Storing form information using cfm and sending attachments in email

Hi. I am trying to have an email automatically sent to me when an html form is completed and also include an attachment that the user has attached when they hit submit. But whhen I go to run it, I get no errors however I don't even get the email. So I can't debug because there is no way to set breakpoints in dreamweaver. Here are parts of my .cfm code. Thanks for your help in advanced.
<CFMAIL TO=....my code>
Data entered through form
Date: #form.Date#
Name: #form.Name#
<cffile
action="UPLOAD"
fileField="form.datafile"
destination="#GetTempDirectory()#"
nameconflict="MAKEUNIQUE"
/>
<cfmailparam file="#form.datafile#" disposition="attachment" type="text">
</CFMAIL>

Shilpa,
Refer to [this|http://www.jguru.com/faq/view.jsp?EID=30251] link. It mentions that you have to use the absolute file path. I would suggest that you try using a simpler path where the path does not contain spaces.
Thanks,
GLM

Similar Messages

How to use rule and send the same email to multiple recipents

Hi,
My requirement is to send the workitem to the multiple recipents. one of my reiend suggest me to use the rule but i don't know how to use that .
can any one of you suggest me how to use rule in workflow.
Also i want to send the same email to multiple recipent .how can i do it by using the multiline variable...please advice me with example if possible..
Note :- Is it necessary to saparate the email id with comma or i will add all the email next one another..
Please suggest.
Thanks in advance ,
Anand

Hi Anand,
I would suggest you first follow the guidelines of the forum and a little searching. One of your questions has been asked just a few threads below.
Regards,
Martin

How do I make a button onj the form which will submit and send the pdf as an email?

how do I make a button on the form which will submit and send the pdf as an email?

You can set up a button with a "Submit a form" action and use a mailto type URL to specify the email address you want the forms sent do. If you want to send the entire PDF, select that option and not FDF or anything else. The mailto URL should not include any spaces and the "mailto" part should be lowercase, like:
mailto:[email protected]
This will attempt to initiate an email using the users default email client. If the user does not have one set up or there is some other problem, the email might not get initiated. If it needs to work with Reader versions prior to 11, then the form needs to be Reader-enabled, which you do in Acrobat 11 by selecting: File > Save As Other > Reader Extended PDF > Enable More Tools

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

Follow the instructions under the heading "How to unlink a phone number" on this page.

To convert Smart Form output to PDF format and send it via email.

Hi Friends,
Could any one please tell me, how to convert the Smart Forms output to PDF format and send it via email to customer. If any one have the code, kindly mail me to [email protected]
Thanks & Regards,
John

Refer the links -
how to convert smartform into pdf and send through mail
Smartform as PDF attachment to a mail.
smartform pdf and mail
smartform to pdf to mail
Regrads,
Amit
Reward all helpful replies.

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to customer. Can you please help me on the same?

HI Experts,
I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to vendor. Can you please help me on the same?
Thanks
SaiSreevastav

Hi Sai,
you can use XSLT or java mapping or adapter module to convert IDOC xml to XLS. Please refer the below blog
Convert incoming XML to Excel or Excel XML – Part 1 - XSLT Way
Convert incoming XML to Excel Sheet Part 2 – Adapter Module way
Convert incoming XML to Excel Sheet
then after converting to Excel, you can use the payloadswap bean in mail adapter
XI: Sender mail adapter - PayloadSwapBean - Step by step
regards,
Harish

Drop down values in Adobe Forms vanishes upon Check and Send in HRAS

Hello
The drop down values in Adobe Forms vanishes upon Check and Send while initiating the process.
I also get the error , u2018 The Entered Value is not on the List of Valid Valuesu2019 when I select the values again and try to SUBMIT.
We are in EHP4u2026 and I am seeing many Notes has been released to address these issues in EHP3 itself..
Request your help and supportu2026.
Thanks
Meena Venkatesan

Hello
Thanks for the swift response.
We applied the Note 1413209 and 1403266. The fix didnu2019t work.
I noticed the SAP Note 1403266 mentions a prerequisite Note 1346443 which is for SP4.
We are currently in SP5 and our system mentions Note 1346443 as u2018Cannot be Implemented. u2018
Please advise.

I would like a refund now. I bought this service this morning and it does not work as advertised. Reliable is not what I would use to describe this product. Cancel my subscription/refund my money and send me an email to the address I used when I signed up

I would like a refund now. I bought this service this morning and it does not work as advertised. Reliable is not what I would use to describe this product. Cancel my subscription/refund my money and send me an email to the address I used when I signed up.

Hi,
I just checked your account.
Your Adobe Export pdf service has been cancelled & refunded.
Regards,
Florence

HT4993 Hi I got 32 gb iphone 5 sprint line from America but using Turkey and send sms problem

Hi
I got 32 gb iphone 5 sprint line from America but using Turkey and send sms problem

Did you request that Sprint unlock the phone?
If so, did they? Did you follow the process to complete the unlock by restoring as new?
Did you get the message indicating the iPhone is unlocked?

Convert SAP spoolOR list to excel and send as an email attachment

Hello All Masterminds ,
Iu2019ve developed a utility, in which users has to maintain one u201CZu201D view where they can give any report name, type of attachment (PDF, XLS, TXT) and sender email addresses.u201DNote: thing to remember here is Iu2019m creating XLS,TXT,PDF format dynamicallyu201D
It is working fine for PDF. Iu2019m submitting the program and creating spool and converting it to PDF and sending to their emails as an attachment. It looks fantastic. When Iu2019m doing the same thing for XLS it is showing messy output, I tried many functions and search lots of unanswered, unfinished SDN posts. I almost tried every single clue given in these posts but no luck. Email part is working fine using classes ( l_document = cl_document_bcs=>create_document , l_document->add_attachment , l_send_request->set_document( l_document ).,cl_sapuser_bcs=>create( l_uname ).,l_send_request->add_recipient, l_send_request->set_send_immediately( '' ). ) .
My real deal is to create a beautiful XLS out put. I also tried FMs LIST_FROM_MEMORY and LIST_TO_ASCI but no-luck. I thought instead of spool if I use u201CSubmit EXPORTING LIST TO MEMORY u201C option may be It works but BIG NO 
   Iu2019m sure some genius out there has done something like his , I ain`t genius that is why I am stuck Please guys throw me some bones . As I said, I am able to do most of the things. I need some magic code /answer which turns my messy, ugly unformatted excel sheet attachment to beautiful u201Cpiece of art u201CExcel output.
Here are the FMs I tried so far with different combinations.
CALL FUNCTION 'LIST_FROM_MEMORY'
CALL FUNCTION 'LIST_TO_ASCI'
CALL FUNCTION 'GUI_DOWNLOAD'
CALL FUNCTION 'RSPO_DOWNLOAD_SPOOLJOB'
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
CALL FUNCTION 'CONVERT_OTF'
CALL FUNCTION 'SAP_CONVERT_TO_XLS_FORMAT'
And logic like to get rid of things getting in Asci tables
cl_abap_char_utilities=>newline.
cl_abap_char_utilities=>horizontal_tab
cl_abap_char_utilities=>VERTICAL_TAB
cl_abap_char_utilities=>cr_lf
FIELD-SYMBOLS: <lfs_table>,    " Internal table structure
                 <lfs_con>.      " Field Content
DATA: l_text TYPE char1024.     " Text content for mail attachment
DATA: l_con(50) TYPE c.        " Field Content in character format
Columns to be tab delimeted
LOOP AT FINAL ASSIGNING <lfs_table>.
    DO.
      ASSIGN COMPONENT sy-index OF STRUCTURE <lfs_table>
             TO <lfs_con>.
      IF sy-subrc NE 0.
        CONCATENATE c_cr l_text INTO l_text.
        APPEND l_text TO i_attach.
        EXIT.
      ELSE.
        CLEAR: l_con.
        MOVE <lfs_con> TO l_con.
        CONDENSE l_con.
        IF sy-index = 1.
          CLEAR: l_text.
          MOVE l_con TO l_text.
        ELSE.
          CONCATENATE l_text l_con INTO l_text
             SEPARATED BY c_tab.
        ENDIF.
      ENDIF.
    ENDDO.
ENDLOOP.
Posts : https://forums.sdn.sap.com/click.jspa?searchID=14756211&messageID=4401940
https://forums.sdn.sap.com/click.jspa?searchID=14756211&messageID=4796657
https://forums.sdn.sap.com/search.jspa?threadID=&q=convertspoolintoexcelformatforsendingmail&objID=c42&dateRange=all&numResults=30&rankBy=10001
Will appreciate your help and time.
Thanks,
Saquib Khan

Hi,
i send excel-att like this.
REPORT Z_EMAIL_CL_BCS MESSAGE-ID ZZ.
More examples here BCS_EXAMPLE_* with se38
DATA: SEND_REQUEST       TYPE REF TO CL_BCS.
DATA: SUBJECT            TYPE SO_OBJ_DES.
DATA: ATT_TYPE           TYPE SOODK-OBJTP.
DATA: IT_TEXT            TYPE BCSY_TEXT.
DATA: WA_TEXT            LIKE SOLI.
DATA: IT_BIN             TYPE SOLIX_TAB.
DATA: WA_BIN             TYPE SOLIX.
DATA: DOCUMENT           TYPE REF TO CL_DOCUMENT_BCS.
DATA: SENDER             TYPE REF TO CL_SAPUSER_BCS.
DATA: RECIPIENT          TYPE REF TO IF_RECIPIENT_BCS.
DATA: BCS_EXCEPTION      TYPE REF TO CX_BCS.
DATA: SENT_TO_ALL        TYPE OS_BOOLEAN.
Bytes der Datei
DATA: IT_LENGHT          TYPE SO_OBJ_LEN.
DATA: N10(10)            TYPE N.
CONSTANTS: CON_NEWL TYPE ABAP_CHAR1 VALUE CL_ABAP_CHAR_UTILITIES=>NEWLINE,
           CON_TAB TYPE ABAP_CHAR1 VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
CONSTANTS: CON_NEWL TYPE X VALUE '0D', "OK for non Unicode
            CON_TAB TYPE X VALUE '09'. "OK for non Unicode
START-OF-SELECTION.
PERFORM MAIN.
END-OF-SELECTION.
FORM MAIN.
TRY.
    -------- create persistent send request ------------------------
      SEND_REQUEST = CL_BCS=>CREATE_PERSISTENT( ).
      PERFORM HEAD_CONT.
      PERFORM XLS_ATT.
    add document to send request
      CALL METHOD SEND_REQUEST->SET_DOCUMENT( DOCUMENT ).
    --------- set sender -------------------------------------------
      SENDER = CL_SAPUSER_BCS=>CREATE( SY-UNAME ).
      CALL METHOD SEND_REQUEST->SET_SENDER
        EXPORTING
          I_SENDER = SENDER.
    --------- set recipent -----------------------------------------
      RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS(
                                        'the email adress' ).
    add recipient with its respective attributes to send request
      CALL METHOD SEND_REQUEST->ADD_RECIPIENT
        EXPORTING
          I_RECIPIENT = RECIPIENT
          I_EXPRESS   = 'X'.
     RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS(
                                       'the email adress 2' ).
    add recipient with its respective attributes to send request
     CALL METHOD SEND_REQUEST->ADD_RECIPIENT
       EXPORTING
         I_RECIPIENT = RECIPIENT
         I_EXPRESS   = 'X'.
    ---------- send document ---------------------------------------
      CALL METHOD SEND_REQUEST->SEND(
        EXPORTING
          I_WITH_ERROR_SCREEN = 'X'
        RECEIVING
          RESULT              = SENT_TO_ALL ).
      COMMIT WORK.
    CATCH CX_BCS INTO BCS_EXCEPTION.
      WRITE: 'Fehler aufgetreten.'(001).
      WRITE: 'Fehlertyp:'(002), BCS_EXCEPTION->ERROR_TYPE.
      EXIT.
ENDTRY.
ENDFORM.                    "main
FORM HEAD_CONT.
CLEAR: IT_TEXT[], WA_TEXT, SUBJECT.
ATT_TYPE = 'RAW'.
CONCATENATE 'Betreffzeile am' SY-DATUM 'um' SY-UZEIT
INTO SUBJECT SEPARATED BY SPACE.
WA_TEXT = 'Hello!'.
APPEND WA_TEXT TO IT_TEXT.
WA_TEXT = 'dieses ist eine Testmail'.
APPEND WA_TEXT TO IT_TEXT.
WA_TEXT = 'Gruß'.
APPEND WA_TEXT TO IT_TEXT.
DESCRIBE TABLE IT_TEXT LINES N10.
N10 = ( N10 - 1 ) * 255 + STRLEN( WA_TEXT ).
IT_LENGHT = N10.
DOCUMENT = CL_DOCUMENT_BCS=>CREATE_DOCUMENT(
            I_TYPE    = ATT_TYPE
            I_TEXT    = IT_TEXT
            I_LENGTH = IT_LENGHT
            I_SUBJECT = SUBJECT ).
ENDFORM.                    "HEAD_CONT
FORM XLS_ATT.
DATA: BEGIN OF ITAB OCCURS 0,
        MATNR     LIKE MARA-MATNR,
        MTART     LIKE MARA-MTART,
        MATKL     LIKE MARA-MATKL,
        BRGEW     LIKE MARA-BRGEW,
      END   OF ITAB.
DATA: BRGEW(18).
CLEAR: IT_BIN[], WA_BIN, SUBJECT.
SELECT MATNR MTART MATKL BRGEW INTO TABLE ITAB FROM MARA UP TO 10 ROWS.
CONCATENATE 'Material'      CON_TAB
        'Materialart'   CON_TAB
        'Warengruppe'   CON_TAB
        'Bruttogewicht' CON_NEWL
          INTO WA_BIN.
APPEND WA_BIN TO IT_BIN.
LOOP AT ITAB.
    WRITE ITAB-BRGEW TO BRGEW.
    CONCATENATE ITAB-MATNR CON_TAB
                ITAB-MTART CON_TAB
                ITAB-MATKL CON_TAB
                     BRGEW CON_NEWL
                INTO WA_BIN.
    APPEND WA_BIN TO IT_BIN.
ENDLOOP.
ATT_TYPE = 'XLS'.
SUBJECT = 'My XLS attachment'.
DESCRIBE TABLE IT_BIN LINES N10.
N10 = ( N10 - 1 ) * 255 + STRLEN( WA_BIN ).
IT_LENGHT = N10.
CALL METHOD DOCUMENT->ADD_ATTACHMENT
    EXPORTING
      I_ATTACHMENT_TYPE    = ATT_TYPE
      I_ATT_CONTENT_HEX    = IT_BIN
      I_ATTACHMENT_SIZE    = IT_LENGHT
      I_ATTACHMENT_SUBJECT = SUBJECT.
ENDFORM.                    "XLS_ATT
Perhaps it helps.
regards, Dieter

How to convert sap script to pdf and send it as email attachment

hi,
my requirement is to convert a standard sales order form to pdf and send it as email attachment. get me some sample code for the same
thanks in advance

Hi
See this sample code and after that use the fun module to send the mail
SO_NEW_DOCUMENT_ATT_SEND_API1
REPORT zzz_jaytest .
Types Declaration
TYPES : BEGIN OF ty_pa0001,
pernr TYPE pa0001-pernr,
bukrs TYPE pa0001-bukrs,
werks TYPE pa0001-werks,
END OF ty_pa0001.
Internal Table Declaration
DATA : i_pa0001 TYPE STANDARD TABLE OF ty_pa0001, "For pa0001 Details
i_otf TYPE STANDARD TABLE OF itcoo, "For OTF data
i_content_txt TYPE soli_tab, "Content
i_content_bin TYPE solix_tab, "Content
i_objhead TYPE soli_tab,
Work Area Declaration
w_pa0001 TYPE ty_pa0001, "For pa0001 Details
w_res TYPE itcpp, "SAPscript output
"parameters
w_otf TYPE itcoo, "For OTF
w_pdf TYPE solisti1, "For PDF
w_transfer_bin TYPE sx_boolean, "Content
w_options TYPE itcpo, "SAPscript output
"interface
Variable Declaration
v_len_in TYPE so_obj_len,
v_size TYPE i.
Constants Declaration
CONSTANTS : c_x TYPE c VALUE 'X', "X
c_locl(4) TYPE c VALUE 'LOCL', "Local Printer
c_otf TYPE sx_format VALUE 'OTF', "OTF
c_pdf TYPE sx_format VALUE 'PDF', "PDF
c_printer TYPE sx_devtype VALUE 'PRINTER', "PRINTER
c_bin TYPE char10 VALUE 'BIN', "BIN
c_name TYPE string VALUE 'C:\ZZZ_JAYTEST.PDF',"Downloading
"File Name
c_form(11) TYPE c VALUE 'ZZZ_JAYTEST'. "Form Name
START-OF-SELECTION.
Selecting the records from pa0001
SELECT pernr bukrs werks FROM pa0001
INTO TABLE i_pa0001 UP TO 10 ROWS.
Setting the options
w_options-tdcopies = 1 ."Number of copies
w_options-tdnoprev = c_x."No print preview
w_options-tdgetotf = c_x."Return of OTF table
w_options-tddest = c_locl."Spool: Output device
Opening the form
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = c_form
device = c_printer
language = sy-langu
OPTIONS = w_options
IMPORTING
RESULT = w_res.
LOOP AT i_pa0001 INTO w_pa0001.
Writting into the form
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'MAIN'
window = 'MAIN'.
ENDLOOP.
Closing the form
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = w_res
TABLES
otfdata = i_otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Converting OTF data to single line
LOOP AT i_otf INTO w_otf.
CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
INTO w_pdf.
APPEND w_pdf TO i_content_txt.
ENDLOOP.
Converting to PDF Format
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
format_src = c_otf
format_dst = c_pdf
devtype = c_printer
CHANGING
transfer_bin = w_transfer_bin
content_txt = i_content_txt
content_bin = i_content_bin
objhead = i_objhead
len = v_len_in
EXCEPTIONS
err_conv_failed = 1
OTHERS = 2.
v_size = v_len_in.
Downloading the PDF File
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = v_size
filename = c_name
filetype = c_bin
TABLES
data_tab = i_content_bin.
If you r using this function module check it once....
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
Fehlerhandling
if sy-subrc <> 0.
endif.
or u can use the standard program RSTXPDFT4 to download the script into PDF format onto a particular location
follow this link for sample program.
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1121833,00.html
check...
How to send smart form via email
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp
Regards
Anji

Sending attachments with emails in Javamail

I'm trying to send attachments with emails using Javamail. Following is the code through which I'm trying to achieve that. It works as expected on a JRE1.6 environment. But on JRE1.5, the content of the file gets added to the mail body as text.I want the file to be sent as an attachment.
Any pointers on the observed difference in behavior would be highly appreciated!
String msgText = mailInfo.getMessage();
        String attachmentFileName = mailInfo.getFileName();
        MimeBodyPart mimeBodyPart = new MimeBodyPart();
        mimeBodyPart.setText(msgText);
        // create the second message part
        MimeBodyPart attachmentBodyPart = new MimeBodyPart();
        // attach the file to the message
        FileDataSource fileDataSource = new FileDataSource(attachmentFileName);
        attachmentBodyPart.setFileName(fileDataSource.getName());
        attachmentBodyPart.setDataHandler(new DataHandler(fileDataSource));
        // create the Multipart and add its parts to it
        Multipart multipart = new MimeMultipart();
        multipart.addBodyPart(mimeBodyPart);
        multipart.addBodyPart(attachmentBodyPart);
        message.setContent(multipart);The email in case of JRE1.5 is as follows
{color:#0000ff}------=_Part_0_33189144.1233078680250
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi...Test Mail
------=_Part_0_33189144.1233078680250
Content-Type: application/octet-stream; name=corba_architecture.pdf
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=corba_architecture.pdf
Content-ID: Attachment
JVBERi0xLjIgDSXi48/TDQogDTggMCBvYmoNPDwNL0xlbmd0aCA5IDAgUg0vRmlsdGVyIC9GbGF0
ZURlY29kZSANPj4Nc3RyZWFtDQpIiUWPW07DMBBFV+A93E9QlWBP/Kj5awt8USFRbyBKnTQIkshK
YfvYcQoaybrSzDkzFhCxQgemeWkUyKTXEIeSHMGjZXvHSFBJCpXUpQLcE+NIlbCHFw4pUxeuZQUv
ueY25gYxk9mKmH9wtwvNpZ99M1+jc2wxXzxweHvf73AP9xGFhaIsTyC3/w6ZDYfxaxoHP8w4jmf/
------=_Part_0_33189144.1233078680250-- {color}

Following is the debug trace obtained on running the program on 1.5.
+12:45:57,218 INFO [MailerThread] EmailManager:306 - Sending message {toAddress [email protected],+
+replyTo =null,+
+cc =null,+
+message =Hi...Test Mail,+
+subject =test mail,+
+contentType =null fileName =C:\docs\cbe\dist computing\A.txt }+
Loading javamail.default.providers from jar:file:/C:/docs/cbe/lib/mail-1.4.jar!/META-INF/javamail.default.providers
DEBUG: loading new provider protocol=imap, className=com.sun.mail.imap.IMAPStore, vendor=Sun Microsystems, Inc, version=null
DEBUG: loading new provider protocol=imaps, className=com.sun.mail.imap.IMAPSSLStore, vendor=Sun Microsystems, Inc, version=null
DEBUG: loading new provider protocol=smtp, className=com.sun.mail.smtp.SMTPTransport, vendor=Sun Microsystems, Inc, version=null
DEBUG: loading new provider protocol=smtps, className=com.sun.mail.smtp.SMTPSSLTransport, vendor=Sun Microsystems, Inc, version=null
DEBUG: loading new provider protocol=pop3, className=com.sun.mail.pop3.POP3Store, vendor=Sun Microsystems, Inc, version=null
DEBUG: loading new provider protocol=pop3s, className=com.sun.mail.pop3.POP3SSLStore, vendor=Sun Microsystems, Inc, version=null
DEBUG: getProvider() returning provider protocol=smtp; type=javax.mail.Provider$Type@77eaf8; class=com.sun.mail.smtp.SMTPTransport; vendor=Sun Microsystems, Inc
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "10.16.68.131", port 25, isSSL false
+220 mailhost5.vmware.com ESMTP Postfix (mailhost5)+
DEBUG SMTP: connected to host "10.16.68.131", port: 25
EHLO sbanerjee
+250-mailhost5.vmware.com+
+250-PIPELINING+
+250-SIZE 26800000+
+250-VRFY+
+250-ETRN+
+250-ENHANCEDSTATUSCODES+
+250-8BITMIME+
+250 DSN+
DEBUG SMTP: Found extension "PIPELINING", arg ""
DEBUG SMTP: Found extension "SIZE", arg "26800000"
DEBUG SMTP: Found extension "VRFY", arg ""
DEBUG SMTP: Found extension "ETRN", arg ""
DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
DEBUG SMTP: Found extension "8BITMIME", arg ""
DEBUG SMTP: Found extension "DSN", arg ""
DEBUG SMTP: use8bit false
MAIL FROM:<[email protected]>
+250 2.1.0 Ok+
RCPT TO:<[email protected]>
+250 2.1.5 Ok+
DEBUG SMTP: Verified Addresses
DEBUG SMTP:   [email protected]
DATA
+354 End data with <CR><LF>.<CR><LF>+
------=_Part_0_3278348.1233126957281
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi...Test Mail
------=_Part_0_3278348.1233126957281
Content-Type: text/plain; charset=us-ascii; name=A.txt
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=A.txt
Content-ID: Attachment
adasdasdd
------=_Part_0_3278348.1233126957281--
+.+
+250 2.0.0 Ok: queued as 5BE5BDC100+
+12:45:59,125 INFO [MailerThread] EmailManager:331 - Message {toAddress [email protected],+
+replyTo =null,+
+cc =null,+
+message =Hi...Test Mail,+
+subject =test mail,+
+contentType =null fileName =C:\docs\cbe\dist computing\A.txt } sent to the SMTP server successfully+

How do I send attachments by email from my iPad

How do I send attachments by email from my iPad

The thing to remember is that iOS email attachments start with the document itself, not from the Mail app.
1. Select the thing you want to send in an app that handles it, (for example a Photo might be sent from Photos, a PDF from GoodReader etc.)
2. Then tap the "share" button (which I see others have kindly posted screenshots for) and create an email containing that attachment.
Peter
<Link Edited By Host>

To convert Sap Script output to PDF format and send it via email.

Hi Friends,
Could any one please tell me, how to convert the Sap Script output to PDF format and send it via email. If any one have the code, kindly mail me to [email protected]
Thanks & Regards,
John

Plese check this sample code from other thread.
REPORT zzz_jaytest .
Types Declaration
TYPES : BEGIN OF ty_pa0001,
pernr TYPE pa0001-pernr,
bukrs TYPE pa0001-bukrs,
werks TYPE pa0001-werks,
END OF ty_pa0001.
Internal Table Declaration
DATA : i_pa0001 TYPE STANDARD TABLE OF ty_pa0001, "For pa0001 Details
i_otf TYPE STANDARD TABLE OF itcoo, "For OTF data
i_content_txt TYPE soli_tab, "Content
i_content_bin TYPE solix_tab, "Content
i_objhead TYPE soli_tab,
Work Area Declaration
w_pa0001 TYPE ty_pa0001, "For pa0001 Details
w_res TYPE itcpp, "SAPscript output
"parameters
w_otf TYPE itcoo, "For OTF
w_pdf TYPE solisti1, "For PDF
w_transfer_bin TYPE sx_boolean, "Content
w_options TYPE itcpo, "SAPscript output
"interface
Variable Declaration
v_len_in TYPE so_obj_len,
v_size TYPE i.
Constants Declaration
CONSTANTS : c_x TYPE c VALUE 'X', "X
c_locl(4) TYPE c VALUE 'LOCL', "Local Printer
c_otf TYPE sx_format VALUE 'OTF', "OTF
c_pdf TYPE sx_format VALUE 'PDF', "PDF
c_printer TYPE sx_devtype VALUE 'PRINTER', "PRINTER
c_bin TYPE char10 VALUE 'BIN', "BIN
c_name TYPE string VALUE 'C:\ZZZ_JAYTEST.PDF',"Downloading
"File Name
c_form(11) TYPE c VALUE 'ZZZ_JAYTEST'. "Form Name
START-OF-SELECTION.
Selecting the records from pa0001
SELECT pernr bukrs werks FROM pa0001
INTO TABLE i_pa0001 UP TO 10 ROWS.
Setting the options
w_options-tdcopies = 1 ."Number of copies
w_options-tdnoprev = c_x."No print preview
w_options-tdgetotf = c_x."Return of OTF table
w_options-tddest = c_locl."Spool: Output device
Opening the form
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = c_form
device = c_printer
language = sy-langu
OPTIONS = w_options
IMPORTING
RESULT = w_res.
LOOP AT i_pa0001 INTO w_pa0001.
Writting into the form
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'MAIN'
window = 'MAIN'.
ENDLOOP.
Closing the form
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = w_res
TABLES
otfdata = i_otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Converting OTF data to single line
LOOP AT i_otf INTO w_otf.
CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
INTO w_pdf.
APPEND w_pdf TO i_content_txt.
ENDLOOP.
Converting to PDF Format
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
format_src = c_otf
format_dst = c_pdf
devtype = c_printer
CHANGING
transfer_bin = w_transfer_bin
content_txt = i_content_txt
content_bin = i_content_bin
objhead = i_objhead
len = v_len_in
EXCEPTIONS
err_conv_failed = 1
OTHERS = 2.
v_size = v_len_in.
Downloading the PDF File
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = v_size
filename = c_name
filetype = c_bin
TABLES
data_tab = i_content_bin.
The extension is put the it_mailpack-obj_name parameter of 'SO_NEW_DOCUMENT_ATT_SEND_API1'.

Storing form information using cfm and sending attachments in email

Similar Messages

Maybe you are looking for