Stored Procedure : Verify Database message

Hi,
I'm new to Crystal Reports and am using the latest Trial version.
I'm using this against SQL Server stored procedure - which is working fine on SQL Server side. Running it in SQL Server, returns ~9000 rows, using 58 columns, in about 9secs.
When I try to run this in Crystal Reports, grouping, filtering and designing the report with about 10 fields I get the message:
"One or more fields could not be found in the result set. Use Verify Database to update the report."
I've verified the database and everything is up to date.
I've tried only putting individual fields into the report and this is working fine.
I've used the Set Database Location and it's pointing to the right location, but I've tried updating this just in case.
Are there any limits that need to be adjusted within Crystal Reports?
Any help would be appreciated.
Thanks,
Amrit

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
You may have to check for null values.

Similar Messages

Getting result set from stored procedures in database controls in weblogic

I am calling a stored procedure from database control which actually returns a result set
when i call the stored procedure like
* @jc:sql statement="call PROC4()"
ResultSet sampleProc() throws SQLException;
it gives me exception saying
"weblogic.jws.control.ControlException: Method sampleProc is DML but does not return void or int"
I would appreciate any help
Thanks,
Uma

Thanks for you reply!
1) The stored procedure has head
CREATE OR REPLACE PROCEDURE X_OWNER.DISPLAY_ADDRESS
cv_1 IN OUT SYS_REFCURSOR
AS
err_msg VARCHAR2(100);
BEGIN
--Adaptive Server has expanded all '*' elements in the following statement
OPEN cv_1 FOR
Select ...
commit;
EXCEPTION
WHEN OTHERS THEN
err_msg := SQLERRM;
dbms_output.put_line (err_msg);
ROLLBACK;
END;
If I only run select .. in DBArtisan, it display all 2030,000 rows in 3:44 minutes
2) But when call stored procedure, it will take 80-100 minutes .
3) The stored procedure is translated from sybase using migration tools, it's very simple, in sybase it just
CREATE PROCEDURE X_OWNER.DISPLAY_ADDRESS
AS
BEGIN
select ..
The select part is exact same.
4) The perl code is almost exact same, except the query sql:
sybase verson: my $sql ="exec DISPLAY_ADDRESS";
and no need bind the cursor parameter.
This is batch job, we create a file with all information, and ftp to clients everynight.
Thanks!
Rulin

How To Disable Verify Database Message Alert

How To Disable Verify Database Message Alert?
I have a VB6 open Crystal Reports using Crystal Reports XI R2 (SP5) and almost every time I open a report, I get an alert message about the table has been changed and I have to click "Ok" to make it goes away. Is there a way to disabled this alert or set default to "Ok" so I do not have to click this message every report. Thank you very much.

Hello,
You must verify if the database has changed so you can't disable the message. CR must match what the DB is using or the reports will fail or return wrong data.
It's odd that even after verifying the DB in the designer your app still needs it to be verify the report. You did save the report correct?
Also:
Dim CRApplication As CRAXDDRT.Application
Dim Report As CRAXDDRT.Report
Is the report creation engine and you should be using craxdrt.dll. You need to be licnesed to use craxddrt.dll and this may cause problems for you later when deploying.
Use:
Dim CRApplication As CRAXDRT.Application
Dim Report As CRAXDRT.Report
The mapping is not a switch you can turn on or off but it is Event driven. You need to add code to the viewer section to capture the event if the mapping event fires. Then you can set it to the way you want to use it.
I suggest you purchase a case on line and get to the Report Design team to figure out why when you verify the report your app still thinks it needs to be verified. Something going on in your report that the forum makes it difficult to debug the problem. You can't attach files to forums.
Link to Single Case purchase:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Thank you
Don

Multiple stored procedure in Database Adapter

Can I manually create the wsdl for database adapter, which can have multiple operations for different stored procedures?
I tried creating a wsdl as -
<definitions
name="CustomAdapter"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/CustomAdapter/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/CustomAdapter/"
xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/xsd/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/db/"
>
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/" location="DBAdapterOutboundHeader.wsdl"/>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/xsd/"
schemaLocation="myadapter.xsd" />
</schema>
</types>
<message name="args_in_msg_tscp1">
<part name="InputParameters" element="db:InputParametersTSCP1"/>
</message>
<message name="args_in_msg_sample">
<part name="InputParameters" element="db:InputParametersSAMPLE"/>
</message>
<message name="args_out_msg_sample">
<part name="OutputParameters" element="db:OutputParametersSAMPLE"/>
</message>
<portType name="Proc1_ptt">
<operation name="Proc1">
<input message="tns:args_in_msg_tscp1"/>
</operation>
<operation name="Proc2">
<input message="tns:args_in_msg_sample"/>
<output message="tns:args_out_msg_sample"/>
</operation>
</portType>
<binding name="Proc1_binding" type="tns:Proc1_ptt">
<jca:binding />
<operation name="Proc1">
<jca:operation
InteractionSpec="oracle.tip.adapter.db.DBStoredProcedureInteractionSpec"
SchemaName="SYSTEM"
ProcedureName="TSCP1"
>
</jca:operation>
<input>
<jca:header message="hdr:OutboundHeader_msg" part="outboundHeader"/>
</input>
</operation>
<operation name="Proc2">
<jca:operation
InteractionSpec="oracle.tip.adapter.db.DBStoredProcedureInteractionSpec"
SchemaName="SYSTEM"
ProcedureName="MYSAMPLEPROC"
>
</jca:operation>
<input>
<jca:header message="hdr:OutboundHeader_msg" part="outboundHeader"/>
</input>
<output/>
</operation>
</binding>
<service name="Proc1">
<port name="Proc1_pt" binding="tns:Proc1_binding">

<jca:address location="eis/DB/DBConn25" UIConnectionName="System25"
/>
</port>
</service>
<plt:partnerLinkType name="Proc1_plt" >
<plt:role name="Proc1_role" >
<plt:portType name="tns:Proc1_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>
Then I copied this wsdl and corresponding xsd to my BPEL process and created a partnerlink for this wsdl.
I added two invoke activities, one for Proc1 operation and other for Proc2 operation.
When I tried testing this BPEL process, the BPEL process manager was invoking only Proc1 operation for both invoke activities and giving me error as-
<Faulthttp://schemas.oracle.com/bpel/extensionhttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>null:bindingFault</faultcode>
<faultstring>business exception</faultstring>
<faultactor>cx-fault-actor</faultactor>
<detail>
<code>1400</code>
<summary>file:/D:/Morrisons/OracleProducts/product/Oracle_SOA/bpel/domains/TestPOC/tmp/.bpel_MyAdapterTest_1.0_c564165702d743346cadb68bc5bbb594.tmp/CustomAdapter.wsdl [ Proc1_ptt::Proc1(InputParameters) ] - WSIF JCA Execute of operation 'Proc2' failed due to: Error while trying to prepare and execute an API. An error occurred while preparing and executing the SYSTEM.TSCP1 API. Cause: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 [Caused by: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 ] ; nested exception is: ORABPEL-11811 Error while trying to prepare and execute an API. An error occurred while preparing and executing the SYSTEM.TSCP1 API. Cause: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 [Caused by: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 ] Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable. </summary>
<detail> Internal Exception: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 Error Code: 1400</detail>
</detail>
</Fault>
I want to create only one wsdl for all the strored procedures.

Can I manually create the wsdl for database adapter, which can have multiple operations for different stored procedures?
I tried creating a wsdl as -
<definitions
name="CustomAdapter"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/CustomAdapter/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/CustomAdapter/"
xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/xsd/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/db/"
>
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/" location="DBAdapterOutboundHeader.wsdl"/>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/xsd/"
schemaLocation="myadapter.xsd" />
</schema>
</types>
<message name="args_in_msg_tscp1">
<part name="InputParameters" element="db:InputParametersTSCP1"/>
</message>
<message name="args_in_msg_sample">
<part name="InputParameters" element="db:InputParametersSAMPLE"/>
</message>
<message name="args_out_msg_sample">
<part name="OutputParameters" element="db:OutputParametersSAMPLE"/>
</message>
<portType name="Proc1_ptt">
<operation name="Proc1">
<input message="tns:args_in_msg_tscp1"/>
</operation>
<operation name="Proc2">
<input message="tns:args_in_msg_sample"/>
<output message="tns:args_out_msg_sample"/>
</operation>
</portType>
<binding name="Proc1_binding" type="tns:Proc1_ptt">
<jca:binding />
<operation name="Proc1">
<jca:operation
InteractionSpec="oracle.tip.adapter.db.DBStoredProcedureInteractionSpec"
SchemaName="SYSTEM"
ProcedureName="TSCP1"
>
</jca:operation>
<input>
<jca:header message="hdr:OutboundHeader_msg" part="outboundHeader"/>
</input>
</operation>
<operation name="Proc2">
<jca:operation
InteractionSpec="oracle.tip.adapter.db.DBStoredProcedureInteractionSpec"
SchemaName="SYSTEM"
ProcedureName="MYSAMPLEPROC"
>
</jca:operation>
<input>
<jca:header message="hdr:OutboundHeader_msg" part="outboundHeader"/>
</input>
<output/>
</operation>
</binding>
<service name="Proc1">
<port name="Proc1_pt" binding="tns:Proc1_binding">

<jca:address location="eis/DB/DBConn25" UIConnectionName="System25"
/>
</port>
</service>
<plt:partnerLinkType name="Proc1_plt" >
<plt:role name="Proc1_role" >
<plt:portType name="tns:Proc1_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>
Then I copied this wsdl and corresponding xsd to my BPEL process and created a partnerlink for this wsdl.
I added two invoke activities, one for Proc1 operation and other for Proc2 operation.
When I tried testing this BPEL process, the BPEL process manager was invoking only Proc1 operation for both invoke activities and giving me error as-
<Faulthttp://schemas.oracle.com/bpel/extensionhttp://schemas.xmlsoap.org/soap/envelope/>
<faultcode>null:bindingFault</faultcode>
<faultstring>business exception</faultstring>
<faultactor>cx-fault-actor</faultactor>
<detail>
<code>1400</code>
<summary>file:/D:/Morrisons/OracleProducts/product/Oracle_SOA/bpel/domains/TestPOC/tmp/.bpel_MyAdapterTest_1.0_c564165702d743346cadb68bc5bbb594.tmp/CustomAdapter.wsdl [ Proc1_ptt::Proc1(InputParameters) ] - WSIF JCA Execute of operation 'Proc2' failed due to: Error while trying to prepare and execute an API. An error occurred while preparing and executing the SYSTEM.TSCP1 API. Cause: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 [Caused by: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 ] ; nested exception is: ORABPEL-11811 Error while trying to prepare and execute an API. An error occurred while preparing and executing the SYSTEM.TSCP1 API. Cause: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 [Caused by: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 ] Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable. </summary>
<detail> Internal Exception: java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."EMPS"."EMPID") ORA-06512: at "SYSTEM.TSCP1", line 4 ORA-06512: at line 1 Error Code: 1400</detail>
</detail>
</Fault>
I want to create only one wsdl for all the strored procedures.

Error Stored Procedure Upgrading database from SBO 2007A PL42 to SBO 8.8

Hi,
When executing the SBO 8.8 PL00 upgrade procedure for databases for an "old" database 2007A PL 42, upgrtade stops whith an error concerning a missing stored procedure "_TmSp_CorrectWrongDocLineNumberInOINMForIPF which is not found".
The error details says that it occurs on "Stock Updates" step (just after Checks for Payment) and log file gives the following message here after.
Does anybody have an idea how to upgrade the 2007A database ?
Thanks
Error message in log :
Upgrade Error Technical Failed to call Stored Procedure TmSpCorrectWrongDocLineNumberInOINMForIPF
Edited by: Michel Diepart on Oct 24, 2009 10:55 PM

Hi Paul,
Thanks for your prompt response on a saturday and so late in the evening
Concerning the Stored Procedure, I would like to delete it but ... it doesn't exist and that's the problem...
No such procedure in my database (programmability / Stored procedurefolder in SQL).
When searching on the forum about this stored procedure, no result.
Does this stored procedure have a link with something regarding adjustment in stock ?
"Stock updates" : what table is it in SAP B1 ? If necessary I could save the table, create a sql query to re-create it after delete and try to restart the upgrade procedure but I don't know what is the related table...
I will also try with another 2007A PL 42 database to see if it works.
Do you know if anybody has already try to upgrade a 2007 PL42 dabase to SBO 8.8 ?
Best regards

How to invoke a stored procedure in database adapter

Hi All,
i have created a database adapter which contains a stored procedure, the procedure is merge process,which bring data from another database,
i have made sure that checking for new records and updating any changes from the source database everything has been taken care in the procedure.
my question is how to invoke this process, what all process activities need to be associated with the database adapter, to invoke it
assuming i want to run it every 5 hours,
any reply would be of great help.
Regards
Ananth

Hi,
V thanks for you reply, i am v much new to this bpel environment, i tried using invoke but got errors like
Error(61):
[Error ORABPEL-10107]: Invalid initial activities
[Description]: in line 61 of "C:\jdevstudio10134\jdev\mywork\Incremental_refresh\data_incr_refresh\bpel\data_incr_refresh.bpel", Initial activity is invalid. An initial activity must be of a receive or pick activity..
[Potential fix]: Please re-arrange the BPEL process definition to make sure its initial activity is of a receive or pick activity. (e.g. by adding new receive activity or removing invalid initial activities..
Error:
[Error ORABPEL-10063]: missing initial receive activity
[Description]: in "C:\jdevstudio10134\jdev\mywork\Incremental_refresh\data_incr_refresh\bpel\data_incr_refresh.bpel", there is no receive activity that starts the process.
[Potential fix]: make sure one of "pick" and "receive" activities have attribute "createInstance" set to be "yes".
later i used the service pick, so from pick i am heading to ivoke and later to finally database adapter, but still getting below error
Error(59):
[Error ORABPEL-10900]: xml parser error
[Description]: in line 59 of "file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel", XML parsing failed because file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel<Line 59, Column 19>: XML-24536: (Error) Missing Attribute 'partnerLink'.
[Potential fix]: Fix the invalid XML.
Error(59):
[Error ORABPEL-10900]: xml parser error
[Description]: in line 59 of "file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel", XML parsing failed because file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel<Line 59, Column 19>: XML-24536: (Error) Missing Attribute 'portType'.
[Potential fix]: Fix the invalid XML.
Error(59):
[Error ORABPEL-10900]: xml parser error
[Description]: in line 59 of "file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel", XML parsing failed because file:/C:/jdevstudio10134/jdev/mywork/Incremental_refresh/data_incr_refresh/bpel/data_incr_refresh.bpel<Line 59, Column 19>: XML-24536: (Error) Missing Attribute 'operation'.
[Potential fix]: Fix the invalid XML.

Can't see stored procedure in database explorer

I'm using mysql 5.0. When I expan the database in database explorer, I can see only tables. Stored procedure folder is shown there but when i try to expand it..nothing inside it.
Anyone knew the solution, Could u please help??!
Thanks in advance.

You'll need to publish the site to your remote server and post a URL here to get any help. It could be you're testing locally and IE browser security is getting in the way. Or it may be due to a missing file on server, etc...
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Stored procedure with database link with "from table(...)"

Hi guys,
I've been told I can't create views on a database by the design team and so have to use this stored procedure to obtain the values.
select HAN_ID, HAN_DS, GLOBAL_IN, LOCAL_IN
from table(cast(ODADMIN.ODP00002_QUERY.Execute001@DBLINK(11312,'EN') as
ODADMIN.ODP00002_001_Array@DBLINK)) WHERE LOCAL_IN = 'Y';I've been told that it works when you remove the database links (so on the actual database) when you remove the cast part. I've tried it with my link and with/without the cast part but it doesn't work. With the example above I get the error: ORA-00907: missing right parenthesis.
When I remove the CAST-AS and the additional parenthesis it brings i get the error: ORA-00904: "ODADMIN"."ODP00002_QUERY"."EXECUTE001": invalid identifier
When I do table( *"* ODADMIN.ODP00002_QUERY.Execute001@MWW_DEV(11312,'EN') *"* )... -- wrapping the call in speech marks I get: ORA-00972: identifier is too long
Anyone see what's wrong? Thanks for any help.
Mike

Hi Ben,
Asking now. By a view I mean one local to the database; I could create one on APEX but then I use the database link twice instead of just 1.
His reasoning Ben:
Firstly, Maintenance. We will have to maintain additional views (at additional code). Secondly, if the view has a JOIN, then you can't update through it (without complexities). If we have to get the View to pass the data to a Procedure (that's a pain). Also, standards..
All update occur via either a Procedure, or a Base view, across over 1000 tables
That's the standard, and doing things differently is costly long term
People will not know how it works, it will have to be explained, maintained..etc.
If the Application has the Business Rules, then updates via Base Views, that's a more standard way of developing. Also, if you update via this view, you'll update multiple rows in one call, which is in-effficient if only ONE row needs to change. Therefore, single row updates from the Application is more efficient
The procedure is as follows:
--SET SERVEROUTPUT ON
DECLARE
nPBusLoc       NUMBER(5):=11312;
sPHanId        VARCHAR2(3):='SB1';
sPLngId        VARCHAR2(2):='EN';
sPDesc         VARCHAR2(30);
sPAllowAlloc   VARCHAR2(1);
sPShowEnq      VARCHAR2(1);
sPAllowDel     VARCHAR2(1);
sPShowScan     VARCHAR2(1);
sPGlobalLocal VARCHAR2(1);
sPReturnCd     VARCHAR2(2);
sPReturnTx     VARCHAR2(100);
BEGIN
ODADMIN.ODP00001.getHandlingCodes
                       (nPBusLoc    -- IN   NUMBER
                      ,sPHanId      -- IN   VARCHAR2
                      ,sPLngId      -- IN   VARCHAR2
                      ,sPDesc       -- OUT VARCHAR2
                      ,sPAllowAlloc -- OUT VARCHAR2
                      ,sPShowEnq    -- OUT VARCHAR2
                      ,sPAllowDel   -- OUT VARCHAR2
                      ,sPShowScan   -- OUT VARCHAR2
                      ,sPGlobalLocal-- OUT VARCHAR2
                      ,sPReturnCd   -- OUT VARCHAR2
                      ,sPReturnTx   -- OUT VARCHAR2
DBMS_OUTPUT.PUT_LINE('nPBusLoc                 = '||nPBusLoc              );
DBMS_OUTPUT.PUT_LINE('sPHanId                  = '||sPHanId               );
DBMS_OUTPUT.PUT_LINE('sPLngId                  = '||sPLngId               );
DBMS_OUTPUT.PUT_LINE('sPDesc                   = '||sPDesc                );
DBMS_OUTPUT.PUT_LINE('sPAllowAlloc             = '||sPAllowAlloc          );
DBMS_OUTPUT.PUT_LINE('sPShowEnq                = '||sPShowEnq             );
DBMS_OUTPUT.PUT_LINE('sPAllowDel               = '||sPAllowDel            );
DBMS_OUTPUT.PUT_LINE('sPShowScan               = '||sPShowScan            );
DBMS_OUTPUT.PUT_LINE('sPGlobalLocal            = '||sPGlobalLocal         );
DBMS_OUTPUT.PUT_LINE('sPReturnCd               = '||sPReturnCd            );
DBMS_OUTPUT.PUT_LINE('sPReturnTx               = '||sPReturnTx            );
END;
/Mike
Edited by: Dird on 27-Aug-2009 01:50

Firing Stored Procedure Into Database At Runtime

HI All,
I need a help !. I have created a stored procedure that creates a dynamic SP at runtime depending upon certain values stored in my database. Now I want that as soon as the dynamic SP is written in a flat file on the database server it should be compiled into database.
What I am doing right now is :
step1: create a SP
step2: fetch values from database
step3: create a string from it which actually contains syntax for creating another SP
step4: open a new file "test.sql" on the database server
step5: write this string into "test.sql"
step6: close the file "test.sql"
step7: exit SP
This creates a file named "test.sql" on oracle database server.
Now my requirement is to include another step after step6 say
step6.1: compile "test.sql" into the database.
Does any one have idea how to achieve this using SP.
Thanks & regards
Vivek Verma

I don't know which solution you're attempting, but here goes.
You cannot build a procedure using objects (e.g. tables, views) etc when you have been granted rights to them via role. Similarly you cannot use execute immediate to use a system privilege (e.g. CREATE PROCEDURE) if you have been granted it through a role (e.g. CONNECT).
In both cases the relevant solution is to get the grantor (table owner, dba user) to grant the privilege to your account by name.
Cheers, APC

Procedure or Java Stored procedure to send message/xml/data to MQ Series Qu

Hi
Using a simple Oracle Procedure or Oracle's Java stored procedure, I would like to send data to MQ Queue. It would be great if someone can help me with a piece of sample code.
Thanks in Advance
-GV

Hi Prabhu, Vlad
This is the same question which i asked few days back.
Our Backend system, only understands ISO8583 message format. And since I work in a financial environment, I can only send and receive data using "socket" protocol (tcp/ip).
So, This is where I have stuck forever...
I create a BS. select "any xml" . Then, I select "socket" as protocol. and click on finish.
Then, I create a Proxy Service based on my BS.
But, where/how do I convert the input xml packet into an ISO8583 format and send it over to my backend system ???
salil

CALLING STORED PROCEDURE IN DATABASE FROM FORMS4.5

Is there any body know how to call stored procedure from Forms 4.5 ?
I am writing a when-button-pressed trigger.
Put the stored procedure name on there. But
it said "stored procedure name is not declared on this scope".
Thanks a lot
null

Try logging in to SQL*Plus and running the procedure, e.g....
SQL> begin
database_procedure_name(update_web);
end;
If it runs OK there, then it should run from within your form (provided that you are logged in as the same user as the test with SQL*Plus.

Stored Procedure for Databases

Hi All,
Can we use Stored Procedure to read from Sybase Tables using sender JDBC Adapter?
Regards,
XIer

XIer,
I read the below threads , I think it will be useful. Just read the below two links.
https://www.openadaptor.org/developerFAQ.html [ Read under Sybase Faq's]
http://groups.google.com/group/sybase.public.jconnect50/browse_thread/thread/833143dc223d1a33/9db2c610b7336e86?q=chain&rnum=8&hl=en
raj.

To find the location of PL/SQL stored PROCEDURE in database

hi
this is the detail i ve taken from Application developer-Concurrent Program Executable
Executable NAPESCO_STAFF_LEDGER_DTLS
Short Name NPSTALEDDTLS
Application Human Resources
Execution Method PL/SQL Stored Procedure
Execution File name NAPESCO_STAFF_LEDGER_DTLS
i would like to know how to view and modify this procedure ,where is it stored
kindly help

Hi,
This seems to be a custom package. To view the source of the "PL/SQL Stored Procedure" concurrent program please refer to (Note: 455582.1 - Where Can I Get the Source File of Any 'Pl/Sql Stored Procedure' on Current Program?).
Thanks,
Hussein

How to see the output of stored procedure in database express edition 10g

Hi All,
I have done the workout query in database express edition
create or replace procedure emp_ra (did in number) is
commission real;
no_comm exception;
begin
select commission_pct into commission from employees where department_id = did;
if commission is null THEN
raise no_comm;
else
DBMS_output.put_line(commission);
end if;
EXCEPTION
WHEN no_comm THEN
DBMS_OUTPUT.PUT_LINE ('This employee does not receive a commission.');
WHEN OTHERS THEN
NULL;
end;
the procedure compiled successfully with out any error.
After this i executed the below
set serveroutput on
Begin
emp_ra (90);
end;
it says
Statement processed.
0.00 seconds
But i unable to see the result,could anyone please help me on this.
Thanks
Edited by: thelakbe on May 7, 2012 11:17 PM
Edited by: thelakbe on May 7, 2012 11:17 PM
Edited by: thelakbe on May 7, 2012 11:18 PM

i exectued the same procedure in XE Database and have errors:
SQL> create or replace procedure emp_ra (did in number) is
2 commission real;
3 no_comm exception;
4 begin
5 select commission_pct into commission from employees where department_id =
did;
6 if commission is null THEN
7 raise no_comm;
8 else
9 DBMS_output.put_line(commission);
10 end if;
11 EXCEPTION
12 WHEN no_comm THEN
13 DBMS_OUTPUT.PUT_LINE ('This employee does not receive a commission.');
14 WHEN OTHERS THEN
15 NULL;
16 end;
17 /
Advertencia: Procedimiento creado con errores de compilaci¾n.I am not a expert of SQL but i think your variables are wrong and you must initialize
commission real;
no_comm exception;For better information open a new thread at SQL Forum.

Debug Stored procedure or database trigger by 10g Forms

Hi,
I want to debug my table level trigger (On update for each row), I am updating this table by forms. When I debug this form I am unable to watch the database debug.
Please help me regarding database trigger/function/procedures by debugging forms.

not possible via forms
you can debug it on SQL Developer by using manual INSERT Updates commands

Stored Procedure : Verify Database message

Similar Messages

Maybe you are looking for