STP Quits When Attempting to Create Audio File Project from Multitrack

When I double-click a clip in a Multitrack to edit it in an audio file project, STP opens the "Create Audio Project" window and allows me to save the file project, but then quits and closes STP. I am working on a tutorial file from the Apple Pro Training Series: Soundtrack Pro. I have deleted and reinstalled the project files from the book - same result. Otherwise STP has been stable. Does anyone have any ideas why this is happening and a possible remedy. Is there a way to trash prefs as in FCP?

Macintosh debugging time!
I've only ever had stuff go wrong like that once. I found and deleted a couple of plist files, and everything worked after that. Try deleting these files and relaunching the application:
<User Folder>/Library/Application Support/Soundtrack Pro/EffectsCache.plist
<User Folder>/Library/Application Support/Soundtrack Pro/Layouts/Default.moduleLayout
<User Folder>/Library/Preferences/com.apple.soundtrackpro.plst

Similar Messages

  • My PowerBook G4 pops up an error when attempting to open a file downloaded from the internet. Help?

    When I attempt to open the application that IS compatible with Mac it says "Safari can't open the file "blank" because there is no available application to open it" How can I get an application to open it?

    What kind of file? Have you tried setting an application to open it in Get Info?

  • Soundtrack Pro Crashes when opening Audio File Project

    I am just starting to use Soundtrack Pro 2 with FCP 6. When I try to send an Audio File Project from FCP, Soundtrack Pro starts up, then closes. If I try to open the Audio File Project within Soundtrack Pro the program closes. Any Suggestions? Thanks.

    In trying workarounds, I exported the clip as a movie from FCP then tried to open it in Soundtrack Pro. STP closed. I also tried opening the (sent).stap file that FCP generated, and Soundtrack Pro closed again. Also, STP does not give me the error window saying the program closed unexpectedly and do I want to report it. It just stops. Any thoughts? Thanks a lot.

  • IMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso

    iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
    iSO image document but the box that should open to select use iso does not open. How should I proceed?

    The Mac SuperDrive built into your Mac is the Optical drive.
    1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
    2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
    3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
    4. Partition your drive.
    5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2.

  • Error When Attempting to Create a Password File

    hi all,
    i recevied the following error when attempting to create a password file via the ORAPWD utility. can anyone offer any insight into what is causing this problem?
    $ ./orapwd file=/appl/oracle/product/9.2.0-64bit/dbs/orapwLEAF password=XXXXXX
    Unable to find error file.
    Error code 5
    thanks

    Try to set env variable ORACLE_HOME
    Best Regards
    Krystian Zieja / mob

  • QuickTime Error Code 0 when attempting to create MPEG-2 Video File

    I am getting the above error when attempting to create an MPEG-2 file from an FCP Timeline; what might cause this problem and how can I fix?

    I'm real sorry. I am just lost. So if it does allow me to access via USB, what am I doing wrong? Why am I getting this error? I tried to go in and just import the video first and I could see the files, however they were gray, so it was not an option. Then I tried dragging them from the desktop icon and received the error. What else can I try to get my video loaded in imovie? I'm still fairly new to the mac. I have had mine for a year, but am still learning and would consider myself very green still. I have always done pretty well with a PC, so I catch on pretty quickly, but I definitely need some guidance here.

  • Using PSE on Mac - when attempting to Edit a file system is saying need Premiere Elements to proceed. Help pls!!

    Using PSE on Mac.  When attempting to Edit a file system advises that requires Premiere Elements.  Help!!!

    Hi Cody
    Sorry to hear about your difficulties.
    It should be very uncommon for Pages to crash. I've been using it for years on a daily basis and it's only happened to me once except when I was trying to replicate a bug for someone.
    Your experience might be a symptom of an underlying problem with your system. I recommend that you back all your stuff up now.
    Whilst trying to isolate the issue, I recommend that you manually create frequent backups of your documents using the Finder after a successful save until you can trust it.
    Next, use disk utility to do a repair permissions on your hard drive.
    Also, after quitting Pages, try trashing your ~/Library/Preferences/com.apple.iWorks.Pages.plist file (back it up first if you want) and restarting Pages.
    If this doesn't work, there are loads of troubleshooting tips here: http://www.thexlab.com/faqs/faqs.html. I also recommend that you read the tips on system maintenance.
    In case you didn't already know this, Pages files are actually packages. Control-click on the icon and select Show Package Contents to see what's inside. You may be able to recover some text from the files in there. I don't believe there are any repair utilities. Nor is the file format available.
    I hope this helps you.

  • Get 'Generic Error' when attempting to import .mov files with transparency?

    I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
    I have uninstalled the DVCPro Codec, but it didn't help.
    I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
    I've seen this issue on the web, but never a solution? Anyone?

    Hi Terence,
    I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
    Regards,
    Søren

  • Problems converting PDF to MS Word document.  I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the co

    Problems converting PDF to MS Word document.  I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file.  I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure.  I attempted to convert the entire document and same result.  I specifically purchased the export to Word feature.  Please assist.  I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

    Hi sdr2014,
    I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
    So, let's try this:
    If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
    Please let us know how it goes.
    Best,
    Sara

  • I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

    I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

    Hi rmarchione,
    Can you try restoring preferences and let us know if it helps?
    Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
    Thanks,
    Preran

  • When attempting to create an SSRS Report in SharePoint 2010 Dashboard Designer and change the Server Mode from Report Center to SharePoint Integrated

    Hi,
    When attempting to create an SSRS Report in SharePoint 2010 Dashboard Designer and change the Server Mode from Report Center to SharePoint Integrated, I get the following unhandled exception:
    ************** Exception Text **************
    System.InvalidOperationException: There was an error generating the XML document. ---> System.InvalidOperationException: Instance validation error: '2' is not a valid value for Microsoft.PerformancePoint.Scorecards.SqlReportViewData.SqlReportViewDataServerMode.
       at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write1_SqlReportViewDataServerMode(SqlReportViewDataServerMode v)
       at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write3_SqlReportViewData(String n, String ns, SqlReportViewData o, Boolean isNullable, Boolean needType)
       at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write4_SqlReportViewData(Object o)
       --- End of inner exception stack trace ---

    Hi,
    According to your post, an error occurred when you integrate SQL Server Reporting Services with SharePoint.
    1. Please check the steps as the link below:
    http://technet.microsoft.com/en-us/library/ff724283(v=office.14).aspx
    2. Try to clean the configuration cache on all of your SharePoint servers and re-tested.
    http://blogs.msdn.com/b/josrod/archive/2007/12/12/clear-the-sharepoint-configuration-cache-for-timer-job-and-psconfig-errors.aspx
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some annonomus file, to which I have to go through several steps to get to My

    Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some anonymous file, to which I have to go through several steps to get to My Documents, and I can't seem to select the default in my preferences. HELP PLEASE!!!

    Before this update of what software from what version to what version using which OS?

  • Authentication window not populating when attempting to move a file

    When attempting to move a file that will need administrator authentication, the authentication window to enter a password does not populate. Thus, I am unable to move the file.

    Linc,
    I didnt get back with you this week as we've discovered a number of other "interesting" issues with the iMac. They all seem to (possibly) be related to privilege issues: 1. Cannot move photos to ~Library/Desktop Pictures, 2. Cannot access System Preferences/Security&Privacy (click on the lock to make a change and the User Name and Password "Unlock" window will not appear.) 3. When attempting to install the MS Office For Mac update, the installer will not respond. 4. Cannot boot from an external drive. The computer wants to reinstall the OS X Yosemite when attempting to boot from an external drive.

  • When exporting to html, audio files placed in system do not turn off.

    When I place a audio file into keynote and play the presentation via an html export, the audio files don't stop playing.  If put the keynote.html on the web the only way i can turn off the audio is to refresh the page.  I want the audio to stop playing when I advance to the next slide.  Any solutions?

    This is how sound works in an html export at the moment, maybe it will be improved in a future update.

  • From FCP timeline...send to soundtrack pro audio file project is greyed out

    The send to multi track is not greyed out but that's not what I need.
    The stereo audio file is 48KHz and I have 7 tracks of audio in the sequence all of which are stereo except the VO track.
    If I use "open in editor" to open a stereo file from the timeline soundtrack only imports one channel.
    I'm trying to run these stero audio clips through STP using the waveform editor to quickly analyze and fix the "clicks and pops" also adding a low cut off filter to some of the clips to help eliminate some wind noise.
    Seems the only way I can get it to work is to export each clip as an aiff file and then import it to STP, edit non destructively, save as a .stap file and then reimport that .stap file back into FCP........
    Any ideas why the "send to STP audio file project" is greyed out? perhaps I have forgotten a preference setting somewhere?
    All help appreciated.
    Thanks,
    Dave
    G5 dual 2.0, 3.0 GB ram, 2x250 internal   Mac OS X (10.3.9)   FCP 5.0.4 DVDSP 4.0.3 Motion 2.0.1 Soundtrack pro 1.0.3 QT 7.0.4

    Hey, Dave. That can happen if you captured your files with two audio tracks instead of a single stereo track. The two channels will show up on two tracks, but they're not actually stereo in the quicktime file.
    When you captured, did you click the "OO" button next to the audio channels to link them to stereo? You can look at the contents of the quicktime file with Quicktime Player and see if you've got one audio track with two channels assigned to "left" and "right". If you have some other configuration in the file, check out these old threads for workarounds, or recapture if that's an option.
    http://discussions.apple.com/message.jspa?messageID=1456638
    http://discussions.apple.com/thread.jspa?threadID=259929

Maybe you are looking for