Storm 2 9550 Bluetooth and Windows 7

I am having an issue with my new Storm 2 9550. I can get it to pair with my computer and synchronize wirelessly, but I cannot transfer anything such a pictures to my computer via bluetooth. If I look in devices and printers it shows my blackberry, but it has a large yellow exclamation point on it. When I tell it to troubleshoot, it tells me there is no driver installed for "bluetooth peripheral device." There are three instances of this in the device manager. Where can I find drivers for this? I installed the desktop manager and that did not solve the problem. I let it search for drivers and it comes up empty. Can anybody help me with this?

Many (including me) were stumped by the appearance of two bluetooth devices missing drivers in Windows 7 64-bit build 7100 following the installation of Blackberry Desktop Manager Software version 4.6 or higher.
These exclamation ! marked bluetooth peripheral devices are merely two more ports that Windows 7 can't find the drivers for (there should be FOUR total after you follow my suggestions).
Lucky for YOU, these port drivers are already present on your system (assuming you installed RIM Blackberry Desktop Manager software 4.6 or higher).
The 'trick' is to manually load the extra two PORTS by choosing from a list of drivers.
Find the 2 problem drivers-missing entries in your Bluetooth devices list, right click on the first one, choose UPDATE DRIVER SOFTWARE. Then choose Browse My Computer, then Let Me Pick From a List of Device Drivers. Scroll down till you see PORTS, then choose Rim Virtual Serial Port v2 and click Apply.
You'll get a warning message from windows 7, ignore this choose OK or apply and load the driver. It will report the device is set up correctly.
REPEAT this process 1 more time for the 2nd problem child bluetooth device that is missing the driver.
Then pair up your Blackberry with your laptop. Don't forget to REMOVE your laptop or PC from the blackberry list of paired bluetooth devices and then pair it all over again now that you've fixed the drivers on the pc/laptop side of things in Windows 7 by adding those two ports that were missing (assuming you're upgrading to Windows 7 and having problems where you can't sync with Outlook and your Blackberry using BLUETOOTH.
Once you've paired your Blackberry successfully, you'll need to configure Bluetooth in your connections options in Blackberry Desktop Manager 4.6 or higher.
You can then forget about plugging in the USB micro-cable and happily SYNC it with your bluetooth 

Similar Messages

  • HP ENVY Phoenix 810-270st CTO Desktop -Bluetooth and Windows 8.1

    I recently purchased a Phoenix 810 with Integrated Bluetooth 4.0 and Wireless LAN 802.11a/b/g/n/ac featuring Dual-band (2.4 GHz and 5 GHz) 2 x 2 MIMO technology.  when I purchased the system I used the Bluetooth to connect to external bluetooth speakers with windows 8.1.  I could easily see this menu option in my network option in the control panel.  Recently I tried to use the speakers but could not however they show in my system devices.  I also tried to add new and discovered thar Windows is not longer showing anything with Bluetooth in the control panel.
    I have downloaded latest drivers but Windows still does not recognize bluetooth in the control panel anywhere.  Any idea why I could setup and pare bluetooth deviced and now I can't?

    Hi,
    I am running Windows 8.1 with Bluetooth and Bluetooth does not show in the Control Panel.  Look for the Bluetooth icon on the task bar.  See the below image.
    Once you pair up and acknowledge the passcode on both devices this the following screen should appear (example).
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • PC Suite, Bluetooth and Windows 7 - Cannot autheni...

    I had real problems getting PC Suite to connect via bluetooth to my 6300 phone.  I'm using a CSR type dongle which installed via plug and play using the Microsoft drivers.
    I installed PC suite and followed the instruction to "connect a phone".   The phone was discovered and pairing attempted using the default 123 passkey.  I entered the passkey into the phone.  PC suite sat there for about 5 minutes, then came back with "Cannot authenicate phone".  This was tiresomely repeatable!
    After much messing about I finally got the PC suite to authenticate the phone and its all working finel.  Here is what I did in case this helps anyone with the same problem:
    Install PC Suite.
    From the Windows Start Menu In "Devices and Printers" the bluetooth device should be visible - Mine shows "CSR Bluetooth Radio"
    Check the Bluetooth settings of the device "Allow Bluetooth devices to connect to this computer" should checked
    Still in" Devices and Printers", click on "Add Device", if the Bluetooth is working correctly, this should scan bluetooth and discover the phone (make sure the phone is set to visible or discoverable).
    (An alternative method is to open Control Panel, under the "Hardware and Sound, there should be "Add Bluetooth device" option under "Devices and Printers". )
    Select the phone and follow the instructions and pair the PC with phone.  This will involve entering the passkey generated by Windows
    If successful the phone should now appear in the Devices list.  I now see "Nokia 6300" as a device.
    The next steps are the ones I was missing: right click on the phone device and select Properties and then the "Services" tab
    Windows should access the phone device for the services offered by the bluetooth phone.
    Check mark the following services:
    Dial-up Networking [DUN]
    Serial Port (SPP) 'COM1'
    Serial Port (SPP) 'Nokia PC Suite'
    and click ok
    Start up PC Suite and go through the "connect phone" procedure again and it should now connect successfully.
    Hope this works for you
    Chris

    Chris
    I do not have
    Dial up Networking (DUN)
    Serial Port (SPP) Comm1
    Srial Port  (SPP) Nokia PC Suite
    Instead, I have the following listed in the service tab
    Advanced Audio
    Handsfree Te;ephony Gateway
    Object Push (Obex)
    Remote Control
    Remotely controllable Device.
    I am using Windows 7 Professional and my phone is a Nokia 808 V05 20
    I am attachong the screenshot of my installed Nokia PC Suite
    Attachments:
    pc nokia.JPG ‏40 KB

  • IPhone 4 bluetooth and Windows 7

    I am trying to connect my iPhone 4 to my windows 7 laptop.  Windows 7 is saying that it cannot find a device driver for the iPhone and the iPhone says that it is not connected to the laptop.
    Can anyone help?

    this is probably the most common question asked here, which I found the hard way -
    answer: you can't do file transfer or syncing on a PC or Mac with bluetooth, even if you install the device driver (available from broadcom.com). only tethering and audio controls via BT

  • IPhone Bluetooth and Windows 7 Pairing

    I have a 3G iPhone. I could pair it with my Dell Windows XP laptop, using Motorola H350 plugged into one of the USB ports (my laptop did not have Bluetooth capability). I still have that laptop and it still works.
    Now I am also trying to pair my iPhone with a Toshiba laptop (Windows 7 64bit). They recognize each other, I am assigned a pairing code (same number shows both on the laptop Bluetooth screen and iPhone). I click the Pair option on the iPhone and the two devices are paired. However, when trying to connect the two devices, iPhone gives "..... "my computer's name" not supported" error message.
    Any suggestions? Thanks.

    Yes, BluePhoneElite is the software I use to control the handsfree service on OSX: http://mirasoftware.com/BPE2/. If you pair with OSX look under Blue Tooth Preferences and you can see Handsfree Gateway listed under services.

  • Bluetooth and windows 7.

    For the life of me i cant get bluetooth to work after upgrading to windows 7. I downloaded the new drivers for bluetooth from broadcom. I downloaded the update for DM. Desk manager will connect to my phone. But it craps out as soon as I go to sync. it gives an error of "connector specific error"

    Hi and Welcome to the Forums!
    I can't tell quite perfectly, but perhaps this KB has the information you need.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Bluetooth and windows xp

    hello i have windows xp and high speed internet how do i get bluetooth on my pc so i can use my tungsten e2 to conect to my pc via BT what do i need to get blue tooth on my pc thanks?
    Post relates to: Zire 31

    You need to buy a BlueTooth USB "dongle".   It's a tiny device that plugs into a USB port on your computer that has a BlueTooth radio inside of it.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Storm 2 9550 Battery Replacement source

    I Googled Blackberry Storm 2 9550 battery and got a ton of  sources. Reviews showed that those for $5 all had problems with counterfeit batteries that would not charge, failed to hold a charge, etc. So I paid twice the amount: $10 at FactoryOutlet.com for what was supposed to be a brand new battery identical to the original...And got the same result. 
    When the replacement battery is installed, soon a symbol appears with a battery outline and a big red X over it. Factory Outlet says that means it is incompatible. It will not accept a charge no matter how long it is plugged into AC power via a charger that still works fine on the old battery (which is running out of juice much sooner than it used to....same day with little usage).
    Question: has anyone found a reliable on-line source to supply replacments for the original battery D-X1 that is very inexpensive? (I am out of my original 2 yr Verizon contract and will soon be shopping a new phone).
    Or is there a setting within the Blackberry that can be changed to accept manufacturer's batteries that mirror the OME battery specs?

    Hello,
    "Normal" is an elusive measure...each uses their BB differently, demanding a different consumption of resources, including battery power. From my own experience with a 9550, a daily recharge was the maximum length of interval I would reliably recommend. Indeed, I always had a charger in every car, a charger at every normal desk location (e.g., office, home office, etc.) and two fully charged spare batteries. That's just the way it was.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Storm 2 9550 with BMW - Bluetooth stays active all the time

    I changed my phone recently and bought a Storm 2 9550. My old Verizon phone (Motorola Z60) used to work with my car without any problems.
    At first, I didn't have any problems with the new phone while on my car's Bluetooth. However, after activating my phone with the company e-mail functions, the Bluetooth is a nightmare. As soon as it is activated, it stays activated even thought am not talking to anyone and turn the car radio off. I can't change channels on the radio, because the Bluetooth is always active.
    It can't be a problem with the car as it used to work with my other phone. Something happened when I start to get my company e-mails on the phone.
    As soon as I am done with my phone call, I have to disable the Bluetooth otherwise it drains the battery as it stays connected.
    I did unpair and re-pair stuff... Is there a solution to this?
    Zack04

    Delete CleanMyMac2.  You do not need it and may be a contributing reason for your problem.
    Check Activity Monitor for applications that may be using a lot of CPU resources:
    http://support.apple.com/en-us/HT203184
    Run an Apple Hardware Test:
    http://support.apple.com/en-us/HT201257
    Note that an error free AHT is not definitive.
    You also might test the MBP with the original RAM module in place of the 8GB module you installed.  There may be compatibility issues.
    Ciao.

  • Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

    Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

    Hi, Derek -
    ...the screen splits into 4 areas and open windows seperate and shrink.
    Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
    It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

  • IPhone and Windows 7 Bluetooth profiles

    Just picked up the iPhone 4 last week and paired with my Windows 7 HP.  No problems pairing but was surprised that there were only two bluetooth profiles enabled.   I was expecting to also see the profile for OBEX to copy JPEG photos to and from the laptop.  And I was expecting to see the AV profiles so that I can access music on the device from the laptop.   I had both of these features on the Moto I replaced this with.
    Anyone else paired up with Windows and bluetooth and seeing more than just wireless iAP and remote control under the BT profile services available from Windows?   That's all I'm getting which is way less than my buddy with AT&T iPhone gets on his Windows 7 desktop and bluetooth.

    The iphone 4 has limited bluetooth support.  Check out this link for full details.
    http://support.apple.com/kb/ht3647

  • My Bluetooth disappeared from my MacBook. How do I reinstall? That was my question, I recommend intalar MAC OS X 10.5 Leopard, but would have to format the MAC to have bluetooth, but I ended up installing snow leopard and windows 20011. I'll install Windo

    My Bluetooth disappeared from my MacBook. How do I reinstall?
    That was my question, I recommend intalar MAC OS X 10.5 Leopard, but would have to format the MAC to have bluetooth, but I ended up installing snow leopard and windows 20011. I'll install Windows 2011 with the same key? Why does the snow leopard has not fixed the bluetooth?

    Download and install this update combo. This update combo for Snow Leopard can bring any version of Snow Leo up to 10.6.8 with the lastest version of App Store for Snow Leo.
    OS X Snow Leopard 10.6.8 v1.1 update combo
    http://support.apple.com/kb/DL1399

  • Bluetooth Peripheral Device driver failure in Windows Vista and Windows 7 (solved)

    I had problems setting up Bluetooth HotSync.  Following the directions for pairing the device resulted in a "Bluetooth Peripheral Device" missing driver in Device Manager.  I finally figured out how to setup HotSync and am able to sync over Bluetooth to Windows 7 64-bit.
    On the PC
    Right-click on the Bluetooth icon and select Show Bluetooth Devices
    Delete the Palm Phone
    Right-click on the Bluetooth icon again and select Bluetooth settings
    Turn Discovery on for the PC
    On the Palm Device
    Select Bluetooth
    Turn Bluetooth On
    Set Visibility to Hidden (if desired)
    Select Setup Devices on the Bluetooth screen
    Select HotSync Setup
    Click Next
    Select your PC
    This is the important part:  Click Next 3 times (don't do what the screens tell you -- just click Next, Next, Next)
    Click Launch HotSync
    Viola!
    On the PC
    Right-click on the Bluetooth icon again and select Bluetooth settings
    Turn Discovery off for the PC (if desired)
    Post relates to: Centro (AT&T)

    I am having the same problem with a new RocketFish Bluetooth adapter.  I did NOT have this problem when I was using a Kensington USB Bluetooth adapter.  One big difference that I notice between the two adapters is that the Kensington adapter came with an updated version of the Toshiba Bluetooth Stack software which contained its own DUN drivers.  However, the new RocketFish Bluetooth 2.0 EDR USB adapter does not seem to work with the Toshibal BT Stack.
    Maybe this helps.  Maybe it doesn't.  Either way, I don't care.  It's how I roll.  I'm a smart ass.
    I will check back for any additions to this thread.  I hope we can figure it out!  I will also post more Prose of Indifference.
    Post relates to: Centro (AT&T)

  • Hotsyncing a palm centro using a bluetooth adapter and windows vista 64 bit

    Please help. I have read and followed all of the other suggestions on this forum and nothing has worked. 
    I have a palm treo.  When I try to hotsync using the bluetooth adapter, it gives me a message stating:
    "unable to connect,port is being used by another application".
    I have rebooted, soft reset, etc.    and still get the same message.  
    I do not know how to set up another port on the windows vista program.  That was one suggestion.
    I have selected both bluetooth and serial port under the hot sync manager.
    Nothing works.
    Any help is greatly appreciated.
    thanks 
    Post relates to: Centro (AT&T)

    Hello akashmedehrotra and welcome to the community.....
    Windows Vista 64 bit is only sync with a wireless connection.  Either Bluetooth or Infra Red.  The M515 does not have bluetooth, so you would have to purchase an IR Dongle and sync using Infra Red.  You won't be able to sync with the USB cable on your desktop.
    Colapop

  • Updated to Windows 8.1, Having Problems with Touchscree​n, Bluetooth, and Mouse

    So, I'm having a few problems that I've tried googling and even looking through all these threads about the same problems but I can't seem to find someone (HP tech OR User) with a solution.
    I have a few problems:
    1) Touchscreen doesn't work anymore
    2) Mouse pointer does not appear on screen anymore (It's not "invisible" it's just completely not there)
    3) Bluetooth file transfer from my phone (Galaxy Note 3) to laptop and vice versa does NOT work
    There are also a few things that I've already tried:
    1) Hardware and Software troubleshoot
    2) Updating drivers
    3) Removing and re-installing programs (Synaptic)
    4) Connecting to a mouse (which solves the mouse problem, but when disconnected, the moust pointer is stuck where it was last pointing)
    5) Restarting the laptop (multiple times into different modes)
    My laptop is the HP ENVY TouchSmart m6-k025dx Sleekbook (Energy Star)
    And I've only had the laptop for a few months. EVERYTHING was GREAT until I updated the stupid Windows 8.1 update. I've been sitting here for a good week now trying to figure out a way to fix this. Really about to throw this out the window.
    PLEASEEEE AND THANK YOU!

    Hello amykwon0520,
    Welcome to the HP Forums.
    I see that you've updated from Windows 8 to 8.1. That since doing so you have three primary issues with the Notebook. I will do my best to help you with this.
    I thank you for provide the amount of information you have. I do have a few questions for you to start with though.
    1) After updating to Win 8.1, did you make sure that all updates were completed? (Please check to make sure all Windows updates are completed, as well as using the HP Support Assistant to verify drive updates are completed.)
    2) The driver updates that you've complete. What driver's have you updated? Where did you do the updates from? (device manager, downloaded from online, ect..) If downloaded, was it form this page: HP ENVY TouchSmart m6-k025dx Sleekbook Drivers?
    3) Did everything work correctly prior to the updates to 8.1?
    To address the issues that you mention having since doing the update, I have a document for each one that may help you with resolve it.
    1) TouchScreen not working - Please following the troubleshooting in this document: Troubleshooting Touch Screen Issues in Windows 8.
    2) Mouse point not appearing on screen/touchpad not responding - Please following the suggestions in this document: Using and Troubleshooting the TouchPad or ClickPad (Windows 8).
    3) Bluetooth and file transfers - Please refer to this document: Using Bluetooth Devices (Windows 8).
    *Note* All documents say Windows 8, but the steps do apply to 8.1 as well.
    Try the documents for each issue and let me know if they are able to help you resolve the individual issues. Also, if you need further assistance please reply with answer to my questions above. I hope this is all able to help you out.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

Maybe you are looking for