Store the Printing Metadata for each picture

2) Can Lightroom store print metadata (font size/color, scaling factor) for each picture and for each virtual copy the way it already stores Vibrance, virtual copies, tone curves, etc. information?
Suppose Photo1 and Photo2 have widely different title lengths (6 letters and 20 letters, respectively). Then I print Photo1 then Photo2 then Photo1 again.
Right now I have to retype the title for Photo1 and re-scale the title letters for Photo1 to make them look the same size as the first time printing Photo1, even though I printed Photo1 already.
I print almost all of my photos with titles and often cannot know which photo I'll print next. This is a real time-waster and not having to do this each time would be a huge timesaver!
Thanks!
Robert

Thanks, Ian.
That is do-able for a small number of pictures but I title hundreds of pictures and it would be much better since LR has a nice database to automatically store that metadata.
An analogy in the Develop module is that users don't have to fill in a template to hold all their Develop metadata from session to session e.g., Recovery = 50, Fill = 10, Vibrance = 30, etc. because that would make LR's workflow far too cumbersome for 100s or 1000s of pictures. The same should be true for LR saving Print metadata.
Thanks again,
Robert

Similar Messages

  • Which table/view stores the Driver values for each project

    Hi,
    I want to report on projects and drivers and the rating (Extreme, Moderate, low etc.) that have been assigned to each project.  I cannot seem to local the correct table/view.  I found the driver table and analysis tables but not one that has
    a project and ratings.
    What is the table / view?
    Regards Andrew
    Andrew Payze

    Hi Andrew,
    That would be the MSP_Project_Impact_values in the published schema.
    Please note that querying this particular schema is not supported.
    Hope this helps
    Paul

  • Need to get the exact time of each picture that I saved ( maybe as a excel sheet or word )

    Hi guys,
    I am actually a new labview user. I have successfullly been able to save pictures. But unfortunately I got two problems. The first one is that I need to use two cameras at the same time. The program I have so far is for one camera. The second problem is that I need to get the exact time for each picture saved in the profile.
    I would appreciate if someone can help me with that. Anyway plz find attached the subvi.
    Regards,
    Abbas
    Attachments:
    Abbas progress.vi ‏54 KB

    Hi Abbas,
    First, I notice that you are using IMAQ for USB.  Is there any particular reason you are not using IMAQdx?  This is the newer, supported driver for use with USB cameras that supports acquiring from multiple cameras at the same time. 
    Check these two articles:
    Can I Acquire from Multiple USB Cameras Simultaneously Using IMAQdx?
    Can I Acquire from Two USB Cameras Simultaneously with NI-IMAQ for USB Cameras 1.0?
    And also this example (if you camera does not support acquiring from multiple cameras at the same time):
    Toggle Between Multiple USB Cameras
    As for timestamps, some cameras output them with the frame timing.  However, usually this is not a feature of USB cameras; if it is not, you can look into timing options within LabVIEW.  Try playing with the property node for IMAQdx and the Acquisition Attributes.
    Cheers,
    Marti C
    Applications Engineer
    National Instruments
    NI Medical

  • How to print the out put for each customer in table

    Dear SDN Team Members!
    I've created a report and the output is displayed on the smartform for the same.
    In this report, I've selected a list of  customers and the report has to print the list of transactions being made by each customer in Smartform. 
    These details must be printed seperately for each customer. 
    I'm thinking of control statement AT NEW & AT END.  But i don't know how to use them exactly so that the output is displayed seperately for each customer in the Smartform.
    Please provide syntax and points will be awarded for.
    Best Regards!

    Hi Krsihna,
      Its simple.
    call function 'SSF_FUNCTION_MODULE_NAME'
    exporting formname = '<form name>'
    importing FM_NAME = lv_func_name.
    loop at itab.
    at new customer.  "customer must be the fisrt field in the itab and itab mus be sorted by customer.
    call function lv_func_name
    endat.
    endloop.
    Regards,
    Ravi

  • When printing labels for each printed label a blank label comes out of the printer

    Hello Experts
    We have a CR report which is designed to prints labels for the items using a label printer. After an upgrade that we have last month the settings for this report are missing so the labels were coming out wrong.
    Due to this I have had to reconfigure this report and its printing preferences and so far I have managed to make the prints fit in each label. But the problem is that if I try to print 5 copies of a label, the 5 labels come out of the printer just fine, butt after it another 5 blank labels come out of the printer too.
    I have tried with all parameters in "Printing preferences", mainly in the "Material" tab but nothing works.
    Thanks in advance and regards

    Hi,
    Please check below SAP note and let me know your feedback:
    1043235 - Label/thermal printers are not supported by SAP Business
    One
    Thanks & Regards,
    Nagarajan

  • I need to save some pictures from iPhoto to a SDHC photo card for a digital frame and was wondering if there is a way to shrink or compress file size for each picture as I have already cropped the pictures? Thank you

    I need to save some pictures from iPhoto to a SDHC photo card for a digital frame and was wondering if there is a way to shrink or compress file size for each picture as I have already cropped the pictures? Thank you

    Yes, you do this when you export the images from the Library.
    File -> Export
    in the Size section, you don't need images larger than the frame size, so you can specify that and in the Jpeg Quality you can select the amount of compression used.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

  • I have to reopen the scan program after each picture is saved.

    When I scan a picture using the HP Solution Center program, it forces me to Save and Finish after each scan and then I have to open Solution Center program all over for each picture.  The older version allowed me to scan and save a picture but left new scan window open to preview and scan the next picture placed on the flatbed.  How do I scan multiple pictures, each with its own file name, without having to restart the program for each and ever picture. The solution center run on a laptop that still has Vista on it will allow the multiple scans. The same program run under Windows 7 does not.

    Hello again Multiscanner,
    I have located two documents that I think may help with the issue at hand.
    Please click the following links for The Product Does Not Function Correctly After Reinstalling on a Network and Upgrading from Windows V...
    The second link is for Resolving HP Solution Center Scan and printer Status Issues After Upgrading From Windows Vista to W....
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thank you once again for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Why do i need to buy the same app for each device over and over again??

    why do i need to buy the same app for each device over and over again??
    and why cant i just pay for the app ones for all devices as long at it is with the same account??
    i hate that i have to oay for the same game or app three time one for ipad ones for iphone and ones for mac please do something about that apple..!!!

    First, you posted in the Mac App Store forum which are apps for the Mac OS X, not iOS devices.
    You do not need to re purchase your apps. Connect your iOS devices to your computer, launch iTunes. From the menu bar click Apps then click Sync
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Can I plot 2 locations at the same time for each record in a table

    I'm trying to plot 2 Locations (2 points on a Power View Map) at the same time for each record/project in a table
    I can plot 1 location for each project of course with no problem
    but I'm trying to show the Begin Point and the
    End Point for each project at the same time
    Is this even possible?

    First of all THANKS this worked!
    But now I stumbled on another issue. So I actually have 3 tables (and I've adopted them to the file you sent)
    Table 1 => TripData
    Trip
    LongLat
    Location
    Type
    TypeCode
    Size
    NW Tour
    47.568077, -122.320800
    Seattle, WA
    Begin
    0
    1
    NW Tour
    47.035608,   -122.884812
    Olympia,   WA
    End
    1
    1
    Cali Trip
    37.808848, -122.412580
    San Francisco, CA
    Begin
    0
    1
    Cali Trip
    32.682611, -117.178348
    San Diego, CA
    End
    1
    1
    Table 2 =>
    TripInfo
    Trip
    OneLongLat
    NTP
    NW Tour
    47.568077, -122.320800
    1/1/2015
    Cali Trip
    37.808848, -122.412580
    1/5/2015
    Table 3 =>
    ALLTrips
    Trip
    Stop
    Owner
    NW Tour
    1
    Owner1
    NW Tour
    2
    Owner2
    NW Tour
    3
    Owner3
    NW Tour
    4
    Owner4
    NW Tour
    5
    Owner5
    Cali Trip
    1
    Owner6
    Cali Trip
    2
    Owner7
    Cali Trip
    3
    Owner8
    Cali Trip
    4
    Owner9
    Cali Trip
    5
    Owner10
    Cali Trip
    6
    Owner11
    This is how the Diagram View looks like in PowerPivot
    Trip Data => Trip Info <= ALLTrips
    Since I don't know how to post pictures
    The MAP FIELDS are as follows
    SIZE - Count of Stop(s)
    LOCATIONS - OneLongLat followed by
    LongLat (drill down feature)
    COLOR - Trip
    The problem now happens with the drill down feature
    You can either plot OneLongLat which is the general location for each trip
    Or LongLat of each trip which shows the begin and end points
    But you can't use the drill down feature???
    If instead of OneLongLat you use a
    State Column it actually works!!!
    I wonder if it has to do with the fact that both locations used for the drill down are Long/Lat numbers???
    Any suggestions???
    And again Thanks for the response!

  • BCExeption: The IDOC metadata for null is not available in SID

    <h3>Hello Guys,</h3>
    we need some information about the error message:
    com.wm.pkg.sap.BCExeption: The IDOC metadata for null is not available in <SID>
    We use a Business Connector 4.8 and the backend is an ECC 6.0, we have an inbound xml scenario with FTP.
    We pick up the ORDRSP from the vendors ftp-server and we would like to drop it to our backend system.
    We can read the xml file into a string, but not send to the backend system, we use following steps:
    - bytesToString
    - stringToDocument
    - documentToRecord
    - recordToIDOC
    - lockSession
    - createTID
    so far works perfekt
    - sendIDoc
    - releaseSession
    On the step "sendIDoc" we see the described error message, but what is the message from the message?
    Any Ideas?
    Thank you and regards,
    Michael

    Hello Michal,
    thank you for your quick answer!
    In my opinion, i don't need any input for this service, because we pick up all data from the vendors ftp - server in a definied time interval.
    All needed fields are available in the xml file. In the result tab is the IDocList filled correct, but no sending to the backend system because the error is displayed.
    Is it a problem with my concept?
    Regards,
    Michael

  • How can i pull the payment transactions for each invoice?

    Hi folks
    iam developing report for following requirement.
    want to disply the vendor transaction file for all company codes Fiscal year,of 2004,2005,2006, and 2007 (to date).
    The purpose of oureport is to analyze our company invoices and investigate potential overpayment opportunities. In order to effectively accomplish this, we need a single invoice record for each invoice that was received by compnay from their vendors. The single invoice record would contain at least the following columns: Vendor Number, Vendor Invoice Number, Invoice Date, Invoice Amount, SAP Document Number, Check/Wire Number, Check/Wire Date, Check/Wire Amount. SAP would have multiple rows in a table for any one invoice, whereas we would only want to see ONE row for every vendor invoice.
    if you know that company pays (for example) 75,000 invoices/year - then the transaction file you would have about 300,000 records in it. 75,000 Invoices * 4 years.
    inodrer to develop this report iam using table PAYR -payee
    BSIK ( closed items) BSAK ( open items).
    my question is any one tell me how can write logic to  pull the payment transactions for each invoice?
    regards
    neeru

    Hi rob,
    yes you are right,  an invovice may contaion duplicate records
    example  PAYR table contain
    invice no         compnay code  checkno vendor  fisclyear
    ( doc.number)
    2000134373     001                    10287200          2007
    2000134373     001                    10427890          2007
    so as per my requirement how can i write the logic.
    regards
    neeru

  • How to use the different class for each screen as well as function.

    Hi Experts,
    How to use the different class for each screen as well as function.
    With BestRegards,
    M.Thippa Reddy.

    Hi ThippaReddy,
    see this sample code
    Public Class ClsMenInBlack
    #Region "Declarations"
        'Class objects
        'UI and Di objects
        Dim objForm As SAPbouiCOM.Form
        'Variables
        Dim strQuery As String
    #End Region
    #Region "Methods"
        Private Function GeRate() As Double
                Return Double
        End Function
    #End Region
    Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
            If pVal.BeforeAction = True Then
                If pVal.MenuUID = "ENV_Menu_MIB" Then
                End If
            Else ' Before Action False
                End If
        End Sub
    #End Region
    End Class
    End Class
    Rgds
    Micheal
    Vasu Anna Regional Feeling a???? Just Kidding
    Edited by: micheal willis on Jul 27, 2009 5:49 PM
    Edited by: micheal willis on Jul 27, 2009 5:50 PM

  • How to use the print option for photos?

    How to use the print option for photos.  I have a wireless printer but how do I set it up?

    http://www.apple.com/support/iphone/assistant/airprint/

  • How do i fix my printer when it won't show the print preview for web pages? it worked and now not.

    how do i fix my printer when it won't show the print preview for web pages?  it worked for a while and now it doesn't.  printer is an hp officejet 7310 all-in-one.

    I would suspect this is a hardware issue.  The rollers are probably having issues picking up the relatively smooth thick media.  You might have better results be cleaning the paper pickup rollers with a damp paper towel.  Also make sure the paper is snugly loaded and the paper guides have been correctly positioned.
    Regards,
    Bob Headrick, MS MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Getting the first row for each group

    Hi Everyone,
    I have a query which returns a number of rows, all of which are valid. What I need to do is to get the first row for each group and work with those records.
    For example ...
    client flight startairport destairport stops
    A fl123 LGW BKK 2
    A fl124 LHR BKK 5
    B fl432 LGW XYZ 7
    B fl432 MAN ABC 8
    .... etc.
    I would need to return one row for Client A and one row for Client B (etc.) but find that I can't use the MIN function because it would return the MIN value for each column (i.e. mix up the rows). I also can use the rownum=1 because this would only return one row rather than one row per group (i.e. per client).
    I have been investigating and most postings seem to say that it needs a second query to look up the first row for each grouping. This is a solution which would not really be practical because my query is already quite complex and incorporating duplicate subqueries would just make the whole thing much to cumbersome.
    So what I really new is a "MIN by group" or a "TOP by group" or a "ROWNUM=1 by group" function.
    Can anyone help me with this? I'm sure that there must be a command to handle this.
    Regards and any thanks,
    Alan Searle
    Cologne, Germany

    Something like this:
    select *
    from (
       select table1.*
       row_number() over (partition by col1, col2 order by col3, col4) rn
       from table1
    where rn = 1In the "partition by" clause you place what you normally would "group by".
    In the "order by" clause you define which will have row_number = 1.
    Edit:
    PS. The [url http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions004.htm#i81407]docs have more examples on using analytical functions ;-)
    Edited by: Kim Berg Hansen on Sep 16, 2011 10:46 AM

Maybe you are looking for