Storm 1 dies in action!!
Hi. I was just writing a SMS on my phone when it suddenly freezer !!! Nothing seemed to work. I took the battery off and although the phone blacked out it seemed to work. I tried calling and it does work , but the screen is black !!!!!!
Please help !!!!
Did you actually open BlackBerry Protect and read the message there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
BIG PROBLEM!! nokia 6300 flashes repeatly and then...
Hi There, I hope someone on this forum can help me. I had used this phone about 4 months ago. Now when I want to switch it on, the following happens. 1. Blue lights on the sides light up. 2. Nokia startup screen comes up for about 1,5 seconds. 3. Screen goes blank. 4. White screen flashes 3 times. 5. Phone dies.
Actions Taken: I make sure that the battery was fully charged. I had removed the 1 GB Micro SD Card. I had replaced the SIM-Card. Then I turned it on. But it still the same problem. I wonder that it caused by viruses. How can I fix this problems? Should I reformat the phone and how? because it gonna flashed and then turn off repeatly. So sad.
very hope
shahThis is a software problem, i know you said you updated the firmware yourself but it is worth taking it to an Nokia Care Point as they use a different method for installing the software and is more reliable.
You can find the nearest NCP to you at the Store Locator
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left. -
Storm 1 dies after 2 min call on full battery
I've been trying to get a response to this question and have received nothing yet.
my storm1 dies after a 2 minute call - even when the battery is full, a call comes in and withing 2 mins the phone shuts itself off and sometimes restarts with the battery icon red, I get a message saying the battery is too low for radio signal. I don't have any apps running in the background, I ensure that the phone is locked so that the backlight goes off. Still it dies - any help please!!!!
My Core Application is 5.0.0
System software is 5.0.0Assuming that you are running iOS 4 or higher .....
There could be any number of reasons why the battery is losing the charge so quickly. If you constantly have Location Services, and Notifications turned on - and depending upon the frequency that the iPad is set to Push email notifications, along with the number of apps that may be running in the background ... all these factors impact battery drainage.
These two articles are worthwhile reading for you and will give you a great deal of insight on how to best charge the battery and how to get the most out of battery life.
iPad Battery
http://www.apple.com/batteries/ipad.html
Charging the iPad Battery
http://support.apple.com/kb/HT4060
One thing I recommend for you to try is to quit open/recent apps. You do this by double tapping the home button to bring up all of your recent/opens in the task bar at the bottom of the iPad screen. Tap and hold down on any of those icons until they all wiggle. Then tap the minus signs in the upper left corner of the icons to close the apps. Close all of them, then tap the home button twice. Now restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut down. Hold the sleep button until the Apple logo appears to power up again.
This article may be helpful as well for you to read about how multitasking works.
http://support.apple.com/kb/HT4211
After you do this, and you read and heed the advice in the two support articles, see how your battery life is now. There could be other issues involved, but start here.
Message was edited by: Demo -
Dispatcher dies after 1 minute
Hi,
I am on ERP2005 SR2, with Windows 2003 and MSSQL 2005 DB.
I have recently performed a database restore of the SAP database, but I am not able to restart SAP after this.
The dispatcher dies after about 1 minute. You will find the dev_disp and dev_w0 files below:
dev_disp file:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid T01
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 83
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4204
Thu Feb 08 09:02:37 2007
kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4204) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 83 successfully loaded
shared lib "dw_xtc.dll" version 83 successfully loaded
shared lib "dw_stl.dll" version 83 successfully loaded
shared lib "dw_gui.dll" version 83 successfully loaded
shared lib "dw_mdm.dll" version 83 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Feb 08 09:02:41 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5277]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapr3s_T01_00 <
DpShMCreate: sizeof(wp_adm) 11648 (896)
DpShMCreate: sizeof(tm_adm) 4663200 (23200)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1496)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000BDA0050, size: 5320400)
DpShMCreate: allocated sys_adm at 000000000BDA0050
DpShMCreate: allocated wp_adm at 000000000BDA1AB0
DpShMCreate: allocated tm_adm_list at 000000000BDA4830
DpShMCreate: allocated tm_adm at 000000000BDA4890
DpShMCreate: allocated wp_ca_adm at 000000000C217030
DpShMCreate: allocated appc_ca_adm at 000000000C21B680
DpShMCreate: allocated comm_adm at 000000000C21CDF0
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000C2A3A70
DpShMCreate: allocated gw_adm at 000000000C2A3AF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000C2A3B20
DpShMCreate: allocated wall_adm at 000000000C2A3B30
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Thu Feb 08 09:02:42 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( sapr3s) [dpxxdisp.c 11644]
DpStartStopMsg: send start message (myname is >sapr3s_T01_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 83
Release check o.K.
Thu Feb 08 09:03:22 2007
ERROR => W0 (pid 4732) died [dpxxdisp.c 14299]
ERROR => W1 (pid 2544) died [dpxxdisp.c 14299]
ERROR => W2 (pid 412) died [dpxxdisp.c 14299]
ERROR => W3 (pid 4944) died [dpxxdisp.c 14299]
ERROR => W4 (pid 2760) died [dpxxdisp.c 14299]
ERROR => W5 (pid 1004) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 4104) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2208) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3300) died [dpxxdisp.c 14299]
ERROR => W9 (pid 3312) died [dpxxdisp.c 14299]
ERROR => W10 (pid 4412) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4112) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 4336) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:32 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Feb 08 08:03:32 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4732 Ended no 1 0 0
1 DIA 2544 Ended no 1 0 0
2 DIA 412 Ended no 1 0 0
3 DIA 4944 Ended no 1 0 0
4 DIA 2760 Ended no 1 0 0
5 DIA 1004 Ended no 1 0 0
6 UPD 4104 Ended no 1 0 0
7 ENQ 2208 Ended no 1 0 0
8 BTC 3300 Ended no 1 0 0
9 BTC 3312 Ended no 1 0 0
10 BTC 4412 Ended no 1 0 0
11 SPO 4112 Ended no 1 0 0
12 UP2 4336 Ended no 1 0 0
Dispatcher Queue Statistics Thu Feb 08 08:03:32 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Thu Feb 08 08:03:32 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Feb 08 08:03:32 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:37 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapr3s_T01_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2584) (SOFT_KILL)
Stop icman
killing process (4720) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2584 HANDLE:516)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:38 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2584 HANDLE:516)
wait for end of icman
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:39 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:40 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:41 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:42 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:43 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:44 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:45 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:46 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:47 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:48 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:49 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4720 HANDLE:528)
DpStartStopMsg: send stop message (myname is >sapr3s_T01_00 <)
NiIMyHostName: hostname = 'sapr3s'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Feb 08 09:03:50 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11957]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 452 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 452 (pos=2)
SiSelNRemove: removed sock 452
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 452
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4204) [dpxxdisp.c 10317]
Good Bye .....
DEV_W0 file:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Feb 08 09:02:42 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.81)
B New connection 0 created
M sysno 00
M sid T01
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 83
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 4732
M
M kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4732) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11648 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDA0050, size: 5320400)
M DpShMCreate: allocated sys_adm at 000000000DDA0050
M DpShMCreate: allocated wp_adm at 000000000DDA1AB0
M DpShMCreate: allocated tm_adm_list at 000000000DDA4830
M DpShMCreate: allocated tm_adm at 000000000DDA4890
M DpShMCreate: allocated wp_ca_adm at 000000000E217030
M DpShMCreate: allocated appc_ca_adm at 000000000E21B680
M DpShMCreate: allocated comm_adm at 000000000E21CDF0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000E2A3A70
M DpShMCreate: allocated gw_adm at 000000000E2A3AF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000E2A3B20
M DpShMCreate: allocated wall_adm at 000000000E2A3B30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 08 09:02:43 2007
M ThInit: running on host sapr3s
M
M Thu Feb 08 09:02:44 2007
M calling db_connect ...
C Thread ID:2008
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 81
C patchcomment Connection check on (0,0) (988711)
C np:(local) connection used on SAPR3S
C CopyLocalParameters: dbuser is 't01'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10205]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapr3s_T01_00 on host sapr3s (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Feb 08 09:02:44 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10404
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4732) [dpnttool.c 327]
Please let me know what to do!
Best Regards,
ThomasHi!
Check that all enviroment variables are complete and still in place?
JAVA_HOME and DBMS_TYPE and so on
Also check that all exe files are of the same version, if not, make sure they are.
You could also try to update disp+work
rollo -
My iPhone 5 dies at 20-24% it doesn't go all the way to 0%. Will apple replace my phone or fix my phone for free since its hardware problem and I have no money. This is my second iphone 5 replacement. I have no apple care so I'm worried. My phone has NEVER touched water! I only get 1/5 of battery use. I've also spent 30$ at the apple store on screen protectors for nothing! I really don't have 220$ nor 50$ I am on a strict budget. I believe I have to pay 220 not 50 ford a phone replacement for accidental damage. I don't know what category this falls under. I really need a new phone or battery. HELP! Will I have to pay? Also my screen lighting is all topsy-tervy every I put my screen on highest it won't work I have to wait about a minute? Forgot to mention that my apps exit out by themselves all the time when Im using them.
So, have you tried a reset? Restore from backup? Restore as new? You seem to have a few problems but do not mention any action taken to resolve them. What have screen protectors to do with anything?
-
The application dies when I try to play a sound
Hello, I'm trying to add sounds in my app. The application dies when I try to play a sound y somes devices.
Logcat throw this error in Motorola Defy:
6:40.960 20812 20812 D dalvikvm: GC_FOR_MALLOC freed 7757 objects / 547472 bytes in 43ms
6:42.030 20812 20812 D dalvikvm: GC_FOR_MALLOC freed 8073 objects / 585952 bytes in 45ms
6:43.897 20812 20812 D dalvikvm: GC_FOR_MALLOC freed 15223 objects / 823384 bytes in 72ms
6:45.569 20812 20812 D dalvikvm: GC_FOR_MALLOC freed 8779 objects / 523280 bytes in 43ms
6:46.460 20168 20168 D dalvikvm: GC_EXPLICIT freed 338 objects / 19208 bytes in 93ms
6:48.374 20812 20812 D dalvikvm: GC_FOR_MALLOC freed 14334 objects / 677680 bytes in 49ms
6:51.155 20812 20812 D dalvikvm: GC_FOR_MALLOC freed 11695 objects / 523056 bytes in 51ms
6:51.444 19957 19957 D dalvikvm: GC_EXPLICIT freed 337 objects / 22952 bytes in 76ms
6:53.952 20812 20812 D dalvikvm: GC_FOR_MALLOC freed 11740 objects / 525648 bytes in 50ms
6:56.460 20150 20150 D dalvikvm: GC_EXPLICIT freed 119 objects / 9336 bytes in 94ms
6:56.741 20812 20812 D dalvikvm: GC_FOR_MALLOC freed 11734 objects / 524704 bytes in 49ms
6:57.725 17192 17198 D AudioHardwareMot: Output bufSize from kernel = 8192
6:57.772 17192 17198 D AudioHardwareMot: doRouting devs: stereo 0x2, mono 0, input 0. Chose speaker Speakerphone (gain 0xb) mic None (gain 0x1c1c)
6:57.772 17192 17198 D AudioHardwareMot: Output 0x12480 exiting standby
6:57.780 20832 20832 I DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
6:57.780 20832 20832 I DEBUG : Build fingerprint: 'MOTO/PERAR/umts_jordan/jordan:2.2.1/3.4.2-107_JDNL-7_R02/1299869924:user/release-keys'
6:57.780 20832 20832 I DEBUG : pid: 20812, tid: 20830 >>> air.com.vostu.mobile.bingoscratch <<<
6:57.780 20832 20832 I DEBUG : signal 11 (SIGSEGV), fault addr 00000000
6:57.780 20832 20832 I DEBUG : r0 00000000 r1 00000000 r2 afd43924 r3 00000001
6:57.780 20832 20832 I DEBUG : r4 81f53768 r5 81f803ac r6 00000000 r7 00000017
6:57.780 20832 20832 I DEBUG : r8 81f53768 r9 00002c58 10 0030de48 fp 00007c08
6:57.780 20832 20832 I DEBUG : ip 00000071 sp 4c9f0cc0 lr afd102d0 pc 81134c6e cpsr 60000070
6:57.780 20832 20832 I DEBUG : d0 643a64696f72646e d1 6472656767756265
6:57.780 20832 20832 I DEBUG : d2 61747362696c206b d3 7468676972666567
6:57.780 20832 20832 I DEBUG : d4 7263736f676e6962 d5 62696c2f68637461
6:57.780 20832 20832 I DEBUG : d6 6761747362696c2f d7 5f74686769726665
6:57.780 20832 20832 I DEBUG : d8 0000000000000000 d9 3ff0000000000000
6:57.780 20832 20832 I DEBUG : d10 0000000000000000 d11 0000000000000000
6:57.780 20832 20832 I DEBUG : d12 0000000000000000 d13 0000000000000000
6:57.780 20832 20832 I DEBUG : d14 0000000000000000 d15 0000000000000000
6:57.780 20832 20832 I DEBUG : d16 475f63104592c5d0 d17 3f80000000000000
6:57.780 20832 20832 I DEBUG : d18 3fec506ac5c91cd4 d19 3fbd7ca9d1b71960
6:57.780 20832 20832 I DEBUG : d20 3c90000000000000 d21 3f8381f50a7f58b7
6:57.780 20832 20832 I DEBUG : d22 3e21e8dd9088e048 d23 bda8fae9be8838d4
6:57.780 20832 20832 I DEBUG : d24 fcfcfcfcfcfcfcfc d25 fcfcfcfcfcfcfcfc
6:57.780 20832 20832 I DEBUG : d26 f8f8f8f8f8f8f8f8 d27 f8f8f8f8f8f8f8f8
6:57.780 20832 20832 I DEBUG : d28 0201030102010301 d29 3ff0000000000000
6:57.780 20832 20832 I DEBUG : d30 0000000000000000 d31 3ff0000000000000
6:57.780 20832 20832 I DEBUG : scr 68000013
6:57.780 20832 20832 I DEBUG :
6:57.835 20832 20832 I DEBUG : #00 pc 00134c6e /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.835 20832 20832 I DEBUG : #01 lr afd102d0 /system/lib/libc.so
6:57.835 20832 20832 I DEBUG :
6:57.835 20832 20832 I DEBUG : code around pc:
6:57.835 20832 20832 I DEBUG : 81134c4c 44784811 e7fa6800 c040f8df 200cf854
6:57.835 20832 20832 I DEBUG : 81134c5c b1684790 e038f8df 70292101 300ef854
6:57.835 20832 20832 I DEBUG : 81134c6c 68024798 47886b51 447b4b0a e7e66018
6:57.835 20832 20832 I DEBUG : 81134c7c 44784809 e7e26800 00e1eb32 0000ac0c
6:57.835 20832 20832 I DEBUG : 81134c8c 00e4b76a 00e4b766 00e4b75e 00000d80
6:57.835 20832 20832 I DEBUG :
6:57.835 20832 20832 I DEBUG : code around lr:
6:57.835 20832 20832 I DEBUG : afd102b0 02800016 08bd87f0 e5964000 e5968000
6:57.835 20832 20832 I DEBUG : afd102c0 e2144903 1a000010 e5965000 ebfffa12
6:57.835 20832 20832 I DEBUG : afd102d0 e2055a02 e3853001 e1500003 0a000008
6:57.835 20832 20832 I DEBUG : afd102e0 e3550000 e5865000 13a01001 03a01081
6:57.842 20832 20832 I DEBUG : afd102f0 e1a00006 e3a02001 ebfffa2b e1a00004
6:57.842 20832 20832 I DEBUG :
6:57.842 20832 20832 I DEBUG : stack:
6:57.842 20832 20832 I DEBUG : 4c9f0c80 81f53768 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0c84 81690f41 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0c88 81f53768 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0c8c 8170ae01 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0c90 81f53768 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0c94 8112ed5b /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0c98 81f53768 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0c9c 81f90718
6:57.842 20832 20832 I DEBUG : 4c9f0ca0 00000008
6:57.842 20832 20832 I DEBUG : 4c9f0ca4 811aeb51 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0ca8 81f53768 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0cac 81f803ac /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0cb0 00000000
6:57.842 20832 20832 I DEBUG : 4c9f0cb4 00000017
6:57.842 20832 20832 I DEBUG : 4c9f0cb8 df002777
6:57.842 20832 20832 I DEBUG : 4c9f0cbc e3a070ad
6:57.842 20832 20832 I DEBUG : #00 4c9f0cc0 00001000
6:57.842 20832 20832 I DEBUG : 4c9f0cc4 00003000
6:57.842 20832 20832 I DEBUG : 4c9f0cc8 00000000
6:57.842 20832 20832 I DEBUG : 4c9f0ccc 811b40dd /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0cd0 00000000
6:57.842 20832 20832 I DEBUG : 4c9f0cd4 81f53768 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.842 20832 20832 I DEBUG : 4c9f0cd8 0030de48 [heap]
6:57.850 20832 20832 I DEBUG : 4c9f0cdc 00306560 [heap]
6:57.850 20832 20832 I DEBUG : 4c9f0ce0 81c26b78 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.850 20832 20832 I DEBUG : 4c9f0ce4 81c26bc4 /data/data/air.com.vostu.mobile.bingoscratch/lib/libCore.so
6:57.850 20832 20832 I DEBUG : 4c9f0ce8 0030fc18 [heap]
6:57.850 20832 20832 I DEBUG : 4c9f0cec 00008aec /system/bin/app_process
6:57.850 20832 20832 I DEBUG : 4c9f0cf0 0000733c
6:57.850 20832 20832 I DEBUG : 4c9f0cf4 00000ee4
6:57.850 20832 20832 I DEBUG : 4c9f0cf8 4278f500 /system/framework/core.odex
6:57.850 20832 20832 I DEBUG : 4c9f0cfc 00000000
6:57.850 20832 20832 I DEBUG : 4c9f0d00 00000000
6:57.850 20832 20832 I DEBUG : 4c9f0d04 00000000
6:57.983 20812 20812 D dalvikvm: GC_FOR_MALLOC freed 6786 objects / 377488 bytes in 88ms
6:58.624 17200 17216 I BootReceiver: Copying /data/tombstones/tombstone_03 to DropBox (SYSTEM_TOMBSTONE)
6:58.671 17200 17335 I ActivityManager: Process air.com.vostu.mobile.bingoscratch (pid 20812) has died.
6:58.678 17200 18921 I WindowManager: WIN DEATH: Window{45d3bd40 SurfaceView paused=false}
6:58.678 17200 17864 I WindowManager: WIN DEATH: Window{45c81208 air.com.vostu.mobile.bingoscratch/air.com.vostu.mobile.bingoscratch.AppEntry paused=false}
6:58.694 17200 17343 I WindowManager: Setting rotation to 0, animFlags=1
6:58.702 17193 17193 D Zygote : Process 20812 terminated by signal (11)
6:58.710 17200 17335 I ActivityManager: Config changed: { scale=1.0 imsi=722/34 loc=es_US touch=3 keys=1/1/2 nav=1/1 orien=1 layout=34 uiMode=17 seq=29}
6:58.788 17200 17335 I UsageStats: Unexpected resume of com.motorola.blur.home while already resumed in air.com.vostu.mobile.bingoscratch
6:58.874 17192 17198 D AudioHardwareMot: AudioStreamOutMot::setParameters() fm_attenuate=0;fm_mute=0
6:58.944 17200 17321 W InputManagerService: Got RemoteException sending setActive(false) notification to pid 20812 uid 10103
7:00.366 17200 17208 D KeyguardUpdateMonitor: received broadcast android.intent.action.TIME_TICK
7:00.366 17200 17225 D KeyguardUpdateMonitor: handleTimeUpdate
7:00.750 17192 17198 D AudioHardwareMot: AudioStreamOutMot::standby called
7:00.750 17192 17198 D AudioHardwareMot: Output 0x12480 entering standby
7:00.757 17192 17198 D AudioHardwareMot: Closing Output device
7:00.999 17200 17223 D dalvikvm: GC_EXPLICIT freed 2978 objects / 897552 bytes in 142ms
7:05.507 20160 20160 D dalvikvm: GC_EXPLICIT freed 190 objects / 7304 bytes in 65ms
7:10.522 20182 20182 D dalvikvm: GC_EXPLICIT freed 637 objects / 32064 bytes in 75ms
7:13.993 17200 17208 V DeviceStorageMonitorService: freeMemory=916844544
7:13.993 17200 17208 V DeviceStorageMonitorService: Threshold Percentage=10
7:13.993 17200 17208 V DeviceStorageMonitorService: mTotalMemory = 13303439
7:13.993 17200 17208 I DeviceStorageMonitorService: Posting Message again
7:15.514 19544 19544 D dalvikvm: GC_EXPLICIT freed 358 objects / 17496 bytes in 72ms
Someone knows how can i fix??What is your operating system? If Windows, see http://forums.adobe.com/thread/945765
-
Class action lawsuit regarding Android 2.2
If there were a class action lawsuit filed against Verizon regarding the lack of support for upgrades of the Android OS, would you join it? Essentially it would be based on promises and claims made by sales reps at the stores during the decision process of buying the phone and by phone reps that the Samsung Fascinate was to receive the Android 2.2 update "any day now".
As it stands, people who purchased the Fascinate are paying full price for the data package just the same as other Verizon customers who purchased phones from competing manufacturers (Motorola and HTC). However, people who purchased the Fascinate are not getting the same access or experience as the customers who purchased phones from these other manufacturers.
If I purchased a less technically capable phone than the HTC Incredible or Motorola Droid X, I would not expect the same software updates. However, I was told that the three phones (Incredible, Fascnate and X) were all in the same class and all ran on the same version of Android (2.1 at the time of purchase). Being a Black Berry Storm user before and having been limited on my browser experience, I had been following the progress of Android and I had heard that Android was to receive an update that would allow for Flash capabilities which was a huge deal. It was one of the main reasons I switched from Black Berry to Android. I was told that all three phones would be receiving the 2.2 update "very soon". This was in October of 2010.
Due to the Adobe Flash capabilities provided by the Android 2.2 update, Fascinate users are being limited on their browser usage but are not being compensated in ANY way for this lack of access. Also, other Samsung products contracted through Verizon are already come with the Android 2.2 software installed.
Personally (and I don't think I'm alone), I feel cheated by both Verizon and Samsung for not providing what was promised, all the while, people who purchased the Motorola or HTC handsets, have received their updates as promised and are receiving more browser access but paying the same amount that I am. Upon calling Samsung, the rep did not hesitate to blame Verizon for the lack of support.
So the question again is... If there were a class action lawsuit filed against Verizon, would you join it? There may never be one, and many attorneys may say it would be a waste of time, but would you join? I know I would.@mdram4x4
I am totally disagreeing with you. When you're purchasing a car, dealership is clearly asking telling you that car is sold AS-IS and you even being asked to sign a letter of release form that states that car is being purchased with whatever option currently existing on the car and unless specifically specified no additional accessories or parts are coming with it. BUT and notice it is a capital letter but...it also say NO PROMISES, VERBAL, WRITTEN, OR OTHEWISE BEING MADE TO OFFER IN CONJUNCTION WITH THIS SALE.
And that it what you are signing.
In Verizon case, verbal promises of Froyo availability were made by Verizon sales, tech, and sups left and right. It is time to make those companies to be accounted for their actions.
About 3 weeks or so I spoke with one law firm in San Francisco in regards to that matter and they were willing to open the class action case against Verizon. I was quite busy in the past and hadn't have a chance to speak with them again. I will try to make up some times next week to come see them again and proceed with a case. -
Disp+work process starts than dies in SAP R/3 4.7 Ent. server
I stopped SAP R/3 4.7 ent server for backup, when i restart the Microsoft management console the disp+work process turns yellow to grey.
Can any one help me to solve this problem???
O/s :Windows2000 server
database :SAPDB 7.3
Here iam attaching the log files......
sapstart,dev_rfc,dev_w0,dev_disp,stderr2,stderr3 and stderr4
sapstart.trc:
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:35:56
SAP-R/3-Startup Program
Starting at 2006/05/13 14:35:56
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3352) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3188) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3856) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 14:44:15
(1264) Parent Shutdown at 2006/05/13 14:44:15
(1264) kill(3856) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:44:48
SAP-R/3-Startup Program
Starting at 2006/05/13 14:44:48
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3876) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3844) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 16:24:21
(1264) Parent Shutdown at 2006/05/13 16:24:21
(1264) kill(3844) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 17:53:25
SAP-R/3-Startup Program
Starting at 2006/05/13 17:53:25
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(2872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(948) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3468) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:36:33
(1264) Parent Shutdown at 2006/05/14 14:36:33
(1264) kill(3468) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/14 14:41:50
SAP-R/3-Startup Program
Starting at 2006/05/14 14:41:50
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3220) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3236) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3244) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:47:09
(1264) Parent Shutdown at 2006/05/14 14:47:09
(1264) kill(3244) failed.
2.dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun May 14 14:42:14 2006
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3296
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3296) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 20304 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00100040, size: 1985344)
M DpShMCreate: allocated sys_adm at 00100040
M DpShMCreate: allocated wp_adm at 00100560
M DpShMCreate: allocated tm_adm_list at 001054B0
M DpShMCreate: allocated tm_adm at 001054D8
M DpShMCreate: allocated wp_ca_adm at 002A2198
M DpShMCreate: allocated appc_ca_adm at 002A67E8
M DpShMCreate: allocated comm_adm_list at 002A7F58
M DpShMCreate: allocated comm_adm at 002A7F70
M DpShMCreate: allocated ca_info at 002D6D70
M DpShMCreate: allocated wall_adm at 002D6D78
X
X Sun May 14 14:42:16 2006
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun May 14 14:42:16 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3296) [dpnttool.c 346]
3. dev_rfc.trc
ERROR file opened at 20060419 104033 India Standard , SAP-REL 620,0,1574 RFC-VER 3 673347 MT-SL
T:73832 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1422
T:73832 <* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:34 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:35 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:53:15 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:55:12 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:58:17 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:01:11 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:21 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:22 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:05:32 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcSendData [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcDispatch [1] : returns 18:RFC_INVALID_HANDLE
ERROR file opened at 20060421 202203 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:4468 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:4468 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060428 194717 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
>TS> Fri Apr 28 19:47:18 2006
T:73164 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:73164 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060512 214308 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:5504 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:5504 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4.dev_disp.trc
trc file: "dev_disp", trc level: 1, release: "620"
Sun May 14 14:42:07 2006
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3244
***LOG Q00=> DpSapEnvInit, DPStart (01 3244) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 14 14:42:11 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 20304 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001C0040, size: 1985344)
DpShMCreate: allocated sys_adm at 001C0040
DpShMCreate: allocated wp_adm at 001C0560
DpShMCreate: allocated tm_adm_list at 001C54B0
DpShMCreate: allocated tm_adm at 001C54D8
DpShMCreate: allocated wp_ca_adm at 00362198
DpShMCreate: allocated appc_ca_adm at 003667E8
DpShMCreate: allocated comm_adm_list at 00367F58
DpShMCreate: allocated comm_adm at 00367F70
DpShMCreate: allocated ca_info at 00396D70
DpShMCreate: allocated wall_adm at 00396D78
Sun May 14 14:42:12 2006
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( SAPSRV) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sun May 14 14:42:13 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 14 14:42:52 2006
ERROR => W0 (pid 3296) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 3304) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 3312) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 3320) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 3328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 3336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 3344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 3784) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 3820) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 3584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 3668) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 3632) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 3652) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 3616) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 3648) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 3628) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
ERROR => W16 (pid 3656) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
ERROR => W17 (pid 4024) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W17
ERROR => W18 (pid 3928) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W18
ERROR => W19 (pid 3880) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W19
ERROR => W20 (pid 3432) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W20
ERROR => W21 (pid 3124) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W21
ERROR => W22 (pid 3800) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W22
ERROR => W23 (pid 3804) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W23
ERROR => W24 (pid 3812) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W24
ERROR => W25 (pid 3832) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W25
ERROR => W26 (pid 3480) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W26
my types changed after wp death/restart 0xbd --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 14 14:42:57 2006
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3244) [dpxxdisp.c 7883]
5.stderr2
D:\usr\sap\ER2\DVEBMGS01\work>set DBNAME=ERc
D:\usr\sap\ER2\DVEBMGS01\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" dbm_version VERSION 1>dbversion.out
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "OK" dbversion.out 1>dbmcli.err
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 goto err_dbm
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "7.4" dbversion.out 1>adatmp
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 (set dbmcli_cmd="db_warm" ) else (set dbmcli_cmd="db_online" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" "db_warm"
OK
Database ER2 successfully started !
6. stderr3
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
7.stderr4
maximum pfclock time: 4294sec (1)
work process W0 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W2 died => tskh_init: db_connect
IcmBndMain: handle for "localhost:8001" successfully sent to server
maximum pfclock time: 4294sec (1)
work process W23 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1155
adjust_clock: delta 1106
work process W26 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W10 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
work process W20 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9312
adjust_clock: delta 1040
work process W7 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W18 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W12 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W1 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W14 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 760
work process W11 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1129
work process W25 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 3589
adjust_clock: delta 631
work process W24 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
adjust_clock: delta 652
adjust_clock: delta 514
work process W8 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W22 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1192
work process W21 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W3 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W16 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1617
adjust_clock: delta 1609
work process W5 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9714
work process W17 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2063
work process W19 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 746
work process W6 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2040
work process W4 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W15 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1089
work process W13 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W9 died => tskh_init: db_connect
ICM up and operational (pid: 3272) ***
Shutdown ICM server ....maximum pfclock time: 4294sec (1)
ICM shutdown completed (pid: 3272) ***
DISPATCHER EMERGENCY SHUTDOWN => DpEnvCheck: no more work processes
maximum pfclock time: 4294sec (1)Hi Bapujee,
I upgraded kernel 6.20 (Patch level 1602)as per the details you mentioned. when i restarted the server the message server starts perfectly,but disp+work process turns to yellow than dies(during that time WP Table is blank).
Also attaching dev_w0 file.
thanks & regards,
sreepathi
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue May 16 23:38:55 2006
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' ...
B Library 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' loaded
B Version of 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' is "620.02", patchlevel (0.1599)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 1602
M intno 20020600
M make: multithreaded, ASCII
M pid 3180
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3180) [dpxxdisp.c 1088]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12920 (760)
M DpShMCreate: sizeof(tm_adm) 1835536 (9132)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D10040, size: 2122960)
M DpShMCreate: allocated sys_adm at 05D10040
M DpShMCreate: allocated wp_adm at 05D10678
M DpShMCreate: allocated tm_adm_list at 05D138F0
M DpShMCreate: allocated tm_adm at 05D13918
M DpShMCreate: allocated wp_ca_adm at 05ED3B28
M DpShMCreate: allocated appc_ca_adm at 05ED8178
M DpShMCreate: allocated comm_adm_list at 05ED98E8
M DpShMCreate: allocated comm_adm at 05ED9900
M DpShMCreate: allocated ca_info at 05F08700
M DpShMCreate: allocated wall_adm at 05F08708
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Tue May 16 23:38:57 2006
M calling db_connect ...
C
C DBADASLIB : version 620.02
C SAPDB shared library (dbadaslib) patchlevels (last 10)
C (0.1599) Set isolation level calls optimized (note 762712)
C (0.1491) ThGetWpId corrected (note 624930)
C (0.1412) Support of SAPDB database hints (note 652096)
C (0.1411) LobGetpiece returns a failure if no data available (note 720343)
C (0.1355) SAPDB supports DBSL_CMD_INI_KRN_CALLBACK (note 624930)
C (0.1352) CHECKPOINT NOWAIT removed (note 708201)
C (0.1278) UPDSTAT without tracefile (note 696689)
C (0.1267) Explain problem with RAW values and IN-clause fixed (note 692188)
C (0.1189) Explain for database version 7.5 changed (note 680586)
C (0.1115) Object consistency (note 650475)
C
C
C INFO : SQLOPT= -I 0 -t 0 -F SAPDB.3180.pct
C Precompiler Runtime : C-PreComp 7.3.1 Build 007-000-087-566
C Precompiler runtime is SAP DB 7.3.1.007
C *** ERROR => Using non supported SAP DB precompiler runtime version: 7.3.1.007
[dbslada.c 5093]
C *** ERROR => Min. version for this release must be 7.3.1.010
[dbslada.c 5095]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1200]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8812]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M rq_info = 0
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue May 16 23:38:57 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8957
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 233]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3180) [dpnttool.c 356]
Message was edited by: Sreepathi -
Dispatcher dies after startup - sapdb / libpcr
We have a NW04 server on Windows whose primary purpose is as an XI hub.
It was recently moved from one network to another (same machine name) and initially worked properly, but is now not starting up.
I just had to extend the data volume, as it was full, if thats of any relevance.
It seems to be having issue loading "libpcr". I did some searches, and re-registered the library, as well as setting the SABDBLIBDIR env variable. To no avail.
Here's the trace of dev_w3, which seems to be the first process that dies:
trc file: "dev_w3", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Oct 30 14:22:49 2006
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\FXI\SYS\exe\run\dbadaslib.dll' ...
B
B Mon Oct 30 14:22:50 2006
B Library 'C:\usr\sap\FXI\SYS\exe\run\dbadaslib.dll' loaded
B Version of 'C:\usr\sap\FXI\SYS\exe\run\dbadaslib.dll' is "640.00", patchlevel (0.120)
B New connection 0 created
M sysno 00
M sid FXI
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 129
M intno 20020600
M make: multithreaded, Unicode
M pid 3892
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 3 3892) [dpxxdisp.c 1158]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 15792 (1316)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D60040, size: 3386944)
M DpShMCreate: allocated sys_adm at 05D60040
M DpShMCreate: allocated wp_adm at 05D61B88
M DpShMCreate: allocated tm_adm_list at 05D65938
M DpShMCreate: allocated tm_adm at 05D65960
M DpShMCreate: allocated wp_ca_adm at 0603A7B8
M DpShMCreate: allocated appc_ca_adm at 06040578
M DpShMCreate: allocated comm_adm_list at 060424B8
M DpShMCreate: allocated comm_adm at 060424D0
M DpShMCreate: allocated vmc_adm_list at 060891A0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060891C8
M DpShMCreate: allocated wall_adm at 060891D0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 3 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Oct 30 14:22:51 2006
M calling db_connect ...
C
C DBADASLIB : version 640.00, patch 0.120 (Make PL 0.129)
C SAPDB shared library (dbadaslib) patchlevels (last 10)
C (0.120) SAPDB precompiler 7.4.3 b42 (note 850826)
C (0.120) DB50 perm block defect (note 934194)
C (0.119) Explain aborts with signal 11 (note 932516)
C (0.093) Disable LVC codepage checking (note 882788)
C (0.093) SAPDB_FIX_STRG_LENGTH, only active DDIC tables (note 857506)
C (0.089) Use SAPLOCALHOST for local hostname (UPDSTAT) (note 870327)
C (0.086) UPDSTAT optimized (note 870327)
C (0.080) Internal procedure SAPDB_FIX_STRG_LENGTH (note 857506)
C (0.077) DbSlLobLength corrected (note 850827)
C (0.075) Support of SDBUPDEXCL (note 847616)
C
C
C INFO : SQLOPT= -I 0 -t 0 -F SAPDB.3892.pct
C
C Mon Oct 30 14:22:53 2006
C *** ERROR => Get of the precompiler version failed : sqlcode=-888 (Could not load libpcr (C:\sapdb\programs\runtime\7403\pgm\libpcr-The))
[dbadautl.c 796]
B ***LOG BY2=> sql error -888 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> Could not load libpcr (C:\sapdb\programs\runtime\7403\pgm\libpcr-The) [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error -888 performing CON [dblink#2 @ 419] [dblink 0419 ]
B ***LOG BY0=> Could not load libpcr (C:\sapdb\programs\runtime\7403\pgm\libpcr-The) [dblink#2 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1284]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9559]
M
M Info for wp 3
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server fc-sap_FXI_00 on host fc-sap (wp 3)
M * ERROR tskh_init: db_connect
M *
M * TIME Mon Oct 30 14:22:53 2006
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9735
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 3 3892) [dpnttool.c 357]dbm_version:
OK
VERSION = 7.6.00
BUILD = DBMServer 7.6.00 Build 029-123-128-338
OS = WIN32
INSTROOT = c:\sapdb\fxi\db
LOGON = True
CODE = ASCII
SWAP = full
UNICODE = (unknown)
INSTANCE = (unknown)
SYSNAME = Windows Server 2003 family
sdbregview -l:
SAP Utilities c:/sapdb/programs 7.6.00.29 32 bit valid
DB Analyzer c:/sapdb/programs 7.6.00.29 32 bit valid
Server Utilities c:/sapdb/programs 7.6.00.29 32 bit valid
PCR 7300 c:/sapdb/programs 7.3.00.55 valid
Redist Python c:/sapdb/programs 7.6.00.29 32 bit valid
Base c:/sapdb/programs 7.6.00.29 32 bit valid
PCR 7301 c:/sapdb/programs 7.3.01.20 valid
JDBC c:/sapdb/programs 7.6.00.24 valid
Messages c:/sapdb/programs MSG 0.3347 valid
PCR 7500 c:/sapdb/programs 7.5.00.33 32 bit valid
ODBC c:/sapdb/programs 7.6.00.29 32 bit valid
Database Kernel c:/sapdb/fxi/db 7.6.00.29 32 bit valid
Loader c:/sapdb/programs 7.6.00.29 32 bit valid
PCR 7104 c:/sapdb/programs 7.1.04.45 valid
SQLDBC c:/sapdb/programs 7.6.00.29 32 bit valid
SQLDBC 7600 c:/sapdb/programs 7.6.00.29 32 bit valid
PCR 7403 c:/sapdb/programs 7.4.03.41 32 bit valid
sdbverify:
SAP Utilities 7.6.00.29 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
DB Analyzer 7.6.00.29 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
Server Utilities 7.6.00.29 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
PCR 7300 7.3.00.55 in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
Redist Python 7.6.00.29 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
Base 7.6.00.29 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
check rte registration of package... ok
package data is consistent
PCR 7301 7.3.01.20 in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
JDBC 7.6.00.24 in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
Messages MSG 0.3347 in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
PCR 7500 7.5.00.33 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
check rte registration of package... ok
package data is consistent
ODBC 7.6.00.29 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
Database Kernel 7.6.00.29 32 bit in c:/sapdb/fxi/db
check files... ok
check dependencies... ok
check rte registration of package... ok
package data is consistent
Loader 7.6.00.29 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
PCR 7104 7.1.04.45 in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
SQLDBC 7.6.00.29 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
SQLDBC 7600 7.6.00.29 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
package data is consistent
PCR 7403 7.4.03.41 32 bit in c:/sapdb/programs
check files... ok
check dependencies... ok
check rte registration of package... ok
package data is consistent
VERIFICATION SUMMARY:
INVALID PACKAGES: 0
VALID PACKAGES: 17
INCONSISTENT PACKAGES: 0
TOTAL FILES: 458
MISSED FILES: 0
MODIFIED FILES: 0
FILES WITH MODIFIED PERMISSIONS: 0 -
Dispatcher dies after afew seconds
The dispatcher on my CI dies after afew seconds. In SAPMMC the SID becomes green then the message server closes the connection to the dispatcher forcing all WP's to die.
The error on the message server:
ERROR => MsSClientHandle: no server provides service ENQ
I have here the seveloper traces for the message server and the dispatcher just in case.
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 1736] Tue Mar 28 14:09:10 2006
[Thr 1736] MsSSetTrcLog: trc logging not active
[Thr 1736] relno 6200
[Thr 1736] patchlevel 0
[Thr 1736] patchno 1529
[Thr 1736] intno 20020600
[Thr 1736] pid 524
[Thr 1736] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 524) [msxxserv.c 1533]
[Thr 1736] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 1736] *** I listen to port sapmsRD1 (3610) ***
[Thr 1736] *** HTTP port 8110 state LISTEN ***
[Thr 1736] CUSTOMER KEY: >S1988002762<
[Thr 1736] Tue Mar 28 14:10:41 2006
[Thr 1736] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from <HOST_SID_nr [msxxserv.c 4078]
[Thr 1736] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 1094]
[Thr 1736] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 8618]
[Thr 1736] *** ERROR => MsSClientHandle: MsSRead C1 (belrd110_RD1_10), MSEINTERN [msxxserv.c 3675]
====================================================
Dispatcher:
trc file: "dev_disp", trc level: 1, release: "620"
Tue Mar 28 14:09:11 2006
kernel runs with dp version 13(ext=2) (@(#) DPLIB-INT-VERSION-13)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 1640
intno 20020600
make: multithreaded, ASCII
pid 3512
***LOG Q00=> DpSapEnvInit, DPStart (10 3512) [dpxxdisp.c 1022]
shared lib "dw_xml.dll" version 1640 successfully loaded
shared lib "dw_xtc.dll" version 1640 successfully loaded
shared lib "dw_stl.dll" version 1640 successfully loaded
Tue Mar 28 14:09:23 2006
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0201.qqq.nxst) took 12 seconds
Tue Mar 28 14:09:41 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3452]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 9880 (760)
DpShMCreate: sizeof(tm_adm) 1835536 (9132)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 03A30040, size: 2119920)
DpShMCreate: allocated sys_adm at 03A30040
DpShMCreate: allocated wp_adm at 03A30678
DpShMCreate: allocated tm_adm_list at 03A32D10
DpShMCreate: allocated tm_adm at 03A32D38
DpShMCreate: allocated wp_ca_adm at 03BF2F48
DpShMCreate: allocated appc_ca_adm at 03BF7598
DpShMCreate: allocated comm_adm_list at 03BF8D08
DpShMCreate: allocated comm_adm at 03BF8D20
DpShMCreate: allocated ca_info at 03C27B20
DpShMCreate: allocated wall_adm at 03C27B28
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2048 MB
<ES> 2047 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( belrd110) [dpxxdisp.c 9447]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 1640
Release check o.K.
Tue Mar 28 14:10:21 2006
ERROR => W0 (pid 2812) died [dpxxdisp.c 11848]
ERROR => W1 (pid 3120) died [dpxxdisp.c 11848]
ERROR => W2 (pid 1532) died [dpxxdisp.c 11848]
ERROR => W3 (pid 2864) died [dpxxdisp.c 11848]
ERROR => W4 (pid 2828) died [dpxxdisp.c 11848]
ERROR => W5 (pid 1312) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1300) died [dpxxdisp.c 11848]
ERROR => W7 (pid 3688) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W8 (pid 4064) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W9 (pid 3464) died [dpxxdisp.c 11848]
ERROR => W10 (pid 1516) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2888) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2092) died [dpxxdisp.c 11848]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2812 (SIGUSR2)
ERROR => DpWpKill(2812, SIGUSR2) failed [dpxxtool.c 2645]
killing W1-3120 (SIGUSR2)
ERROR => DpWpKill(3120, SIGUSR2) failed [dpxxtool.c 2645]
killing W2-1532 (SIGUSR2)
ERROR => DpWpKill(1532, SIGUSR2) failed [dpxxtool.c 2645]
killing W3-2864 (SIGUSR2)
ERROR => DpWpKill(2864, SIGUSR2) failed [dpxxtool.c 2645]
killing W4-2828 (SIGUSR2)
ERROR => DpWpKill(2828, SIGUSR2) failed [dpxxtool.c 2645]
killing W5-1312 (SIGUSR2)
ERROR => DpWpKill(1312, SIGUSR2) failed [dpxxtool.c 2645]
killing W6-1300 (SIGUSR2)
ERROR => DpWpKill(1300, SIGUSR2) failed [dpxxtool.c 2645]
killing W7-3688 (SIGUSR2)
ERROR => DpWpKill(3688, SIGUSR2) failed [dpxxtool.c 2645]
killing W8-4064 (SIGUSR2)
ERROR => DpWpKill(4064, SIGUSR2) failed [dpxxtool.c 2645]
killing W9-3464 (SIGUSR2)
ERROR => DpWpKill(3464, SIGUSR2) failed [dpxxtool.c 2645]
killing W10-1516 (SIGUSR2)
ERROR => DpWpKill(1516, SIGUSR2) failed [dpxxtool.c 2645]
killing W11-2888 (SIGUSR2)
ERROR => DpWpKill(2888, SIGUSR2) failed [dpxxtool.c 2645]
killing W12-2092 (SIGUSR2)
ERROR => DpWpKill(2092, SIGUSR2) failed [dpxxtool.c 2645]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
Tue Mar 28 14:10:31 2006
NiISelect: TIMEOUT occured(10000 msecs)
dump system status
Workprocess Table (long) Tue Mar 28 18:10:31 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2812 Ended no 1 0 0
1 DIA 3120 Ended no 1 0 0
2 DIA 1532 Ended no 1 0 0
3 DIA 2864 Ended no 1 0 0
4 DIA 2828 Ended no 1 0 0
5 DIA 1312 Ended no 1 0 0
6 UPD 1300 Ended no 1 0 0
7 UPD 3688 Ended no 1 0 0
8 ENQ 4064 Ended no 1 0 0
9 BTC 3464 Ended no 1 0 0
10 BTC 1516 Ended no 1 0 0
11 SPO 2888 Ended no 1 0 0
12 UP2 2092 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 28 18:10:31 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
4
4
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 10
wake_evt_udp_now 0
wake events total 6, udp 5 ( 83%), shm 1 ( 16%)
since last update total 6, udp 5 ( 83%), shm 1 ( 16%)
Dump of tm_adm structure: Tue Mar 28 18:10:31 2006
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Mar 28 18:10:31 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
Tue Mar 28 14:10:36 2006
NiISelect: TIMEOUT occured(5000 msecs)
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, handle 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
killing process (1096) (SOFT_KILL)
killing process (3368) (SOFT_KILL)
[DpProcDied] Process lives (PID:1096 HANDLE:1556)
wait for end of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Tue Mar 28 14:10:37 2006
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process died (PID:1096 HANDLE:1556)
[DpProcDied] Process lives (PID:3368 HANDLE:1548)
wait for end of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Tue Mar 28 14:10:38 2006
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process lives (PID:3368 HANDLE:1548)
wait for end of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Tue Mar 28 14:10:39 2006
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process lives (PID:3368 HANDLE:1548)
wait for end of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Tue Mar 28 14:10:40 2006
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process lives (PID:3368 HANDLE:1548)
wait for end of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Tue Mar 28 14:10:41 2006
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process died (PID:3368 HANDLE:1548)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60, ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4, ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, handle 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9673]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, handle 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60, ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40, ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40, ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 12)
MBUF component DOWN
NiBufClose: clear extensions for handle 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close nihandle-socket 3-1560
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3512) [dpxxdisp.c 8207]
Good Bye .....I added the sapservice and sidadm accounts in the login properties for the respective databases for some reason those users did not have access rights to the DB.
Strange! windows thing I guess!
Anyhow. I solved it. thanks for your help.
Damien -
DB connect problem,Disp+Work.exe dies and the work processes die on startup
Dear Experts,
I am getting the error on SAP startup,Disp+Work.exe dies and the work processes die on startup.
I found below error in my DEV_W0 trace as below
*failed to establish conn to np:(local).*
*C Retrying without protocol specifier: (local)*
*C Provider SQLNCLI could not be initialized. See note #734034 for more information.*
*C Using provider SQLOLEDB instead.*
*C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']*
*C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.*
*C Procname: [ExecuteAndFlush - no proc]*
But i could see the user 'pec' is availble in my database users list with db_owner , public permissions also been assigned to it.
However When trying to delete a user on SQL server 2000, we recieve the message "You cannot drop the selected login ID because that login ID owns objects in one or more databases.".
Please refer the below work process trace and please suggest the possible solution..
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat Feb 14 15:10:21 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.195)
B New connection 0 created
M sysno 00
M sid PEC
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 196
M intno 20020600
M make: multithreaded, Unicode
M pid 3844
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3844) [dpxxdisp.c 1162]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 21120 (1320)
M DpShMCreate: sizeof(tm_adm) 29558776 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 1160000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (384056/329560/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07800040, size: 31492672)
M DpShMCreate: allocated sys_adm at 07800040
M DpShMCreate: allocated wp_adm at 07801B88
M DpShMCreate: allocated tm_adm_list at 07806E08
M DpShMCreate: allocated tm_adm at 07806E30
M DpShMCreate: allocated wp_ca_adm at 09437628
M DpShMCreate: allocated appc_ca_adm at 0943D3E8
M DpShMCreate: allocated comm_adm_list at 0943F328
M DpShMCreate: allocated comm_adm at 0943F340
M DpShMCreate: allocated vmc_adm_list at 0955A680
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0955A6A8
M DpShMCreate: allocated wall_adm at 0955A6B0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sat Feb 14 15:10:22 2009
M calling db_connect ...
C Thread ID:3868
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 195
C patchcomment DBCON: database names must not start with digits (1078650)
C np:(local) connection used on CAMBSVR15
C CopyLocalParameters: dbuser is 'pec'
C
C Sat Feb 14 15:10:23 2009
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Sat Feb 14 15:10:26 2009
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1280]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9621]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server cambsvr15_PEC_00 on host cambsvr15 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sat Feb 14 15:10:26 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9806
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3844) [dpnttool.c 357]
I would greatly appriciate your quick response, Since it is a production issue.
Many Thanks,
VinodHi Rohit and Subhadip,
My problem was solved, thanks for your effort.
reason is that, user 'pec' not been associated with login user for the SQL server.
subha : when i execute the first command which you suggested, but couldn't find any user's list.
so i didn't tried with the second command. just to give a final try i have executed the script like below and its worked out.
USE PEC
GO
EXEC sp_change_users_login 'update_one','pec','pec'
GO
Now i see that all work process are starting,,,thank you so much rohit and subhadip
I could have try this first ,when you guys suggested since i couldn't find any output with the first command i didn't proceed with second one.
Since deleting and creating method doesn't seems to be a good, i have just to give a try executed the second command and its worked.
Thanks for your time and patience
Many Thanks,
Vinod -
New AIR game - Saturate: A bullet-storm survival shooter
Hi all,
I've been working for over a year on game with a publisher (not this game!), and it is still many months away from release. In the meantime I was anxious to get something released to the public in the short term, so two weeks ago I started Saturate: A bullet-storm survival shooter as a tribute game to one of my fav PC games, Mono by Binary Zoo. Written in AIR 13 for iOS, Android and Facebook (iOS under review, and FB coming in a few days), with IAP for those who don't want to earn credits the hard way . I'll update the links as the other platform versions become available:
Available for Android right now!
Pixelthis website
Pixelthis Facebook page
Saturate is a Geometry Wars style two-stick single-screen bullet-storm survival shooter. There are lots of control schemes to try (and more coming). Keep in mind that this was a 2-week 'get it out there' marathon, so there are still plenty of features in the pipes (like highscore tables, sharing screenshots to FB and setting them as your wallpaper/bg, different game modes).
The aim of the game is to saturate the screen with color. Your score is the % of the screen that you fill when you die (and you will die). The enemies are R, G and B, and they splat the screen with color when they explode. There are some cool power-ups, and tons of weapons to collect. The sound track is pretty awesome too.
Some background: Pixelthis just turned 10 years old a few days ago, so we've been around the block! We started with Flash 4 and then Flash Lite 1.1 (way back when) on Nokia and Sony-Ericsson phones. Saturate is developed using AIR, using our proprietary games platform. The core of the system is a rasteriser that turns vector graphics to bitmap at runtime (including filters) so that we can run in GPU mode with very good performance, and a callback-based event and tweening system for very fast game loop, animations and messaging. Saturate uses Milkmangames ANEs for StoreKit and Android IAB, and GoViral for social integration.
The biggest challenges in development were (1) counting pixels to determine % of screen filled so that it didn't impact negatively on performance, and (2) tracking down and elliminating memory allocations during the game loop. There are still some optimisations to do, but I think it went pretty well! Unfortunately it runs a bit too slow on iPad1 when teh action hots up, so that device has been elliminated. A bug in Adobe AIR that has not been addresed yet also prevents facebook from working on iOS5.1.
Enjoy!
PeterThanks lars. Appreciated.
I can't post actual code of the libraries (because it is our 10yrs worth of IP and it's what allows us to make games that run well accross devcies etc) but i can share the basic principles etc!
This is what some example code looks like for making a 'RasterSprite':
// Import the assets from a swc library that contains graphics.
// These are movieclips with a graphic on each frame
import assets.CharacterAssets;
import assets.UIAssets;
// Initialise the rasteriser just once when the game is started, with a ref to stage
Rasteriser.init( stage );
// Rasterise the graphics (this technique is synchronous/blocking) but
// there is another process that is for larger amounts of graphics.
// First we set the 'scale'. This determines how big to rip the graphics so that they
// are always the correct size for the screen/device they are running on.
Rasteriser.scale = scaleOfGame;
Rasteriser.rip( CharacterAssets );
Rasteriser.rip( UIAssets );
// At this point, each frame is 'ripped' to a bitmapData that is cached in a vector
// When we need to create a RasterSprite, we use the following technique, which
// grabs one from a static object pool within RasterSprite:
var character : RasterSprite = RasterSprite.create( 'CharacterAssets', 12, 15 ); // frames 12 to 15
character.gotoAndStop(3); // This would be frame 14 of the CharacterAssets clip
addChild( character );
var titleGraphic : RasterSprite = RasterSprite.create( 'UIAssets', 7 );
addChild( title );
// When we don't need them anymore:
character.recycle(); // Removes from display list and places back in object pool
character = null;
title.recycle();
title = null;
The Rasteriser is a static class that handles ripping the graphics and caching them.
The RasterSprite is a Sprite that contains a Bitmap. The bitmapData is one from the Rasterisers cache.
The Rasteriser rips any graphics to a bitmapData at any scale, including any transformations, color transforms, filters etc. Everything maintains the correct scale (e.g. if you rip a graphic at scale 5.3, then the filters are also scaled by 5.3). This is the magic that both allows the games to run on any resolution screen, and also allows the game to use GPU mode while effectively maintaining filters.
This is the basic process for ripping the vector-based graphics to bitmapData.
here we assume that the clip (if it is a movieClip) is 'stopped' on the frame you want to rip:
1) Step through each filter and scale it's properties to the desired scale
2) Add the clip to a container sprite (We rip the container. This is what preserves the clips transformation, alpha etc. If we rip the clip directly all that stuff is ignored).
3) Find the 'bounds' of the graphics within the container INCLUDING filters. This is important because if a graphics are 100px wide, the content is not always from x=0 to x=100. It may from x=-26 to x=74.
4) Create a new BitmapData the correct size (of bounds)
5) Create a matrix to offset the content so that it IS at 0,0
6) Use BitmapData.drawWithQuality to draw the container to the BitmapData
7) Create a bitmap with that bitmapData, and offset the bitmap to counter-act step 5 and place graphics back at correct spot
8) Optionally, scale all teh filters back again so that the original clip is not affected
9) Remove the clip from the temporary container
Anything specific you'd like to know? -
IWeb dies everytime..... save/publish...etc
Anytime I perform an action, iWeb dies and produces error log for apple..... this is on save, publish... whatever! Any reason for this?
System:
iMac 2.66 Intel C2D OS X v. 10.8.2
iWeb 08
Log: (sorry for the size)
Process: iWeb [2109]
Path: /Applications/iWeb.app/Contents/MacOS/iWeb
Identifier: com.apple.iWeb
Version: 2.0.4 (200)
Build Info: iWeb-4060000~25
Code Type: X86 (Native)
Parent Process: launchd [178]
User ID: 501
Date/Time: 2012-10-31 16:19:32.370 +0000
OS Version: Mac OS X 10.8.2 (12C60)
Report Version: 10
Interval Since Last Report: 123088 sec
Crashes Since Last Report: 6
Per-App Interval Since Last Report: 597 sec
Per-App Crashes Since Last Report: 5
Anonymous UUID: 31C4CCF1-F9B6-F23D-970D-85400C55001F
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
Performing @selector(saveDocument:) from sender NSMenuItem 0x36c77b0
Dyld Error Message:
Symbol not found: _CGLayerComposite
Referenced from: /Applications/iWeb.app/Contents/MacOS/../Frameworks/SFRendering.framework/SFRen dering
Expected in: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 dyld 0x8fea70b5 dyld_fatal_error + 1
........... etciWeb 2 is known not work well with Mt. Lion as there are components of the system that version 2 isn't compatible with. You should upgrade to iWeb 3 by purchasing the iLife 11 disc from a 3rd party retailer like Amazon.com: iLife 11 and applying the last updater: iWeb 3.0.4
OT -
has anyone seen this on their dot1x configurations where the vlan info is missing on the show running-config? see port fast 2/0/3 below. the 3750 POE switch is running 12.2.55-SE7.
interface FastEthernet2/0/1
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize vlan 34
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enable
interface FastEthernet2/0/2
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize vlan 34
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enable
interface FastEthernet2/0/3
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enable
interface FastEthernet2/0/4
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enable
interface FastEthernet2/0/5
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enable
interface FastEthernet2/0/6
switchport access vlan 18
switchport mode access
switchport nonegotiate
switchport voice vlan 101
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
authentication event fail action authorize vlan 34
authentication event server dead action authorize
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 34
authentication host-mode multi-domain
authentication order dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust dscp
auto qos voip trust
dot1x pae authenticator
dot1x timeout quiet-period 3
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
storm-control broadcast level 1.00
spanning-tree portfast
spanning-tree bpduguard enableThe vlan info isn't missing, you have the option of either specifying which VLAN you want it dropped in to, or you can just say authorize the vlan that is configured with the 'switchport access vlan' command.
-
SFTP related processes do not die if parent process dies.
Java Version: 1.4.2_05
JRE: build 1.4.2_05-b04.
Running on Solaris 9.
Problem:
If the process using the SFTP API dies, the children processes created by the SFTP API do not end.
A side effect of this is that all the sockets the orginal parent had remain open as the child processes inherited them.
The JVM does close STDIN/STDOUT/STDERR to the child if the JVM has less than 1024 filedesriptors open at the time of the Runtime.exec() command.
However, if the JVM has more than 1024 filedesriptors open at the time of the Runtime.exec command the child will
a) inherit all filedescriptors above 1024
b) the STDIN/STDOU/STDERR towards the child is not closed when the JVM exits.
Has anyone seen this before?
I heard this maybe fixed in JDK 1.5. Is this true? Is there a fix on this in 1.4.2?
Your comments are appreciated?I found the following in http://docs.sun.com/app/docs/doc/816-4555/rfsrefer-134?l=ja&a=view :
In this situation, the SIGLOST signal is posted to the process. The default action for the SIGLOST signal is to terminate the process.
For you to recover from this state, you must restart any applications that had files open at the time of the failure. Note that the following can occur.
- Some processes that did not reopen the file could receive I/O errors.
- Other processes that did reopen the file, or performed the open operation after the recovery failure, are able to access the file without any problems.
Thus, some processes can access a particular file while other processes cannot.
Edited by: Arvind_Srinivasan on Dec 10, 2009 12:33 AM
Maybe you are looking for
-
I got the error 4SNS/40000001:VDOR on a 2006 iMac (white), what does it mean?
Dear all, yesterday I notice a whitish stripe (3-4 cm) in the middle of the monitor of the iMac I use at work. The machine is an old white iMac (Intel), 21 inches I think, and was purchased in 2006. Today the stripe was already there, the hardware ex
-
IPhone 6 plus screen replaced by Apple now camera won't work
Anyone else have this problem or have any solutions that doesn't involve giving Apple another $140?
-
Exception in JCo used in EJB (WebService)
Hi, I'm trying to create a webservice of an EJB that has JCo code to call an RFC. The EJB has no syntactical errors. The WebService generation as well as the EAR deployment is successful. When trying to test the WebService from WebServices Navigator,
-
Hi all, I'm trying to activate a method from the html using javascript. The problem start from the fact that the applet isn't activated when running the html. I used the object tag like this: <form name="Form1"> <OBJECT ID="AudioPlay" WIDTH=50 HEIGHT
-
Will Photoshop 6.0 work in OS X Tiger 10.4.6 ?
Evolving Dinosaur here!!!Upgrading my powerPC G4 to OS X Tiger. (System info: 896 mb ram / two 30 gig hd's / 466 Mhz. Epson color 980 / epson perfection 1240u / wacon 4x6 tablet. ) I mainly use Photoshop 6.0 for illustration. I scan my drawings then