StorLib error message in the Lenovo Solution Center

I keep getting an error message under the device manager tab in the Lenovo Solution Center.
It says under drivers - 'StorLib bus (virtualstorage support)', status is 'Uninstalled'.
I can't find anything anywhere about this or how to correct the issue.
Any help out there?
Moderator Note; subject edited.
Solved!
Go to Solution.

The device manager pops up the screen with all the 'devices' . When I expand 'other devices', the storlib bus shows up with a yellow triangle and ! mark. Double clicking brings up a window, with status;
"The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver."
When I try to update it, no driver can be found.
One option os to uninstall it. Guess that would get rid ot the error if it is something not being used.

Similar Messages

Geting Error message while in Lenovo Solution Center window

Getting a error message when clicked on Device Manager Icon
"LSC is unable to run because a required file is missing"
Please help resolve ASAP
Shanks

Hi Shanks,
Welcome to Lenovo Community!
I’m sorry to hear that you are having the issue with Lenovo Solution Center.
I would like to request you to reinstall the Lenovo Solution Center to resolve the issue. Please uninstall the current version of Lenovo Solution Center from uninstall or change a program option from control panel and install the latest version of LSC.
Please click the below link to download the application based on the requirement of the OS version.
Lenovo Solution Center for Windows 8.1 (32-bit), 8 (32-bit), 7 (32-bit)
Lenovo Solution Center for Windows 8.1 (64-bit), 8 (64-bit), 7 (64-bit)
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Error message on desk top, solution Center.

I keep getting an error message about the solution center. It cannot detect the correct path. I've had this printer for over one year. Can I delete the solution center without causing my printer to stop functioning ??

Hi and Welcome to the Community!
With only that limited information (e.g., no organizer app nor version, no version of the Desktop Software, etc.), all I can think to do is provide this:
KB12268 Synchronization support for BlackBerry Desktop Software for Windows
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error 1721 on repair/uninstall/reinstall of Lenovo Solution Center Windows 8 64-bit

Hello,
I am seeking a solution to a problem with Lenovo Solution Center on a Lenovo W530 machine running Win 8 64-bit.
It was not updating the warrantee information, and so I attempted an install with the newest version of the program. It refused to uninstall. Lenovo support then decided that the best approach was to eliminate the directory containing the program.
Now I still have the program listed in my installed programs, but there is nothing I can do with it. It does not appear on my desktop (not surprisingly) but does not uninstall and using the new install package does NOT provide the option of install, but solely to uninstall or repair, neither of which works - giving the error 1721 message.
Next steps? (Tier 2 was to phone me over 1 week ago - no call....).
Gary
Solved!
Go to Solution.

After trying al the hints without effect, the last hint with the "MS FixIt"
-Tool finally solved the problem!!!!!
It found 2 older {xxxxxxxxxxxxxx} registry entries from 2 former manual
updates which caused the problem. I had to run it 2 times for removing all
error-causing problems.
After that ,the last version of the Lenovo Solution Center Windows 64-bit
package was able to install perfectly and is now running without any
problems .
This solution I was looking for the last 3-4 months!!!!!!!
Thanks very very much ,for your perfect & profound help!
May I post this full solution letter of yours into the Lenovo forum,plse.??
I saw many people with the same 1721-fault searching for help too!
Again many thanks
Yours sincerely
Norbert Esch

Lenovo solution center errors out on launch for task bar

Whenever I open the Lenovo solution center, I get this error.
Http Comunication Error
The following Monitors has encountered some error:
JSON parsing failed: LargeEnterpriseMonitor
Then, it will periodically crash until I restart.
This is a new G505 (3 months old). It has done this on Win8 and it still does it on Win8.1
Also note the extensive spelling errors and grammar. I'll live with that if I can get by the errors

Hi Mikend,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the LSC (Lenovo Solution Center) is displaying an error message even after upgrading to Windows 8.1 in your G505, I suggest you to re-install the LSC for the Windows 8.1 while installing right click on the downloaded LSC file and select “Run as administrator” and check if the issue persist.
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo Solution Center install problem - Error 1721

Hello, I'm trying to install Lenovo Solution Center to my computer again, after not properly uninstalling it. I simply deleted the files and repaired the registry thinking that it would be fine, and it is not.
I'm getting the Error 1721 upon installing, installer tries to execute 'KillProcessLSC.exe' under Lenovo Solution Center folder and it cannot, since I deleted them. I need the files under Lenovo Solution Center folder so I can make the installer pass the 'Killing LSC' step, or at least think it passed.
I got the idea to fixing it from this post. The guy restored the files from Recycle Bin and installer worked just fine. Since I already cleared my Recycle Bin and I did this over a year ago I cannot get the files from recycling. I simply need the files so I can make the installer execute the program it wants and passes that step that I get stuck on. If any other solution is available I'm free to try it, otherwise I'm pretty much sure putting the files in the Lenovo Solution Center folder will fix it. Thanks.

@bl8demast3r,
Your post 1 stated:
Whenever I try to run the hardware scan I get the error:
"Lenovo Solution Center service is not available. Please restart the application, or reboot your computer if the problem persists."
Your later post mentioned Scheduled scan, I assume LSC hardware scan.
===
Lsc during the last year has had issues where LSC software fails during a manual run of hardware scan. Symptoms include Lsc service not available. You have the latest version of LSC. Monitor what you see and post back if the "service not available" screen shows up. Describe if this hardware scan was done manualy or a result of the scheduled monhtly run.

Lenovo settings dependency package & Lenovo Solution Center

The Lenovo Solution Center showed error message about Battery on System tab,and suggested to install the Lenovo settings dependency package.But there is no Lenovo settings dependency package in the download page for T61p but yes for other models.In the attached Readme.txt, T61p is not supported model.What should I do?What do you think? Thank you for your attention.

Yes, I use Windows 8.1.I'll try to install that package as you recommend,and report weather any problem occurs or not.Thank you, ColonelONeill.

Problem with Lenovo Solution Center for Windows 8.1

Hi,
I reinstalled my Laptop. I wanted to install the Lenovo Solution Center for Windows 8.1 (64 bit).
(I installed it with the necessary administrator priviledges.)
But it didn't work.
I am getting the following error message.
Can anyone help me with this problem. Thanks in advance.
Best regards,
Jens.

This one?
http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-73784
Cheers.
If I helped you, please give me some kudos! ^^

Lenovo Solution Center Showing Wrong Warranty

I bought my Lenovo G500 laptop in December 2013. It has 1 year warranty. Today I installed Lenovo Solution Center and saw that it shows wrong warranty.
According to Lenovo Solution Center, the warranty is set to expire on September 22, 2014. But its wrong since I bought the laptop just around Christmas in 2013.
Solved!
Go to Solution.

Hi Mayank,
Welcome to Lenovo Community Forums!
There was an initial bug in LSC where extended warranty was not accurately shown and this was addressed in version 1.1.006. Several changes to the functionality of warranty lookup have been implemented in different versions of LSC to address other considerations.
In some cases, the Lenovo Solution Center is displaying a message, “Unable to determine warranty”, for the System and displaying a message, “not available”, for the Battery.
This could occur on any Lenovo system running Windows 7 or 8 and running LSC.
These will be solved in version 2.0.018 or higher of LSC.
Warranty status can be checked on the Lenovo support site at any time:
http://support.lenovo.com/en_IN/product-service/warranty-status/default.page?
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo Solution Center Alert

Hello all,
I just bought the Lenovo Yoga 14 and I keep getting an alert from the lenovo solution center. The alert is about hard disk free space, saying that the hard drive has less than 9.5% of its capacity. Why would that be an alert? Plus I just bought it so the hard drive should be empty anywyays. After checking out the problem, it appears to be that the ssd is the one leading to the alert(I thought that the caching ssd was used mostly for launching apps and programs anyways). Has anyone had this problem before?
Thanks,
Guillermo

Moved.
I'll need to defer to members with similar hardware to yours to weigh in on your questions. You may also want to browse through threads in the ThinkVantage Technologies forum for more on LSC.
Hope this helps.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Lenovo Solution Center Hardware Scan WHD001V002-RJ7ACJ

I ran the Lenovo Solution Center Hardware scan and got a "Hardware scan has detected one or more failures.
Result Code: WHD01V002-RJ7ACJ
Device: Liteonit-LITEONITLSS-24L6G-SOC41176Z1ZSDW034563
Computer: Lenovo ThinkPad S431 (20AX-000MUS)
OS: Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-3687U CPU @ 2.10GHz
8GB Ram
I have attached a screen shot for more information below.
What device is failing?
If it is failing, what is the next step?
Moderator Note; picture showing system s/n edited to prevent possible abuse

Hi iPhoneHome1,
Welcome to Lenovo Community!
I am sorry to hear that you are facing the issue with Error code from Lenovo solution center on ThinkPad S431.
We have verified the screen shot and the issue is related to SSD drive, we suggest you to take all the necessary backup of all your personal data including Windows 7 recovery to DVD disc or USB flash drive.
And as per the snapshot your system is under warranty, hence I would suggest you to visit nearby service center to get it rectified.
Please click here to visit the Lenovo support link and select your region to get the contact number.
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo Solution Center disappears from taskbar upon restart

I am using a Lenovo Thinkad Twist with Windows 8. I currently have set the Lenovo Solution Center to appear on my taskbar under the taskbar properties. However whenever I restart my computer, the taskbar somehow 'forgets' my settings and the Lenovo Solution Center disappears from my taskbar. I have to manually select it again under taskbar properties.
This does not happen if I shut down the computer and turn it on again, it only occurs when I restart it. Any help? Thanks!

I have not seen this problem myself so I asked LSC team about it. They said they have seen it once but they rebooted and then LSC worked after that. I assume you tried rebooting and the problem still happens?
There is a log.txt file inside folder "%appdata%\LSC\Local Store", can you please put it in dropbox/yousendit/etc and post the link to the file here? thanks for your help.

Lenovo Solution Center Toolbar Button Brings Up SimpleTap

All of a sudden the LSC button has started bringing up Simpletap instead of the Lenovo Solution Center. Not sure if this is related to one of the recent TVSU updates or the WIndows Updates (which broke my toolbar buttons in Quicken).
Solved!
Go to Solution.

It seems Lenovo Solution 2.3 is doing this. This is an update that was released this week. This is only happening on systems where SimpleTap is already installed, on new systems just installing or upgrading to LSC 2.3 this is not happening.
However, I too would like to turn this off and I believe I've seen this before, but can't recall how to fix it.

Lenovo Solution Center Windows 10 On Thinkpad Edge 15

Just upgraded to Windows 10. Ran Windows Update from Control Panel a couple of times. However, the Lenovo Solutions Center alerts showing Windows Upgrade never done. When I click on "launch" or "Windows Update" nothing happens. The is on a Thinkpad Edge 15. I was hoping to find a download for the Lenovo Solution Center software thinking I could delete it and then download it and reinstall to solve the problem. Obviously if there is another way that would be nice to know.

I have same problem on a diiferent model Lenovo desktop PC. If you want to try reinstalling the solution centre software, you can find it here: https://support.lenovo.com/us/en/lenovodiagnosticsolutions/tools/lscoverview Let me know how this goes, I might also try this myself.

Lenovo Solution Center says Windows Update needed Windows 10

Thanks for your help, I have the Lenovo B50-30 AIO and recently upgraded from Windows 8.1 to Windows 10. Everything seemed to go flawlessly with the exception of one small problem. I am constantly being nagged by the Lenovo Solution Center to Update my Operating System. When I run Windows update, it says 'No Available Updates', yet LSC still nags me with that screen. When I go into LSC and click on the Launch button to fix the problem, nothing happens. Is this a problem with LSC or is there something that I am doing wrong?

All,
I've shared this conversation with our LSC development team and here is how I understand the siutation...
LSC 2.8 was tested with Windows 10, but this situation occurs because Windows 10 does not fill in the update date after the OS install. After 1 day, and the date changes, the symptoms should go away.
We are working on improving this in the next version fo LSC 3.1 which is a few weeks away...
Edit:
Speedwell, I've also noted the launch button issues with the team to re-test and make sure works properly.
Update 8/5/15 - confirmed launch button issue on 2.8.5 and lower. This is going to be addressed in a new version.
An interrim support tip is being released on our support site to explain the work around:
1) Navigate to taskbar
2) Type "Windows update" in teh search the web and windows field
3) Select "Check for Updates" at the top of the search results
4) The Windows update will appear
5) Select check for updates button
Apologies that this did not work as intended, and I appreciate your patience as we release an updated version.
Best regards,
Mark

StorLib error message in the Lenovo Solution Center

Similar Messages

Maybe you are looking for