Stored procedure for checking Invoice value if more than R 15 000
Hi All
I have a problem with my stored procedure below, i want to check the doctotal if it above R 15 000 , if it is then it checks if the supplier has a tax clearance cert.
IF @transaction_type = 'A' AND @object_type = '22'
BEGIN
If exists (SELECT T0.cardcode, t0.docentry FROM OPOR T0 where T0.DOCTOTAL >'15,000.00' and T0.U_TAXCLEAR IS NULL AND T0.docentry=@list_of_cols_val_tab_del)
begin
SET @error = 10
SET @error_message = N'Amount is above R 15 000 please select Supplier with Valid Tax Certificate'
END
END
I tried this executing the sp and there was this error
Msg 208, Level 16, State 6, Procedure SBO_SP_TransactionNotification, Line 41
Invalid object name 'dbo.SBO_SP_TransactionNotification'.
In this case line 41 is 2nd END.
Thanks
Bongani Dlamini
Hi all
Thanks for the replies , forgot to mention a few requirements.
In addition to the to checking the value above R 15 000 I want to check if a tax certificate field is populated , if it is then checks if the expiry date is not null.
please check the query I tried below.
IF @transaction_type = 'A' AND @object_type = '22'
BEGIN
IF EXISTS (SELECT T0.CardCode FROM dbo.OPOR T0
WHERE T0.DOCTOTAL > 15000 AND T0.U_TAXCLEAR IS NULL AND T0.DocEntry=@list_of_cols_val_tab_del)
BEGIN
SET @error = 10
SET @error_message = 'Amount is above R 15 000, a valid Tax Certificate is required'
END
END
IF @transaction_type = 'A' AND @object_type = '22'
BEGIN
IF EXISTS (SELECT T0.CardCode FROM dbo.OPOR T0 WHERE T0.U_EXPIRYDATE IS NULL AND T0.DocEntry=@list_of_cols_val_tab_del)
BEGIN
SET @error = 10
SET @error_message = 'Tax Certificate expiry date is required'
END
END
Thanks
Bongani Dlamini
Similar Messages
-
Stored Procedure for checking Invoice Vendor ref No
Hi All
I need a sp for checking a vendor ref no on an invoice if it already exist in the system or the user forgot to include one when trying to add the document.
I get this error on the one that I created
16/03/2010 12:21:54: [Microsoft][SQL Native Client][SQL Server]Conversion failed when converting the nvarchar value '24 0' to data type int. (CINF)
Here is my SP :-
DECLARE @Invoice AS VARCHAR(15)
DECLARE @Card AS VarChar (20)
SELECT @invoice = NumatCard, @card = CardCode FROM dbo.OPCH
WHERE DocEntry = @list_of_cols_val_tab_del
if @object_type = '18' and @transaction_type in (N'A', N'U') -- AP Invoice is null
begin
If exists (SELECT T0.cardcode, T0.NumAtCard FROM OPCH T0 where T0.NumatCard is null and T0.cardcode=@list_of_cols_val_tab_del)
begin
SET @error = 10
SET @error_message = N'Supplier invoice number not entered.'
END
END
SELECT @INVOICE = NumatCard FROM dbo.OPCH
WHERE DocEntry = @list_of_cols_val_tab_del
if @object_type = '18' and @transaction_type in (N'A', N'U') -- AP Invoice to check if the invoice no exist
begin
If exists (SELECT T0.cardcode, T0.NumatCard FROM OPCH T0 where T0.NumatCard = @invoice and T0.cardcode=@list_of_cols_val_tab_del)
begin
SET @error = 10
SET @error_message = N'This invoice number already exist for this supplier.'
END
END
Regards
Bongani DlaminiThis code should be inserted into the original (or already expanded) SBO_SP_TransactionNotification stored procedure after the line
-- ADD YOUR CODE HERE )
Try this full (and a little modified) procedure:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20), -- SBO Object Type
@transaction_type nchar(1), -- [A]dd, <u>pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int -- Result (0 for no error)
declare @error_message nvarchar (200) -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
-- ADD YOUR CODE HERE
if @object_type = '18' and @transaction_type in (N'A', N'U') -- AP invoice
BEGIN ----
DECLARE @Invoice AS VARCHAR(15)
DECLARE @Card AS VarChar (20)
SELECT @invoice = NumatCard, @card = CardCode FROM dbo.OPCH
WHERE DocEntry = @list_of_cols_val_tab_del
-- AP Invoice is null
If exists (SELECT T0.cardcode, T0.NumAtCard FROM OPCH T0 where T0.NumatCard is null
and T0.DocEntry=@list_of_cols_val_tab_del)
begin
SET @error = 10
SET @error_message = N'Supplier invoice number not entered.'
end
-- AP Invoice to check if the invoice no exist
If exists (SELECT T0.cardcode, T0.NumatCard FROM OPCH T0 where T0.NumatCard = @invoice
and T0.CardCode=@card and T0.DocEntry!=@list_of_cols_val_tab_del)
begin
SET @error = 10
SET @error_message = N'This invoice number already exist for this supplier.'
end
END ----
-- Select the return values
select @error, @error_message
end -
Stored procedure for a calculated value
Hello all..
I have this problem:
I have a data form on which there's a textfield control which is linked to a calculated field. This field is calculated by a stored procedure. The stored procedure is based on some values that might be changed on that same data form. My problem is that when I call the stored procedure it doesn't see the changes that I've made in the DB (Which were not commited yet) although they share the same session.
Here's how I activate the stored procedure in my code:
ViewObjectImpl viewObjectImpl = (ViewObjectImpl)getViewObject();
DBTransaction dbTransaction = viewObjectImpl.getDBTransaction();
Statement stmt = dbTransaction.createStatement(1);
stmt.execute("select ....")
etc.. this is done in my getCalculatedField inside the Viewimpl class.
Any ideas?
Thanks
LironCreate an alternate stored procedure or function that takes the "modified" but not yet committed value(s) as a parameter(s)?
That's what I do, today. You can either use a dynamic view object or straight JDBC to get to the stored function or proc.
Sorry if I misinterpreted what you were after. -
Stored Procedure for Accounts Receivable
Hi. First off, apologies in advance if I have put this question into the wrong topic. Secondly, I first saw SAP 3 weeks ago when I stared my new job and have had no training so please bear with me if some of what I ask doesn't make much sense.
OK, the issue is this. In SAP B1, there is a built in Report called "Customer Receivables Aging" which allows you to see Customer Receivable Accounts by age (e.g 0-30, 31-60, 61-90, 90+) and so on. The problem with the built in report is that it doesn't show all the fields I want - it only shows the Customer Name, balance, and then the aging balances. I want to be able to see things like the customer's contact details, etc. I know this makes no sense because the whole point of the report is to be able to drill down into the different rows, but this report needs to be issued in printed form, hence the need for the extra fields.
Since I can't seen any way from within SAP to change the fields returned by this report, I thought I'd have a stab at writing my own SQL to select out the same data along with the extra fields I wanted. That's when the problems began...try as I might, I cannot get my figures to tally with the SAP Report.
They are almost correct, but not quite. I am sure that I am missing a selection or some other element of the logic that B1 uses to create the built in report.
If you want, I can post the SQL I'm using....I'm not an SQL guru by any means, but I do know my way around it; the biggest problem I have is that I cannot find any documentation as to the 4 letter tables that SAP uses and their relationships except on the most basic level (e.g ORIN is Open Return Invoice [maybe])
Then I thought maybe it might be possible to edit that report section in B1 using the SDK. That would be a better solution as I would not have to 'reinvent the wheel', I can just SELECT an extra field or three to include in the report.
So my question is
->Does anyone have a stored procedure for SQL Server that can replicate correctly the SAP B1 "Customer Receivable Aging", even just the process SAP uses to gather this data would be good.
OR
is it possible to edit this report in SAP to put in the extra fields I want.
Or, am I totally barking up the wrong tree? Thanks in advance, I know this is a long post.Hi Stephen,
There should be a print layout attached to the on-screen report. This can be altered to show the additional fields you want without resorting to SDK or SQL development.
When you have the Customer Receivables Ageing report open on screen, choose Tools-Print Layout Designer or click on the Print Layout Designer icon on the toolbar. When prompted, choose the layout you wish to edit and you'll be taken to the layout design. In the layout, you can add additional fields and should be able to add most business partner fields. As the report is set to portrait by default, I recommend changing it to landscape so you have lots more space to add the extra fields you want. This report writer is fairly intuitive, if a little basic.
You will need to save this new report design, set it to be the default layout and then when you select to print the Customer Receivables Ageing report (ie Print Preview or Print) you will see the new report.
Hope this helps,
Owen -
Stored Procedure for restrict to close documents
Hi,
I want to create a Stored Procedure for restrict to close sales orders for some users, because in Standard Authorizations you have one option to restrict to close, but I need that some users can close quotations and also this users can´t close sales orders. I have this query :
F @object_type='17' AND (@transaction_type='a' or @transaction_type='U' )
BEGIN
IF EXISTS (
SELECT T0.DOCENTRY FROM adoc T0 WHERE T0.[ObjType] = '17'
AND T0.[UserSign] = '1' AND T0.[DocStatus] = 'C' AND
T0.DOCENTRY= @list_of_cols_val_tab_del )
BEGIN
SELECT @Error = 1, @error_message = 'You are not permitted to close Sales Orders'
END
END
But It doesn´t work. I need help!!!
ThanksHi Jose,
You have to correct your transaction type parameters. When you perform close or cancel operations on document; the trasnsaction notification receives parameters u201CCu201D for Cancel and u201CLu201D for Close. So instead of checking add u201CAu201D or update u201CUu201D; you have to modify your transaction type filters for cancel u201CCu201D or close u201CLu201D. It will go like belowu2026
IF @object_type='17' AND (@transaction_type='C' or @transaction_type='L')
Please try above and let me know the results.
Thanks & Regards,
Nitin
Manager, SAP Business One
Greytrix
It's time to think outside the box.
Email: sap at greytrix.com | Web: www.greytrix.com
u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Development Partners for SAP B1 -
Using a stored procedure for a sender jdbc adapter
Hi all,
The requirement is to use a stored procedure, for extracting data from a oracle database.
Is it possible to do this.
If yes, what should be the source structure in this case.
Please help with the exact soln.
Thanks!!
YounusHi,
Did you check the blog pointed by Aamir?
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
You will need to use Oracle Functions instead of Oracle Stored Procedures. Read thru the blog and the note pointed in the blog . Think it is quite a good example.
Regards
Bhavesh -
Stored procedures for User Tables
Can somebody please help me with this matter?. I need to add stored procedures for user tables. Is there any way of doing so?.
Thanks in advance.
Ernesto.Ernesto,
You have posted multiple threads for the same question. Please check the other thread and close this one:
Stored procedures in User Tables
Thanks,
Gordon -
Stored Procedure for Outgoing Payment Approval
Hi
I am writing a stored procedure for Outgoing Payment (Draft) which is not validating my fields
1.Outgoing Draft (Procedure Not Working)
If @object_type = '140' and @transaction_type = 'A'
begin
if exists(select t0.DocEntry from OPDF T0 inner join PDF4 T1 on
T0.DocNum = T1.DocNum where t1.ObjType ='46' AND (T0.Series = '15' AND T1.OcrCode <> 'U-1')
and T0.DocEntry = @list_of_cols_val_tab_del)
begin
set @error = 1
set @error_message = 'Check Unit'
end
End
Regards
John
Edited by: JohnSmith@B1 on Sep 9, 2011 4:49 PMJohn......
Try this.....
IF (@object_type = '140' And (Select ObjType From OPDF
Where DocEntry = @list_of_cols_val_tab_del)='46'
AND @transaction_type IN ('A'))
BEGIN
if exists(select t0.DocEntry from OPDF T0 inner join PDF4 T1 on
T0.DocNum = T1.DocNum where t1.ObjType ='46' AND (T0.Series = '15' AND T1.OcrCode != 'U-1')
and T0.DocEntry = @list_of_cols_val_tab_del)
begin
select @error = 1,
@error_message = 'Check Unit'
end
End
Above SP will only work when your Series Code is 15 and OcrCode is not equal to 'U-1'....
Please confirm........
And Object type for Payment Draft 140 is right.....
Regards,
Rahul -
Pl/sql stored procedure code2 check the emial id is correct or not
if the mail id is [email protected]@.com
then how we do validations means
there must be only one @
i wnat all tghis type of validations 2 check the email id is correct or not?
the procedure that i wnat to validate akll the validationsThis appears to be a duplicate of your existing thread
pl/sql stored procedure for email id validations
I'll answer there.
Justin -
Stored Procedure For Web Service in Visual Composer 7.1
Hello,
I want to use stored procedure for Webservice in Visual Composer 7.1
I can find this Web service but not supported. ( ex) prcreleased_test - Not supported )
Log.
Message: Error in connection - Can' t execute Web service.
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.processExecution:
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb
Log2
Message: Stopped further execution since the interpreter is unusable
Date: 2008-07-01
Time: 16:41:43:906
Category: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent
Location: com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.XGLInterpreter
Application: sap.com/test~kmshim_wf_impl
Thread: HTTP Worker [1]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Correlator ID: 240496500000034715
Argument Objects:
Arguments:
DSR Component: n.a.
DSR Transaction: cb4b3560473711dd9fb4001e4f3b8fcb '
Help me^^ plz..Hi Tanna.
Thanks for your reply^^
I create webservice that access my stored procedure.
But not supported.
http://dmp.humaxdigital.com/HumaxCmdwService/Service1.asmx?wsdl
There are two service. (Hello World - Test, prcrelease_test - Stored Procedure )
'Hello World' is supported but prcrelease_test is not supported. I can't drag to storyboard.
Our company's DB is MSSQL2005.
please help me^^ -
Stored Procedure for Crystal Reports
Hi All,
I developed this test stored procedure to see wheather we could a stored procedure for crystal reports. It compiled without any problem, but when I run it, it gives me error message. Here is the stored Procedure..
CREATE OR REPLACE PROCEDURE WOLD1SIM.TEST_PROCEDURE(
TEST_CURSOR IN OUT TEST_PACKAGE.TEST_TYPE,
TEST_PARAMETER IN TEST_TABLE.ID%TYPE)
AS
BEGIN
OPEN TEST_CURSOR FOR
SELECT *
FROM TEST_TABLE
WHERE TEST_TABLE.ID = TEST_PARAMETER;
END TEST_PROCEDURE;
And
This is the error message..
ERROR at line 2:
ORA-06550: line 2, column 1:
PLS-00201: identifier 'TEST_PROC' must be declared
ORA-06550: line 2, column 1:
PL/SQL: Statement ignored
I have created the package sucessfully.
I was wondering If any one of you can advice me where I am making the mistake.
Thank youCREATE OR REPLACE PROCEDURE WOLD1SIM.TEST_PROCEDURE(TEST_CURSOR IN OUT TEST_PACKAGE.TEST_TYPE,
TEST_PARAMETER IN TEST_TABLE.ID%TYPE)
...you have 2 parameters in your procedure WOLD1SIM.TEST_PROCEDURE(). you should also use two parameters when you execute the procedure. -
I created a stored procedure for send data from a source bd to the bd destination with a link between BD
But it will not work
CREATE OR REPLACE PROCEDURE archivage ( source IN VARCHAR2, destination IN VARCHAR2)
BEGIN
/ * - Prepare a cursor to select from the bd_source: * /
source_cursor: = dbms_sql.open_cursor;
DBMS_SQL.PARSE (source_cursor,
'SELECT table_name FROM dba_tables' | | source,DBMS_SQL.NATIVE);
LOOP i in source_cursor
/* Or i use this !!!!
SELECT object_name FROM dba_objects WHERE owner = 'SCOTT' AND object_type = 'TABLE'*/
DBMS_SQL.DEFINE_COLUMN (source_cursor, i);
end loop
ignorer: DBMS_SQL.EXECUTE = (source_cursor);
/ * - Prepare a cursor to insert into the destination db: * /
destination_cursor: = DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE (destination_cursor,
'INSERT INTO' | | destination | | DBMS_SQL.NATIVE);
/ * - Fetch a row from the source table and insert it into the destination table: * /
loop
if DBMS_SQL.FETCH_ROWS (source_cursor)> 0 ALORS
- Obtenir des valeurs de colonne de la ligne
DBMS_SQL.COLUMN_VALUE (source_cursor,i);
DBMS_SQL.BIND_VARIABLE (destination_cursor,i);
ignorer: DBMS_SQL.EXECUTE = (destination_cursor);
ELSE
EXIT;
End If;
END LOOP;
/*-Close cursor */
COMMIT;
DBMS_SQL.CLOSE_CURSOR (source_cursor);
DBMS_SQL.CLOSE_CURSOR (destination_cursor);
EXCEPTION
WHEN OTHERS, THEN
if
DBMS_SQL.IS_OPEN (source_cursor)then
DBMS_SQL.CLOSE_CURSOR (source_cursor);
End If;
if DBMS_SQL.IS_OPEN (destination_cursor) then
DBMS_SQL.CLOSE_CURSOR (destination_cursor);
End If;
RAISE;
END;find 10 differences ... :(
CREATE OR REPLACE PROCEDURE archivage (source IN VARCHAR2,
destination IN VARCHAR2)
IS
source_cursor INTEGER;
destination_cursor INTEGER;
ignorer INTEGER;
BEGIN
/* - Prepare a cursor to select from the bd_source: */
source_cursor := DBMS_SQL.open_cursor;
DBMS_SQL.
PARSE (source_cursor,
'SELECT table_name FROM dba_tables' || source,
DBMS_SQL.NATIVE);
FOR i IN source_cursor
LOOP
/* Or i use this !!!!
SELECT object_name FROM dba_objects WHERE owner = 'SCOTT' AND object_type = 'TABLE'*/
DBMS_SQL.DEFINE_COLUMN (source_cursor, i);
END LOOP;
ignorer := DBMS_SQL.EXECUTE (source_cursor);
/* - Prepare a cursor to insert into the destination db: */
destination_cursor := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.
PARSE (destination_cursor,
'INSERT INTO ' || destination,
DBMS_SQL.NATIVE);
/* - Fetch a row from the source table and insert it into the destination table: */
LOOP
IF DBMS_SQL.FETCH_ROWS (source_cursor) > 0
THEN
--ALORS
-- Obtenir des valeurs de colonne de la ligne
DBMS_SQL.COLUMN_VALUE (source_cursor, i);
DBMS_SQL.BIND_VARIABLE (destination_cursor, i);
ignorer := DBMS_SQL.EXECUTE (destination_cursor);
ELSE
EXIT;
END IF;
END LOOP;
/*-Close cursor */
COMMIT;
DBMS_SQL.CLOSE_CURSOR (source_cursor);
DBMS_SQL.CLOSE_CURSOR (destination_cursor);
EXCEPTION
WHEN OTHERS
THEN
IF DBMS_SQL.IS_OPEN (source_cursor)
THEN
DBMS_SQL.CLOSE_CURSOR (source_cursor);
END IF;
IF DBMS_SQL.IS_OPEN (destination_cursor)
THEN
DBMS_SQL.CLOSE_CURSOR (destination_cursor);
END IF;
RAISE;
END;
/ -
Stored Procedure for Batch Number Format and Block Duplicate Batch Number
Hi Experts !
I am new one in forum asking question.. I want Stored procedure for Batch Number Format. I want fix one Batch number format in Stored Procedure.
Example :
My Batch number format Like BATCH00001 - It should be first five digit is text format and next five is Numeric.
IF create Goods receipt PO or Goods receipt stage I create batch number like BATCH 00001 or any other number means don't add that document and also duplicated batch number also does not allowed. please give me the solutions. I am sorry for my bad english .Dear Nagarajan K.
Thanks for your replay ..
IF @transaction_type IN ('A','U') AND (@object_type = '106' )
BEGIN
set @item = LEFT( @list_of_cols_val_tab_del, CHARINDEX(CHAR(9), @list_of_cols_val_tab_del,1) - 1)
set @batch = substring(@list_of_cols_val_tab_del, len(@item)+1, (CHARINDEX(CHAR(9), @list_of_cols_val_tab_del,len(@item)+2)) - (len(@item)+1))
--set @base =( select basetype from ibt1 where batchnum = ltrim(rtrim(replace(@batch,char(9),''))))
set @count = (select count(*) from oibt quantity > 0 and where batchnum = ltrim(rtrim(replace(@batch,char(9),''))))
if @count > 1
begin
set @error = 1
set @error_message = 'Please enter different Batch Code for batch ''' + @batch + ''' for item ' + @item
select @error, @error_message
END
END
I used above Stored Procedure. here we can use one batch number for different item but i want to block one batch we should use one item and one time only after than we never use that batch number for same item and another item.
After that I want format for Batch, we should follow unique Batch number for all items. -
Hello all,
yesterday I got one task in that I have to stored procedure for getting host name, host instance and status of that host is it running or stopped.
any body knows where exactly, In which table this details are there in BizTalk databases.
thanksStatus of the host instance is not stored in the SQL database for you to query the status using stored procedure. You have to either use Powershell or WMI to get the status.
In SQL, following table contains the details about the host like Name, LoginName, IsDisables etc but status of the host instance is not stored in the database.
SELECT * FROM BizTalkMgmtDb..adm_HostInstance
Powershell to get the status:
http://axonolympus.nl/?page_id=186&post_id=969&cat_id=6&lang=en
WMI to get the status:
https://msdn.microsoft.com/en-us/library/aa561820.aspx?f=255&MSPPError=-2147217396
https://msdn.microsoft.com/en-us/library/aa578621.aspx
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Stored procedure for disabling all foreign key constraints ?
hi all,
I need a stored procedure for disabling / enable all constraints in that database schema.
Create or replace procedure enable_disable_proc(status varchar2(3),schema_name varchar2(20))
---> where 'status' parameter condition should be ( YES for enable) (NO for disable)
---> 'schema_name' is a parameter where ,only this schema should be affected with this procedure..
Thanks in Advance..Hi,
Try this code
/* Formatted on 2009/07/16 08:15 (Formatter Plus v4.8.8) */
CREATE PROCEDURE enab_disab_proc (
enforce IN VARCHAR2,
current_schema IN VARCHAR2
IS
v_alter_table_sql VARCHAR2 (2000);
BEGIN
FOR rec_con IN (SELECT table_name, constraint_name
FROM user_constraints
WHERE owner = current_schema)
LOOP
IF (enforce = 'NO')
THEN
v_alter_table_sql :=
' alter table '
|| current_schema
|| '.'
|| rec_con.table_name
|| ' disable constraint '
|| rec_con.constraint_name;
ELSE
v_alter_table_sql :=
' alter table '
|| current_schema
|| '.'
|| rec_con.table_name
|| ' enable constraint '
|| rec_con.constraint_name;
END IF;
EXECUTE IMMEDIATE v_alter_table_sql;
END LOOP;
END;Edited by: Salim Chelabi on 2009-07-16 05:15
Maybe you are looking for
-
Problem in updating Photoshop cc
Welcome I have a problem of how many days with Photoshop cc which is when the product update by Adobe Krtw of Claude annex with the program, unfortunately, display my error message when you update The message is http://www.gulfup.com/?KLWtAC When you
-
Help...I am getting this error message when attempting to load the newest Quicktime on my PC. I am a a novice and need detailed instructions on how to fix. I have tried uninstalling all products and reinstalling. Any suggestions?
-
Is it possible to create all views in Material master through ALE(MATMAS) ?
Hi, I want to create all views(One or two may not require) in Inbound MATMAS through ALE. Is it possible ? Currently its creating only Basic data1 & 2,General Plant Data/Storage1 &2 ,plant stock. I didn't set any filter for any segments. Please don't
-
I can't download any files. The download window appears and indicates file is downloading, but it doesn't. I had to open IE to download latest version of Firefox. I have reset all download values to default. I have changed the location of file downlo
-
I just purchased Elements 13. I use a Mac with Yosemite 10.10.2 and iPhoto 9.6. I think I am supposed to be able to click the edit button in iPhoto and it will launch Elements so that I can edit photos in that program. I have changed iPhoto preferenc