Stored procedure with select query
Hi,
I have a problem , We have a sysnchronous scenario and executing a stored procedure and a selcect statement .
it is running fine with little confilt in data is there.
We we run the scenario it execute the strored procedure and return the value like 500 and under select statement it select entire table which has same flag.
I want to execute stored procdure and in slect statement one row at a time and then again it will insert to other table in then database.
currently we are getting value like this.
<?xml version="1.0" encoding="utf-8" ?>
- <ns0:MT_SP_JDBC_response xmlns:ns0="http://ns_cfgCountry">
- <GetNextSiteNumber_response>
<Result>10000000000400</Result>
</GetNextSiteNumber_response>
- <Statement2_response>
- <row>
<ID>IN</ID>
<Description>INDIA</Description>
<GDate />
<FLAG>FALSE</FLAG>
</row>
- <row>
<ID>EN</ID>
<Description>ENGLAND</Description>
<GDate />
<FLAG>FALSE</FLAG>
</row>
- <row>
<ID>ZA</ID>
<Description>SA</Description>
<GDate />
<FLAG>FALSE</FLAG>
</row>
</Statement2_response>
</ns0:MT_SP_JDBC_response>
Regards
Laxmi Bhushan Jha
Hi,
Can u please write your req little clear....
If you want to selcect and update a table and again select ... what ever it may be.... all these has to be done in the stored procedure only.
At the end of all ur statements u pass back the value from your Stored Procedure
Babu
Similar Messages
-
Stored procedure with select return multiple rows
hi,
in transact the stored procedure is . .
CREATE PROCEDURE MIPROCEDIMIENTO @CODE INT AS
BEGIN
SELECT COD, NAME, LASTNAME FROM EMPLOYE WHER COD = @CODE;
END
in oracle how?
please, i speak spanish. .
thankshttp://download.oracle.com/docs/cd/E11882_01/appdev.112/e10767/procedures_plsql.htm#TDPNG60035
Sybrand Bakker
Senior Oracle DBA -
Calling a Stored Procedure with output parameters from Query Templates
This is same problem which Shalaka Khandekar logged earlier. This new thread gives the complete description about our problem. Please go through this problem and suggest us a feasible solution.
We encountered a problem while calling a stored procedure from MII Query Template as follows-
1. Stored Procedure is defined in a package. Procedure takes the below inputs and outputs.
a) Input1 - CLOB
b) Input2 - CLOB
c) Input3 - CLOB
d) Output1 - CLOB
e) Output2 - CLOB
f) Output3 - Varchar2
2. There are two ways to get the output back.
a) Using a Stored Procedure by declaring necessary OUT parameters.
b) Using a Function which returns a single value.
3. Consider we are using method 2-a. To call a Stored Procedure with OUT parameters from the Query Template we need to declare variables of
corresponding types and pass them to the Stored Procedure along with the necessary input parameters.
4. This method is not a solution to get output because we cannot declare variables of some type(CLOB, Varchar2) in Query Template.
5. Even though we are successful (step 4) in declaring the OUT variables in Query Template and passed it successfully to the procedure, but our procedure contains outputs which are of type CLOB. It means we are going to get data which is more than VARCHAR2 length which query template cannot return(Limit is 32767
characters)
6. So the method 2-a is ruled out.
7. Now consider method 2-b. Function returns only one value, but we have 3 different OUT values. Assume that we have appended them using a separator. This value is going to be more than 32767 characters which is again a problem with the query template(refer to point 5). So option 2-b is also ruled out.
Apart from above mentioned methods there is a work around. It is to create a temporary table in the database with above 3 OUT parameters along with a session specific column. We insert the output which we got from the procedure to the temporary table and use it further. As soon the usage of the data is completed we delete the current session specific data. So indirectly we call the table as a Session Table. This solution increases unnecessary load on the database.
Thanks in Advance.
RajeshRajesh,
please check if this following proposal could serve you.
Define the Query with mode FixedQueryWithOutput. In the package define a ref cursor as IN OUT parameter. To get your 3 values back, open the cursor in your procedure like "Select val1, val2, val3 from dual". Then the values should get into your query.
Here is an example how this could be defined.
Package:
type return_cur IS ref CURSOR;
Procedure:
PROCEDURE myProc(myReturnCur IN OUT return_cur) ...
OPEN myReturnCur FOR SELECT val1, val2, val3 FROM dual;
Query:
DECLARE
MYRETURNCUR myPackage.return_cur;
BEGIN
myPackage.myProc(
MYRETURNCUR => ?
END;
Good luck.
Michael -
Problem Calling MaxDB stored procedure with output from MII Query template
Hi,
I am using Max DB Database studio to write stored procedure, I am calling stored procedure from MII Query using CALL statement.
Can anyone guide me how to pass output values of stored procedure.
Examlpe::
call ProcName('[Param.1]','[Param.2]','[Param.3]','[Param.4]','[Param.5]', :isSuccess, :Trace)
In the above line of code I am not able to get the output values of stored procedure that is isSuccess and Trace values in Query template when executed. But same thing I get when executed in Database studio.
How do I call with outputs for any stored procedure in MII.
Any help would be appriciated.
Thanks,
PadmaMy call statement is like this
call RESULTDATA_INSERT('[Param.1]','[Param.2]','[Param.3]', :isSuccess, :Trace)
I am able to insert record in DB, But I am not getting output values in Query template.I have done this in Fixed Query, when I execute it throws me "Fatal error as Loaded content empty".
I tried giving select below call but it dont work.
Regards,
Rao -
Running a SQL Stored Procedure from Power Query with Dynamic Parameters
Hi,
I want to execute a stored procedure from Power Query with dynamic parameters.
In normal process, query will look like below in Power Query. Here the value 'Dileep' is passed as a parameter value to SP.
Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData 'Dileep'"]
Now I want to pass the value dynamically taking from excel sheet. I can get the required excel cell value in a variable but unable to pass it to query.
Name_Parameter = Excel.CurrentWorkbook(){[Name="Table3"]}[Content],
Name_Value = Name_Parameter{0}[Value],
I have tried like below but it is not working.
Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData Name_Value"]
Can anyone please help me with this issue.
Thanks
DileepHi,
I got it. Below is the correct syntax.
Source = Sql.Database("ABC-PC", "SAMPLEDB", [Query="EXEC DBO.spGetData '" & Name_Value & "'"]
Thanks
Dileep -
Calling stored procedures with parameters with the Database Connectivi​ty Toolkit
Hi all,
I am new to the forum and am having difficulty finding a solution to a particular problem I am having regarding using the LabVIEW Database Connectivity Toolkit on a project I am currently working on at my job. I have a database in which I have tables and stored procedures with parameters. Some of these stored procedures have input, output, and return parameters.
I have been trying to follow this example but to no avail: http://digital.ni.com/public.nsf/allkb/07FD130746083E0686257300006326C4?OpenDocument
One such stored procedure I am working on implementing is named "dbo.getAllowablePNs", which executes "SELECT * from DeviceType" (DeviceType is the table). In this case, it does not require an input parameter, it has an output parameter that generates the table [cluster], and has a return parameter which returns an integer value (execution status code) to show if an error occurred. The DeviceType table has 3 columns; ID (PK, int, not null), PN (nvarchar(15), null), and NumMACAddresses (int, null). I have gone over many examples and have talking to NI support to try to implement this and similar stored procedures in LabVIEW but have not been successful. I am able to connect to the database with the Open Connection VI without error, but am running into some confusion following this step. I am then trying to use the Create Parameterized Query VI to call the stored procedure and set the parameters. I assume I would then use the Set Parameter Value VI for each parameter that is wired into the parameters input on the previous Parameterized Query VI? I am also having some confusion during and following these steps as well. I would greatly appreciate any advice or suggestions anyone might have in regards to this situation as I am not a SQL expert. Also, I would be happy to provide any more information that would be helpful.
Regards,
Jon
Solved!
Go to Solution.Also, I don't know if this would be helpful but here is the actual stored procedure in SQL:
CREATEPROCEDURE [dbo].[getLastSequenceNumber]
@p1 nvarchar(10)='WO-00000'
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SETNOCOUNTON;
-- Insert statements for procedure here
selectmax(SequenceNumber)from Devices where WorkOrderNumber= @p1
END
GO -
Oracle Stored Procedure with out parameter
Good morning,
Is it possible to use an Oracle stored procedure with out parameters in MII ?
If yes, what is the manipulation to see the values of parameters Out?
Thank youMichael,
This is the MII query template :
DECLARE
STRCOMPTERENDU NVARCHAR2(200);
BEGIN
STRCOMPTERENDU := NULL;
XMII.SP_VALIDATEPROCESSORDERSLIST2 ( STRCOMPTERENDU => [Param.1] );
COMMIT;
END;
and the stocked procedure code
CREATE OR REPLACE PROCEDURE XMII.SP_ValidateProcessOrdersList2(strCompteRendu OUT nVarchar2) IS
tmpVar NUMBER;
debugmode INT;
strClauseSql varchar(2048);
strListPOactif varchar(1024);
dtmTimeStamp DATE;
NAME: SP_ValidateProcessOrdersList
PURPOSE:
REVISIONS:
Ver Date Author Description
1.0 18/06/2008 1. Created this procedure.
NOTES:
Automatically available Auto Replace Keywords:
Object Name: SP_ValidateProcessOrdersList
Sysdate: 18/06/2008
Date and Time: 18/06/2008, 18:45:32, and 18/06/2008 18:45:32
Username: (set in TOAD Options, Procedure Editor)
Table Name: (set in the "New PL/SQL Object" dialog)
BEGIN
tmpVar := 0;
debugmode := 0;
-- lecture date systeme pour time stamp
select sysdate into dtmTimeStamp from dual;
if debugmode = 1 then
DBMS_OUTPUT.put_line('SP_ValidateProcessOrdersList');
end if;
-- insertion du bloc dans le log
insert into LOG_ORDER
(DATE_ORDER,BLOCK_ORDER,ID_LOG_ORDER)
values
(dtmTimeStamp,'SP_ValidateProcessOrdersList',ID_LOG_ORDER.nextval);
Commit;
if debugmode = 1 then
DBMS_OUTPUT.put_line('insertion LOG OK');
end if;
strCompteRendu := '0123456-896;0123456-897';
commit;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
ROLLBACK;
-- insertion du bloc dans le log
insert into LOG_ORDER
(DATE_ORDER,BLOCK_ORDER,ID_LOG_ORDER)
values
(dtmTimeStamp,' ',ID_LOG_ORDER.nextval);
COMMIT;
-- Consider logging the error and then re-raise
RAISE;
END SP_ValidateProcessOrdersList2;
Thanks for your help
Alexandre -
Call stored procedure with OUT parameter
Hello,
I have created a short-lived process. Within this process I am using the "FOUNDATION > JDBC > Call Stored Procedure" operation to call an Oracle procedure. This procedure has 3 parameters, 2 IN and 1 OUT parameter.
The procedure is being executed correctly. Both IN parameters receive the correct values but I am unable to get the OUT parameter's value in my process.
Rewriting the procedure as a function gives me an ORA-01460 since one of the parameters contains XML (>32K) so this is not option...
Has someone been able to call a stored procedure with an OUT parameter?
Regards,
NicoObject is Foundation, Execute Script
This is for a query, you can change to a stored procedure call. Pull the value back in the Java code then put into the process variable.
import javax.naming.InitialContext;
import javax.sql.DataSource;
import java.sql.*;
PreparedStatement stmt = null;
Connection conn = null;
ResultSet rs = null;
try {
InitialContext ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("java:IDP_DS");
conn = ds.getConnection();
stmt = conn.prepareStatement("select FUBAR from TB_PT_FUBAR where PROCESS_INSTANCE_ID=?");
stmt.setLong(1, patExecContext.getProcessDataLongValue("/process_data/@inputID"));
rs = stmt.executeQuery();
rs.next();
patExecContext.setProcessDataStringValue("/process_data/outData", rs.getString(1));
} finally {
try {
rs.close();
} catch (Exception rse) {}
try {
stmt.close();
} catch (Exception sse) {}
try {
conn.close();
} catch (Exception cse) {} -
Hi all,
I want to know: calling to stored procedure is support in EJB3?
Specifically if it's possible to call one to return a sql query, like a ref cursor in Oracle Database or a stored procedure with a sql query insight in Microsoft Sql Server.
Historically, our teachers say to us "put your logic nearest to the database, this is a good practice and preserve the data integrity". This concept caused many legacy systems currently have a layer of stored procedure; the only way of accessing data (like in may company).
With arrive of Object to Relagtional Mapping APIs this concept it seems to go direct to the trash.... but, What happen with all of this legacy logic?. Can we use them?
I've search on the Web but nothing I've found. Some APIs like Oracle TopLink have support to calling stored procedure. But nothing in EJB3.
Well, I hope some help of your.
Thanks!Well, may be my original question was badly raised.
Being more precise I talk about the following thing:
How to execute a stored procedure that returns the result of a SQL query (like a ref cursor in Oracle) and then to map this result to Java objects in JPA/EJB3?
The Query interface allows to execute native SQL querys , but I have only been successful executing ordinary SQL querys (like SELECT * FROM Table).
I wish some like this:
--Stored procedure some like that
CREATE STORED PROCEDURE GET_CUST_SP(AGE INT, CRESULT OUT REF CURSOR) IS
BEGIN
OPEN CURSOR CRESULT FOR;
SELECT * FROM CUST_TAB WHERE CUS_AGE = AGE;
END;
/*The EJB Entity*/
@NamedNativeQuery(
name="getCust",
query="GET_CUST_SP(:AGE )",
resultsetMapping="myCustMapping")
@SqlResultSetMapping(.....)
@Entity
public class Customer {
Or may be in programmatic mode through Query interface...
Well, thanks for your help.
regards. -
Calling a stored procedure with a CLOB as input parameter
Hello,
I was unsuccessfully trying to call a stored procedure with a clob as input parameter from my C++ application using occi.
Anyone got a working example to look at?
I already checked the thread Invalid OCI handle when creating a Blob which didn't help.
The problem seems to be that I don't have a lob locator to write my data (xml file) to. I tried creating a temporary clob using the sys.dbms_lob package which only resulted in a major headache on my part...
I would appreciate any help.
Kind regards
Horst
my environment:
Visual Studio 2008, C++ application
Oracle 11gTo start using a blob you have to insert it into the database and then get it back. Sounds weird but that is how it is. Here is a very simple program to do this:
#include<occi.h>
#include <iostream>
using namespace oracle::occi;
using namespace std;
int main()
try
Environment *env = Environment::createEnvironment(Environment::OBJECT);
Connection *conn = env->createConnection("hr","hr","");
string stmt1 = "insert into blob_tab values (:1) ";
string stmt2 = "select col1 from blob_tab";
Blob blob(conn);
blob.setEmpty(conn);
Statement *stmtObj = conn->createStatement(stmt1);
stmtObj->setBlob(1,blob);
stmtObj->executeUpdate();
conn->commit();
Blob blob1(conn);
Statement *stmtObj2 = conn->createStatement(stmt2);
ResultSet *rs = stmtObj2->executeQuery();
while(rs->next())
blob1 = rs->getBlob(1);
string stmt3 = "begin my_proc(:1) ;end;";
Statement *stmtObj3 = conn->createStatement(stmt3);
stmtObj3->setBlob(1,blob1);
stmtObj3->executeUpdate();
catch (SQLException e)
cout << e.getMessage();
/* The tables and procedure are primitive but ok for demo
create table blob_tab(col1 blob);
create or replace procedure my_proc(arg in blob)
as
begin
-- just a putline here. you can do other more meaningful operations with the blob here
dbms_output.put_line('hello');
end;
}Hope this helps.
Thanks,
Sumit -
T-sql 2008 r2 place results from calling a stored procedure with parameters into a temp table
I would like to know if the following sql can be used to obtain specific columns from calling a stored procedure with parameters:
/* Create TempTable */
CREATE TABLE #tempTable
(MyDate SMALLDATETIME,
IntValue INT)
GO
/* Run SP and Insert Value in TempTable */
INSERT INTO #tempTable
(MyDate,
IntValue)
EXEC TestSP @parm1, @parm2
If the above does not work or there is a better way to accomplish this goal, please let me know how to change the sql?declare @result varchar(100), @dSQL nvarchar(MAX)
set @dSQL = 'exec @res = TestSP '''+@parm1+''','' '''+@parm2+' '' '
print @dSQL
EXECUTE sp_executesql @dSQL, N'@res varchar(100) OUTPUT', @res = @result OUTPUT
select @result
A complicated way of saying
EXEC @ret = TestSP @parm1, @parm2
SELECT @ret
And not only compliacated, it introduces a window for SQL injection.
Erland Sommarskog, SQL Server MVP, [email protected] -
Calling a stored procedure with RAW and SYS_REFCURSOR
How do you call a stored procedure with the following input and output parameters?
create or replace PROCEDURE test
v_col1 IN NUMBER DEFAULT NULL ,
v_col2 IN VARCHAR2 DEFAULT NULL ,
v_col3 IN RAW DEFAULT NULL ,
v_vol4 IN DATE DEFAULT NULL,
cv_1 IN OUT SYS_REFCURSOR
OPEN cv_1 FOR
SELECT
lv_tmp1 aaaa ,
lv_tmp2 bbbb,
lv_tmp3 cccc
FROM DUAL ;
END;
Edited by: 925963 on Apr 6, 2012 10:50 AMDid you try just declaring the vars?
untested
declare
myCur SYS_REFCURSOR;
myRaw RAW(4);
BEGIN
test (0, 0, myRaw, sysdate, myCur);
END; -
Calling Oracle Stored procedure with OUT parameter from ODI
Hi,
I called an oracle stored procedure with following anonymous block in the ODI procedure.
Declare
Status varchar2(10);
Begin
OTM.DeleteTarget('E_KPI_TARGET_VALUE', Status);
End;
I want to capture the OUT parameter STATUS value in a project level variable.
And based on its va;lue I would like to choose between 2 interfaces in my package.
Please help me in doing this.Hi,
For that kind of situation I commoly use:
1) one step with:
create or replace package <%=odiRef.getSchemaName("W")%>.pck_var
Status varchar2(10);
end;
* transaction 9, for instance
2) step
Begin
OTM.DeleteTarget('E_KPI_TARGET_VALUE', <%=odiRef.getSchemaName("W")%>.pck_var.Status);
End;
* transaction 9
3) then, at an ODI variable, use a refresh like:
select <%=odiRef.getSchemaName("W")%>.pck_var.Status from dual
at same logical shema where the package was created.
Does it make sense to you? -
Calling stored procedure with output parameters in a different schema
I have a simple stored procedure with two parameters:
PROCEDURE Test1(
pOutRecords OUT tCursorRef,
pIdNumber IN NUMBER);
where tCursorRef is REF CURSOR.
(This procedure is part of a package with REF CURSOR declared in there)
And I have two database schemas: AppOwner and AppUser.
The above stored procedure is owned by AppOwner, but I have to execute this stored procedure from AppUser schema. I have created a private synonym and granted the neccessary privileges for AppUser schema to execute the package in the AppUser schema.
When I ran the above procedure from VB using ADO and OraOLEDB.Oracle.1 driver, I got the following error when connecting to the AppUser schema:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'TEST1'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
but when I was connecting to the AppOwner schema, everything is running correctly without errors.
Also, when I switch to the microsoft MSDAORA.1 driver, I can execute the above procedure without any problems even when connecting to the AppUser schema.
I got this error only when I am trying to execute a stored procedure with an output parameter. All other procedures with only input parameters have no problems at all.
Do you know the reason for that? Thanks!If anyone has figured this one out let me know. I'm getting the same problem. Only in my case I've tried both the "OraOLEDB.Oracle" provider and the "MSDAORA" provider and I get an error either way. Also my procedure has 2 in parameters and 1 out parameter. At least now I know I'm not the only one with this issue. :)
'*** the Oracle procedure ***
Create sp_getconfiguration(mygroup in varchar2, myparameter in varchar2, myvalue out varchar2)
AS
rec_config tblconfiguration.configvalue%type;
cursor cur_config is select configvalue from tblconfiguration where configgroup = mygroup and configparameter = myparameter;
begin
open cur_config;
fetch cur_config into rec_config;
close cur_config;
myvalue := rec_config;
end;
'** the ado code ****
dim dbconn as new adodb.connection
dim oCmd as new adodb.connection
dim ors as new adodb.recordset
dbconn.provider = "MSDAORA" 'or dbconn.provider = "OraOLEDB.Oracle"
dbconn.open "Data Source=dahdah;User ID=didi;Password=humdy;PLSQLRSet=1;"
set ocmd.activeconnection = dbconn
cmd.commandtext = "{call fogle.sp_getconfiguration(?,?)}"
'i've also tried creating a public synonym called getconfiguration and just refering to procedure by that.
' "{call getconfiguration(?, ?)}"
' "{call getconfiguration(?,?, {resultset 1, myvalue})}"
'and numerous numerous other combinations
set oPrm = cmd.createparameter("MYGROUP", advarchar, adparaminput, 50, strGrouptoPassIn$)
cmd.parameters.append oPrm
set oPrm = cmd.createParameter("MYPARAMETER", advarchar, adParamInput, 50, strParameterToPassIn$)
cmdParameters.append oPrm
set rs = cmd.execute -
How to use stored procedure with many return results and variable with perl
Hi everybody,
i´m writtting now a Perl programm, wich use a oracle stored procedure with more than 1 result and 1 variable(I have to return 2 variable fpr each result). I don´t now how I can get it.I already search the web but I didn´t find.
My example:
PROCEDURE get_projects_and_sub_projects (
v_project_id IN INTEGER,
v_project_c_id OUT INTEGER,
v_project_id_find OUT VARCHAR2
IS
BEGIN
SELECT c_id, proj_id
INTO
v_project_c_id,
v_project_id_find
FROM t_projet
WHERE t_projet .ksa_pro_art_kbz = 'KU'
AND t_projet.proj_id LIKE v_project_id || '%';
EXCEPTION
WHEN NO_DATA_FOUND
THEN
v_project_c_id := NULL;
v_project_id_find := NULL;
WHEN OTHERS
THEN
kmessages.error (NULL,
'get_projects_and_sub_projects',
'Project-Name: ' || v_project_id,
'Errornumber: '
|| SQLCODE
|| ' Error: '
|| SQLERRM,
TRUE,
TRUE
raise_application_error (-20001,
'Error '
|| SQLCODE
|| ' get_projects_and_sub_projects: '
|| SQLERRM,
TRUE
END get_projects_and_sub_projects;
in Perl Program:
sub get_projects_unterprojects_name($$){
my ($db_handle, $proj_name_id) = @_; #$db_handle ist the DB Connection return value
my $db_proj_c_id;
my $db_proj_name;
eval{ my $csr = $db_handle->prepare(q{
BEGIN
pro_doc_ber.get_projects_and_sub_projects(:proj_name_id, :db_proj_c_id, :db_proj_name);
END;
# parameter value
$csr->bind_param(":proj_name_id", $proj_name_id);
# return values
$csr->bind_param_inout(":db_proj_c_id", \$db_proj_c_id, 11);
$csr->bind_param_inout(":db_proj_name", \$db_proj_name, 20);
$csr->execute(); };
But this didn´t work. Could somebody give me some idea?
Thank you
FelxSome additional info would probably be helpful.
What is your programming enviironment? Java?
In any case I suspect that you will need to use the OCI to deal with specific Oracle types such as user defined object types -- thats not standard ANSI SQL.
In Java I believe you need to use OPAQUE, there are some examples out there. I'm mostly a PL/SQL developer with some Java expereince so others here are more qualifed to answer your question more directly.
Maybe you are looking for
-
I have a month old HP Pavillion 23 with Windows 8.1. About 2 weeks ago an icon that looks like a volume guage appeared on the upper left side of the screen on the desktop and it stays on every application I open. If I clck on it, the purple guage g
-
How can I make multi-'pushViewController' for severals for buutons?
Hey all, I'm pretty new on Obj-C programing, and I'm learning from Stanford's videos courses. Right now, I'm 'playing' with the navigation option. I use this action: [Code] - (IBAction)pushViewController:(id)sender{} [Code] In order to connect, in IB
-
What aspects of MM does SD person need to know?
Hi Experts, Is it common for employers to demand SD person do MM? If so, what aspects of MM is practically need to know by SD person? To me, it would be the following, please feel free to add to the list and briefly describe. 1. MMBE check stock qty.
-
SQL Server 2012 PDW - Controling the physical location of a data partition
In PDW for distributed tables, is it possible to know/control which partition will reside in which storage node? Assuming I have 4 compute nodes, and I have data with partitions A, B, C and D (all tables will have only 4 partitions), can I design in
-
ERROR WITH ITUNES SETUP ASSISTANT
My iTunes got corrupted and I had to delete and re-install, when I did that I now get the Setup assistant every time I click on iTunes. I attempted going to my preferences to see if there was anyway to remove but unable to locate. Also, any changes I