Storm 1 dies after 2 min call on full battery

I've been trying to get a response to this question and have received nothing yet.
my storm1 dies after a 2 minute call - even when the battery is full, a call comes in and withing 2 mins the phone shuts itself off and sometimes restarts with the battery icon red, I get a message saying the battery is too low for radio signal. I don't have any apps running in the background, I ensure that the phone is locked so that the backlight goes off. Still it dies - any help please!!!!
My Core Application is 5.0.0
System software is 5.0.0

Assuming that you are running iOS 4 or higher .....
There could be any number of reasons why the battery is losing the charge so quickly. If you constantly have Location Services, and Notifications turned on - and depending upon the frequency that the iPad is set to Push email notifications, along with the number of apps that may be running in the background ... all these factors impact battery drainage.
These two articles are worthwhile reading for you and will give you a great deal of insight on how to best charge the battery and how to get the most out of battery life.
iPad Battery
http://www.apple.com/batteries/ipad.html
Charging the iPad Battery
http://support.apple.com/kb/HT4060
One thing I recommend for you to try is to quit open/recent apps. You do this by double tapping the home button to bring up all of your recent/opens in the task bar at the bottom of the iPad screen. Tap and hold down on any of those icons until they all wiggle. Then tap the minus signs in the upper left corner of the icons to close the apps. Close all of them, then tap the home button twice. Now restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut down. Hold the sleep button until the Apple logo appears to power up again.
This article may be helpful as well for you to read about how multitasking works.
http://support.apple.com/kb/HT4211
After you do this, and you read and heed the advice in the two support articles, see how your battery life is now. There could be other issues involved, but start here.
Message was edited by: Demo

Similar Messages

IPhone 4 randomly dies after update to ios 5 battery still full

My iPhone 4 worked flawlessly before I updated to ios 5 now it randomly goes into a deep sleep and have to do a hard reset to turn it on. Happens about twice a day. Any suggestions?

Ok guys i got it fixed:
1- close your iphone by holding the power button for few sec (10-20) till the phone turn off.
2- open itunes and plug you usb wire in your mac/pc but do not plug it in the iphone yet.
3- push and hold the home button of the iphone and plug your usb dock in, you must hold the home button at the same time.
4- now itunes will reconize your iphone and will ask foe a recovery.
5- follow the step for the recovery process (your last backup)
6- happy :) but you will maybe lost some of the last data.
I hope that will help.

Full battery dies after 30mns, 1 hour later appears full again...?

I have my ipod strapped to my arm when i go biking.
After approx 30 mns it runs out of power, and i am unable to restart it.
When i get back home, i can turn it on again after abt 30mns/1hr, and battery is shown as full.
It then keeps playing for hours (i.e; like it would with a full battery)
The only reasonable answer i could think of is that this due to temperature,
meaning the battery goes cold & thus no longer fuctions.
However at the moment it's around 18°c outside so this hardly can be the problem....?
I'm baffled...

Apple has a Battery replacement program, for just $59 (shipping additional $6.95)
But hopefully you have tried the Hard Reset, as below
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Yesterday, One guy, did a Hard Reset, and it solved his Problem of not able to play 2 songs on the iPod, after a few days of suggestions and troubleshooting
Have a nice day!.

Storm 9530 problem. Shutting Down on full battery

Hi, I have a storm 9530 which has worked alright for me for a little over a year now. Then one day my phone started shutting down on me in the middle of any kind of use. To be more specific if I am on the phone making a call, I can go no longer than 10-20 minutes before my phone shuts down on me on a full battery! It will be at 100% then when I start to do things like make a phone call, or do some texting for 10-20 minutes none stop, use an app of any sort for more than 10 minutes, basically any kind of extended use and my phone will shut down on me. Then it will start to reboot and sometimes it will turn back on but then will have only 20% battery or other times it can't even start back up until a battery pull and being plugged into a charger. Now I have my phone almost always on a charger whenever I need to use it and it is getting really annoying having it shut down all the time. The phone does get hot at times when running these apps, music, phone call etc...What is going on here?? Has my phone gone bad? Do I just need a new battery? I am running the v5.0.0.328 (platform 4.2.0.128). Please HELP!!
Solved!
Go to Solution.

Hi and Welcome to the Forums!
All of the diagnoses you have mentioned are possible. But, further testing is needed to determine which is correct. I suggest you find a known-good battery -- preferably one from a friend with the exact model BB you have who is not presenting these symptoms. Trade batteries. If the behavior follows the battery, then the battery is the cause and you should obtain a new one. If the behavior remains with you, then your BB is the cause...but what part of the BB is yet to be determined.
To find out what part of the BB is the cause, there are several possible diagnostic processes you can go through. Specifically, you need to isolate if the problem is hardware or software (e.g., 3rd party app conflicts). The cleanest way to determine that is to completely replace your device OS with a new fresh copy and leave all add-ons off. Then start putting add-ons back, leaving adequate time for usage between each add-on install. Once the behavior returns, you then know your culprit.
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My ipod mini shows full battery life...but it keeps saying that its dead.

hey I just took my ipod off its charger, I have an ihome...and it was on it all night and most of the day charging. I went to turn it on and it showed that it had full battery and then I started playing a playlist and on the first song it played it stopped the song and said that it didnt have any battery life left. then just now I turned it back on it looked like it had almost no battery life. then after a song had played a lil bit it goes back to full battery. Then later after its been played for about maybe a half an hour if that it dies again for good. untill I charge it back up and start the whole thing over again. now I know these things last longer then a half an hour, am I right? its also like 2 years old.
please! some one help me or tell me what I should do because Im about ready to trash the thing and buy a new ipod! and its past warrenty.

you can replace your battery for like 30 bucks. There are instructions on the web and quite a few websites that sell replacement batteries. Check the web for an hour or two. Don't spend another 250 when you can have it back ready to rock for a lot less. Apple just wants your 250, don't give it to them. It's highway robbery, look at cell phones, they need replacement batteries every 2 years or so. And $30 for a replacement li-ion battery is a total steal these days...

Ipad shuts off and restarts after 3 to 4 minutes even with a full battery.

My Ipad will shut off after 3 to 4 minutes even with a full battery and whether it is being used or not. then it will power up again on its own. This also occurs when the charger is connected and when I have it connected to my computer.

First try to Reset all settings if this does not fix the issue - No data Loss
Settings>General>Reset>Reset All Settings
If Not You need to restore the Device - Data Loss
connect your device to Computer and Click on Restore under summary
Reply if you want to know how to save the data if you have decided to restore the device

Iphone 4s shuts off when it has a full battery and says its dead. This started happening right after a screen replacement.

I have an iphone 4s and ever since the screen was replaced. It has been shutting down with a full battery saying its dead. Can someone help me?

Hi Dcp019,
There's a section in this article for power issues like unexpected power off.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
If the issue started after a repair however, you may want to check with them about the repair.
Best regards,
Nubz

3gs reboots after 4mins on calls and shows battery dead then shows battery charged on restart any 1 have a fix please

3gs reboots after 4mins on calls and shows battery dead then shows battery charged on restart any 1 have a fix please

Thought it had worked but soon found out it had not.
after further days of trying finally, solved it for me Yesterday.
turned off notifications when locked, and bingo, wow.
i have not turned off iCloud but location services are also off.
best thing to do I found was keep checking your usage, settings, general, usage, and flip down to bottom, if the standby and usage are similar there is a problem, if there is a big difference then all is ok. Just keep turning things off and on until the difference is very apparent.
something on my phone was keeping the phone alive even when turned off, and I think this was the phone repeatedly trying to update continually.
to me this is definitely down to the iOS, my wife has exactly same phone and iOS but hers doesn't have any problem and the battery lasts for days.
the guy at the Genius Bar told me to restore the phone via iTunes, not iCloud. This is because iCloud remembers the exact info from your phone and simply reinstates it when you restore, and this includes the iOS too.
when I get home from holidays that's what I'll do, or wait for iOS 8 in few weeks. But I'm so pleased I finally made it work, I was beginning to think ditch the phone and buy Samsung.
anyway anyone out there please try my final solution and let me know if it works for you?

Macbook Pro won't login after sleep (sleep with low battery -- mac turned off maybe it's called save sleep)

Macbook Pro won't login after sleep (sleep with low battery --> mac turned off maybe it's called save sleep)
So if I hit the powerbutton my mbp booted like it is booting from the save sleep (so very fast and the login screen is there in about 10 sec.and there is no apple logo while booting just the desktop screen in "unsharp" ore foggy however...)
Then when i see the login (if the keyboard backlight turned on) i wand do tipe in my code but it won't work... the trackpad is not working; and when i plug-in a usb mouse the mbp is not powering on the usb-mouse (laser is off)
Why is that this way?
Is there n option to wake up the mbp fromm deep/save sleep without haveing issiues after that?
THX

Sorry for such a long delayed response...
I was able to get to an apple store this past weekend, and let me tell you... I'm about finished with there great "support".
Right before I went to the store, I tried to eject a disk. Well the cloth in the SuperDrive (I assume to protect the drive from dust and such) Pulled up with my disk. So I get the Apple store, describe my problem and what happened with the cloth piece. The "Genius" writes up a form and tells me they have to run diagnostic and it will take a couple days... and I will get a call when its done (1-3 days).
Well on day number 3 I called up the store and they told me it was ready to be picked up? I asked if anything had been fixed and they told me they could not reproduce my "sleep issue", so they couldn't fix that.. but told me the cloth piece in the SuperDrive had been fixed.
I drive an hour (one way) to the Apple store to find that all they did was PULLED OUT the cloth... they did not replace it! So basically I have a hole for a Super Drive.
I asked why I was not called to say that my computer was ready to be picked up... didn't get an answer on that one.
I asked why my SuperDrive was said to be fixed, when nothing was done... they told me that it would have to be sent out to the factory store for that to be fixed (FIRST TIME THEY MENTIONED THAT!) Oh, and that would take 5-7 business days. Well that's not going to happen right now considering I'm a college student that NEEDS a working computer!
So I go home, angry... start just putting all my important documents back on the computer. And the screen starts blinking!!!! I guess now I have the same thing described in another post on these forms...
Lets just say that I'm not very happy with Apple right now! If anybody else has success on either the sleep issue or the screen blinking issue, please let me know!
Thank you!

Calls have been dropping out mid-call (after initially working) with full reception since upgrading my iPhone 4 to iOS5 (can hear them but they can't hear me).

Calls have been dropping out mid-call (after initially working) with full reception since upgrading my iPhone 4 to iOS5 (can hear them but they can't hear me). The call initially works but then after a minute or so, they stop hearing me, even though I can hear them. Sometimes it goes the other way and I can't hear them.
Please advise how to remedy ASAP.

PS: I have had full reception bars when this has occured on a 3G network in Sydney, Australia (3 Mobile).

My iphone 4s battery dies after a few hours after upgrading the software

My iphone battery dies after approximately 4 hours (with no use) after I upgraded to ios6 and, the phone heats up. This has been going on for about a month now and I've tried everything. Unfortunately, employees at the Apple store flat out refused to help noting, 'oh, just try restarting it, ios 6 doesn't have any flaws' (I've tried multiple times). Needless to say, 4 hours is not enough to warrant keeping a phone so if anyone has any (free) ideas, I would appreciate them greately. Thank you.

Any ideas on what I can do?

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge, after updating to ios 8.0.1

My iphone 4s automatically getting turned off (blank black screen) and not getting started until full battery discharge. Even on long pressing power button - screen doesn't showing anything - not even "needs charging logo".
This is happening only since I have updated to new ios version (ios 8.1).
Is there anyone facing similar issue?? Any suggestion?!?

Hi jayla_mora,
Thanks for visiting Apple Support Communities.
It sounds like your iPhone screen is going blank and not responding.
You may find the tips in this article useful for troubleshooting this behavior:
iOS: Not responding or does not turn on - Apple Support
Best Regards,
Jeremy

Ios 7.1 - Barrett life further gone down to the **** and call is full screen feature remived

Yesterday I have updated my ios to latest version 7.1 .
Now am thinking if returning back to downgrade my os or some other models .
It's irritating me a lot . My battery life totally gone . In standby mode fully charged mobile not even withstanding for
3 to 4 hrs . But they are promoting IOS 7.1 as better battery life and with out any information they have removed
The caller I'd full screen features which they have mentioned as a improvement in 7 and older versions .
Please some one help me out how to get rid off this . Now, my mobile is always connected to the charger and taking changer along with my mobile wher ever. I go .
I was so excited when I was upgrading for 7.1 . But here after I will never upgrade my iPhone with out getting complete feedback abt the
Latest release .
I never expected this from apple . They are completely removing all the good features from iPhone .
I am very much addicted to called if full screen , but now they have removed thise option in ios 7.1.
Hope those bugs will be cleared in the next update and waiting for that eagerly . If not look for some other options .
It's very difficult take my charger everywhere .

Hello, erose3686.
Thank you for visiting Apple Support Communities.
Battery life can be difficult to troubleshoot as multiple factors contribute to how long a charge can last. Graphic intensive applications, environmental factors, display brightness and data connectivity are just a few of the items that can cause the battery life to decrease rapidly. I would need to know a little more information about your usage patterns to give you and idea on how to maximize battery life. However, here are some tips on how to adjust settings and charge the device that may help.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
About Batteries
About iPhone Batteries
If you feel that you need assistance with the battery concern, you can always reach out to us via the link below.
Contact Apple
Cheers,
Jason H.

After 300 cycles, is the battery problem considered normal?

I now have the dreaded "Macbook won't work unless plugged in" problem. Mine does recognize the battery at various percentages up to 100% and will charge it if it runs down (which it slowly will in sleep mode as I can unplug it then). Purchased the computer on June 6, 2006 (very out of warranty), and just started with this "can't unplug" issue last week.
After trolling this and other sites I have reset the SMU and the PRAM several times. Removed battery looks normal, no warping, and I am always updated on the software updates, so the battery update has been installed for a while now. I run maintenance scripts regularly as well.
I have calibrated the battery several times in the past but cannot now as it will take several days on sleep to run it completely down, and I need the computer daily for work as I am self-employed. I have always let it run down in the past to sleep mode, then plugged it in. I never used it plugged in while at 100%, until now since I have to.
Coconut Battery (which I just started using) says I'm at 3526 mAh of the original 5200, 67% capacity on a 100% charge. Is this typical at this age and usage of battery?
So battery cycles are at 307, plus I'm out of warranty. Is this behavior (can't run unplugged though battery is at 100% or will charge if lower) typical after 300 cycles? In other words, do I have to buy a new battery every year to avoid this sudden shut off if the magsafe cord is yanked accidentally during my work?
And I have read of others who get their battery with the same issue changed out under warranty--only to have the issue recur shortly later. Am I going to drop serious cash on a battery that will leave me in this same predicament in just a few weeks into the future? I really need advice on this one.

redalicat wrote:
Thought I was preventing battery memory issues by running it off the battery so much, definitely won't make that mistake again.
The memory thing has been going around since the Ni-Cad days. Li-Ion doesn't have that problem thank goodness. Here is some info that may also help you with your next battery.
It is OK to leave your battery hooked to the charger most of the time. The only time I unhook mine from the charger is when I calibrate. You should calibrate your battery once a month.
The following links have good information about the MacBook and the care of it's battery.
MacBook reduces processor speed when battery is removed while operating from an A/C adaptor
Apple portable computer's battery does not show a full charge in Mac OS X
Apple Notebook Batteries
Lithium-ion Batteries
MacBook: How to remove or install the battery
Determining Battery Cycle Count
Use and cleaning of MagSafe power connector
Look here for some good tips about battery care.

Bad readings from DAQCard-6036E after DAQmxSelfCal() call

Hi,
I have a very urgent problem that I would like investigating.
I have a DAQCard-6036E and have noticed that, occassionally, after a call to DAQmxSelfCal(), the AI readings are incorrect.
All channels in my application are configured in differential mode, and the readings returned are occassionally wrong by ~9mV on channels with gain of 1, and ~0.9mV on channels with a gain of 10.
If I repeatedly call DAQmxSelfCal(), I seem to get the bad readings after about every 3rd call to DAQmxSelfCal() - then the next call will usually correct the calibration coeffns, and so on. I have not been able to establish an exact pattern to the problem, but have tried with the laptop on mains power, and internal batter
ies and the problem is the same.
Could there be a problem with the self calibration function in DAQmx, or could there be an external influence? When I call DAQmxSelfCal() my signals are connected to the card, but I assume the inputs get isolated from connected signals during the calibration routine.
Thanks

Hi Ed,
I got a loan DAQCard-6036E from NI and tried that and had the same problems. I am suspicious that it is something to do with my laptop, maybe the battery monitoring circuitry or something. Assuming that there is nothing wrong with the DAQCard 6036 internal design, my theory is that if the laptop generates noise while the self-cal is in progress then this can affect the calibration coeffns that are generated. This might be a rubbish theory, but believe me, the effect is genuine.
I would say proceed with caution, put the self cal in, but test it thoroughly by calling it repeatedly with a high precision voltage reference attached and check the returned values. Note that I only think this is an issue with DAQCards, I have not seen it with PCI cards, but then I have not tested these as much.
By the way, doing a self cal once per day is more than enough. Once per hour is too much. There is an article somewhere on NI.com that talks about the recommended interval. Make sure the laptop has been on for at least 15 mins first.
Let me know how you get on.
Regards
Jamie

Storm 1 dies after 2 min call on full battery

Similar Messages

Maybe you are looking for