Storm 2 9550 with BMW - Bluetooth stays active all the time

I changed my phone recently and bought a Storm 2 9550. My old Verizon phone (Motorola Z60) used to work with my car without any problems.
At first, I didn't have any problems with the new phone while on my car's Bluetooth. However, after activating my phone with the company e-mail functions, the Bluetooth is a nightmare. As soon as it is activated, it stays activated even thought am not talking to anyone and turn the car radio off. I can't change channels on the radio, because the Bluetooth is always active.
It can't be a problem with the car as it used to work with my other phone. Something happened when I start to get my company e-mails on the phone.
As soon as I am done with my phone call, I have to disable the Bluetooth otherwise it drains the battery as it stays connected.
I did unpair and re-pair stuff... Is there a solution to this?
Zack04

Delete CleanMyMac2.  You do not need it and may be a contributing reason for your problem.
Check Activity Monitor for applications that may be using a lot of CPU resources:
http://support.apple.com/en-us/HT203184
Run an Apple Hardware Test:
http://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
You also might test the MBP with the original RAM module in place of the 8GB module you installed.  There may be compatibility issues.
Ciao.

Similar Messages

  • How to keep the save-button active all the time?

    Hi!
    I'm using mobile sales 4.0.
    On a tile i've only fixed questions and combo boxes with yes and no ...
    When i write manually a "yes" in the combo box field the save button is active - When i use the combo box with a mouse click the save-button isn't active.
    What are the settings i've to do to keep the save-button active all the time?
    Thanks a lot in advance.
    Best regards,
    Ingo

    Hi Ingo,
    If your combobox is a bound control, then when you change a value in it, the save button should be enabled. Strange. But anyway, you can do this.
    In the <b>combobox_OnValueChanged2</b> event, make a call to makeDirty method in the tile:
    If boundAttributeChanged Then
         <b>anchorthatyourcombotiedto</b>.bo.MakeDirty True
    End If
    This will make the Save button enabled.
    Regards, Vadim.

  • N95 8GB camera light stay on all the time

    I have had the N95 for 5 months and have been very pleased with it. I have now developed a problem with the camera light. not sure how or when it happened. Other than the fact the camera light stays on all the time, the only way to get the light off is to remove the battery...!!!
    Is there a simple solution or does this need to be returned for repair

    Hi I've been having this same problem this week! I'm going to wipe my phone and re-install the software update and see if that works, otherwise it's off to Vodaphone to be repaired
    It's strange it's just suddenly started doing it, and it's been a while since I first installed the latest update, when it came out.
    D.

  • Quick Launch buttons stay on all the time...6910p

    Hello all...first time here...I have a HP 6910p that the lights on the quick launch bar, stay ON all the time...even on battery, or ac....with the laptop OFF...I am really confused about this one..and I HOPE someone on here can help
    I have replaced the motherboard, and the way I look  at it, it cannot be the OS because it is not powered up when this happens...
    On battery alone, does the same thing, lights on all the time.
    I have remove the ribbon cable that comes from the  power on button circuit board,,, still does it.
    I removed the processor, still does it.
    I have updated the bios, to version F.17 and there is a newer one I think to version F.19
    I am a complete lose about this one..
    What could make these buttons light up while it is completly down?
    Scratching my head on this one...
    Thanks for any help
    Kenny

    @Kennynva 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • GPRS or Wifi stay connected all the time

    I am in a big dilemma. A few days back the GPRS or Wi-Fi connection always connects on its own and stays connected for hours! It used to connect only when required (exchange or Push mail set to synchronize every 30 minutes). It used to connect, check mails and disconnects automatically. But now, it stays on all the time. I checked all my mail connections and they are all set to check mails every 30 minutes. I made sure there are no apps running in the background also.
    I called Nokia care and their suggestion is to format the phone and try. But I have so many pics, videos and data that I do not want to format.
    A better solution (than hard reset/format) is always welcome.
    Thanks.

    Hi Pravin. Although it does not transfer any data, my concern was the connection always being active and battery life getting shortened. Anyways, the connection always being on according to me is a bug.
    After I did the factory reset, I came to a conclusion that it was one of the emails that I had configured (5 email accounts + 1 exchange account) and one of the email accounts was hanging this.
    It is much better now after a factory reset.

  • Satellite L655-11J - Hard disk activity all the time

    Toshiba please I need help
    The first run of my laptop I entered my location my name and a password, I install Toshiba updates and Windows 7 updates (the notifications I got) then I noticed the hard drive is active all the time and the laptop is very slow. I tried a lot to restore the original Toshiba image the built in the laptop and I finally did it thinking maybe I did something wrong
    The hard disk drive still always active (don't know what reading or writing) no monitoring for any activity the laptop very slow and lot of seeking sounds.
    any solution please, I got this problem the first use of it :(

    I know it has a guarantee and they will replace it for free, but it was a gift from Saudi Arabia, I'm now in Syria :( I've to wait until on of my relative go back there :D
    I went to Toshiba in Syria they charge my 7 $ to tell me the hard is defective although I knew it was so, and I will need to pay 100$ for a replacement so I will wait ;)
    thanks all, it was my mistake, it is just I noticed the HDD light always on in windows 7 and it was not on in USB Linux so I thought it was a system problem, I didn't have much time to work on it and make tests :D
    I'm sorry again

  • My iphone 3 bluetooth is searching all the time

    my iphone 3 bluetooth is searching all the time ,it is not working properly
    ple solved this problems

    That's completely normal.  Everytime you open up the bluetooth settings menu, it will indicate the bluetooth is searching.  It stops when you get out of the menu.

  • Does Apple TV stay on all the time? If not, how do I turn it off?

    Does Apple TV stay on all the time? If not, how do I turn it off?

    You can put it in standby via the settings.

  • Screen stays on all the time power savings set up

    My imac's screen stays on all the time now once I upgraded snow leopard to 10.6.3 it has been doing this since I got the settings so that the screen turns off 3 minutes after inactivity but the screen never turns off now.
    the only time the screen turns off is when front row is running.
    Any ideas?

    That is a bit quick to turn off the display from inactivity but that would be a personal choice. I let mine run for at least 10 minutes before the Screen Saver activates and then another ten minutes before turning off the display.
    Try resetting the PRAM and the Systems Management Controller.
    Reset the PRAM
    • (Re)start the computer
    • Immediately press & hold the CommandOption+PR keys
    • Wait for two startup chimes
    • Release the keys and allow the computer to boot.
    Reset the SMC
    • Shut down the computer.
    • Detach the computer's power cord.
    • Press and hold the power button for 5 seconds.
    • Release the power button.
    • Reattach the computers power cable.
    • Turn on the computer.
    Dah•veed

  • Why does my home screen light stay on all the time.

    My homescreen stays on all the time.  The only way to turn it off os to puch the top button. It even stays on while its charging.  Its draining my battery! HELP

    Check Settings>General>Auto-Lock and see what the time setting is.

  • Voicemail icon stays on all the time

    My voicemail icon keeps showing there is 1 voicemail.  When I sign in to my voicemail, it is empty, but the icon and message that there is 1 voicemail stays on all the time.

    Samsung Galaxy SIII (SCH-1535), Android 4.1.3, Kernel3.0.31-1152558 (09/23/13)
    My solution was to:
    - Access the phone's Settings
    - Go to Application manager
    - Roll over to 'All' applications
    - Select the red Verizon Voicemail app
    - Clear Data
    - Back one menu to the green Verizon Phone app
    - Clear Data
    - Exit the Settings back to Home
    - Turn the phone completely off and back on again
    The notification icon for me is gone. Finally.
    -Wes

  • Time capsule staying on all the time

    Should I worry about my new 2TB time capsule staying on all the time?

    no.
    it's designed to run 24/7.

  • My iphone won't power down and stays on all the time.  I have rebooted but it still wont power down. any solutions?

    My iphone stays on all the time and won't power down.  I have tried rebooting but it still won't power down. any suggestions?

    i mean that after i use my phone it won't go to a black screen after a few minutes...i guess maybe its called to 'sleep' but the screen stays bright...the light doesnt dim.

  • Make audio (optical) port active all the time

    Well, as my topic says... Is there anyway to make the optical audio port active all the time while I have the connector inserted?
    My issue is that it shuts down when I don't play any music/video on my MBP and my reciever doesn't recive a signal, in that way it makes a humming sound...
    Very annoying.
    Any idea?

    Hello MrDanne,
    No, you cannot make the optical audio port active 'all the time' for when your Mac is shutdown, this includes the all internal electrical circuits (besides your power unit) thus the port cannot be active.
    The humming sound is known as distortion, this occurs because there is an un-avoidable interference caused by particles when there is no signal communicated through the cable.
    When you shut down your MBP, you should also turn off the receiver.

  • Should Bluetooth switched on all the time on my mac Pom pro

    Should I  Bluetooth switched on all the time on my mac Pom pro

    Use it only when you need it.  Keeping applications open which are not needed will just shorten battery life if you are under battery power and will unnecessarily slow down the MBP.
    Ciao.

Maybe you are looking for