STP Won't Recognize Edirol FA 101 Fireware Interface

Anybody have any ideas as to why this is?
The FA 101 shows up in the sound control panel for in and out...it shows up as a viable inteface for GarageBand for crying out loud...why not in STP?
This is about as basic as they come in terms of getting sound (in this case VO) in. Is there a work around or some special chant I have to do?
A couple of other posts posted some nonsense about STP not really being the right software to use for recording VO or audio in...that is a highly suspect statement.
If not now...in STP 2 (which I have on order).

A couple of things . . . first, make sure you have the right information on this unit being "hot pluggable" or not. The M-Audio units are not. You have to be powered down to plug them in and unplug them. You can do some real damage if not done correctly. Second, and with the unit plugged in, and before Soundtrack is open, try choosing the audio input with system preferences. Then open up Soundtrack and see if the option is available.
I know this sounds strange, but STP isn't a full featured DAW the way Logic is . . . and even Garageband to some degree. Some of this will change in version 2, but not all.

Similar Messages

STP won't recognize audio via firewire from camera

Dear all,
I am trying to record narration using a microphone attached to my Canon XL1S and import the audio live into Sound Track Pro via firewire. This method works fine for Quicktime. Quicktime recognizes the XL1S and records the narration as I am speaking, but STP does not seem to recognize the firewire input and I get no meter levels or any indication that my audio is registering. Any suggestions? I have tried all the preferences and settings I can find. Do I need another interface for STP? Seems strange that I would if Quicktime recognizes it.
Thanks much.
Barb.

It cannot be done. STP (and other DAWs) doesn't natively support Firewire devices in that manner.
Instead, try the Quicktime or FCP approach, or even record it to tape, then import it. The better way would be to get a dedicated soundcard and mixer for that. Believe me, you'll appreciate that!
tim

Skype won't recognize my M-audio usb interface

I am planning to offer online bass guitar lessons through skype. To accomplish this, I have an audio usb interface where I connect my bass guitar to. I can hear my bass perfectly but for some reasons, skype doesnt recorgnize any coming from my audio interface. I already checked the settings in skype and I already chose my m-audio interface as the audio source. Pls help me guys.
Attachments:
skype.png ‏215 KB

I have the same problem..

Tethering: Mac doesn't recognize iPhone as a network interface

Hi all,
I've been trying to get my iPhone to work with tethering, but for some reason my Mac won't recognize it as a network interface.
Funnily enough, if I plug it into my friends new MacBook 2GHz Aluminum MacBook it does work. Just not on my ol' plastic MacBook...
Any ideas what I'm doing wrong?

Yes, I had. But I kept stopping one step too early, namely clicking on the Apply button after manually adding the new internet connection, as the DNS records etc. weren't automatically filled.
Which was stupid, of course.
But I just followed all the steps again, and am now SORTED!
thanks.

Boot Camp: Firewire Edirol FA-101 recognize like 61883 device

Hi,
I've a big problem... I've installed Windows SP2 (on a Mac pro with the last version of Leopard) under Boot Camp to use an *Edirol Firewire audio unit, the Edirol FA-101*.
The unit _is recognized NOT like a 1394 unit BUT like a 61883 peripheral_ (mLAN standard of Yamaha).
WHY???
The installation of Edirol drivers go ahead BUT in the "Control Panel" *I CAN FIND ONLY "REALTEK HD Audio Output"..._no Edirol FA-101*_ channel Audio and MIDI IN/OUT _*to choose*_.
I think I'm NOT the only with a Firewire Edirol Audio Unit FA-101 that can't work under Boot Camp...
QUESTION: *Boot Camp has a fault with all 1394 Firewire peripheral units* ???
Someone could HELP ME???... *because I need to use this unit BOTH under Windows AND OSX*
Thanks in advance.

OK my friends... I've a news.
I've found that when the installation proccess is going to finish there are some things that should be added in System Startup global entry but "somethings" makes that will not be able to be added anyway.
I've have an idea, but I don't know that could be true... is there a possibilities that REALTEK DRIVER makes a check about new changes in the Sound Control Panel and "roll -back" to a certain condition, deleting new entry in the System startup?
So, this is what Ive found:
(1) ---------------------------------
Change done by the Edirol installation process (it could be this way): value "MSPQM" (new data: "rundll32.exe streamci,StreamingDeviceSetup {DDF4358E-BB2C-11D0-A42F-00A0C9223196},{97EBAACB-95BD-11D0-A3EA-00A0C9223196},{ 97EBAACB-95BD-11D0-A3EA-00A0C9223196}")
But it has deleted by "something": value "MSPQM" (new data: "")
(2) ----------------------------------
Change done by the Edirol installation process (it could be this way): value "WDM_SPLITTER1" (new data: "rundll32.exe streamci.dll,StreamingDeviceSetup {2F412AB5-ED3A-4590-AB24-B0CE2AA77D3C},{9B365890-165F-11D0-A195-0020AFD156E4},{ 6994AD04-93EF-11D0-A3CC-00A0C9223196},C:\WINDOWS\INF\WDMAUDIO.inf,WDM_SPLITTER.I nterface.Install")
But it has deleted by "something": value "WDM_SPLITTER1" (new data: "")
(3) ------------------------------------
Change done by the Edirol installation process: value "MSPCLOCK" (new data: "rundll32.exe streamci,StreamingDeviceSetup {97ebaacc-95bd-11d0-a3ea-00a0c9223196},{53172480-4791-11D0-A5D6-28DB04C10000},{ 53172480-4791-11D0-A5D6-28DB04C10000}")
But it has deleted by "something": value "MSPCLOCK" (new data: "")
Now, I don't know what exactly is... I have to think about it... but IF SOMEONE HAS AN IDEA... LET ME KNOW ASAP.
Thanks

GB won't output to Ch 9 & 10 (digital optical) on Edirol FA-101

Hi,
I have my MacBook set up to output to the FA-101 through channels 9 & 10. Everything work fine apart from Garageband.
I also have Logic Express and you can select the output on the individual channels and also the master channel. I can't seem to find a similar thing in GB.
My GB audio peferences are set up for FA-101 input and System Settings output (as the system setting outputs through FA-101 Ch 9 & 10).
Can you change the output channel of either the master or tracks?

I'm having an issue where the Edirol FA-101 will lock up my external FW drives. It was working then one day recently (possably after an update...??) it started locking my drives - rendering it un-useable. After reading some issues people are experiencing I believe it is quite possable the Mavericks TB/FW driver. I hope they correct it soon.

IPhoto won't recognize my iPhone

hi hello, all of suddenly my iPhone 3GS will not appear in my iphones when i sync to my iMac. Now I can't retrieve any photo's I've taken. There was no preference changes, and I already tried Applications>Image Capture>Preferences>Camera:when a camera is connected, open:iPhoto. ..nothing
Still iPhoto won't recognize my iPhone. What the heck happened?? and how to fix?
Thanks for your time, James

Try trash the following file
com.apple.ImageCaptureNotifications.DeviceDiscoveryDatabase.501
from HD/Library/ Caches
and restart your mac.
If that fails: try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*What's the plist file?*
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
Regards
TD

FCPX won't recognize projects/events on my External Hard Drive

I have all my projects and events for FCPX on my external hard drive because my MacBook Air does not have enough room for it. I've been working on my Air for a couple years and I just got a iMac. I thought it would be simple enough just to plug in my hard drive into my iMac and it would recognize everything, but sadly it isn't. I've looked everywhere and I couldn't find any fixed for it. I can just create new events from my old events but that would take alot of work. I thought there would be an easier way to be able to import all my old events/project and start working on them.
*Also when I create an event on my iMac external hard drive, it puts it will all my old events in the same folder, but still won't recognize them. Stumped
Thanks

You'll be updating to FCP X 10.1.1. It uses Libraries now, whole different thing.
http://www.macprovideo.com/hub/final-cut/fcp-x-101-upgrade-guide-to-libraries-pa rt-1
http://www.macprovideo.com/hub/final-cut/fcpx-moving-and-copying-events-and-proj ects
http://www.macprovideo.com/hub/final-cut/fcp-x-rules-of-the-consolidate-command

A little problem with the "Audio-MIDI Config" for my Edirol "FA-101"

Hi to all of you!
I bought an Edirol "FA-101" a couple weeks ago, and when I try to plug and record with many mics, from the backside inputs, it seems that these inputs don't give me the "punch" I need. I mean by that that I have to go trough my old Tascam "M-30" in way to use the preamps from the mixer, so I can have a little more input "volume", and then, plug the direct output from the mixer and then plug it in the back inputs of the "FA-101".
I was wondering why do I need to do that? Cause when I take a look at the "Audio-MIDI Config" (I do work in french, so, apologize for any translations errors), the "AMC" window don't show any inputs as "selectable", and, or, "ajustable". The link bellow shows the exact copy of what I see when I open the "AMC" set-up window:
http://www.geocities.com/macjamsimages/configaudiomidi.jpg
Now, I have to explain that I had some problems in the past, when installing QT 7. I tried to remove QT 7, but I think I removed some files, maybe importants ones. So, now, what I want to know, is if that setup is normal, and impossible to configure, or is it MacOS Panther 10.3.9 that need a reinstall?
And I have to say that GB and Logic Express both recognize the "FA-101" as audio inputs. But need a little help from the mixer.
Thanks in advance!

The inputs on the back of the Edirol unit are LINE LEVEL inputs, meaning they are require a high level of voltage to give a level. A microphone plugged directly into this input will not give you the required voltage, if you were to plug either the outputs of a mixing desk or something like a CD player into it you would get a level.
First of all you must use a microphone preamplifier, like the ones on the front panel. There are thousands of companies producing these and it shouldn't be hard to find them. You could also use any mixing desk which has multiple outputs, so as to split the channels out to the relevant channels in logic.
Hope this helps.

ITunes won't recognize iPod Nano (1GB, 1st generation)

I have been having problems Sync'ing my iPod nano with iTunes, however, the more I read help articles and follow the steps, the worse the problem gets. (I'm on a PC using Windows XP)
I've gotten to the point where I updated my iPod software in Disk mode (up until then it was being recognized only in Disk mode), but when iTunes failed to recognize it when not in Disk mode I preceded to restore my iPod to factory settings, as instructed in the help articles.
Now, up until then, I still had music in my iPod, and I was being able to charge it and listen to my music even though I couldn't sync the iPod anymore. After restoring, I not only lost my music (which I was aware of), but it STILL did not fix my problem. So I started to get annoyed.
I then noticed that my iPod was being recognized by My Computer, just not by iTunes, so I began to perform the steps indicated in the following article:
http://docs.info.apple.com/article.html?artnum=93716
I restarted my iPod service - no luck
I removed iTunes - no luck
I emptied my Temp directory and restarted...
That's when iTunes stopped recognizing my iPod altogether, not even in Disk mode. Not only that, but it seems to have affected the iPod itself, since it won't turn off or exit Disk mode anymore. So now I'm scared of going though with any more steps on whichever "help" articles and making the problem even worse than it already is (if that's possible).
The only other information I can provide is that windows is still recognizing my iPod, no problem, and when I connect my iPod, iTunes actually launches... but DOESN'T recognize a thing. So I ran a diagnostics using iTunes and here's what I got (iPod diagnostics):
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
INTEL_ D945GCL_
iTunes 7.3.2.6
iPodService 7.3.2.6 is currently running.
iTunesHelper 7.3.2.6 is currently running.
Current user is an administrator.
The current local date and time is 2007-08-30 11:53:26.
Connected Storage Devices:
Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address [0,0]
Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address [0,0]
Unidade de disco, Apple iPod USB Device, Bus Type USB
Universal Serial Bus Controllers:
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No IEEE 1394 Host Controller found.
Connected Device Information:
IPOD (H:\), iPod nano running firmware version 1.3.1
All green lights, and as you can see, according to iTunes, NO PROBLEM! Except that it won't recognize the iPod that the disgnistics says exists and reads... ?!?!?!
If anyone could shed some light on my situation, i would be VERY greatful!

My IPod Nano will charge when connected to my computer but it won't come up on My Computer or iTunes. So I can't update the songs. I've already tried reseting the iPod. Does anybody know what I can do to fix it.

I just downloaded the latest version of iTunes on my PC, Window 8 and now it won't recognize my iPhone 4. The device never shows in the menu bar

I just upgraded to 11.1.4.62 and now my iTunes won't recognize my iPhone 4. The device never shows in the menu bar

Hello there.
The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Adobe won't recognize that I uninstalled CS on old computer, won't let me activate on new computer

Adobe won't recognize that I uninstalled CS on my old computer, won't let me activate it on new computer.

Yes, uninstalling is not the same as deactivating. Call support to reset activations.
Mylenium

Please Help - My iTunes library won't recognize my iPod classic

My iTunes library won't recognize my iPod classic 80gb. I try doing the trouble shooting steps on apple, but they still did not work. Any help would be greatly appreciated. I'd love to add some newer music to my old iPod for listening in the car or when travelling. Thanks a lot.

Hello dmbnewfie,
Welcome to the Apple Support Communities!
I understand that your iPod classic is not being recognized in iTunes when you connect it to your computer. I know you have tried some troubleshooting on the Apple website as well, but without knowing which steps you have completed, I would suggest working through the attached iPod classic Troubleshooting Assistant.
Apple - Support - iPod - iPod classic Troubleshooting Assistant
Have a great day,
Joe

TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

Same question Wish someone had replied!
I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

Deskjet 3050 won't recognize wireless network anymore.

Product: HP Deskjet 3050
Operating system: Windows 7-64 bit
Printer quit printing wirelessly. Using the control panel on the printer, I restored defaults. Now it won't recognize any wireless networks. I have unplugged computer, but that didn't help. I don't want to unplug my router, because I will lost all my DVR items (we are on AT&T uverse). Any tips?

Run a Wireless Network Test from the Network menu of the front panel. What does it say?
If everything is OK (which I suspect), re-install the printer with the temporary use of a USB cable just as you did originally when you installed it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

STP Won't Recognize Edirol FA 101 Fireware Interface

Similar Messages

Maybe you are looking for