Storm 2 switched between edge and EDGE network.

I have an unlocked Storm 2 on the Fido network, it is a Verizon phone. 
It seems to switch between the EDGE and edge network. I have tried all the different settings in the mbile network preferences and it doesn't help.
Does anyone else have the same issue? 

I think I got an answer for this question.
The version number displayed is the one that was written to Active Directory at the time the Edge subscription was created. Because EdgeSync is a one way process, the version number does not update as you update the Edge Transport server to newer versions.
If you want the version number to reflect the current value, recreate the Edge subscription

Similar Messages

  • Autoselection for a switch between wired and wireless network

    Hello,
    We currently have a VTC codec installed on a mobile cart that can connect via wireless or wired network.  The cart has the Linksys WET610N Dual-Band Wireless-N gaming and video adapter bridge.  If you want to go wireless you will have to unplug the CAT5 that goes into the walljack and plug in the cable from the bridge into the codec. 
    We need a 3-5 port switch. Port 1 will connect to the wireless bridge.  Port 2 would be available to connect to a wall jack.  Port 3 will connect to the codec.
    We need the ability for the switch to autoselect port 1 and 2.  If Port 2 is not connected (no link light), then Port 1 will be active.  If Port 2 is active, Port 1 will be inactive. 
    I need to know how to configure the bridge and a network switch if this is scenerio is possible.  Any help is appreciated.
    Thanks,
    Aaron

    Well, I thought i had tried this before, but I followed another board's suggestion of turning of IGMP proxy and it is now working. I can see my iTunes server which is wired on my wireless devices.

  • Miix 2 10" led diod on the switch filter between display and edge frame

    Hello,
    i have Lenovo Miix 2 10" and i find out, that indicative led diod on the switch filter between display and edge frame of tablet when is the dark.
    It is obvious in the night and tablet is moderately incline...
    https://onedrive.live.com/redir?resid=2193765AA1BD42F1!7232&authkey=!AJ7TZCTfNtVztuI&v=3&ithint=phot...
    Is it reason for reclaim?
    Thanks
    sg

    Hi chuck72352,
    after you have sorted your data, you can use the InRange Function. Combined with a "search 1D Array" you'll get the range you really want.
    Mike
    Attachments:
    ArraySubset.PNG ‏25 KB

  • Font sizes between  Photoshop and Edge - Any Accurate conversion table?

    I have been trying to make sense of the font sizes between  Photoshop and Edge. It seems that the conversion tables I have found do not actually give the right numbers and I am wondering if there is a table from Adobe that would make it easy to have the right size rather than an approximation.
    I prefer to use text in Edge rather than Photoshop for many different reasons one being dynamic text.
    For example a font in Photoshop in a 780 x 475 image is 8pt - In Edge, according to conversion tables it should be 11 px but it is totally wrong. It needs to be closer to 30 px to be about the same.
    So, Adobe Team, any documentation on that?

    By the way, I have to correct the numbers but they still do not make too much sense. The artist gave me a 300 dpi file so of course the px size what wrong. After converting the file to 72 dpi, the font size happens to be 33.33 pt or 40 px which is now way too big in Edge.  It looks like the size my just be the same 33.33 pt would be 33.33 px. Is this correct?

  • Unable to switch between 3g and 4g on my Lucid

    After an update a week or so ago, my LG Lucid has completely lost the functionality of switching between 3g and 4g. As 4g is a battery hog I kept it mostly on 3g (but not always) and since the update , I am stuck on 3g. Took it to the Verizon store for a techie to look at it and he was stumped. I used to access thru "settings" - "about phone" - "network" - "network type and strength" , which brought me to some toggles where I could choose the network best suited to what I was doing. Now this screen is gone completely and only shows signal strength. The techie suggested a factory data reset, which would not only erase all my items from my phone, but if it did provide 4g service, I would now be stuck all the time on that. I told the tech guy I would wait for a fix to this. My question is, are there others out there with this problem or is there a fix for it. I contacted LG and they said they have had no updates to the phone. Is Verizon denying the problem or even working on it ?????

    I have a related issue with my LG Lucid. It tends to get stuck in 3g in areas that I know are 4g. A phone restart usually takes care of it but it sure is a pain to do that. If that fails then a battery remove/replace fixes it. Neither are good options but worth considering while we wait for an update.
    There are several 3g/4g switch free apps available too but none that say they support Lucid. I found that 3G/4G On/Off (Toggle 3G) by JuYeo! Oh works well to turn on 3g when the Lucid doesn't do it but I haven't found a way to turn on 4g.

  • Can I switch between Illustrator and Photoshop? (I am subscribing to only one product per month)

    Can I switch between Illustrator and Photoshop? (I am subscribing to only one product per month)

    Absolutely. Just change the sim card and the APN details in the settings. You can do this either manually if you know them or just sync with iTunes after changing the sim and the details will sync. Once you have done it once for each network the device seems to remember the details.

  • Switch between CDMA and GSM Iphone 5

    Hi,
    I am wondering on the Verizon Iphone 5, can you switch between CDMA and GSM via a setting or is it still like the iphone 4s where you have to remove the sim card to switch back to CDMA?
    Thanks.

    A SOLUTION: cut another corner and insert the nano-SIM upside-down, and keep a SIM card ejection tool on your key ring or tape one to your phone's case or both.
    Adam, and anyone else who like us, was hoping that there were a software based method that would allow iPhone 5 users the option of toggling between Verizon (or other CDMA carrier) and whatever other SIM Card based GSM carrier we have inserted/installed into our SIM tray.
    For myself, I have a SIM card with the "Minutes" type of plan, specifically the minutes plan that gives 2000 minutes for $100, which is good for one year. This is my backup network. 
    Since I do not need a SIM for the CDMA network that I use as my primary network, my SIM slot is empty (I am not running LTE, only 3G).
    So, in order to be able to switch my handset from one carrier to the other, which would be most helpful in the event of a system failure on my primary carrier I can switch over to my "backup/gsm network; it would be very, very nice to be able to toggle between the two networks, (like in the old days where we could simply select either the 'A' {non-wireline} or the 'B' {wireline} carrier/network) by simply pressing a couple-few buttons.  It is funny to me to actually realize my old "Brick" phone actually had a feature lacking on my iPhone 5.
    This would have been great during hurricane Sandy when my Verizon service was (literally) dead in the water for several days.  And, there is always the possibility of a cell site going down on the primary network, again.

  • 7344 servo motion switching between open and closed loop operation

    I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
    In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
    I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
    I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
    Bob

    Jochen,
    Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
    My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
    Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
    Bob

  • When frequently switching between mobile and desktop view

    When I frequently switching between mobile and desktop view I have to open the layers every time since they get closed/collapsed. Adobe may need to fix it for the next version.

    You can use CTRL+# to switch between Code and Design View.
    By the way, this is the Dreamweaver Application Development forum which deals with questions about using server-side scripting languages like PHP or ColdFusion. General Dreamweaver questions should be posted in the regular Dreamweaver General Discussions forum.
    And while I´m at it: please use descriptive headlines such as "how to switch between Code and Design View" for your posts -- mentioning your screen name "Goula129" is not helpful to other users.

  • How to quickly switch between straight and curly quotes?

    I've recently moved from a Windows XP machine with MS Office to a Mac Pro with Pages.
    For the kinds of documents I typically work on, sometimes I need to have straight quotes, and sometimes curly quotes. With MS Word, I was able to create a couple of macros that would switch these preferences for me. With these macros linked to an icon in the toolbar, switching between straight and curly quotes was as easy as clicking a button.
    Now I'm looking for a way to do this -- or something like it -- with Pages.
    I know how to switch back and forth using the preferences menu, of course, but I'm looking for something quicker and simpler, since I often have to make this change several times a day.
    Can Automator do something like this? Or is there another way?
    -- Eric

    Turn off the auto correction and you can type Curly quotes with:
    left single ‘ option ]
    right single ’ option shift ]
    left double “ option [
    right double ” option shift [
    If you want the French quotes « and » they are option and option shift |
    Peter

  • Can't switch between  fill and outline.

    Here's the problem: I'm on an iMac, new, trying to use illustrator CS5. after using CS3 for a few years. In CS5, if I draw a shape, flat, in the illustration, then try to give it an outline, or change the outline, or do anything with the outline, I can't. If I click on the Shape tools in the toolbox and draw out an oval, for example, I can switch between outline and fill without any problems. Select shape, go to toolbox, select curved arrow for switching from one to the other. That's it. But if I draw a freehand shape, then try it, i can't do it. THIS IS A BIG CHANGE FROM PREVIOUS VERSIONS OF THE APP. GET IT? What is the problem? If it's something I have done, fine, tell me and I'll fix it. I tried calling Adobe support in Bangalore, and it took 30 minutes just to get the problem thoroughly appreciated by the techies. They just couldn't get the idea for half an hour! I had to go over it 4 or 5 times. And they couldn't come up with an answer. they were no help at all. I'm hoping the forum will yield better results. This is pathetic, guys. Your 90-day tech support is a worthless piece of crap, guys. The only tech support we have is this catch-as-catch-can forum. I've been using Illustrator since 1987, (illustrator 88) believe it or not, it's true. And I've always been able to get tech support to cure the ills. Not any more. Is that the way Adobe plans to offer tech support? if there were a way to contact Adobe Tech Support by going around Adobe Bangalore, i would use it. But, alas, I am stuck with this.

    Dear Monika and Mylenium: I figured out part of the problem, but not the solution: The shape I had drawn -and coudn't  switch between fil and stroke on-is one I had already done a gradient mesh on, too. I had later abandoned the gradient mesh by using the option key to delete mesh lines, but that didn't take the shape all the way back to its original flat state. So it wasn't a plain drawn shape any more. So how do I release the gradient mesh  to get back to  a flat shape? I'm also having trouble keeping the shapes in RGB or CMYK mode-they keep defaulting back to greyscale. Could that also be a symptom of using gradient mesh? Note: I'm using gradient mesh for the very first time now; I've never used it before. It seems to leave a lot of unexpected baggage behind. I would send a screen shot, but if I start up Grab or Voila, all the AI pallets go away, and that's half the information.  So how do I control gradient mesh?

  • Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

    Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

    When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from  Camelotand Matt Clifton
    Could it be that CORRECT ANSWER needs better defining by Apple?
    That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
    Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

  • JSF / Switch between HTTP and HTTPS

    Hello!
    I want to switch between HTTP and HTTPS using JSF.
    Under Apache Struts framework I can use struts extension "sslext.jar" to configure switching between http and https in one web application.
    e.g. Login-jsp should be secured, all other jsp's should run unsecured.
    Any ideas?
    regards
    Harald.

    Thanks,
    I made the necessary enhancement for the second phase, password confirmation required when return to SSL zone after leaving it after a succesful login.
    I did the following:
    1) create a class in the application scope and/or singleton class with the servlet paths that require SSL
    2) create a plugin that reads ActionConfigs from the ModuleConfig
    3) create a filter that sets a request scope flag that says that password must re-entered.
    Code Extracts:
    1) MainshopContainer application level parameter singleton class:
    private static HashMap sslZoneMap = new HashMap(50); // key = servlet path of request, example /login.do
    public boolean isInSSLZone(String servletPath)
    return this.sslZoneMap.containsKey(servletPath);
    public void addToSSLZone(String servletPath)
    this.sslZoneMap.put(servletPath,null);
    public int getNumberOfActionsInSSLZone()
    return this.sslZoneMap.size();
    2) Struts plugin
    add a call to loadSSLZoneMap in plugin init method:
    loadSSLZoneMap(config, mainshopContainer);
    private void loadSSLZoneMap(ModuleConfig config, MainshopContainer mainshopContainer)
    throws ServletException
    try {       
    ActionConfig[] actionConfigs = config.findActionConfigs();
    for (int i = 0; i < actionConfigs.length; i++)
    if (actionConfigs.getParameter().indexOf("/jsp/account/") < 0) // /account/* = URL path for SSL zone
    // not found = not ssl zone
    System.out.println("loadSSLZoneMap, following actionConfigs excluded from SSL Zone: "+actionConfigs[i].getPath());
    else
    // found = ssl zone
    String servletPath = actionConfigs[i].getPath()+".do";
    mainshopContainer.addToSSLZone(servletPath);
    System.out.println("loadSSLZoneMap, following servletPath added to SSL Zone: "+servletPath);
    System.out.println("loadSSLZoneMap, number of actions in SSL Zone: "+mainshopContainer.getNumberOfActionsInSSLZone());
    catch (Exception ex)
    ex.printStackTrace();
    throw new ServletException("Exception caught in loadSSLZoneMap: "+ex.toString()+" Initialization aborted.",ex);
    3)
    public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain)
    throws IOException, ServletException {
    HttpServletRequest req = (HttpServletRequest) request;
    HttpServletResponse res = (HttpServletResponse) response;
    String servletPath = req.getServletPath();
    boolean secure= this.mainshopContainer.isInSSLZone(servletPath);
    The wole picture:
    The filter adds a RequestDTO object that includes all request parameters, one of them is the secure flag.
    I have a session scope class UserContainer that includes all the session parameters, one of them is the lastRequestDTO.(last made request)
    At the end of all my jsp's I set the lastRequestDTO variable.
    In that method I set the passwordConfirmationRequired flag if needed:
    public void setLastRequestDTO(RequestDTO _lastRequestDTO)
    if (this.lastRequestDTO != null && this.lastRequestDTO.isSecure() != _lastRequestDTO.isSecure())
    this.setPasswordConfirmationRequired(true);
    this.lastRequestDTO = _lastRequestDTO;
    I read the passwordConfirmationRequired in all my jsp's in the SSL zone that allow editing or deleting and if that flag is true, a valid password must be re-entered in order to make the updates.
    When the password is OK I reset the passwordConfirmationRequired to false.
    I need some help for the first phase, that is SSL setup for all actions related to jsp's with url path /account/*
    I tought I could define it in the web.xml:
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>All Account Related Pages</web-resource-name>
    <url-pattern>/account/*</url-pattern>
    </web-resource-collection>
    <user-data-constraint>
    <transport-guarantee>CONFIDENTIAL</transport-guarantee>
    </user-data-constraint>
    </security-constraint>
    but that doesn't work and finnaly understood why:
    Example: /WEB-INF/jsp/account/login.jsp corresponds to /login.do
    The url pattern /account/* at the container level is never encountered.
    Is it allowed to declare the following action path: /account/login instead of /login?
    If yes I could add following prefix /account to all my action paths and forward paths and this could resolve my problem.
    What's your opinion?
    If no, would your library resolve this?
    Will all the Struts/JSP/JSTL url generating tags pick-up the required protocol (http/https) according to your configuration file?
    Regards
    Fred

  • Is there an easy way to switch between ehternet and wifi connection without having to disconnect the ethernet cable?

    Hi All
    Was wondering if there is an easy way to switch between ethernet and wifi connection on Apple TV without having to disconnect the ethernet cable. The reason I ask is that I find it quicker to use my ethernet connection via a Netgear Powerline Home Theatre Set-up to stream Trailers and Movies on the Apple TV, however this is no good when connecting directly to my Mac to stream music or TV shows in iTunes, so revert to the wifi connection that I created on my Time Capsule to do this.
    Would be handy if Apple TV had a menu option where you could manually change the connection type depending on what you were doing, as per above scenario.
    Cheers
    Brett

    brettfromseabrook wrote:
    Hi All
    Was wondering if there is an easy way to switch between ethernet and wifi connection on Apple TV without having to disconnect the ethernet cable.
    Unfortunately not.

  • Switching between Design and JSP tabs add code?

    I am new to SJSC and I am taking the time to go through all of the little odds & ends of the IDE.
    I was looking at:
    http://blogs.sun.com/roller/page/tor?entry=computing_html_on_the_fly
    And I decided to try this.
    When I add the following in the JSP tab:
    <h:outputText binding="#{Page1.tableHtml}" id="outputText1"/>Save.
    Then click on the Design tab, then go back to the JSP tab, I now have:
    <h:outputText binding="#{Page1.tableHtml}" id="outputText1"/>
    <h:outputText binding="#{Page1.outputText1}" id="outputText1"/>It's late here, but this doesn't make any sense, why would switching between Design and JSP tabs add code?
    Thanks,
    --Todd                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Girish: I followed these steps:
    1.) Downloaded:
    Sun Java Studio Creator 2, Multilanguage creator-2-windows-ml.exe 254.23 MB
    2.) When I started the install, I received the message:
    Welcome to Sun Java(TM) Studio Creator 2! You are installing: Sun Java Studio Creator 2 development environment Sun Java System Application Server Platform Edition 8.1 2005Q1 Update Release 2 Bundled database
    3.) Installed version:
    Product Version: Java Studio Creator 2 (Build 060120)
    IDE Versioning: IDE/1 spec=5.9.1.1 impl=060120
    Also, Under, the Palette window: Standard component list, there is a component labeled Output Text.
    When placed on a jsp, the following code is produced:
    <h:outputText binding="#{Page1.outputText1}" id="outputText1" style="position: absolute; left: 24px; top: 48px"/>Thanks,
    --Todd                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Maybe you are looking for

  • Temporary wim-files for multicast transmissions still needed for WDS installation in Server 2012 R2?

    Acording to https://technet.microsoft.com/en-us/library/dn281955.aspx one of the new features for WDS in Server 2012 R2 for multicast is: Improved multicast deployment by eliminating the need for making a local copy of the install.wim file. You can a

  • How do I get banner & Spry Menu Bar to appear on every page?

    Hi, I am a new user of Dreamweaver CS6 an a relatively new user to website development in general. I just followed along through Davide Powers "Creating your first website" tutorial series and found it to be very helpful.  I made it through all six p

  • Photoshop workflow

    i do simple daily tasks with adobe photoshop cs and i was hoping automator would make this easier. let's say i have a folder full of images. what i want automator to do for all of the images is... 1) open with photoshop 2) select-->all 3) edit-->stro

  • No DSL, No Repair Techs, No Customer Service

    I'm fed up. I feel like I'm being scammed and all I can do is sit here and take it. My DSL has been going out every single day, multiple times, for weeks. Resetting the modem sometimes helps, more often not. When the internet does come back on, 75% o

  • Financial Reports - Schedule Batch

    I have a report Book that has a User POV. In the Book, the reports are set to Book POV. There are multiple reports in the book, with 3 different datasources. I have created a batch with this report books. I am trying to schedule the batch using "MULI