Storing photo ink for later use

What's the proper way to store the Vivera ink cartridges when not in use? Right side up, upside down? I have it in a small Tupperware container which seals tightly.
This question was solved.
View Solution.

maxjoy wrote:
It is a photo cartridge #99 for Officejet 6310 All -in-One. Is a humidor the black plastic "holder?" What about the tape that covers the print head--replace for storage or toss?
Yes, you should use the black plastic holder and store with the nozzles facing down. Toss the tape once it is removed, if you try to reapply the tape it will cause color misssing (or in the case of the #99 cartridge, black mixing into gray) which will ruin the cartridge.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Storing downloaded movies for later use.

I'm being deployed, and would like to purchase some movies to take with me. Unfortunatly the laptop I'll br taking does not have a lot of hard disk space.
Can I download movies to, or transfer them to either a cd-r/rw or a dvd using my desk top or to a cd media using the Toshiba laptop for future viewing on the laptop? Erasing and transfering the movie files as necessary.
Thank you
Col Mom

You can back up your video files and then reload them to a properly authorized computer later. You just can't burn them to a DVD for playing on a standard DVD player.
Best of luck.

Where are mobile Illustrator draw files stored for later use in Desktop Illustrator?

Hello,
who can tell me, where Mobile Illustrator draw vector files are stored for later use in Desktop Illustrator? In the cloud there are only .png and .jpg files. The Files are sent immediately to the desktop software, but when I want to use them later, I cannot find them anymore.

What exactly are your steps?
Create new file in Draw
Draw something
Send to Illustrator
... and then? Does Illustrator open on the desktop? What do you do with the Draw file?

Best method for timestamping? (for later use with perl script)

What is the best method that I can use to timestamp events in Linux for later use with perl script?
I am performing some energy measurements.. where I am running several tasks separated by 20 secs in between. Before I start any execution of tasks, I always place initial delay for me to start the script and start the measurement device.
My problem is that I don't know how long is that first delay exactly. So to solve this, I thought I could use date commands to time stamp all tasks.. or at least to timestamp first dela.
Here is example of what I am doing:
1st delay
task 1
20s
task 2
20s
task 3..... etc
What would be the best to use?

logger.
It posts messages straight to the system log. You can see the message, in all its glory using tools like journalctl. You will see the message, the date, time, host name, user name, and the PID of logger when it ran.

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

You should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

XML parsing (KXml) - how to save parser's position for later use?

Hello.
I am parsing an xml file using KXmlParser and i want to keep the position of the parser for later use so i can continue from that same position.
int eventType = parser.getEventType();
        if (coupletForm!=null) {
            coupletForm.deleteAll();
        while (eventType != KXmlParser.END_DOCUMENT) {
            if (eventType == KXmlParser.START_TAG ){
                String element_name = parser.getName();
                if (element_name.equals("couplet")) {
                    coupletForm = new Form("Couplet 1");
                else if (element_name.equals("lead_one")) {
                    while (eventType != KXmlParser.TEXT || (eventType == KXmlParser.TEXT && parser.isWhitespace()) ){
                        eventType = parser.next();
                    //Now reached <description> element
                    coupletOptions = null;
                    coupletOptions = new ChoiceGroup("Choose lead:", Choice.EXCLUSIVE);
                    coupletOptions.append(parser.getText(), null);
                    parser_stack.push(parser);
                else if (element_name.equals("lead_two")) {
                    while (eventType != KXmlParser.TEXT || (eventType == KXmlParser.TEXT && parser.isWhitespace()) ){
                        eventType = parser.next();
                   //Now reached <description> element
                    coupletOptions.append(parser.getText(), null);
                    coupletForm.append(coupletOptions);
                    parser_stack.push(parser);
                    coupletForm.addCommand(CMD_NEXT);
                    coupletForm.setCommandListener(this);
                    display.setCurrent(coupletForm);
                    break;
            eventType = parser.next();
    }What i am doing here is parsing the xml file. When the parser finds an element with name <lead_one> it continues parsing until it finds the next element (<description>) and then creates a ChoiceGroup with the first option as the text found in the next element. I want to keep this position of the parser. The parser then continues until it finds element <lead_two> and does the same thing as <lead_one>. I want to save the positions of the parser when it stops at the <description> element. I am trying to do this using a stack, but this doesn't work.

If you want to select nodes based on changing criteria, you should use XPath.
If you have relatively fixed criteria, iterate over the nodes and pick out the ones that you want. For example:
public static List<Element> getChildren(Element parent, String tagname) {
    List<Element> result = new ArrayList<Element>();
    NodeList children = parent.getChildNodes();
    for (int ii = 0 ; ii < children.getLength() ; ii++) {
      Node child = children.item(ii);
      if ((child.getNodeType() == Node.ELEMENT_NODE) && tagname.equals(child.getNodeName()) {
        result.add((Element)child);
    return result;
}

564 black ink - printer using photo ink for general printing!

I ran out of regular black ink for my Photosmart C6380 a couple of weeks ago. Had a full cartridge of photo black, but none was used - pages were very faint gray. After replacing the empty cartridge with a 564XL, I see that my photo black is now half empty while the regular black ink is full and has not been touched at all!! Where's the confusion? How do I make the printer draw from the standard ink cartridge instead of the photo? It won't work without every cartridge in place.

Hi Selig,
Thanks for posting you issue on forum,
From what i understand you would like to Print use black ink only instead of photo black.
You have an option under the printer driver which says Black ink only, by selecting that you will not be able to print color. On most cases this should help you use the black cartridge over the photo black.
If you have to print color you might need to change this option,
I dont have the printer over here but the steps are from best of my knowledge.
Go to Control Panel>> Devices and Printers>> Highlight Printer>>Right click on Printer and click Printing Preferences.
Click on Advance>>click on the drop down for Print in Greyscale and select Black Ink only
with newer driver we have this option under Printing Preferences>>Paper/Quality tab and under Quality settings.
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

Photo Ink for 7510

I've never once printed on photo paper. Always use black draft whenever possible, but for reasons I've never understood the photo cartridge depletes. I'm at the point where the regular black ink is streaking. But, the clean heads utility won't work unless I buy yet another black photo cartridge. I just don't understand this. I want to print in draft black, and occasionally "best". Can someone help me out? Thanks.
This question was solved.
View Solution.

Your printer uses separate ink supplies and printhead assembly. If the printhead is allowed to run dry it may be damaged, resulting in expensive repairs to restore functionality.
Some ink is used to keep the printhead healthy, the document here explains how ink is used in HP (and other manufacturer's) printers. In the vocabulary of that document your printer is an IIC printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to continuously do AOAI and buffer the data for later use?

Is there a way to do simultaneous AI and AO and keep the data in the buffer until I am finished with reading, then read the buffer and save the data to disc. I want to acquire 1000 scans on up to 10 chanels at 10 000 Scans/s, while generating one output signal.
I have seen plenty of continuous AIAO examples, but all they do is show the data. I don't mind not viewing the data, all I want is to hold it for later analysis, while avoiding writing to disc as I fear this will slow the process too much. Or would a different approach than simultaneous AIAO be more appropriate?
I am using LabView 6.1 with 6024E DAQ card on a P-IV 1.5GHz.

Use this vi MainProg.vi in the llb
i use a same engine to acquire at 2 MS/s and generate at 3 MS/s
"Fil" a ?crit dans le message de news:
506500000008000000C8620000-1031838699000@exchange.ni.com...
> Is there a way to do simultaneous AI and AO and keep the data in the
> buffer until I am finished with reading, then read the buffer and save
> the data to disc. I want to acquire 1000 scans on up to 10 chanels at
> 10 000 Scans/s, while generating one output signal.
> I have seen plenty of continuous AIAO examples, but all they do is
> show the data. I don't mind not viewing the data, all I want is to
> hold it for later analysis, while avoiding writing to disc as I fear
> this will slow the process too much. Or would a different appro
ach
> than simultaneous AIAO be more appropriate?
> I am using LabView 6.1 with 6024E DAQ card on a P-IV 1.5GHz.
[Attachment 4x10KSps to Disk& generate AO.llb, see below]
Attachments:
4x10KSps_to_Disk&_generate_AO.llb ‏128 KB

Using Photos- prep for first use

Hi. I want to put photos on my iPad for portfolio purposes mostly and was wondering if it would be most efficient to create albums in iPhoto that are 72dpi only for iPad use, then sync to iPad? I would probably use and then dump other similar images (such as a client's session), but play a nice slideshow for them fullscreen.
If this is most efficient, what are the dpi and pixel specs that are optimized the best? I have read that the sync alone optimizes a photo, but I am not sure how exactly.
Thanks for any tips or links in the right direction!

The process you described allows you to take photos on your computer and move them to the Pad using the sync function. I can't find any place where I can select the option of taking photos that were imported directly onto the iPad, do not yet exist on the computer, but I want to select to sync from the iPad to the computer.
Right now, the only way that I can get Photos that were loaded directly onto the iPad copied to the computer is to go to iPhoto and select photos on the iPad to be imported (as I would with a direct connect of a camera or a flash card to the computer). IPad Syncing doesn't seem to "synchronize". What it seems to do is to take whatever you have selected on your computer for syncing and copy it to the iPad (with the exception of iPad apps which do seem to synchronize both ways).
Am I missing something?
Thanks.

Archiving to DVD, but want it for later use

Hi,
I have read a number of posts about archiving footage, but either I am daft or my specific concerns haven't quite been answered.
I have a number of short clips (20-25 minutes) that have filled up my hard drive. They are all above DVD storage limitations, but I need to take them off. However, I am not totally done with them. I may want to re-edit some of them later.
The other posts seem to suggest my only options are re-exporting them to tape or getting an external hard drive.
Is there no other way?

What other way are you looking for???
Back up methods:
1) Back up tape drives. Most reliable, extremely cost ineffective for individual use.
2) Back up video to miniDV tape. Best option to archive video material. Cost effective but time consuming.
3) Use hard drives. Depending on the frequency of needing hard drives, purchasing a hot swappable case can be beneficial. Hard drives are inexpensive per GB, the fastest of all options, and fairly reliable.
4) Optical Media. The least reliable of the back up options. Time consuming sorting and burning media. Cost per GB is comparable to hard drives but seems less expensive as you can by a spindle of 20 discs for less than a hard drive.
If there is another back up option, I don't know of it!
Mike

How can I save a named filter and sorting for later use?

I regularly do several different complex filtering and sorting on large tables. I did not find a way to save them for later one-click reuse. So I always have to do it again, which is time-consuming and error-prone. Hoped to get a solution by AppleScript, but filter and sort is not accessible by scripting.
Is there a way or does Apple have it on it´s agenda for future versions of Numbers?

Hi Jan,
filter and sort is not accessible by scripting.
There is some support for sort (and less for filter) in Numbers 3.
Table has a filtered property.
And you can sort.
A sort example can be found at https://iworkautomation.com/numbers/table-sort.html.
Not sure if this will be sufficient to handle your needs, but just wanted to point out there is some scripting support.
SG

How can i cut down the video's i've shot to only have the best parts in them for later use

first thing I was wondering was. I upgraded to the premiere user to where I have 20mb of storage but I take a lot of spearfishing video's and photo's and the 20mb is just about full. I see I can buy more memory but should I just get a external hard drive to keep all my photo's and video's and if I do that is it easy to get the materials that I need for me to create my new projects in premiere elements or should I just buy more memory. the second thing I was wondering is that I take a lot of spearfishing videos and each dive can be 15min long but only have about 4min of action footage that I actually use. so my question is after I download the video's from my camera can I go through them and extract the good footage and save it like that for me to use at a later date in my projects. it would save a lot of time and a lot of memory to be able to do it this way and if I can how do I go about doing it. thank you for all your help Cory

"I download the video's from my camera can I go through them and extract the good footage and save it like that for me to use at a later date in my projects."
This is the very definition of video editing, Cory! That's what the program is designed to do!
If you need some help with the basics of this program, I've created a free 8-part Basic Training series of tutorials for Premiere Elements support site Muvipix.com. That may be the best place to start.
http://forums.adobe.com/thread/537685
The most important step in any project is setting up the project settings to match your source video as precisely as possible. I cover this in part 1, so watch it carefully. I go into greater detail on setting up a project and capturing, editing and outputting video in my books, if you're interested.
As for Photoshop.com, I'm not sure it's worth buying more than 20 gig of backup space online at this point. You'd be better off investing in a good, large second hard drive for your media and project files. Save the online backup for your finished pieces.

Importing footage from sony HDR-SR12 to External for later use in imovie?

Hi all, I have a question, I would like to save my movie footage which is on my sony HDR-SR12 to a external drive(G Raid1TB) so I can view and also import clips to imovie for making movie's later. I have partitioned the Ext HD 150gb for photos and 781gb for movie footage. Just out of curiosity I mounted my camera and pressed get info and the format on the sony camera is MS-Dos(fat32) does this matter at all? Also which is the best way or how do I import the footage from sony hdr-sr12 to the external Hd. I have never done this before so your help would be greatly appreciated, I don't want to mess up.
Thank You
Jess

I should have mentioned, it is a good idea to make an archive copy of your AVCHD footage before importing. You should be able to do this from the FILE menu in iMovie. This will preserve the AVCHD files exactly as they were on the camera.
When you import, you convert the AVCHD files (which are highly compressed) into Apple Intermediate Codec, which is suitable for editing.
If you want to make sure that your archive copy is working properly, you can import from your archive copy, rather than importing directly from the camera. This is a good way to make sure you have a good archive copy before erasing the video on the camera.

How can I save a clip for later use?

When I am editing a project and going through my footage I often find a short clip that I'd like to use maybe later in the timeline or possibly to use in a different project. How can I do that?
This may be obvious but I want to rename and save that clip somewhere (I'm assuming the event library) so do I have to create a new clip from the original and save it or what?
Again, sorry of this is basic but its these litle things that seem to be the hardest to find out but make the biggest difference to the workflow and editing speed.
Cheers

If this is a one-off thing, mark the clip as a Favorite.
http://help.apple.com/finalcutpro/mac/10.0.6/#ver30ccd91f
If you have a volume clips that you notice would be good for a particular purpose later, mark them with a keyword.
http://help.apple.com/finalcutpro/mac/10.0.6/#ver68416335
Then create a Smart Collection that contains clips with your keyword.
http://help.apple.com/finalcutpro/mac/10.0.6/#ver7a77eb6c

Storing photo ink for later use

Similar Messages

Maybe you are looking for