Storing data in the fields during the transition back and forth

How to make the transition within the tab back and forth, the page is not updated, and the data saved in the fields? Caching enabled, but its not work, or after Opera I think that the cache should work differently. There's all the data stored in the transition. Its not auto fill when typing in the field, or by using the wand passwords. Data in the field is only stored until update the page. In fact, you can only go back on any number of levels of your history, and then return to the past and the data fields will be the same. So in the 12x version of Opera
I hope clearly explained

''yozuul [[#question-1051752|said]]''
<blockquote>
I hope clearly explained
</blockquote>
Not really. Are you trying to say you are typing on a web page, but what
you typed does not show up on the page?
What is the site and public web address?
Security Issue: Update your Flash Player '''Version 17.0.0.134<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Similar Messages

Scan scan bar on the printer is continuously moving back and forth.

The printer is connected via USB to a computer using Vista and also used remotely by a MAC, IPad, and IPhones.
The scan bar on the printer is continuously moving back and forth, I ran the HP Print Scan Doctor and it found no problem.
I can print, copy, and scan but the motion of this piece on the device will not stop.
No change to the issue occurred when I turned the printer off, waited several hours, and turned it back on.

Hi @GGx3,
Welcome to the HP Forums!
I noticed that the scan bar on your HP Officejet pro 6830 printer is continuously moving back and forth. I am happy to look into this scanning issue for you!
First, I would recommend a hard reset, by going to this post, How to perform a Hard Reset, by @Rich1. it is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Please, see this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
After the hard reset, I would go through this guide, The HP Printer Does Not Turn On or Respond When the Power Button is Pressed, and watch this video:
(Even though the guide title may not match your issue, I believe the solutions will help.)
The last step I would do is to also make sure your printer's firmware is up-to-date. Getting Printer Updates for HP Officejet 6810 and Officejet Pro 6830 e-All-in-One Printer Series.
Hope this solves your problem, and have a good day!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My 27" iMAC is less than 3 month old. Many times regardless of what application I am in the screen will start shifting back and forth left to right. Then I can't do anything until the screen stabilizes. This takes anywhere from 5 to 25 secs. Any ideas?

My 27" iMAC is less than 3 month old. Many times regardless of what application I am in the screen will start shifting back and forth left to right. Then I can't do anything until the screen stabilizes. This takes anywhere from 5 to 25 secs. Any ideas?

why don't you take advantage of the free 90 days of AppleCare and utilize the free, professional telephone support from Apple instead of asking in the forums?

CIC0- Add Date of Birth Field in the BP Search,

Hi,
Please do let me know the procedure for adding the Date of Birth Field in the BP Search of Interaction Client Center.
I have activated the Field BP1_BIRTHDATE in the CRMC_CIC_SEARCH_CNTR,
and i have changed the Layout of the HTML Page via the Transaction SMW0 in the SAP WebRepository in the CRM_CIC_COMPONENTS package.
Now im able to find the Date of Birth Field in the CIC0 but while i'm trying to search based in the Date Of Birth field it is not working it.
Please do suggest me what i have to do.
Anilkumar.

How can you expect to search on DOB basis if its not suported at the BOL level. Make sure the business logic is written to carry out search on DOB basis.
You need to enahcne the already exsiting search code to support search on date of birth basis.
<b>Reward Points if useful</b>

Debugger Problem: Full data is not displayed in the fields of the ITAB

Hi Guys,
I am having a problem related to ABAP Debugger. Data is not fully displayed in all the field of the internal table. I am using SAPGUI 640 with ECC6. In the debugger I have increased the width (size) of the column but still data is not fully displayed.
Below is the example:
*Actual Data*        *Displayed As*
1141               11...
P42X13             P...
Testing            Tes...
When I bring the curson on the displayed incomplete data, the full data is shown in small popup window.
I have increase the size of the column but still it is not showing the complete data.
I have to download the internal table data to an excel spreadsheet to view the complete data.
Please help.
Thanks,
mini

I cannot use SAPGUI 710 as my company is not upgrading it to 710. We have to live with 640 for now.
SAPGUI details are as follows:
Name............: saplgpad.exe
Description.....: SAP Logon Pad for Windows
Product version.: 640 Final Release
File version....: 6405.5.21.1020
Build number....: 855417
Please help if you can. This is very frustrating.
Thanks.

I am looking for a way to enter multiple dates into a field without the form becoming too long.

I am looking for a way to enter multiple dates into a field without the form becoming too long.
This will be used by an old school bookeeper who needs the form to fit on one page.
Any ideas?

Hi,
If you don't need the field to provide a date picker, verify it's a date, or don't need to sort the dates in the table, you can just use a text area field, and have your form filler enter the dates comma separated. Otherwise you'd have to add multiple fields. However, you can lessen the space each field takes up veritically, by using the "Labels Left" option (in the toolbar).
Thanks,
Todd

Assignment of the asset during the equipment creation

Hello everyone,
I am currently working on the PM-AA interface which consists in linking the asset field (ITOB-ANLNR) of an equipment with the asset number given in the purchase order. The goods receipt (MIGO) creates automatically an equipment (thanks to the serial number profile of the materiel).
As the purchase order contains the asset, I expected that the system would put this value in the corresponding field of the equipment.
In the customizing, we have made the following changes :
- equipment is modified synchronously with tha asset modification
- the assignment of master data fields of assets and equipment includes the asset fields itself
- the serial number profile is assigned to the material and allow the creation of the equipment during the goods receipt.
Has someone already experienced this case? What do I have to do to have the asset number saved in the equipment during its creation?

Hi Paul,
Thanks for you answer.
I've already checked these customizing aspects but tjey are not saisfying enough : my customer wants the equipment to be created at the goods receipts in order to save the serial number registered during the reception.
Furthermore, I'm not sure of the process if I create the equipment formerly : will it take into account the material and serial number that are given during the reception of the goods? And how does the system react with more than one equipment?

Modelling the fields in the cube from different source system.......

Hi,
I need to create one query on the cube.
User want some of the fields in the query which are present in diffrent source system , rest of the fields are present in the cube.
These are master data fields ( 7 fields in total) from other source system.
Cube gets data from one ODS.
some steps I need to do are :
1) create new source system
2) Create corresponding objects in BW.
3) Model the things in ODS and cube
Can somebody let me know what is the best way/steps to model such scenario.
Thanks, Jeetu

Hi,
Replicate both the data sources to BW.
Create 2 infosources/transformations, map them to respective fields and infoobjects.
Now assign them to cube and load the data
hope this helps.
Rgs,
I.R.K

To edit the field in the ALV report

Hi,
    i want to edit the field of the ALV report what i need to do for that..
Thanks & Regards
Ashu Singh

hi,
check the code,
REPORT zalv_fcat.* Output table T006 structure declarationTYPES : BEGIN OF ty_t006.
        INCLUDE STRUCTURE t006.
TYPES : END OF ty_t006.*Internal table and wa declaration for T006
DATA : it_t006 TYPE STANDARD TABLE OF ty_t006,
       wa_t006 TYPE ty_t006.*declarations for ALV
DATA: ok_code               TYPE sy-ucomm,
fieldcatalog for T006
      it_fielcat           TYPE lvc_t_fcat,
fieldcatalog for fieldcatalog itself:
      it_fielcatalogue           TYPE lvc_t_fcat,
      it_layout           TYPE lvc_s_layo.*declaration for toolbar function
DATA:   it_excl_func        TYPE ui_functions.
Controls to display it_t006 and corresponding fieldcatalog
DATA: cont_dock TYPE REF TO cl_gui_docking_container,
      cont_alvgd     TYPE REF TO cl_gui_alv_grid.*controls to display the fieldcatalog as editable alv grid and container
DATA: cont_cust TYPE REF TO cl_gui_custom_container,
      cont_editalvgd     TYPE REF TO cl_gui_alv_grid.*intialization event
INITIALIZATION.*start of selection event
START-OF-SELECTION.
LOCAL CLASS Definition for data changed in fieldcatalog ALV
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS handle_data_changed
      FOR EVENT data_changed OF cl_gui_alv_grid
      IMPORTING er_data_changed.
ENDCLASS.                    "lcl_event_receiver DEFINITION
LOCAL CLASS implementation for data changed in fieldcatalog ALV
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
ENDMETHOD.                    "handle_data_changed
ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION*data declaration for event receiver
DATA: event_receiver TYPE REF TO lcl_event_receiver.*end of selection event
END-OF-SELECTION.*setting the screen for alv output for table display and
*changed fieldcatalalogue display
SET SCREEN 600.
On this statement double click it takes you to the screen painter SE51. Enter the attributes
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
*Go to SE41 and create status 'STATUS600' and create THE function code 'SUBMIT'
*and 'EXIT' with icons and icon texts
Also create a TitleBar 'TITLE600' and give the relevant title.&----
*&      Module STATUS_0600 OUTPUT
MODULE status_0600 OUTPUT.
SET PF-STATUS 'STATUS600'.
SET TITLEBAR 'TITLE600'.
CREATE ALV GRID CONTROL IF DOES NOT EXISTS INITIALLY
IF cont_dock IS INITIAL.
    PERFORM create_alv.
ENDIF.ENDMODULE.                             " STATUS_0600 OUTPUT* PAI module of the screen created. In case we use an interactive ALV or
*for additional functionalities we can create OK codes and based on the
*user command we can do the coding as shown below
*&      Module USER_COMMAND_0600 INPUT
MODULE user_command_0600 INPUT.
CASE ok_code.
    WHEN 'SUBMIT'.
*TO GET THE CURRENT FIELDCATALOGUE FROM THE FRONTEND
      CALL METHOD cont_alvgd->set_frontend_fieldcatalog
        EXPORTING
          it_fieldcatalog = it_fielcat.
*refresh the alv
      CALL METHOD cont_alvgd->refresh_table_display.
*to Send Buffered Automation Queue to Frontend
      CALL METHOD cl_gui_cfw=>flush.*Exit button clicked to leave the program
    WHEN 'EXIT'.
      LEAVE PROGRAM. ENDCASE.ENDMODULE.                             " USER_COMMAND_0600 INPUT&----
*&      Form CREATE_ALV
&----FORM create_alv.*create a docking container and dock the control at the botton
CREATE OBJECT cont_dock
      EXPORTING
           dynnr = '600'
           extension = 100
           side = cl_gui_docking_container=>dock_at_bottom.*create the alv grid for display the table
CREATE OBJECT cont_alvgd
      EXPORTING
           i_parent = cont_dock.*create custome container for alv
CREATE OBJECT cont_cust
      EXPORTING
           container_name = 'CCONT'.
*create alv editable grid
CREATE OBJECT cont_editalvgd
      EXPORTING
           i_parent = cont_cust.* register events for the editable alv
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_data_changed FOR cont_editalvgd. CALL METHOD cont_editalvgd->register_edit_event
    EXPORTING
      i_event_id = cl_gui_alv_grid=>mc_evt_modified.*building the fieldcatalogue for the initial display
PERFORM build_fieldcat CHANGING it_fielcat it_fielcatalogue.*building the fieldcatalogue after the user has changed it
PERFORM change_fieldcat CHANGING it_fielcatalogue.*fetch data from the table
PERFORM fetch_data.*    Get excluding functions for the alv editable tool bar APPEND cl_gui_alv_grid=>mc_fc_loc_append_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_insert_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_cut TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_asc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_dsc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_subtot TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_graph TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_info TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_print TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_filter TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_views TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_export TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_paste TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_find TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_copy TO it_excl_func.
*Alv display for the T006 table at the bottom
CALL METHOD cont_alvgd->set_table_for_first_display
    CHANGING
      it_outtab       = it_t006[]
      it_fieldcatalog = it_fielcat[].
optimize column width of grid displaying fieldcatalog
it_layout-cwidth_opt = 'X'.* Get fieldcatalog of table T006 - alv might have
modified it after passing.
CALL METHOD cont_alvgd->get_frontend_fieldcatalog
    IMPORTING
      et_fieldcatalog = it_fielcat[].to Send Buffered Automation Queue to Frontend CALL METHOD cl_gui_cfw=>flush. Display fieldcatalog of table T006 in editable alv grid
CALL METHOD cont_editalvgd->set_table_for_first_display
    EXPORTING
      is_layout            = it_layout
      it_toolbar_excluding = it_excl_func
    CHANGING
      it_outtab            = it_fielcat[]
      it_fieldcatalog      = it_fielcatalogue[].
ENDFORM.                               " CREATE_alv
*&      Form fetch_data
FORM fetch_data.* select data of T006
SELECT * FROM t006 INTO TABLE it_t006 UP TO 50 ROWS.
ENDFORM.                               " fetch_data
*&      Form BUILD_FIELDCAT
FORM build_fieldcat CHANGING it_fldcat TYPE lvc_t_fcat
                                   it_fcat TYPE lvc_t_fcat.
Fieldcatalog for table T006: it_fldcat
to generate the fields automatically CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'T006'
    CHANGING
      ct_fieldcat            = it_fldcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.*----
Fieldcatalog for table LVC_T_FCAT:it_fcat
Generate fieldcatalog of fieldcatalog structure.
This fieldcatalog is used to display fieldcatalog 'it_fldcat'
on the top of the screen. CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'LVC_S_FCAT'
    CHANGING
      ct_fieldcat            = it_fcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                               " BUILD_FIELDCAT
*&      Form CHANGE_FIELDCAT
*after the user has modified the fieldcatalogue we build another fieldcat
*for the modified alv display
FORM change_fieldcat CHANGING it_fcat TYPE lvc_t_fcat. DATA ls_fcat TYPE lvc_s_fcat. LOOP AT it_fcat INTO ls_fcat.
    ls_fcat-coltext = ls_fcat-fieldname.
    ls_fcat-edit = 'X'.    IF ls_fcat-fieldname = 'COL_POS' OR ls_fcat-fieldname = 'FIELDNAME'.
      ls_fcat-key = 'X'.
    ENDIF.    MODIFY it_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM.                               " CHANGE_FIELDCAT
ref:saptechnical tutorial.
Regards,
Anirban

Dear freinds how to open the fields in the PNP selection screen

Dear Freinds,
         When you use the PNP selection screen , i dont find the Orgeh field in default selection screen .
However , using the code at selection screen output i have closed certain feilds using the loop at screen,
but when iam trying in similar way to show the field
on the selection what is the code i have to use
in the loop at screen...........especially for the field
orgeh .
i have tried the othere options like required.........this working when iam able to make the date fields mandatory, similary i want to try with the below
code to get the field Orgeh on the selection as default feild when we execute the report.
can any one please modify me the code
LOOP AT SCREEN.
    IF screen-group4 = '026'   .
      screen-active = 0.
      screen-invisible = 1.
       screen-input = 0.
    ENDIF.
    modify screen.
endloop.
what i have to use in the loop at screen for me to get the orgeh field on the selection screen.
thanks & regards
madhuri

Hi Madhuri,
Unless you dont declare the orgeh field in hr report category you cannot show it on the selection screen nor you can hide it.
If you do not want to use hr report cateogry.
What you can do is that declare a parameter or selection screen called p_orgeh type orgeh.
Here you can do the hiding on conditions.
Kindly note here that after get pernr you will have to put a check that
check p0001-orgeh in p_orgeh.
Because for the fields declared by you automatic filtering does not happen.
Regards,
Divya
Pts valuable.

Field Name of the field on the Selectiion Screen

Hi,
I am executing report program and we get a Selection Screen .The question is can we catch the field names of the fields on the selection screen dynamically.
We can find the field name by pressing F1 and looking into the Technical Information of that perticular field.
But can we fetch the field name dynamically.
Any pointers/information in this regard will be highly helpful.
Thanks & regards,
Abhijeet

Hello Abhijeet,
Here's what I think you're looking for -
tables spfli.
parameters     : p_test   like spfli-carrid.
select-options : s_carrid for spfli-connid.
DATA:
descr_ref TYPE ref to cl_abap_elemdescr.
START-OF-SELECTION.
descr_ref ?= cl_abap_typedescr=>describe_by_data( p_test ).
WRITE: / 'Typename     :', descr_ref->absolute_name.
WRITE: / 'Kind         :', descr_ref->type_kind.
WRITE: / 'Length       :', descr_ref->length.
WRITE: / 'Decimals     :', descr_ref->decimals.
WRITE: / 'Output Length:', descr_ref->output_length.
WRITE: / 'Help ID      :', descr_ref->help_id.
Kind------> data type (C , I , etc.,)
Help ID---> data element (usually).
There are other classes in ABAP of the form CLABAPDESCR which can provide you with other information. These classes all belong to what is called RTTI (Run Time Type Identification). However, these are available only from 46c. You can explore the other classes, as I think they would be very interesting and useful in the future.
Regards,
Anand Mandalika.

Server:An Error occurred in the container during the request processing

Hi
I am using tomcat 5.0 as for my serlvets. I get below exception when processing a request. Please let me know under what conditions do we get such exception
2008-5-14 9:33:34 org.apache.coyote.tomcat5.CoyoteAdapter service
Server:An exception or error occurred in the container during the request processing
java.lang.NullPointerException
at org.apache.tomcat.util.buf.MessageBytes.toChars(MessageBytes.java:245)
at org.apache.tomcat.util.http.mapper.Mapper.map(Mapper.java:509)
at org.apache.coyote.tomcat5.CoyoteAdapter.postParseRequest(CoyoteAdapter.java:279)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:158)
at org.apache.jk.server.JKCoyoteHandler.invoke(JKCoyoteHandler.java:300)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
at org.apache.jk.common.ChannelSocke.processConnection(ChannelSocket.java:675)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:619)
Thanks
fangbinyu

This might help (then again, it might not!):
Here is your stack trace:
2008-5-14 9:33:34 org.apache.coyote.tomcat5.CoyoteAdapter service
Server:An exception or error occurred in the container during the request processing
java.lang.NullPointerException
at org.apache.tomcat.util.buf.MessageBytes.toChars(MessageBytes.java:245)
at org.apache.tomcat.util.http.mapper.Mapper.map(Mapper.java:509)
at org.apache.coyote.tomcat5.CoyoteAdapter.postParseRequest(CoyoteAdapter.java:279)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:158)
at org.apache.jk.server.JKCoyoteHandler.invoke(JKCoyoteHandler.java:300)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
at org.apache.jk.common.ChannelSocke.processConnection(ChannelSocket.java:675)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:619)
Do you see any class name in it that you created? If so, look into that class and either set breakpoints and step through it until an exception is thrown, or fill it with System.out.println() statements to see where it failed.
If none of the items above is a class you created, I suspect its the vendor classes that failed due to them trying to configure themselves via various configuration files in the project (usually *.xml files). Check out your *.xml files for snytax error and/or incorrect configurations and/or missing configuration info. Null pointer exception means the vendor software went to call a function of a class that was not instansiated. Example: person.getName() will throw that type of error if person is null.
If you still cant find the problem, you might try creating a simple project and add configuration info to it, get it to work, then add more configuration data, get it to work, etc until you duplicate your original project configuration setup. This way, you can isolate where the problem is.

Possibele entries are not populating for the fields on the selection screen

Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.

Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali

Drop down in the selection for the field from the table

Hi.
i want to put the drop down for the field from the table fo which i dont know the number of entries for the field zregion1 of the table zbwcntry.
please tell me how to use the function module and what could be the line of codes.
the drop down is for the select option on the slection screen of the classical report.
please help .

HI,
Check below code..it may help you.
REPORT Zbunu .
TYPES :BEGIN OF STR ,
       MATNR TYPE MATNR ,
       END OF STR .
DATA : ITAB TYPE TABLE OF STR WITH HEADER LINE,
       VAR TYPE MARA-MATNR .
PARAMETERS : S_MATNR TYPE MATNR ,
              P_MATNR TYPE MATNR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_MATNR .
SELECT MATNR FROM MARA INTO
CORRESPONDING FIELDS OF TABLE ITAB UP TO 1000 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE         = ' '
    retfield               = 'MATNR'
PVALKEY                = ' '
   DYNPPROG               = SY-CPROG
   DYNPNR                 = SY-DYNNR
   DYNPROFIELD            = 'S_MATNR'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
   VALUE_ORG              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = 'X'
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
tables
    value_tab              = ITAB
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
   PARAMETER_ERROR        = 1
   NO_VALUES_FOUND        = 2
   OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Ansumesh

Field catalog does not agree with the fields of the functional area

G'day everyone,
I am using a generic extractor via infoset to extract data from R/3 source system.
Using RSA3, I have obtained an error message and no further details.
****ERROR MESSAGE
"Field catalog does not agree with the fields of the functional area
Message no. RSUQ134
****ERROR MESSAGE
I have checked and adjusted my infoset in SQ02 and they seems fine but still obtain the same error.
In BW, replicated the datasource and activate the transfer rules but still obtain the same error.
Anyone knows how to get more details for this type of error? Or how to fix this problem?
Regards
Wayne

I think I have just solved it.
Transaction RS02 delete and recreate after checking the structure in BW and Source system are the same.
Cheers

Storing data in the fields during the transition back and forth

Similar Messages

Maybe you are looking for