StoreE TV - How to use FAT32 format?

Hi, I have a store tv external HDD and I have a dude.
For some reasons I need to format the HDD to FAT32 format. So I want to know if I supously format HDD I will loose the system to play multimedia files or the system is installed on a hidden partition. Its only temporaly the format, but I'm affraid to loose the multimedia system.
Thx

Hi buddy,
I assume you are NFTS at the moment Right?
As far as I know you must format the whole HDD that you can use FAT32 file system. A conversion to FAT32 without loosing data is not possible but Im not 100% sure.
So just backup the files on another hard drive and format the StoreE TV for using FAT32.

Similar Messages

  • How to use string format in TextInput?

    How to use string format in TextInput?
    Ex.
    HH:MM:SS when typing message appear in 12:34:56 form.
    N,NNN when typing message appear in 1,234,567 form.

    look up for "Using formatters" in the FB help.
    Essentially you'll instantiate a format, NumberFormatter for
    numbers for example, and set it's properties like e.g. showing a
    thousand separator and then one some event of the TextInput --
    valueCommit for example -- you'll do something like:
    ti.text = nf.format(ti.text)
    this is would also give you opportunity to validate user
    input using the same formatter and valid event.
    ATTA

  • How to use CSV format in making a data connection.

    Hello All,
    I have got a form to develop. There are over 1000 entries to be imported. Can I use CSV format to embed those data in the forms. Mainly those data would be embedded as dropdowns.If I can use how to do it ? If i can not use is there any better way without using the Database like MySQL or something.
    Thanks.
    Bibhu.

    Hi Afroz,
    To be more specific, if the csv file doesn't has header, please refer to this script to add header:
    $csv = Import-Csv d:\haha.csv -Header "UserA","UserXYZ","EmailA"
    Then you can loop this csv file to run the "add-mailboxpermission" cmdlet, I recommend you can test this script before running against production environment, please also note I haven't tested this script:
    $csv = Import-Csv d:\users.csv -Header "UserA","UserXYZ","EmailA"
    foreach($each in $csv){
    write-host "assign fullaccess permission of user $($each.UserXYZ) on mailbox $($each.EmailA)"
    get-mailbox -identity $each.EmailA | add-mailboxpermission -user $each.UserXYZ -accessrights 'fullaccess'
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to use currency format set

    Hi All,
    I have to use currency format set to mask the amount values to their respective currencies ,
    i reviewed the Oracle XML Publisher Administration and Developer's Guide and followed all the steps mentioned there ,i m also quoting the same over here
    To define a Currency Format Set:
    1. Navigate to the Currencies page under the Administration tab. Select Create
    Currency Format Set.
    2. Enter a Name and a Code for the set. The Code is a unique identifier and cannot be
    changed later. Select Apply.
    3. The Currency Formats page will display for your newly created set.
    To add currency formats to the Currency Format Set:
    1. Select Add Currency Format to add a format to your set.
    2. Select a Currency Name from the list.
    Note: This list is generated from the FND currency table and
    should include all ISO currencies. Additional currencies can be
    added from the System Administrator responsibility.
    3. Enter the Format Mask you wish to use for this currency and select Apply.
    The Format Mask must be in the Oracle number format. The Oracle number format
    uses the components "9", "0", "D", and "G" to compose the format, for example:
    9G999D00 where
    9 represents a displayed number only if present in data
    G represents the group separator
    D represents the decimal separator
    0 represents an explicitly displayed number regardless of incoming data
    See Using the Oracle Format Mask, Oracle XML Publisher Report Designer's Guide for
    more information about these format mask components.
    After a currency format has been created, you can update or delete it from the Currency
    Formats page.
    i followed all the above step ,i need to use germany currency ,i have also used the format-currency command in my RTF template,but still its not working ,i used 9G999D00 for masking .
    Any hint would be very helpful ,thanks in advance .Please let me know if my question is not clear
    Thanks
    Pratap

    hi all
    Thanks ,this is resolved ,i just missed clearing cache ,after clearing the cache its working .
    thanks
    Pratap

  • How to use multiple formats in one JFormattedTextField

    Hi,
    I am looking for a way to allow multiple formats in the same JFormattedTextField. Let's say I want to allow input like:
    a) 123-AB-123
    and
    b) AB-12345-CD
    Of course I could use an InputVerifier of my own combined with regular expressions to see if the input matches. But I like the way JFormattedTextField supports the UserInput by displaying a Placeholder String. So the User sees what the input might look like.
    I'd tried to write a FormatterFactory of my own, which will return either a MaskFormatter for a) or b) but the JFormattedTextField checks out the Formatter only when gaining or loosing focus. What should happen is that it checks out the formatter after each keystroke.
    Does anyone know a solution for this or how I could force the FormattedTextField to REget it's formatter?
    Thanks
    Thimo

    Check out the following; it provides code for a regular expression formatter:
    http://java.sun.com/products/jfc/tsc/articles/reftf/
    Unfortunately, this does not support the 'placeholder' notion like the MaskFormatter does, if that's what you were talking about. I'm not sure how you could cobble them together, since with the MaskFormatter you don't have to type the mask literal characters, but you would need to with the regular expression.
    : jay

  • How to use quarter format in "to_date()" function?

    Hi,
    I'm trying to use to_date() function with quarter format. How do I specify the format?
    For example to convert '2002 quarter 1' using the to_date function.
    I tried to_date('20021', 'YYYYQ'), and I got ORA-01820 cannot appear in date input format.
    Please help, thank you!!!

    You cannot use Q when inputting data, only when retrieving data. When inputting, you must enter a valid date. Oracle has to store a date and if you just enter a quarter, it can't figure out what date to store. See the examples below:
    SQL> -- test table:
    SQL> CREATE TABLE test_table
      2    (test_date DATE)
      3  /
    Table created.
    SQL> -- the wrong way to input:
    SQL> INSERT INTO test_table (test_date)
      2  VALUES (TO_DATE ('2002-1', 'YYYY-Q'))
      3  /
    VALUES (TO_DATE ('2002-1', 'YYYY-Q'))
    ERROR at line 2:
    ORA-01820: format code cannot appear in date input format
    SQL> -- the right way to input:
    SQL> INSERT INTO test_table (test_date)
      2  VALUES (TO_DATE ('27-OCT-2002', 'DD-MON-YYYY'))
      3  /
    1 row created.
    SQL> -- to output:
    SQL> COLUMN "Year and Quarter" FORMAT A16
    SQL> SELECT test_date,
      2         TO_CHAR (test_date, 'YYYY-Q') AS "Year and Quarter"
      3  FROM   test_table
      4  /
    TEST_DATE   Year and Quarter
    27-OCT-2002 2002-4
    1 row selected.

  • How to use many format data into a template?

    How to design a template but it can interface from many format data? 

    This is the one from 2010 but should still work.
    http://www.bfcnetworks.com/blogs/alexpearce/pull-sharepoint-2010-document-properties-into-word-quick-parts/
     You basically create a new document in the library (must have the columns you want into the word document), then you use the Quick
    Parts to insert the data where needed. Then you save this document as your template. Then anytime someone creates a document in the library when you open the document it will read from the columns of the item.
    I used a workflow and had the users actually update a SharePoint list, then that in turn creates a new document in the document library and populate the columns from the list form. Then You can send that document link to folks to download / print or whatever.
    Is that what you are talking about?

  • How do use different formatting for a distinct "Section"

    I have experienced formatting problems with an older document after upgrading to Pages 2.
    There was a distinct "section" within that document with a different "top" and "bottom" border. I find myself unable to change the top and bottom borders within just the Section I want to revise. When I try dragging the ruler on the page in question, it changes the settings for the entire document.
    Questions:
    (1) How do I ensure that one of my document's pages is, in fact, a distinct Section with its own formatting?
    (2) How can I change the page setup of that Section independently of the rest of the document?
    PowerMac G5 dual 2.0   Mac OS X (10.4.4)  

    Hello David,
    now I'm back for your problem. You are right: the settings "Before" and "After" of the Layout Inspector are only for the areas at the Layout Breaks unlike the "Left" and "Right" number fields. If you have long Sections you have to use a workaround.
    You have to insert a placeholder at the top and at the bottom of the pages to "simulate" the wider margins. But don't be frightened, you don't have to do it for every page. For that, Pages has the Section Master.
    If you have a "Facing Pages" document, place rectangles (the placeholders) with no outline and with no filling at the top and at the bottom of a left and a right page. This rectangles should be adjusted in that way, so they have the same width like the text area and the same height you want to have for the wider Margins. Give the placeholder the "Fixed on page" setting in the Wrap Inspector and no "Extra Space". If you have a none "Facing Pages" document, you have to position the placeholder only on the top and the bottom of one page. Please notice the settings "First page is different" and "Left and right pages are different" of the Layout Inspector.
    After you have placed the rectangles, select them and choose the menu item "Format/Advanced/Move Object to Section Master". Now you have the space at the top and the bottom of every page in that Section. Only the Section with the oversized images may not have the placeholders.
    Excuse me, that I haven't mentioned the workaround the first time, but to write the Layout Border thing. I have forgotten that only the "Left" and "Right" border settings are for all pages.
    Frank.

  • How to use Windows formatted iPod nano to move music to a new Mac?

    Hi all,
    I need to transfer my iPhone's musics, songs, apps and photo, etc to the Mac and I came across this http://support.apple.com/kb/HT1329" guide at Apple Support site since I owned a iPod nano.
    My questions is since my iPod nano is configured for Windows will the Mac be able to read it since it's stated clearly in the guide "While a Windows formatted iPod may work on a Mac, Apple supports this configuration only with iPod shuffle."
    If I follow through the guide, 1. Switch the iPod to manual update and enable disk use, 2. Locating and consolidating the iTunes Media folder, 3. Copy iTunes folder to iPod. I will still need to restore the iPod to work in Mac and end up nothing left inside meaning songs, photo all erased.
    Also, anyone using third party software like http://www.fadingred.com/senuti/ Can advise if it's good to use this? And if iPod nano configured for Windows can works with this?
    Need other more solution other this to transfer the mentioned data to Mac.
    Thanks.

    darrengbl wrote:
    I need to transfer my iPhone's musics, songs, apps and photo, etc to the Mac […] since I owned a iPod nano.
    iPhone… iPod… iPod Nano… which one it is? You are trying to transfer music from what source, using what medium, and to what target?
    I came across this http://support.apple.com/kb/HT1329"
    it's stated clearly in the guide "While a Windows formatted iPod may work on a Mac, Apple supports this configuration only with iPod shuffle."
    Where exactly is this stated? I am unable to find this statement in the KB article you mentioned. And are you talking iPhone or iPod? This KB article applies only to iPod.

  • Question regarding how to use XHTML format in Form

    I have defined a form where the input interface is iv_text TYPE string and the format of the field in the form is in XHTML.
    But when I set iv_text = '<font face="Times New Roman" color="#ff0000" size="5">Test</font>'. The ADS does not interpret the XHTML and it generates me a PDF file containing this sentence.
    Can someone help me?

    look up for "Using formatters" in the FB help.
    Essentially you'll instantiate a format, NumberFormatter for
    numbers for example, and set it's properties like e.g. showing a
    thousand separator and then one some event of the TextInput --
    valueCommit for example -- you'll do something like:
    ti.text = nf.format(ti.text)
    this is would also give you opportunity to validate user
    input using the same formatter and valid event.
    ATTA

  • How to use MD5 format of string

    i want to change a password string to md5 format
    how can i do it

    http://www.twmacinta.com/myjava/fast_md5.php

  • How to use Time Format with decimal to calculate races cars. ss,ddd ?

    In excell there are a user defined format MM:SS.000 very convenient to use in races with decimal precision.
    So in a race car we can have lap times like
    Car 1 - 1:23.234
    Car 2 - 1:23.132
    so the diference can be calculate and the result is 0.102.
    But in NUMBERS therer are no way to use with this precision.
    Somebidy has the same problem?

    Hi hi ni,
    I'm not sure if I understood you, but you can try doing this.
    Create a variable for 0calyear. The user will input the year.
    In the report you use this:
    0calmonth - NumberOfEmployeesKF
    If the user enters 2008, then it will show:
    01.2008 - nnn
    02.2008 - xxx
    03.2008 - zzz
    Hope this helps.
    Regards,
    Diego

  • How to use Mac formatted ipod in windows

    Hey all,
    I'm trying to transfer files i backed up to my ipod to my windows laptop but it's asking me to format the ipod first correct me if im wrong but won't that wipe out all the info in the ipod and if so is there a work around i wanna transfer docs/pics/tunes to my pc as my mac is in for repairs. Any thoughts?

    If you need to use a Mac (HFS+) formatted iPod on a Windows PC, you'll need to install some 3rd party software such as XPlay 2.0 (which you can get from MediaFour Software). This will enable your Windows PC to read a Mac-formatted iPod.

  • How to use the FORMAT property of an account dimension

    Hi Experts,
    I tried my best but I just can't find any information about the format property of an account dimension. I know that it is a reserved one and I have seen something such as #,##0. In detail I want inc member to look like 1.000.000 and exp member  like -4.000.0000.
    This is probably a stupid question.
    Thanx in advance,
    Cora

    Hi Cora-
    These are Excel custom formats..please review the following link for detailed information:
    [Custom Number Formats in Excel|http://www.ozgrid.com/Excel/CustomFormats.htm]
    For your specific example:  ###,###,### for INC and  -###,###,### EXP should be sufficient.
    Regards,
    Sheldon

  • How to use FM format element in number format model

    Dear all,
    Could anybody explain what is FM format element for in number format model? I read the documentation, it doesn't show a clear description as it those in Datetime Format Model section.
    regards,
    Valerie

    It works mopre or less the same for numbers as for dates:
    SQL> -- generating some numbers:
    SQL> with t as (
      2  select level n
      3  from   dual
      4  connect by level <= 10
      5  )
      6  --
      7  -- actual query:
      8  --
      9  select n
    10  ,      '*'||to_char(n, '09')||'*' nofm
    11  ,      '*'||to_char(n, 'fm09')||'*' fm
    12  ,      length(to_char(n, '09')) lnofm
    13  ,      length(to_char(n, 'fm09')) lfm
    14  from   t;
             N NOFM            FM                   LNOFM        LFM
             1 * 01*           *01*                     3          2
             2 * 02*           *02*                     3          2
             3 * 03*           *03*                     3          2
             4 * 04*           *04*                     3          2
             5 * 05*           *05*                     3          2
             6 * 06*           *06*                     3          2
             7 * 07*           *07*                     3          2
             8 * 08*           *08*                     3          2
             9 * 09*           *09*                     3          2
            10 * 10*           *10*                     3          2
    10 rows selected.As you can see, the leading spaces are trimmed.

Maybe you are looking for