Storing Images and Documents in Portal

Dear Experts,
I have a scenario in which webdynpro and JSP Dynpage applications shall refer and upload image files in the portal. I have created a common file mount under WAS' irj folder and I am able to access and write the images.
I made a common folder under irj folder on the server so that my application will refer the images by just giving the relative path i.e irj\foldername\image name and the access would be fasted instead of refering an independent folder somewhere on the server.
My question is, Is there is any impact if I create a folder under irj folder and store all the images? Any suggestions/pointers to the documentations would be great.
Thanks
Ram

If you are required to migrate from development to testing and then production server...then I think there can be problem as your application will not find folder in next systems.

Similar Messages

Iphoto duplicates in images and documents

Is it normal for images to be stored in all images and all documents,
I would like to reduce the amount I have , but first want to be sure I do not delete the originals. Surely I am using double the space?

am I ok to delete duplicates? from documents and images
NO
or am I best leaving well alone?
Yes!
All Images is just a list of files and being in the list does not indicate en extra copy
All images is just a list and DOES NOT indicate duplicates - it is like having three copies of your bank statement - that does not give you three times as much money
All documents is the same
Likewise all documents is just a list and DOES NOT indicate duplicates
And if these photos are in iPhoto you must NEVER move or delete them from these lists - it will corrupt your iPhoto library - Photos in iPhoto must be managed ONLY using iPhoto
Do not ever delete iPhoto photos from the All images or the all documents lists these ARE NOT Duplicates - they are just a list of files
LN

How can i use adobe drive/cs4 for storing images and interact this with adobe cq5.4 DAM...

Hi,
Can anybody suggest me i want use adobe drive to store images and i want to access the images for my cq5.4 instance..
I want to integrate drive to the cq5.4 dam for ignoring the dam burden on cq5 instane repository..
Is it possible to use this drive? or is there any other way i can achieve my task?
Thanks,
Sony C.

Adobe Drive software doesn't store images; it enables integration of a DAM system with Creative Suite and now Creative Cloud desktop apps.
Adobe Drive 3 is the first version of the software to support integration with Adobe's DAM. This version was designed to work with CS5 and CS5.5 apps.
We do not have a version of Drive that supports integration with CQ 5.4 DAM and CS4 apps.

Storing images and icons in a JAR file

Hi,
I current have a JAR file to store our application icons in the GIF format. The application also uses several images which I would prefer to be stored in the JAR file as JPG files.
Is it possible to store both GIFs and JPGs in a JAR and access them from Forms?
For Example:
I am using code like:
read_image_file('mess_bold.jpg','URL','IM_BOLD');
and I have this image file in the JAR but I get the error...
Unable to load image mess_bold.jpg for Image Item
Also the Apache log shows...
File does not exist: c:/oracle/frhome_1/forms/java/icons/mess_bold.jpg.gif
Is this a config problem? I noticed that the read_image_file call looks in the icons directory which I specify in my Registry.dat file. Do the settings for default.icons.iconpath and default.icons.iconextension apply to images as well?
Thank you in anticipation.
Regards,
Tom Casserly

Hi,
I already had the entry imageBase=codebase in my formsweb.cfg
According to this article it is possible to read images from the JAR using the 'URL' parameter see
https://metalink.oracle.com/metalink/plsql/f?p=130:14:2109110130595761322::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,137397.1,1,1,1,helvetica
I have managed to get the images loading from the JAR but only if I have them in the same directory and format (ie gif) as the icons. As I suggested above I think that read_image_file must be accessing the default.icons.iconpath=icons/ default.icons.iconextension=gif from my Registry.dat file.
There is also a slight problem that you cannot seem to use read_image_file in the WNFI or PF trigger as suggested here: Re: Read images from a jar file?
Has anyone managed to access images from a JAR in JPEG format alongside GIF icons?
Thanks for you help.
Regards,
Tom Casserly

Store image and document files

If I define a table column as BLOB type, and I want it to hold image files. Can I used it for holding multiple images/pictures? Same question is asked for the document files such as .DOC or .PDF files?
I mean something like this:
ROW ID BLOB
Row 1 Image 1
Row 2 Image 2
Row 3 Image 3
Can I put all three (images 1, 2 , and 3) into one "cell", such as:
Row 1 Image 1|Image 2|Image 3?
Similarly for the document, Can I put all three (doc 1, 2 , and 3) into one "cell", such as:
Row 1 Doc 1|Doc 2|Doc 3?
Thanks
Scott

scottjhn wrote:
If I define a table column as BLOB type, and I want it to hold image files. Can I used it for holding multiple images/pictures? Same question is asked for the document files such as .DOC or .PDF files?Yes, you can. But it will require you to create a "+mega datastructure+", embed the content (images, pdf, docs) into this and then saving that structure as a LOB.
For example, you can use XML, use base64 to encode the image/doc/pdf and add it into the XML structure - and repeat for each image/doc/pdf until they are all in that single XML format. XML is however not that well suited for dealing with large binary structures.
You can create your own format. You create a fixed size header structure that contains filename and size. You then write into the LOB a header+file, header+file, and so on.
Reading the LOB is relatively easy as you read a header (fixed size). This tell you how many of the following bytes are file (image/pdf/doc). Read this variable part and then read the next fixed sized header.
However... this is a lot of extra code that needs to be written. The LOB structure is a lot more complex. And you have to ask yourself how is this better in anyway to use header-and-file when you can achieve exactly the same using a table structure +(filename, lob)+.
If you want to store structured data in a database, then use the database to provide that structure for you. It is highly questionable to create your own complex data structure (only understood by your code) and then chuck that into a single database column value. This will not be robust. This cannot perform. This will never scale.
So your approach.. well, bluntly put I would put that into the Very Silly Party category.. you know the party who, for the Harpenden constituency, had election candidate Malcolm Peter Brian Telescope Adrian Umbrella Stand Jasper Wednesday (pops mouth twice) Stoatgobbler John Raw Vegetable (whinnying) Arthur Norman Michael (blows squeaker) Featherstone Smith (whistle) Northgot Edwards Harris (fires pistol, then 'whoop') Mason (chuff-chuff-chuff-chuff) Frampton Jones Fruitbat (laughs) (squeaker) Gilbert (sings) 'We'll keep a welcome in the' (three shots) Williams If I Could Walk That Way Jenkin (squeaker) Tiger-drawers Pratt Thompson (sings) 'Raindrops Keep Falling On My Head' Darcy Carter (horn) Pussycat (sings) 'Don't Sleep In The Subway' Barton Mainwaring (hoot, 'whoop') Smith.

Save as, type files, images, and documents

Is it possible in flash to embed links to use right click save as for large documents.
I know that you can open a pdf in another browser but what about a file that you just want people to be able to save and not open.

If your linked file is zipped, it will be downloaded and not opened.

Thumbnailer fails in Nautilus for images and documents

My nautilus does not show any thumbnails anymore. I didn't upgrade nautilus lately.
See my pacman.conf log:
[2012-08-30 12:27] Running 'pacman -Sy'
[2012-08-30 12:27] synchronizing package lists
[2012-08-30 12:27] Running 'pacman -S -u'
[2012-08-30 12:27] starting full system upgrade
[2012-08-30 12:30] removed libsystemd (188-2)
[2012-08-30 12:30] removed systemd-tools (188-2)
[2012-08-30 12:30] upgraded glib2 (2.32.4-1 -> 2.33.10-1)
[2012-08-30 12:30] upgraded at-spi2-core (2.4.2-1 -> 2.5.5-1)
[2012-08-30 12:30] upgraded atk (2.4.0-1 -> 2.5.4-1)
[2012-08-30 12:30] upgraded at-spi2-atk (2.4.0-1 -> 2.5.90-1)
[2012-08-30 12:30] warning: /etc/davfs2/davfs2.conf installed as /etc/davfs2/davfs2.conf.pacnew
[2012-08-30 12:30] upgraded davfs2 (1.4.6-2 -> 1.4.7-1)
[2012-08-30 12:30] upgraded filesystem (2012.7-1 -> 2012.8-1)
[2012-08-30 12:30] upgraded libevent (2.0.19-1 -> 2.0.20-1)
[2012-08-30 12:31] upgraded firefox (14.0.1-1 -> 15.0-1)
[2012-08-30 12:31] upgraded firefox-i18n-de (14.0.1-1 -> 15.0-1)
[2012-08-30 12:31] upgraded gc (7.2-1 -> 7.2.d-1)
[2012-08-30 12:31] upgraded gdk-pixbuf2 (2.26.2-1 -> 2.26.3-1)
[2012-08-30 12:31] Generating locales...
[2012-08-30 12:31] de_DE.UTF-8... done
[2012-08-30 12:31] de_DE.ISO-8859-1... done
[2012-08-30 12:31] Generation complete.
[2012-08-30 12:31] upgraded glibc (2.16.0-3 -> 2.16.0-4)
[2012-08-30 12:31] upgraded glibmm (2.32.1-1 -> 2.33.3-1)
[2012-08-30 12:31] upgraded gobject-introspection (1.32.1-2 -> 1.33.9-1)
[2012-08-30 12:31] upgraded gsettings-desktop-schemas (3.4.2-1 -> 3.5.90-1)
[2012-08-30 12:31] upgraded hspell (1.1-2 -> 1.2-1)
[2012-08-30 12:31] ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
[2012-08-30 12:31] :: Append 'init=/bin/systemd' to your kernel command line in your
[2012-08-30 12:31] bootloader to replace sysvinit with systemd
[2012-08-30 12:31] installed systemd (189-3)
[2012-08-30 12:31] upgraded initscripts (2012.08.3-1 -> 2012.08.3-2)
[2012-08-30 12:31] upgraded lib32-glibc (2.16.0-3 -> 2.16.0-4)
[2012-08-30 12:31] upgraded libatasmart (0.18-2 -> 0.19-1)
[2012-08-30 12:31] upgraded libdrm (2.4.38-1 -> 2.4.39-1)
[2012-08-30 12:31] upgraded libedit (20120311_3.0-1 -> 20120601_3.0-1)
[2012-08-30 12:31] upgraded libwbclient (3.6.7-1 -> 3.6.7-2)
[2012-08-30 12:31] >>> Updating module dependencies. Please wait ...
[2012-08-30 12:31] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-08-30 12:31] ==> Building image from preset: 'default'
[2012-08-30 12:31] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-08-30 12:31] ==> Starting build: 3.5.3-1-ARCH
[2012-08-30 12:31] -> Running build hook: [base]
[2012-08-30 12:31] -> Running build hook: [udev]
[2012-08-30 12:31] -> Running build hook: [autodetect]
[2012-08-30 12:31] -> Running build hook: [pata]
[2012-08-30 12:31] -> Running build hook: [scsi]
[2012-08-30 12:31] -> Running build hook: [sata]
[2012-08-30 12:31] -> Running build hook: [filesystems]
[2012-08-30 12:31] -> Running build hook: [usbinput]
[2012-08-30 12:31] -> Running build hook: [fsck]
[2012-08-30 12:31] ==> Generating module dependencies
[2012-08-30 12:31] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-08-30 12:31] ==> Image generation successful
[2012-08-30 12:31] ==> Building image from preset: 'fallback'
[2012-08-30 12:31] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-08-30 12:31] ==> Starting build: 3.5.3-1-ARCH
[2012-08-30 12:31] -> Running build hook: [base]
[2012-08-30 12:31] -> Running build hook: [udev]
[2012-08-30 12:31] -> Running build hook: [pata]
[2012-08-30 12:31] -> Running build hook: [scsi]
[2012-08-30 12:31] -> Running build hook: [sata]
[2012-08-30 12:31] -> Running build hook: [filesystems]
[2012-08-30 12:31] -> Running build hook: [usbinput]
[2012-08-30 12:31] -> Running build hook: [fsck]
[2012-08-30 12:31] ==> Generating module dependencies
[2012-08-30 12:31] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-08-30 12:31] ==> Image generation successful
[2012-08-30 12:31] upgraded linux (3.5.2-1 -> 3.5.3-1)
[2012-08-30 12:31] upgraded linux-headers (3.5.2-1 -> 3.5.3-1)
[2012-08-30 12:31] upgraded lirc-utils (1:0.9.0-25 -> 1:0.9.0-26)
[2012-08-30 12:31] upgraded openssh (6.0p1-3 -> 6.1p1-1)
[2012-08-30 12:31] upgraded smbclient (3.6.7-1 -> 3.6.7-2)
[2012-08-30 12:31] upgraded thunderbird (14.0-1 -> 15.0-1)
[2012-08-30 12:31] upgraded thunderbird-i18n-de (14.0-1 -> 15.0-1)
[2012-08-30 12:31] upgraded upower (0.9.17-2 -> 0.9.18-1)
[2012-08-30 12:31] upgraded xf86-video-intel (2.20.4-1 -> 2.20.5-1)
[2012-08-30 12:31] upgraded xorg-server-common (1.12.3.901-1 -> 1.12.4-1)
[2012-08-30 12:31] upgraded xorg-server (1.12.3.901-1 -> 1.12.4-1)
[2012-08-30 12:32] Running 'pacman -U /tmp/yaourt-tmp-asphantix/PKGDEST.RHo/ttf-vlgothic-20120829-1-any.pkg.tar.xz'
[2012-08-30 12:33] Updating font cache... done.
[2012-08-30 12:33] upgraded ttf-vlgothic (20120827-1 -> 20120829-1)
[2012-08-30 13:03] Running 'pacman -Sy'
[2012-08-30 13:03] synchronizing package lists
[2012-08-30 13:10] Running 'pacman -Sy'
[2012-08-30 13:10] synchronizing package lists
[2012-08-30 13:16] Running 'pacman -U /tmp/yaourt-tmp-asphantix/PKGDEST.Yia/nuvola-bzr-535-1-x86_64.pkg.tar.xz'
[2012-08-30 13:16] sh: pre_upgrade: Kommando nicht gefunden.
[2012-08-30 13:16] sh: post_upgrade: Kommando nicht gefunden.
[2012-08-30 13:16] upgraded nuvola-bzr (510-1 -> 535-1)
[2012-08-30 14:12] synchronizing package lists
[2012-08-31 06:29] Running 'pacman -Sy'
[2012-08-31 06:29] synchronizing package lists
[2012-08-31 06:30] Running 'pacman -S -u'
[2012-08-31 06:30] starting full system upgrade
[2012-08-31 06:31] upgraded imagemagick (6.7.8.9-1 -> 6.7.9.2-1)
[2012-08-31 06:31] upgraded mpfr (3.1.1-1 -> 3.1.1.p2-1)
[2012-08-31 06:31] upgraded ppp (2.4.5-3 -> 2.4.5-4)
[2012-08-31 06:31] upgraded systemd (189-3 -> 189-4)
[2012-08-31 06:31] installed sysvinit-tools (2.88-7)
[2012-08-31 06:31] upgraded sysvinit (2.88-6 -> 2.88-7)
[2012-08-31 06:49] Running 'pacman -U /tmp/yaourt-tmp-asphantix/PKGDEST.XON/jdk-7.7-1-x86_64.pkg.tar.xz'
[2012-08-31 06:49] upgraded jdk (7.6-1 -> 7.7-1)
[2012-08-31 06:51] Running 'pacman -U /tmp/yaourt-tmp-asphantix/PKGDEST.lH7/jre-7.7-1-x86_64.pkg.tar.xz'
[2012-08-31 06:51] upgraded jre (7.6-1 -> 7.7-1)
[2012-08-31 08:19] Running 'pacman -Sy'
[2012-08-31 08:19] synchronizing package lists
[2012-08-31 09:37] Running 'pacman -Sy'
[2012-08-31 09:37] synchronizing package lists
[2012-08-31 09:48] Running 'pacman -U /tmp/yaourt-tmp-asphantix/PKGDEST.H0f/cnijfilter-mg5200-3.40-10-x86_64.pkg.tar.xz'
[2012-08-31 09:48] upgraded cnijfilter-mg5200 (3.40-9 -> 3.40-10)
[2012-08-31 10:57] Running 'pacman -S --asdeps --needed community/python2-distutils-extra archlinuxfr/libdbusmenu'
[2012-08-31 10:57] installed python2-distutils-extra (2.32-1)
[2012-08-31 10:57] installed libdbusmenu (0.6.1-1)
[2012-08-31 11:00] Running 'pacman -U /tmp/yaourt-tmp-asphantix/PKGDEST.BMU/lightread-1.1.1-1-any.pkg.tar.xz'
[2012-08-31 11:00] installed lightread (1.1.1-1)
[2012-08-31 11:00] Running 'pacman -Sy'
[2012-08-31 11:00] synchronizing package lists
[2012-08-31 11:00] Running 'pacman -Sy'
[2012-08-31 11:00] synchronizing package lists
[2012-08-31 12:58] Running 'pacman -Sy'
[2012-08-31 12:58] synchronizing package lists
[2012-08-31 12:58] Running 'pacman -S -u'
[2012-08-31 12:58] starting full system upgrade
[2012-08-31 12:59] upgraded lib32-gdk-pixbuf2 (2.26.2-1 -> 2.26.3-1)
[2012-08-31 12:59] upgraded libreoffice-de (3.5.6-1 -> 3.6.1-1)
[2012-08-31 12:59] upgraded libreoffice-en-US (3.5.6-1 -> 3.6.1-1)
[2012-08-31 13:00] upgraded libreoffice-common (3.5.6-1 -> 3.6.1-1)
[2012-08-31 13:00] upgraded libreoffice-base (3.5.6-1 -> 3.6.1-1)
[2012-08-31 13:00] upgraded libreoffice-calc (3.5.6-1 -> 3.6.1-1)
[2012-08-31 13:00] upgraded libreoffice-draw (3.5.6-1 -> 3.6.1-1)
[2012-08-31 13:00] upgraded libreoffice-gnome (3.5.6-1 -> 3.6.1-1)
[2012-08-31 13:00] upgraded libreoffice-impress (3.5.6-1 -> 3.6.1-1)
[2012-08-31 13:00] upgraded libwps (0.2.2-2 -> 0.2.7-1)
[2012-08-31 13:00] upgraded libreoffice-writer (3.5.6-1 -> 3.6.1-1)
[2012-08-31 13:00] upgraded libwebkit (1.8.2-1 -> 1.8.3-1)
[2012-08-31 13:00] upgraded libwebkit3 (1.8.2-1 -> 1.8.3-1)
[2012-08-31 13:01] Running 'pacman -S extra/nautilus'
[2012-08-31 13:01] upgraded nautilus (3.4.2-1 -> 3.4.2-1)
[2012-08-31 13:02] Running 'pacman -Sy'
[2012-08-31 13:02] synchronizing package lists
[2012-08-31 13:03] Running 'pacman -S extra/clucene'
[2012-08-31 13:03] installed clucene (2.3.3.4-6)
[2012-08-31 13:11] Running 'pacman -Sy'
[2012-08-31 13:11] synchronizing package lists
[2012-08-31 13:11] Running 'pacman -S libreoffice'
[2012-08-31 13:12] upgraded libreoffice-common (3.6.1-1 -> 3.6.1-1)
[2012-08-31 13:12] upgraded libreoffice-base (3.6.1-1 -> 3.6.1-1)
[2012-08-31 13:12] upgraded libreoffice-calc (3.6.1-1 -> 3.6.1-1)
[2012-08-31 13:12] upgraded libreoffice-draw (3.6.1-1 -> 3.6.1-1)
[2012-08-31 13:12] upgraded libreoffice-gnome (3.6.1-1 -> 3.6.1-1)
[2012-08-31 13:12] upgraded libreoffice-impress (3.6.1-1 -> 3.6.1-1)
[2012-08-31 13:12] installed strigi (0.7.7-2)
[2012-08-31 13:12] installed attica (0.4.1-1)
[2012-08-31 13:12] installed redland-storage-virtuoso (1:1.0.15-3)
[2012-08-31 13:12] installed libiodbc (3.52.8-1)
[2012-08-31 13:12] installed virtuoso-base (6.1.6-1)
[2012-08-31 13:12] installed soprano (2.8.0-2)
[2012-08-31 13:12] installed grantlee (0.2.0-1)
[2012-08-31 13:12] installed shared-desktop-ontologies (0.10.0-1)
[2012-08-31 13:12] installed qca (2.0.3-2)
[2012-08-31 13:12] installed libdbusmenu-qt (0.9.2-1)
[2012-08-31 13:12] installed polkit-qt (0.103.0-1)
[2012-08-31 13:12] installed ilmbase (1.0.2-1)
[2012-08-31 13:12] installed openexr (1.7.0-2)
[2012-08-31 13:12] installed docbook-xml (4.5-5)
[2012-08-31 13:12] installed docbook-xsl (1.77.1-2)
[2012-08-31 13:12] installed lsof (4.86-1)
[2012-08-31 13:12] installed udisks (1.0.4-5)
[2012-08-31 13:12] installed kdelibs (4.9.0-4)
[2012-08-31 13:12] installed libreoffice-kde4 (3.6.1-1)
[2012-08-31 13:12] installed libreoffice-math (3.6.1-1)
[2012-08-31 13:12] installed postgresql-libs (9.1.4-1)
[2012-08-31 13:12] installed libreoffice-postgresql-connector (3.6.1-1)
[2012-08-31 13:12] installed libreoffice-sdk (3.6.1-1)
[2012-08-31 13:12] installed libreoffice-sdk-doc (3.6.1-1)
[2012-08-31 13:12] upgraded libreoffice-writer (3.6.1-1 -> 3.6.1-1)
It just looks like that:
Well since there is a clock instead of a thumbnail I think the thumbnail is stuck in a loop.
Sometimes nautilus takes 90% CPU. But there are no errors when starting nautilus from the terminal.
I hope you can help me.

Yes for me.
Here is the list of installed packages from testing
testing/coreutils 8.19-1 (base) [installed]
testing/cups 1.6.1-6 [installed]
testing/cups-filters 1.0.23-1 [installed]
testing/hwids 20120831-1 [installed]
testing/libcups 1.6.1-6 [installed]
testing/network-manager-applet 0.9.6.2-1 [installed]
testing/networkmanager 0.9.6.0-1 [installed]
testing/networkmanager-openconnect 0.9.6.2-1 [installed]
testing/networkmanager-openvpn 0.9.6.0-1 [installed]
testing/networkmanager-pptp 0.9.6.0-1 [installed]
testing/networkmanager-vpnc 0.9.6.0-1 [installed]
testing/openconnect 1:4.06-1 [installed]
testing/ppp 2.4.5-4 (base) [installed]
testing/procps-ng 3.3.3-5 (base) [installed]
testing/qpdf 3.0.1-2 [installed]
testing/sudo 1.8.6-1 [installed]
testing/sysvinit 2.88-8 (base) [installed]
testing/sysvinit-tools 2.88-8 (base) [installed]
testing/upower 0.9.18-2 [installed]
testing/util-linux 2.22-2 (base) [installed]
multilib-testing/lib32-util-linux 2.22-1 [installed]
Thank you.
Last edited by gandalfmagic (2012-09-05 07:19:20)

Keep track of images and links in a datafile

Hi,
I have set up replication between my source and destination server. How do images and contents linked in a webpage section replicate?
I think images and content reffred should be replicated seperately, as a datafile doesnot have a refrence telling images reffered should be moved.
Now the question is how to move Images and contents that are linked in the webpage along with datafiles.
One solution is to use SiteStudio section replication. If we use that how to make sure this goes through a work flow and then gets replicated?
your inputs willl be usefull

This seems somewhat like an architecture question. Let's assume you have two servers (I'll call them staging and production). You have set the Site Studio Migration Utility to automatically replicate content associated with your site from staging to production. Now in our example, on staging there is a datafile with various images and links to native content that users regularly update. You have a workflow layer applied to all datafiles of your site so that content isn't migrated into production until it has been workflow approved. I'm assuming this is how you are set up (since this is a commonly recommended architecture).
Now back to the datafile. I'm assuming the images in the datafile (as well as any linked native content) have site specific metadata applied to them, so that the Site Studio Migration utility replicates them into production just like migrates other areas of your site. If that is the case, then it is the responsibility of the workflow approver to verify that all images (and document links) look right before approving the content for auto migration.
Unfortunately, you may run into a situation like the following... You have a page that lists sales figures every month, and uses an image to visualize those sales figures. You already have a datafile in production for February as well as the associated February graphic. You create an updated sales figure datafile for March, as well as an updated associated image for March. The image migrates into production automatically, before the updated datafile referencing the updated image clears workflow. Your February sales figure page could potentially have the March sales image inside of it. This is a potential problem since there is no concept of a "group approval" for all elements that make up the contents within a datafile. You could add a layer of workflow to all native content and images, but then you'd have to be fairly certain that you were synched up properly. You could also manually migrate, but I can see where this would not be ideal either. Unfortunately, there is no easy answer.

Instruction on how to work with images and videos in the storage azure using php

Dear Sirs
I followed below instruction to make video and image storage on Azure using PHP:
http://azure.microsoft.com/en-us/documentation/articles/storage-php-how-to-use-blobs/
Whenever I record an image on Azure storage and download stored image there is no format
in the stored image. and end up becoming like any other regular file. Othe problem is that I cannot see the concerned image in the browser. I already have checked recipient access and it is defined as public reading.
Could you also please provide me with an article instructing how to make upload, download,
show up on the browser and remove video and images from the azure storage area?
Thanks & Regards,
Pedro

Hi Pedro,
Thanks for your posting!
I am not familiar with PHP. But from your description, I think your need pay attention to those points in your code:
1.When you store file or download file, please write the file name and
suffix, for example, you need store image as blob name "image.png".
2.When you download file from Azure blob, you need set the content type.
if your file is image, you could set the content type as image type.
3.You could get the blob URI, and set your image URL as blob URI. Do this, you can show the picture.
Please see this similar issue thread:
http://phpazure.codeplex.com/discussions/472840
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Upload and displaying document file and image file with oracle portal

Dear All,
Could anyone please tell me how to displaying document file and image file that I've stored to database (8.1.7) using oracle portal. (I use intermedia data type).
I've tried to follow the instruction given by Oracle LiveDemo, but it came with failure. (the image or document won't show up).
Thanks for support.
Moza

Please repost this question in the appropriate section of the Discussion Forum.
This forum is for general suggestions and feedback about the OTN site. For technical question about an Oracle product,
For customers with paid support (Metalink) please go to:
http://www.oracle.com/support/metalink

Missing Images and CSS when going to portal/server.pt can't login

Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
    ======= Diagnostic Run Complete =======
    Startup completion percentage: 100% (50 steps out of 50 complete)
    ===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
    Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
    AllowOverride None
# Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
    Options Indexes
    AllowOverride None
    Order allow,deny
    Allow from all
    <Files *.html>
        SetHandler type-map
    </Files>
    SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
    RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of        .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

Visibility of non-SAP reports and documents in the Portal

Hi All,
I am new to the portal forum and need your direction. We have the need for outside users to view static reports and documents not generated by SAP on the portal. Can anyone point me to documentation on how this can be accomplished? We do not have Knowledge Management installed and my research seems to show that KM is the only way, is there another and how can we do it?
Thanks for your help.
Pam

Pam,
How are your reports served? If they are served up by URL, you can create a URL iview back to the source system. If you need to store them in the portal system then you need KM.
jwise

Internal links in portal (CSS, images, and other struts actions)

Good morning gurus! I have another question regarding Struts Portlets. We have an application that builds a page with an image that comes from the database. The application is composed of two Struts actions. One that's in charge of drawing the page and the other action is in charge of bringing the image from the database. The second action is called from a JSP (img src="/getImage.do"). In portal, once the portlet rendered the JSP it doesn't recongnize the other links inside the JSP (the call to the second action). Also, other links suchs as images, CSS, and others Struts actions are not recognized. How can I access images, links, and CSS from the main application (the actual application).
Best regards,
Marcelo Oliva
Message was edited by:
molivas08

Hi Andrew -
This is a pretty big topic for one thread ... I will try to provide some pointers on where to look for more information.
1. Need ability for non-html literate authors to update text, images and links on their portion of a shared web page
In the following whitepaper, see the section: Associated Funtion for Item Display
http://www.oracle.com/technology/products/ias/portal/pdf/oow_10gr2_1336_fender.pdf
This will allow you to prompt your non-HTML literate users for the "parts" to display and you worry about the UI.
2. Need ability to enforce common look and feel on content provided by non-html literate authors.
Create pages based on Templates. Templates can force the style on users. Again - do not use text items and the RTE for users, you control the display with an Associated Function.
3. Prefer ability to approve content before it goes live.
Grant content contributors "Manage with Approval" access
5. Need advanced search capabilities
Check out the search section on Portal OTN
http://www.oracle.com/technology/products/ias/portal/content_management_10gr2.html
Hope this helps,
Candace

How to retreive images and xml stored in temporary internet files

hi all,
I am creating an air application that has to work in offline too.so i have decided to retrieve datas it from temporary internet files(is it a rightway or anyother way to do that if so pls suggest). I have an issues of retreiving images and xml stored in the temporary internet files of the user system ..can anybody help me and give solution for this..
regards,
Divya.

What software are you using to create the website? Perhaps there is some command you can implement on the website to force the entire file to be downloaded. If you use Dreamweaver, you might ask in that forum. If you make the link an ftp link rather than a http link, you might guarantee that the file will be downloaded in its entirety, but the download location will not necessarily be in a temp folder.

How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

Or choose Window > Arrange > Tile
And, you of course can copy/paste without tiling.

Storing Images and Documents in Portal

Similar Messages

Maybe you are looking for