Stored Procedure CS4?

I use MS2008 SQL Server and I'm trying to get Dreamweaver to connect using stored procedures. ASP VBscript.
If I use "Command" and click on "Procedures" it starts to load them up and then sits there. I waited about 5 minutes and gave up waiting.
Same with doing it the Recordsets way. There was a time when doing the recordsets way worked but apparently not now in CS4. So not only has it not be fixed but it's gotten worse.
Any workarounds? Ideas?
Is this their way of saying I should move to php?
Are they EVER going to fix this and if not why do they keep it in the interface when they have no plan to fix it?

LArtJunky wrote: Glasonbury,
Are you setting up the lighting because you work for a lighting company? Also, where are you from? I was thinking you lived somewhat southwest of London.
Lighting is my hobby, I have been doing it for 10 years. Mainly clubs and free parties (raves) but also do a couple stages at the Glade Festival with some friends of mine. I do happen to work for a lighting company, have done for a couple of years, which is why its an ideal job for me. I do all the asp/sql parts of the website that marketing have overall control over. I also do internal systems using asp/sql. I think I have learnt more in the last 2 years than I have in the last decade, and all because the products and the company interest me.
Now Glastonbury is a good 3 hour drive in an old Merc van full of sound and lighting kit. Your right, I do live west of London, but do parties all over the place. This one wasn't that well attended or well paid, but it was still a good party.
Steve

Similar Messages

MySQL temp tables or Calling Stored procedures in CS4

I need to filter a result set by username before performing a LEFT JOIN and including OR IS NULL rows. The SQL works from from the mysqli client, by either creating a temp table using "create temporary table temp_appts select * from..." Or by creating a stored procedure which contains the same "create temp table" statement, then running my LEFT JOIN statement against the temp table.
I have tried both in CS4, it accepts the code in "code view" without errors but the page in a browser loads as a blank or a 500 error in IE. In my experience, this is caused by exiting before reaching the html header.
Is it possible to do either in CS4? Below is the code I am using.
$varU_temp_appts = "-1";
if (isset(<?php $_SESSION['MM_Username'])){
$varU_temp_appts =$_SESSION['MM_Username'];
mysql_select_db($database_ess, $ess);
$query_temp_appts = sprintf("CREATE TEMPORARY TABLE temp_appts SELECT * FROM appts WHERE username=%s", /GetSQLValueString($varU_temp_appts, "text"));
$temp_appts = mysql_query($query_temp_appts, $ess) or die(mysql_error());
$row_temp_appts = mysql_fetch_assoc($temp_appts);
$totalRows_temp_appts = mysql_num_rows($temp_appts);
mysql_select_db($database_ess, $ess);
$query_todays_appts = "SELECT * FROM appt_tm LEFT JOIN (temp_appts) ON appt_tm.appt_time=temp_appts.appt_hr WHERE(appt_date=CURDATE() OR appt_date IS NULL)";
$todays_appts = mysql_query($query_todays_appts, $ess) or die(mysql_error());
$row_todays_appts = mysql_fetch_assoc($todays_appts);
$totalRows_todays_appts = mysql_num_rows($todays_appts);
Any help is appreciated!

chuck8 wrote:
ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'appt_tm LEFT JOIN (temp_appts) ON appt_tm.appt_time=temp_appts.appt_hr where tem' at line 1
I'm no expert on joins, but I know there were changes in MySQL 5.0.12 that resulted in queries that had previously worked failing. Go to http://dev.mysql.com/doc/refman/5.0/en/join.html, and scroll down to the section labelled Join Processing Changes in MySQL 5.0.12.

CS4 won't expand Command (Stored Procedure) in Bindings window

Hi, I am having an annoying issue with DW CS4 and Stored
procedures
I have a created a command to run a stored procedure in our
MS Sql 2005 server. I can run it on the server under the
appropriate user. I can see the stored procedure in the DW CS4
command dialog box using the correct Schema, I can successfully
test the stored procedure in The DW CS4 command dialog box. But as
soon as i click on the + to expand it in the Bindings window it
gives the following error.
Could not find stored procedure
'greathage_database.rep_daily_orders_by_email'.
This is very strange as I can see it and run it in DW CS4
command dialog box.
Can anyone help?

I am having this same issue. I've recently upgraded from DW8 (where this functionality worked fine) to DW CS4. I can see the Command in the Bindings panel as well, however the only attribute or field available says 'Return Value' ... none of the fields from the Command are being returned. If I go into the command and check the box for return recordset and I give the recordset a name and click okay, things 'seem' okay.
However, I cannot seem to create an object such as a list box and bind the results of the command to the list box. DW CS4 does not seem to recognize the command I just created. In addition, if I go back into the same command form server behaviors, the check box for return recordset is no longer checked and the name I provided for the recordset is blanked out.
I've experienced this on existing pages and a pre-existing DW site that all worked in DW8. I tried opening a ticket with the Adobe support and they politely withdrew my ticket. They said they do not support the Server Behavior portion of thier product and that I had to try the 'developer section' to find support.

[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'dbo.sp_SPNAMEHERE'.

OK, something seemed to have changed with my system because this error is NEW. It might be related to my system upgrade from Vista to Win7, but just guessing here.
I run a database on a corporate MS Sql Server (2005) and an ASP application that connects via ODBC. The real world application works fine, however when I attempt to access Stored Procedures from Dreamweaver (on my development machine) I am getting the following error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'dbo.sp_SPNAMEHERE'.
This only seems to happen on Stored procedures that RETURN a recordset.
system:
Win7
Dreamweaver CS4
Code: VBScript/Classic ASP
SQL Server 2005
Connecting via ODBC: MM_MY_STRING = "Driver={SQL Server};Server=wscxxxxxxxxx;Database=dbsystem;Uid=username;Pwd=XXXXXXXXXXXX"
Stored procedures that do not return a recordset are not an issue.... this has put my development work at a standstill!!
Thanks in advance!

Well, I hate bumps, but I am really running out of solutions. I have now tried to use a system DSN on my development machine and that didnt solve the problem. I just un-installed DW and re-installed it and that didnt solve my problem either.
This is very frustrating, because I cannot use any stored procs that return recordsets... I am stuck... can anybody think of a relatively easy work-around to working in DW w/ recordsets that come from SPs when you cant actually access them?
The really weird thing is, when I build the command, and choose the stored proc, and give it valid input variables, and TEST it from the TEST button, everything works and data is returned as expected. Once I click "OK" and actually add it to the ASP page the recordset that should be visible isnt... and when I click the plus sign in the bindings window I get the error...
Help!!

Get variable values from a stored procedure

I am using SQL 2008R2 and I want to replace a view inside a stored procedure with a new stored procedure to return multiple variable values. Currently I am using the code below to get values for 4 different variables. I would rather get the 4 variables
from a stored procedure (which returns all of these 4 values and more) but not sure how to do so. Below is the code for getting the 4 variable values in my current sp.
DECLARE @TotalCarb real;
DECLARE @TotalPro real;
DECLARE @TotalFat real;
DECLARE @TotalLiquid real;
SELECT @TotalCarb = ISNULL(TotCarb,0),
@TotalPro = ISNULL(TotPro,0),
@TotalFat = ISNULL(TotFat,0),
@TotalLiquid = ISNULL(TotLiq,0)
FROM dbo.vw_ActualFoodTotals
WHERE (MealID = @MealID);

You can replace the view with inline table valued user-defined function:
http://www.sqlusa.com/bestpractices/training/scripts/userdefinedfunction/
See example: SQL create INLINE table-valued function like a parametrized view
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Pointbase : How can I create a stored procedure with Pointbase database?

Hello,
Excuse me for my english, I'm not anglophone. I try to create a stored procedure.
This is my file SampleExternalMethods.java :
import java.sql.*; //import com.pointbase.jdbc.jdbcInOutDoubleWrapper; public class SampleExternalMethods { // A connection object to allow database callback static Connection conn = null; static Statement l_stmt; static Statement m_stmt; static CallableStatement m_callStmt = null; static ResultSet l_rs = null; public static void main(String[] args) { try { String url = "jdbc:pointbase:server://localhost/pointbaseDB"; String username = "PBPUBLIC"; String password = "PBPUBLIC"; conn = DriverManager.getConnection(url, username, password); doCreateProcedure(); doInvokeProcedure(); } catch (SQLException e) { e.printStackTrace(); } finally { if (m_stmt != null) { try { m_stmt.close(); } catch (Exception e) { e.printStackTrace(); } } if (m_callStmt != null) { try { m_callStmt.close(); } catch (Exception e) { e.printStackTrace(); } } if (conn != null) { try { conn.close(); } catch (Exception e) { e.printStackTrace(); } } } } public static void getCountry(String Iso_Code) { try { // Query the database for the country iso code l_stmt = conn.createStatement(); l_rs = l_stmt.executeQuery( "SELECT * FROM countries" + " WHERE country_iso_code ='" + Iso_Code + "'"); //Affichage du résultat de la requête l_rs.next(); System.out.print(l_rs.getString(1) + " - "); System.out.print(l_rs.getString(2) + " - "); System.out.println(l_rs.getString(3)); // Close the result set l_rs.close(); } catch (SQLException e) { e.printStackTrace(); } finally { if (l_rs != null) { try { l_rs.close(); } catch (Exception e) { e.printStackTrace(); } } if (l_stmt != null) { try { l_stmt.close(); } catch (Exception e) { e.printStackTrace(); } } } } public static void doCreateProcedure() throws SQLException { // SQL statement to create a stored procedure String SQL_CREATE_PROC = "CREATE PROCEDURE getCountry(IN P1 VARCHAR(30))" + " LANGUAGE JAVA" + " SPECIFIC getCountry" + " NO SQL" + " EXTERNAL NAME \"SampleExternalMethods::getCountry\"" + " PARAMETER STYLE SQL"; // Create a SQL statement m_stmt = conn.createStatement(); // Execute the SQL m_stmt.executeUpdate(SQL_CREATE_PROC); // Close the statement //m_stmt.close(); } public static void doInvokeProcedure() throws SQLException { // Create SQL to invoke stored procedures String SQL_USE_PROC = "{ call getCountry(?) }"; // Create a callable statement with three binding parameters m_callStmt = conn.prepareCall(SQL_USE_PROC); m_callStmt.setString(1, "CA"); m_callStmt.executeQuery(); // Close the callable statement //m_callStmt.close(); } }
Afterwards, I have read this note in a Pointbase document:
To invoke the dateConvert external Java method from a stored function, you must use the
CREATE FUNCTION statement. The dateConvert external Java method is called from the
class, SampleExternalMethods.
In order for the database to access this external Java method, the class SampleExternalMethods
must be included in the database CLASSPATH. For PointBase Embedded - Server Option, it
must be in the Server CLASSPATH, but not in the Client CLASSPATH.
If PointBase Server is run with the Java Security Manager, in the java policy file grant
’com.pointbase.sp.spPermission’ to the class that implements the external Java method.
An "spPermission" consists of a class name with no action. The class name is a name of a class
that could be used in creating a Stored Procedure in PointBase. The naming convention follows
the hierarchical property naming convention and that is supported by
"java.security.BasicPermission". An asterisk may appear by itself, or if immediately preceded
by ".", may appear at the end of the name, to signify a wildcard match. The name cannot
contain any white spaces.
I'm not sure, but I suppose that I must include the class SampleExternalMethods in a .jar file.
The database CLASSPATH could be : C:\Sun\AppServer\pointbase\lib\
These my files in this database CLASSPATH:
pbclient.jar
pbembedded.jar
pbtools.jar
pbupgrade.jar
I have tryed to include the class SampleExternalMethods in pbclient.jar and pbembedded.jar with this command:
jar -uf pbembedded.jar SampleExternalMethods
Afterwards I do that,
1) Start Pointbase
2) Configuration of classpath
set classpath=C:\Sun\AppServer\pointbase\lib\pbclient.jar
set classpath=%classpath%;D:\J2EE\Ch07Code\Ch07_06
I precise that my file SampleExternalMethods is into D:\J2EE\Ch07Code\Ch07_06\Ch07.
Then, I run the program:
D:\J2EE\Ch07Code\Ch07_06>java -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver Ch07.SampleExternalMethods
But I have an error message:
Exception in thread "main" java.lang.NoClassDefFoundError: Ch07.SampleExternalMethods (wrong name: SampleExternalMethods)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.DefineClass(ClassLoader.java:539)
The problem, I suppose, comes from that the class SampleExternalMethods
must be included in the database CLASSPATH, but there is a pbserver.jar with pointbase normally, but I didn't find it. That's why I use pbembedded.jar or pbclient.jar in order to include the class SampleExternalMethods. May be I must start from C:\Sun\AppServer\pointbase\lib\ instead of D:\J2EE\Ch07Code\Ch07_06\Ch07?
Please, can somebody helps me?
Thank you in advance.
cagou!

jschell wrote:
And I doubt you can recurse like that for embedded java. You must have a class that does the functionality and another class that creates the proc.
>And I doubt you can recurse like that for embedded java. You must have a class that does the functionality and another class that creates the proc.
>
And I doubt you can recurse like that for embedded java. You must have a class that does the functionality and another class that creates the proc.
Thank you for your response, I have done two classes:
SampleExternalMethods.java:
package Ch07;
import java.sql.*;*
*public class SampleExternalMethods*
*public static void getCountry(String Iso_Code)*
*// A connection object to allow database callback*
*Connection l_conn = null;*
*Statement l_stmt = null;*
*ResultSet l_rs = null;*
*try*
*String url = "jdbc:pointbase:server://localhost/pointbaseDB";*
*String username = "PBPUBLIC";*
*String password = "PBPUBLIC";*
*l_conn = DriverManager.getConnection(url, username, password);*
*// Query the database for the country iso code*
*l_stmt = l_conn.createStatement();*
*l_rs = l_stmt.executeQuery( "SELECT* FROM PBPUBLIC.COUNTRIES"
+" WHERE country_iso_code ='"+ Iso_Code +"'");+
+//Affichage du résultat de la requête+
+l_rs.next();+
+System.out.print(l_rs.getString(1)+ " - ");
System.out.print(l_rs.getString(2) +" - ");+
+System.out.println(l_rs.getString(3));+
+// Close the result set+
+l_rs.close();+
+} catch (SQLException e) {+
+e.printStackTrace();+
+} finally {+
+if (l_rs != null) {+
+try {+
+l_rs.close();+
+} catch (Exception e) {+
+e.printStackTrace();+
+}+
+}+
+if (l_stmt != null) {+
+try {+
+l_stmt.close();+
+} catch (Exception e) {+
+e.printStackTrace();+
+}+
+}+
+if (l_conn != null) {+
+try {+
+l_conn.close();+
+} catch (Exception e) {+
+e.printStackTrace();+
+}+
+}+
+}+
+}+
+}+
CreateMethods.java:
+package Ch07;+
+import java.sql.*;+
+public class CreateMethods+
+{+
+// A connection object to allow database callback+
+static Connection m_conn = null;+
+static Statement m_stmt;+
+static CallableStatement m_callStmt = null;+
+public static void main(String[] args)+
+{+
+try+
+{+
+String url = "jdbc:pointbase:server://localhost/pointbaseDB";+
+String username = "PBPUBLIC";+
+String password = "PBPUBLIC";+
+m_conn = DriverManager.getConnection(url, username, password);+
+doCreateProcedure();+
+doInvokeProcedure();+
+} catch (SQLException e) {+
+e.printStackTrace();+
+} finally {+
+if (m_stmt != null) {+
+try {+
+m_stmt.close();+
+} catch (Exception e) {+
+e.printStackTrace();+
+}+
+}+
+if (m_callStmt != null) {+
+try {+
+m_callStmt.close();+
+} catch (Exception e) {+
+e.printStackTrace();+
+}+
+}+
+if (m_conn != null) {+
+try {+
+m_conn.close();+
+} catch (Exception e) {+
+e.printStackTrace();+
+}+
+}+
+}+
+}+
+public static void doCreateProcedure() throws SQLException {+
+// SQL statement to create a stored procedure+
+String SQL_CREATE_PROC = "CREATE PROCEDURE PBPUBLIC.getCountry(IN P1 VARCHAR(30))"+
" LANGUAGE JAVA"
+" SPECIFIC getCountry"+
" NO SQL"
+" EXTERNAL NAME \"SampleExternalMethods::getCountry\""+
" PARAMETER STYLE SQL";
// Create a SQL statement
m_stmt = m_conn.createStatement();
// Execute the SQL
m_stmt.executeUpdate(SQL_CREATE_PROC);
// Close the statement
//m_stmt.close();
public static void doInvokeProcedure() throws SQLException {
// Create SQL to invoke stored procedures
String SQL_USE_PROC = "{ call getCountry(?) }";
// Create a callable statement with three binding parameters
m_callStmt = m_conn.prepareCall(SQL_USE_PROC);
m_callStmt.setString(2, "CA");
m_callStmt.executeQuery();
// Close the callable statement
//m_callStmt.close();
}But I have the same error message that previously.
I have read this note and I suppose that the problem is linked:
If PointBase Server is run with the Java Security Manager, in the java policy file grant
*com.pointbase.sp.spPermission to the class that implements the external Java method.*
An "spPermission" consists of a class name with no action. The class name is a name of a class
that could be used in creating a Stored Procedure in PointBase. The naming convention follows
the hierarchical property naming convention and that is supported by
*"java.security.BasicPermission". An asterisk may appear by itself, or if immediately preceded*
by ".", may appear at the end of the name, to signify a wildcard match. The name cannot
contain any white spaces.
Can you explain me what I must to do in order to solve this problem of spPermission.
Thanks.

How to view the returned data from a stored procedure in TOAD?

Hi,
I created ref cursor in the stored procedure to return data. The stored procedure works fine, just want to view the result in TOAD. The BEGIN... EXEC... END can execute the stored procedure, but how to make the result display?
Thanks!

Right click the editor and choose
"Prompt For Substitution Variables".
Run for example the following code:
DECLARE
PROCEDURE p (cur OUT sys_refcursor)
AS
BEGIN
OPEN cur FOR
SELECT *
FROM DUAL;
END p;
BEGIN
p (:cur);
END;
The result will display in Toad's Data Grid!
Regards Michael

Error while running a stored procedure in SBO

Hi all,
i have a stored procedure that i run in my sbo. When i run the stored procedure i get the following error :
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Warning: Null value is eliminated by an aggregate or other SET operation.
'Servicecontracten' (OCTR)    05/10/2011 18:03:36 -1
i launch my sp like this :
exec [spu_DS_HistProjektUserVeldenViewBetalingen] (i pass no parameters while testing. i put them fix in my sp)
my stored procedure looks like this :
USE [def1]
GO
/****** Object: StoredProcedure [dbo].[spu_DS_HistProjektUserVeldenViewBetalingen]    Script Date: 10/05/2011 18:03:05 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- Batch submitted through debugger: SQLQuery2.sql|8|0|C:\Users\kvanhauwaert\AppData\Local\Temp\~vs2A98.sql
ALTER PROCEDURE [dbo].[spu_DS_HistProjektUserVeldenViewBetalingen]
          /* @project_number varchar(20),
          @billperiod_type varchar(10) */
AS
BEGIN
     SELECT isnull(lijnnr,0) as lijnnr, isnull(fase,'') as fase, isnull(factuurbedrag,0) as factuurbedrag,
     isnull(billperiod_type,'') as billperiod_type
     INTO #tempDS_HistProjektUserVeldenViewBetalingen
     FROM DS_HistProjektUserVeldenViewBetalingen t1
     WHERE project_number = '08053A'
     SELECT isnull(lijnnr,0) as lijnnr, isnull(fase,'') as fase , isnull(factuurbedrag,0) as factuurbedrag,
          (select sum(isnull(factuurbedrag,0)) from #tempDS_HistProjektUserVeldenViewBetalingen where lijnnr <= t1.lijnnr) as lijntotaal,
          (select sum(isnull(factuurbedrag,0)) from #tempDS_HistProjektUserVeldenViewBetalingen where lijnnr <= t1.lijnNr and billperiod_type = '110-01' ) as lijntotaalKetting
     FROM #tempDS_HistProjektUserVeldenViewBetalingen t1
     WHERE fase,'') is not null
     ORDER BY t1.fase
     DROP TABLE #tempDS_HistProjektUserVeldenViewBetalingen
END
GO
Somebody has a clue what i'm doing wrong ?
thnx

Thanks Gordon for your reply.
i've changed my sp to :
USE [def1]
GO
/****** Object: StoredProcedure [dbo].[spu_DS_HistProjektUserVeldenViewBetalingen]    Script Date: 10/05/2011 18:56:34 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- Batch submitted through debugger: SQLQuery2.sql|8|0|C:\Users\kvanhauwaert\AppData\Local\Temp\~vs2A98.sql
CREATE PROCEDURE [dbo].[spu_DS_HistProjektUserVeldenViewBetalingen]
          /* @project_number varchar(20),
          @billperiod_type varchar(10) */
AS
BEGIN
     SELECT isnull(lijnnr,0) as lijnnr, isnull(fase,'') as fase, isnull(factuurbedrag,0) as factuurbedrag,
     isnull(billperiod_type,'') as billperiod_type
     INTO #tempDS_HistProjektUserVeldenViewBetalingen
     FROM DS_HistProjektUserVeldenViewBetalingen t1
     WHERE isnull(project_number,'') = '08053A'
     SELECT isnull(lijnnr,0) as lijnnr, isnull(fase,'') as fase , isnull(factuurbedrag,0) as factuurbedrag,
          (select sum(isnull(factuurbedrag,0)) from #tempDS_HistProjektUserVeldenViewBetalingen where isnull(lijnnr,0) <= isnull(t1.lijnnr,0)) as lijntotaal,
          (select sum(isnull(factuurbedrag,0)) from #tempDS_HistProjektUserVeldenViewBetalingen where isnull(lijnnr,0) <= isnull(t1.lijnNr,0) and isnull(billperiod_type,'') = '110-01' ) as lijntotaalKetting
     FROM #tempDS_HistProjektUserVeldenViewBetalingen t1
     WHERE isnull(fase,'') <> ''
     ORDER BY t1.fase
     DROP TABLE #tempDS_HistProjektUserVeldenViewBetalingen
END
GO
but that didn't solved my problem. Any other idea's ?
kind regards.
Kurt

Error while deploying a Java Stored Procedure using JDeveloper

Hi,
I was going thru the Oracle By Example article: "Developing SQL and PL/SQL with JDeveloper". (http://www.oracle.com/technology/obe/obe9051jdev/ide1012/plsqlobe/obeplsql.htm)
One of the items in this article is - "Creating and Deploying a Java Stored Procedure"
I was able to create a java class, compile it. Created a deployment profile. created a pl/sql wrapper. While trying to deploy the java stored procedure, I am getting the following error:
Invoking loadjava on connection 'hr_conn' with arguments:
-order -resolve -thin
errors : class package1/mypackage/JavaStoredProc
ORA-29521: referenced name java/lang/StringBuilder could not be found
The following operations failed
class package1/mypackage/JavaStoredProc: resolution
oracle.aurora.server.tools.loadjava.ToolsException: Failures occurred during processing
     at oracle.aurora.server.tools.loadjava.LoadJava.process(LoadJava.java:863)
     at oracle.jdeveloper.deploy.tools.OracleLoadjava.deploy(OracleLoadjava.java:116)
     at oracle.jdeveloper.deploy.tools.OracleLoadjava.deploy(OracleLoadjava.java:46)
     at oracle.jdevimpl.deploy.OracleDeployer.deploy(OracleDeployer.java:97)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:474)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:361)
     at oracle.jdevimpl.deploy.StoredProcHandler.doDeploy(StoredProcHandler.java:285)
     at oracle.jdevimpl.deploy.StoredProcProfileDt$Action$1.run(StoredProcProfileDt.java:383)
#### Deployment incomplete. #### Oct 27, 2005 1:38:56 PM
Appreciate your help on this..

I am using Jdeveloper 10.1.3 Early Access Version. JDK comes with it. I also have another JDK on my machine (JDK1.4.2_09)

Error while executing a stored procedure from forms6i

When I execute a STORED PROCEDURE from ORACLE DB 10g this procedure works perfectly fine.
But when I execute the same from the FORMs 6i I get the following error:
PDE-PLU022 Don't have access to the stored program unit
XMLPARSERCOVER in schema CARE.
where XMLPARSERCOVER is the class and
CARE is the schema.
Regards,
Jignesh S

I have tried this with both the owner of the schema and the intended user, -from both forms and directly.
All rights was granted on the stored procedure. Since posting I have found that one of the tables that the procedure might insert into, was not explicitly granted to the intended user, and after rectifying that the error message went away.
-however, the procedure now silently "finishes" without any evidence that it ever ran, if invoked from the forms application. When invoked from SQL Plus (or JDev, or Toad) it runs as expected.
I have no public synonym for the procedure, -is that necessary?
The stored procedure in question is implemented in java, and published as a stored procedure. It does rather heavy lifting, when running, using a view against another server , updating local tables and quite a lot of data validation/cleansing, and logging. All recourses are within the same schema.
Any ideas?

Error while calling a stored procedure using SQLJ

I am calling a stored procedure defined inside a package through a SQLJ script. The first parameter of that procedure is a IN OUT parameter which is used as a ROWID for creating a cursor. That ROWID value is the same for every record in the table, thereby enabling us to create a cursor.
When I give a hard-coded value as a parameter, I get an error stating that the assignment is not correct as the query is expecting a variable and not a literal. Hence I removed the hard-coded value and included a dymanic value in the SQLJ call.
String strVal = "A";
#sql{CALL ASSIGNMENTS_PKG.INSERT_ROW :{strVal},'SALARY_CODE_GROUP','BU',3,105,sysdate,1,sysdate,1,1)};
Here "ASSIGNMENTS_PKG" is a package name and INSERT_ROW is the procedure.
When the SQLJ program is run, I get an error stating:
"PLS-00201: identifier 'A' must be declared"
I read the error message, but I am not able to understand where I need to give the GRANT permission to.

If you're using Oracle Provider for OLE DB (OraOLEDB) to execute this stored procedure, you need to set PLSQLRSet attribute. This attribute can be set in registry, connection string, or command object. Please refer to User Documentation for more information.

ORA-03111 - JCA Binding error while invoking a stored procedure in DB

Hi,
We are facing this problem for one interface alone.
Need expert advice to fix this problem..
This is scheduled to run once in a day and fails daily for past 2 weeks..
We receive below error as response..
Same interface worked fine for past 1 yr..
Also it works fine if we reprocess the batch in next day morning...
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DB_Legacy_To_EBS_Invoice_Conversion' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the IRSOA.AR_SOA_INVOICE.TRN_GET_CUST_INV_RAW_TO_STAGE API. An error occurred while preparing and executing the IRSOA.AR_SOA_INVOICE.TRN_GET_CUST_INV_RAW_TO_STAGE API. Cause: java.sql.SQLException: ORA-03111: break received on communication channel ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
AND
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DB_Legacy_To_EBS_Invoice_Conversion' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the IRSOA.AR_SOA_INVOICE.TRN_GET_CUST_INV_RAW_TO_STAGE API. An error occurred while preparing and executing the IRSOA.AR_SOA_INVOICE.TRN_GET_CUST_INV_RAW_TO_STAGE API. Cause: java.sql.SQLException: ORA-01013: user requested cancel of current operation ORA-06512: at "IRSOA.XXIR_AR_SOA_CUSTOMER_INVOICE", line 213 ORA-06512: at line 1 ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution
Thanks,
Sundaram

Looks like the SQL might be taking a longer time to execute and might be timing out.
Please refer the following:
Re: ORA-01013: user requested cancel of current operation
http://www.dba-oracle.com/t_ora_01013_user_requested_cancel_of_current_operation.htm
Additionally, ORA-06512 indicates that there is a mismatch of the with the data length that is being processed. Refer http://www.techonthenet.com/oracle/errors/ora06512.php
Hope this helps.
Thanks,
Patrick

I am getting ORA-01403: no data found error while calling a stored procedur

Hi, I have a stored procedure. When I execute it from Toad it is successfull.
But when I call that from my java function it gives me ORA-01403: no data found error -
My code is like this -
SELECT COUNT(*) INTO L_N_CNT FROM TLSI_SI_MAST WHERE UPPER(CUST_CD) =UPPER(R_V_CUST_CD) AND
UPPER(ACCT_CD)=UPPER(R_V_ACCT_CD) AND UPPER(CNSGE_CD)=UPPER(R_V_CNSGE_CD) AND
UPPER(FINALDEST_CD)=UPPER(R_V_FINALDEST_CD) AND     UPPER(TPT_TYPE)=UPPER(R_V_TPT_TYPE);
     IF L_N_CNT >0 THEN
          DBMS_OUTPUT.PUT_LINE('ERROR -DUPlicate SI-1');
          SP_SEL_ERR_MSG(5,R_V_ERROR_MSG);
          RETURN;
     ELSE
          DBMS_OUTPUT.PUT_LINE('BEFORE-INSERT');
          INSERT INTO TLSI_SI_MAST
               (     CUST_CD, ACCT_CD, CNSGE_CD, FINALDEST_CD, TPT_TYPE,
                    ACCT_NM, CUST_NM,CNSGE_NM, CNSGE_ADDR1, CNSGE_ADDR2,CNSGE_ADDR3,
                    CNSGE_ADDR4, CNSGE_ATTN, EFFECTIVE_DT, MAINT_DT,
                    POD_CD, DELVY_PL_CD, TRANSSHIP,PARTSHIPMT, FREIGHT,
                    PREPAID_BY, COLLECT_BY, BL_REMARK1, BL_REMARK2,
                    MCC_IND, NOMINATION, NOTIFY_P1_NM,NOTIFY_P1_ATTN , NOTIFY_P1_ADDR1,
                    NOTIFY_P1_ADDR2, NOTIFY_P1_ADDR3, NOTIFY_P1_ADDR4,NOTIFY_P2_NM,NOTIFY_P2_ATTN ,
                    NOTIFY_P2_ADDR1,NOTIFY_P2_ADDR2, NOTIFY_P2_ADDR3, NOTIFY_P2_ADDR4,
                    NOTIFY_P3_NM,NOTIFY_P3_ATTN , NOTIFY_P3_ADDR1,NOTIFY_P3_ADDR2, NOTIFY_P3_ADDR3,
                    NOTIFY_P3_ADDR4,CREATION_DT, ACCT_ATTN, SCC_IND, CREAT_BY, MAINT_BY
                    VALUES(     R_V_CUST_CD,R_V_ACCT_CD,R_V_CNSGE_CD,R_V_FINALDEST_CD,R_V_TPT_TYPE,
                    R_V_ACCT_NM,R_V_CUST_NM ,R_V_CNSGE_NM, R_V_CNSGE_ADDR1,R_V_CNSGE_ADDR2, R_V_CNSGE_ADDR3,
                    R_V_CNSGE_ADDR4,R_V_CNSGE_ATTN,     R_V_EFFECTIVE_DT ,SYSDATE, R_V_POD_CD,R_V_DELVY_PL_CD,R_V_TRANSSHIP ,R_V_PARTSHIPMT , R_V_FREIGHT,
                    R_V_PREPAID_BY ,R_V_COLLECT_BY ,R_V_BL_REMARK1 ,R_V_BL_REMARK2,R_V_MCC_IND,
                    R_V_NOMINATION,R_V_NOTIFY_P1_NM, R_V_NOTIFY_P1_ATTN, R_V_NOTIFY_P1_ADD1, R_V_NOTIFY_P1_ADD2,
                    R_V_NOTIFY_P1_ADD3, R_V_NOTIFY_P1_ADD4, R_V_NOTIFY_P2_NM, R_V_NOTIFY_P2_ATTN, R_V_NOTIFY_P2_ADD1,
                    R_V_NOTIFY_P2_ADD2, R_V_NOTIFY_P2_ADD3, R_V_NOTIFY_P2_ADD4, R_V_NOTIFY_P3_NM, R_V_NOTIFY_P3_ATTN,
                    R_V_NOTIFY_P3_ADD1, R_V_NOTIFY_P3_ADD2, R_V_NOTIFY_P3_ADD3, R_V_NOTIFY_P3_ADD4,
                    SYSDATE,R_V_ACCT_ATTN,R_V_SCC_IND,R_V_USER_ID,R_V_USER_ID
                    DBMS_OUTPUT.PUT_LINE(' SI - REC -INSERTED');
     END IF;

Hi,
I think there is a part of the stored procedure you did not displayed in your post. I think your issue is probably due to a parsed value from java. For example when calling a procedure from java and the data type from java is different than expected by the procedure the ORA-01403 could be encountered. Can you please show the exact construction of the call of the procedure from within java and also how the procedure possible is provided with an input parameter.
Regards, Gerwin

Error while calling a stored procedure with OUT parameter.

Hi,
I am trying to call a Stored Procedure(SP) with an OUT parameter(Ref Cursor) from a third party tool. It is called using OLE-DB Data provider. In one database the procedure works fine but when I change the database the procedure call is giving following error.
Distribution Object:     COM Error. COM Source: OraOLEDB. COM Error message: IDispatch error #3092. COM Description: ORA-06550: line 1, column 7:
     PLS-00306: wrong number or types of arguments in call to 'TEST1'
     ORA-06550: line 1, column 7:
     PL/SQL: Statement ignored.
I am not able to find as to why is this happening. Please let me know any clues /help to solve this problem.
Thanks in advance.

If you're using Oracle Provider for OLE DB (OraOLEDB) to execute this stored procedure, you need to set PLSQLRSet attribute. This attribute can be set in registry, connection string, or command object. Please refer to User Documentation for more information.

How to find out date in oracle when the Stored procedure in changed.

Dear Sir,
I want to know the list of dates when stored procedure is modified during a given period.
eg. Procedure created 01/01/2011
i changed the procedure 4 times say 01/10/2011,01/12/2011,01/01/2012 and 20/12/2012.
from where i can get these details along with the other details like what will be procedure syntax at different modifications and most important what is ipof machine.
thanks & regards
Munish

user9216770 wrote:
Dear Sir,
I want to know the list of dates when stored procedure is modified during a given period.
eg. Procedure created 01/01/2011
i changed the procedure 4 times say 01/10/2011,01/12/2011,01/01/2012 and 20/12/2012.
from where i can get these details along with the other details like what will be procedure syntax at different modifications and most important what is ipof machine.
thanks & regards
MunishOracle does NOT retain or contain previous versions.
You should be able to obtain these from your Source Code Repository; like Subversion.

Stored Procedure CS4?

Similar Messages

Maybe you are looking for