG then you CAN SAVE to the local machine. The problem is if you save it as a PDF file then you won't be able to open it (you will see an error), somehow it did not close the file at the end of the save properly; if you save it as a RTF file then you can open it with any text editor just that the layout is messed up.
Now, if calling from the form the report will go the location on the server as before, but it also brings up on the screen and you can save it locally using the SAVE button of the editor.
Below is my url when running from browser:
http://igoracledba:7777/reports/rwservlet?report=f:\9ifiles\sirc_case_report.rep&userid=hotline/hotline@desgnr9i&server=report9i&destype=localfile&desformat=pdf&desname=c:\myreport.pdf -- will save to c:\ on server (this is also used in the WEB.SHOW_DOCUMENT in the form).
http://igoracledba:8888/reports/rwservlet?report=f:\9ifiles\sirc_case_report.rep&userid=hotline/hotline@desgnr9i&server=report9i&destype=localfile&desformat=pdf -- will get the Save dialog
And that's what I 've been getting my project during the testing of the 9iDS suites.
Good luck.

Similar Messages

Can I create report in anyway without using reporting studio client

Hi All,
I am using hyperion 11.1.1.1.0.0.
I am creating reports from hyperion reporting and anlysis.
I want to know, is there anyway of creating reports from workspace?
If not then how can I create reports without accessing report studio client.
Thanks

In 9.3.1 (at least) you have to use the FR Studio, I'm pretty sure it's the same in 11.
What happens in the workspace if you select from the Hyperion/Oracle menu:
File/New/Document
In 9.3.1 there are options for:
- Interactive Reporting
- Web Analysis
- Report Books
- Batches

Excel output of report on client machine

excel output report on client machine
hello
i am running report from app server, output is excel file...
using following URL
web.show_document(rpt_url ||'&report='||rpt_path||'batch_idcards_print_excel.rdf&desformat=spreadsheet&destype=file&desname=c:\batch.xls','_blank');
----this stores the excel file at app server under c:\
now i want to save it on client machine... how can i do that ?
from one forum, i got help , so i changed URL as below
web.show_document(rpt_url ||'&report='||rpt_path||'batch_idcards_print_excel.rdf&desformat=spreadsheet&mimetype=application/msexcel&destype=FILE&title=batch.xls','_blank');
when i open report, no window opens for saving file...a new window opens and gets closed itself immediately...
wht is the problem?... client machine having MS office excel 2003...

Dear
Could you, please, tell us what you've done to solve this issue? We're facing the same problem, and until now we couldn't figure out what is exactly happening.
Thanks in advance for any help.

Report destype=localfile problem

Hi everybody,
I have the following problem:
When I execute a report in the browser like this:
http://myserver/reports/rwservlet?report=prueba.rdf&userid=a/b@c&destype=file&desformat=pdf&desname=myfile.pdf
everything goes well and the file "myfile.pdf" is generated in "myserver".
When trying to get the file in the client executing like this:
http://myserver/reports/rwservlet?report=prueba.rdf&userid=a/b@c&destype=localfile&desformat=pdf&desname=myfile.pdf
the report finishes well, as indicated in the server's queue, but the file doesn't appear in the client or in the server.
Is there anything I am doing wrong?
Just in case you give me an answer to the problem, if I submit the report from the BBDD, via the SRW package, is the server in which the BBDD the client?
Thanks in advance,

Hi Rodolfo.
First of all thank you for your answer.
Maybe it depends on the version you are working with. I work with Reports Builder 10.
If you look at the Destype System Parameter there are 7 options: screen, file, printer, mail, sysout, cache and localfile.
In the "Help" says for DESTYPE=LOCALFILE:
Valid only for rwservlet, rwclient, and rwcgi. Sends the output to a file on the client machine and forces a synchronous call.
And that is my case because I am using rwservlet.

How to setup in-process report server 11g on linux for destype=printer

Currently, I'm facing following error when send RDF report directly on printer with destype=printer using run_report_object built-in
REP-50159: The report generated successfully but distribution to destinations failed.
REP-50157: Destination ID TESTREP failed with error An error occurred while sending the file to printer \\hostname\printername. Exit with error code 1..
When i check on report server cache PDF file is generated /wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf but job not go to printer as mention in trace rwlpr.trc file output below.
Note: rwlpr.trc file generated by following 268295.1
==============================================================
XAUTHORITY=/tmp/.gdmT93JDW
_=/usr/bin/env
Parameters : -P "\\askit\PRN01F8" -#1 "/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf"
+ '[' '!' 4 -gt 0 ']'
+ '[' -P = -help ']'
++ uname -s
+ '[' Linux = HP-UX ']'
+ PRNCMDS='lpr lp'
+ for CMD in '$PRNCMDS'
++ which lpr
++ grep lpr
+ PRNCMDPATH=/usr/bin/lpr
+ '[' '!' -x /usr/bin/lpr ']'
+ '[' -x /usr/bin/lpr ']'
++ basename /usr/bin/lpr
+ '[' lpr = lpr ']'
++ uname -s
+ '[' Linux = Linux ']'
++ echo -P '"\\askit\PRN01F8"' -#1 '"/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf"'
++ tr -d '"'
+ /usr/bin/lpr -P '\\askit\PRN01F8' -#1 '/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf'
/usr/bin/lpr: The printer or class was not found.
+ exit 1
=============================================================
I didn't do any configuration in Enterprise Manager for Printer Configuration. Is this the reason? Is any thing I missed out?
Environment Setup:
Server Side:
Oracle Linux 5 (No printer is setup)
Oracle Weblogic Server 10.3.6
Oracle FMW Forms and Report 11.1.2
Configure: In-Process Report Server
Client Side:
Window 7
Printer: Default network printer set with client
Best Regards,
Fani

Hi,
the first thing you need to check is if you are able to print from the OS using the same lpr command that reports is using and using the printer queue being used when you submitted the report request.
Try to print any file from command line using lpr and your print queue \\askit\PRN01F8. If this does not work then that needs to be fixed from the OS standpoint before running report to printer.
Hope it helps
Regards, RZ

Not yet solve....TAX Report regarding (client)question

Client asked to me in interview, please give me answer
This is regarding US PAYROLL
1 Transaction PU19 Reports for tax reporting/Tax Returns / Files for State Unemployment Reporting on CD or Diskette :-
We have issues on some reports regarding address, page numbers and totals. Alex worked on it and told that we need to contact SAP         for help as he thinks problem is with SAP Forms itself. Currently typing manual returns pending changes to forms.
2 Deposits on 941 form:-
   Can we update the form to include tax deposits made on the 941 line for deposits?
3 State Tax Returns not configured in SAP:-
   Can we have state tax returns configured in the PDF format also?
4 Printing of W-2:-
Need to be able to print W-2s so we can fold/seal so address apprears on outside for mailing. Duplex or 11/14 form? Our folder/sealer uses pressure seal self sealing forms.
5 Documentation of Processes (Benefit and Garnishment):-
6 Configure benefit changes for 2009:-
7 Update benefit tables / rates for 2009:-
8 'Update SUT rates for new year:-
9 New 401k Limits Entered :-
Documentation how to do this
10 W-2 Reporting, Non Taxable Relocation, Personal Use of Company car (Box 12 and 14 items) for W-2 Reporting:-
11 Deceased Employee Payments:-
How do we handle so W-2 is correct and any 1099 items handled correctly
12 'Mag Media File - Federal (annual):-
'RS record missing from Magnetic Media file. Can this be included in the Federal Mag Media file? Kathy has sent some changes that need to be made to Frank.
13 'State Mag Media Files and State annual returns:-
Have some states that we must file by diskette file. Can we also have annual state tax returns configured in the PDF format?
14 Federal 940 Return:-
Make sure this form is configured correctly
15 Pension Plan Indicator box on W-2:-
Tested and is not showing on the W-2 or in the Mag Media file
16 Third Party Sick Pay indicator box on W-2:-
Tested and is not showing on the W-2 or in the Mag Media file
17 Retirement Calculation:-
18 Year end close procedure:-
What all has to be done before we can close the year and print W-2's. Do we have to do any zeroing of wages, taxes and deductions before the first check of the new year can happen?
19 Sort order for W-2 printing:-
20 941 Correction Form (941C):-
Need training on how this is handled
21 'W-2 correction form (W-2C):-
Need training on how this is handled
22 'Payments received in January that affect prior year W-2:-
'How do we handle. We receive info in January that must be included on the prior year W-2. Want to be able to include on original W-2 without filing a W-2C. (Third Party Sick Pay, Payments made in Mexico, Germany, etc) Usually don't receive.
Regards

Aswin,
The client session is your primary TopLink interface abstracting over the shared cache and connection pooling. Depending if you are using internal or external connection pooling and the transaction state you are in TopLink may have a JDBC connection allocated to your client session. A client session does equate to a single dedicated JDBC connection for its entire lifecycle.
Assuming you are using an external connection pool (Application server's data source) your client session will have a connection from this data source when required to perform a read and during the commit of its UnitOfWork.
Doug

Access denied report App\Client SDK

Server crashed, therefore I reinstalled Crystal Reports 9 & Crystal Enterprise 9 and attempting to rebuild the ASP pages which pass report parameters. The error received is:
Technical Information (for support personnel)
Error Type:
webReporting.dll (0x80004005)
Access denied. Please check directory setting for files you can access.
/HTMLViewers/reportgenerator.asp, line 31
Browser Type:
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 2.0.50727)
Page:
GET /HTMLViewers/reportgenerator.asp
Line 31 on the page reads:
.processHttpRequest Request, Response, Session
Running the registry moniter I receive an access Denied for hklm\software\Crystal Decisions\9.0\report App\client SDK
This is my first time on the forum, hope I explained myself properly.

Thanks Shaun, I appreciate your link for the process monitor application. This replaces my older seperate reg mon & file mon apps.
I have now been able to determine that my application is getting to where it is calling the cachemanager.dll and it is experiencing the problem. I tried manually registering this dll and receive the error Loadlibrary("cachemanager.dll")failed. GetLastError Returns 0x00000007e.
If I change the ASP pages to a very simple process, it will run the demo report, and my report. Once I attempt to use the ASP page with the login requesst, and parameter call I receive this error.
Error Type:
webReporting.dll (0x80004005)
The system cannot find the path specified.
/HTMLViewers/reportgenerator.asp, line 31
Browser Type:
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 2.0.50727)
Page:
GET /HTMLViewers/reportgenerator.asp
The reportgenerator ASP page which is causing this error is:
trace.write(category,message)
trace.warn(category,message)
<%@ Language="VBScript"%>
<%
'Declare variables for the report viewer and the ObjectFactory objects, and create the ObjectFactory object.
Dim ObjectFactory, userName, password
dim clientid
dim reportid
clientid = request.querystring("Clientid")
session("Clientid") = clientid
reportid = request.querystring("reportid")
' open a report
' copy this report to "Report Directory" in RAS Configuration Manager
Session("ReportName") = "C:\Program Files\Crystal Decisions\Report Application Server 9\Reports\logonparm\" & reportid
userName = "SYSDBA"
password = "masterkey"
'Create the ObjectFactory for use in creating other Crystal Objects
Set ObjectFactory=CreateObject("CrystalReports.ObjectFactory.2")
'Instantiate the Server Control object which allows us to collect information about the required
'inputs to run the report
Set ServerControl = ObjectFactory.CreateObject("CrystalReports.CrystalReportServerControl")
With ServerControl
   .ReportSource = Session("ReportName")
   .EnableLogonPrompt = False     ' Set this to false so that we can override the controls prompting for logon
   .processHttpRequest Request, Response, Session
End With
Set Session("ReportParameters") = ServerControl.ParameterFields
' Set Login info for all connections
' ***************** Added to logon using Viewer SDK *****************************
Set connectionInfos = serverControl.databaseLogonInfos
For x=0 To connectionInfos.count - 1
     Set connInfo = connectionInfos.Item(x)
    connInfo.UserName = CStr(username)
     connInfo.Password = CStr(password)
Next
For each parameter in Session("ReportParameters")
          Set parameterField = parameter
          paramName = parameterField.Name
          if paramName = "INTERFACE ID" then
               Dim paramValue
               Set paramValue = ObjectFactory.CreateObject("CrystalReports.ParameterFieldDiscreteValue")
               paramValue.Value = session("Clientid")
               parameterField.CurrentValues.RemoveAll
               ' Add this value to current value list
               parameterField.CurrentValues.Add paramValue
          end if
Next
Set clientDoc = CreateObject("CrystalClientDoc.ReportClientDocument")
clientDoc.Open session("ReportName")
set session("oclientdoc")=clientdoc
Session("pathReport") = pathReport
Set Session("connectionInfos") = connectionInfos
Response.Redirect "Viewer.asp"
%>
My appologies if I do not explain my problem well. I am not an ASP programmer, and am desperatly looking for assistance to resolve this problem. If anyone can refer a contract programmer that would be interested and capable of assisting me, that would be appreciated. I believe I am close to resolving this problem. I purchased a support session only to find out that this version is no longer supported.

How to print report on client default printer ?

I develop web application. I use jdev 10.1.3.4.0 . I can print report in PDF format.
My Problem
I can't print report on client default printer. when Client run application and print. Report is printed at server default printer
How can I do.
_My source code for print to PDF format._
FacesContext context = FacesContext.getCurrentInstance();
response = (HttpServletResponse)context.getExternalContext().getResponse();
String urlSchema = "jdbc:oracle:thin:@localhost:1521:ORCL";
String schemaName = "hr";
String schemaPass = "hr;
reportPath = "D:\\Project\\Reports";
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection(urlSchema, schemaName, schemaPass);
reportPath = reportPath.endsWith("\\") ? reportPath : (reportPath + "\\");
input = new File(reportPath + reportName + ".jasper");
reportParameters.put("SUBREPORT_DIR", reportPath);
reportParameters.put("P_IMAGE_PATH", reportPath);
jasperPrint = JasperFillManager.fillReport(input.getPath(), reportParameters, conn);
response.setContentType("application/pdf");
response.addHeader("Content-Disposition", "attachment;filename=" + reportNameOutput + ".pdf");
OutputStream outputStream = response.getOutputStream();
JasperExportManager.exportReportToPdfStream(jasperPrint, outputStream);
outputStream.flush();
outputStream.close();
conn.close();{code}
_My source code for print to *printer*._
{code}FacesContext context = FacesContext.getCurrentInstance();
response = (HttpServletResponse)context.getExternalContext().getResponse();
String urlSchema = "jdbc:oracle:thin:@localhost:1521:ORCL";
String schemaName = "hr";
String schemaPass = "hr;
reportPath = "D:\\Project\\Reports";
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection(urlSchema, schemaName, schemaPass);
reportPath = reportPath.endsWith("\\") ? reportPath : (reportPath + "\\");
input = new File(reportPath + reportName + ".jasper");
reportParameters.put("SUBREPORT_DIR", reportPath);
reportParameters.put("P_IMAGE_PATH", reportPath);
jasperPrint = JasperFillManager.fillReport(input.getPath(), reportParameters, conn);
JasperPrintManager.printReport(jasperPrint, false);
conn.close();Edited by: jaae251 on Jun 18, 2009 2:29 AM

If you offer a PDF to the end user, they usually know what to do with it. OTOH, if you wish to provide software to facilitate the local printing, you might launch an application on the client side that accesses the JNLP API's PrintService - that can be done in a sandboxed application.
A signed application might access the normal J2SE based print services. Though I heard that Sun had decided to make printing a 'prompt on first attempt' deal - even for sandboxed apps., from 1.5 plus (or was it 1.6 plus?).
It would be a serious security bug if a web site could print on the client printer, without trust or active involvement from the end user.

Print report from client machine without showing in screen

Hi guys!!
I m using (forms10g+ 10gAS). I want to Print report from client machine without showing in the screen/monitor.
Currently I m generating report in pdf format. From the pdf I m printing the document.
But my requirements is to print directly to the printer without showing preview
Thanks in advance
Mokarem

Maybe this will help:
http://forums.oracle.com/forums/thread.jspa?messageID=1209371&#1209371
Gary

Print Reports on Client Default Printer

Hi All,
I am using Oracle Reports 11g Release 2 (11.1.2.2.0).
I want to print oracle reports from ADF which is JEE base framework on client default printer. I am send just plane url to generate report to report server. In Oracle forms we have option to get job id of report, but in plain url i am not seeing any thing like that. In forms in am generating PDF wait untill job is finished and then send pdf to client printer by using job id.
How it will be possible by using plain URL send to report server or any other idea to achieve this task.
Thanks in advance.

If you offer a PDF to the end user, they usually know what to do with it. OTOH, if you wish to provide software to facilitate the local printing, you might launch an application on the client side that accesses the JNLP API's PrintService - that can be done in a sandboxed application.
A signed application might access the normal J2SE based print services. Though I heard that Sun had decided to make printing a 'prompt on first attempt' deal - even for sandboxed apps., from 1.5 plus (or was it 1.6 plus?).
It would be a serious security bug if a web site could print on the client printer, without trust or active involvement from the end user.

Error Loding Crystal Report in Client Machine

I have developed a windows application using vs2010 c# and also generated crystal report using the application.The problem is I
am able to view report on my computer but when the same application runs on a client machine its throwing an error "could not load file or assembly crystaldecisions.windows.forms version 13.0".I am not able to load the report on client machine.What
could be the possible reasons for the error.Any suggestions would be of great help? Thanks in advance

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Saving PDF report on Client machine

Dear All,
I have one form where the user can select the path he want to save PDF report (generated by Report Bulder) to (I am using Webutil). I set that path as DESFORMAT before calling the repot but when the report is run, it is saved on server (Application server) if the same path exists on server (e.g; c:\temp), otherwise it gives error.
How i can do this?
Regards

Hello,
I would guess that all the pdf files you are generating in AS in c:\temp directory. Otherwise if files are in c:\temp\data then you will have to change in the webutil.cfg file. So, according to your webutil.cfg file the function call can be like this..
lResult := WEBUTIL_FILE_TRANSFER.AS_TO_CLIENT_WITH_PROGRESS
               ('C:\TEMP\ABC.TXT',
                'C:\TEMP\ABC.TXT',
                'TITLE',
                'PLEASE WAIT...');Or otherwise if the files are in C:\TEMP\DATA then change the config setting to the below and try the function as below...
transfer.database.enabled=TRUE
transfer.appsrv.enabled=TRUE
transfer.appsrv.workAreaRoot=
transfer.appsrv.accessControl=TRUE
transfer.appsrv.read.1=c:\temp\data
transfer.appsrv.write.1=c:\temp\dataAnd function like this...
lResult := WEBUTIL_FILE_TRANSFER.AS_TO_CLIENT_WITH_PROGRESS
               ('C:\TEMP\data'ABC.TXT',
                'C:\TEMP\ABC.TXT',
                'TITLE',
                'PLEASE WAIT...');Make sure that file is readable on the AS and the directory C:\TEMP is available on the client side.
Using example you can find in webutil demo. Check the below link.
http://www.oracle.com/technology/products/forms/htdocs/webutil/webutil.htm
-Ammad

How to open a file created at the server through form/report at client end

How to open a file created at the server through form/report at client end
Dear Sir/Madame,
I am creating a exception report at the server-end using utl file utility. I want to display this report at the client end. A user doesn't have any access to server. Will u please write me the solution and oblige me.
Thanks
Rajesh Jain

One way of doing this is to write a PL/SQL procedure that uses UTL_FILE to read the file and DBMS_OUTPUT to display the contents to the users.
Cheers, APC

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

Generating a report for clients that are not registered

Hi - Hopefully someone can assist. We are looking to generate a report in SCCM 2012 that will tell us if a client is properly registered, and most recent scan.
I can't seem to find a generic report for this task, so does anyone know if one exists - or how to create a custom one?
Thanks!

what means "properly registered" in your eyes? To me, if it was able to communicate at all--heartbeat; that means it had to have registered. But maybe you have a different criterion.
So I think what you want is simply something like...
select s.Netbios_Name0, max(disc.AgentTime) as LastHeartbeat
from v_r_system s
left join v_agentDiscoveries disc on s.resourceid=disc.resourceid
and disc.AgentName = 'Heartbeat Discovery'
Group by s.Netbios_Name0
order by LastHeartbeat desc
where the most recent heartbeat at the top; and boxes with no heartbeat reported will be null at the bottom. If you don't want to even "see" the boxes that have never reported a heartbeat successfully, then don't left join, use just Join
You could also use v_r_system_valid, instead of v_r_system. As you can tell by the name, _valid means that CM itself has determined those are valid clients; so that might be what you think of as "properly registered".
It all boils down to what means "properly registered" to you, and what you mean by "recent scan". is a recent scan a heartbeat? a software update scan? hardware inventory reported? and what means "recent". the sample above is
reporting on anything and everything regardless of date.
As for default reports, you're saying that the default reports in "Client Status" don't fit your criteria?
Standardize. Simplify. Automate.

Store reports in client m/c using destype=localFile in rwservlet

Similar Messages

Maybe you are looking for