STP3 unable to open sample files in Ableton Live's library

Hi,
I have purchased some sample libraries that are installed under ~/Library/Application Support/Ableton/Library. These samples are .aif files, and I'm able to open them under Bias Peak and with any other application I've tried. I'm unable however to open them in Soundtrack Pro 3. It reports the following error: "An Unexpected Error CNSExceptionWrapper
type = 16777216, error = 0, message = Audio data format is not supported."
I notice when I look at the file info in Peak, it gives the compression type as 'able'. On the other hand, the file shows as 'raw' 16 bit AIFF below Peak's waveform display. So I tend to think it's just a PCM file, with an odd tag.
Has anyone else run into this? Is there any way I can coax STP3 into opening this file?
thx,
-Luddy

You might have to open them with Peak or the Loop Utility, do a save as, and use the resulting file. That's the only thing I can think of.

Similar Messages

Unable to open .xslm file in Excel from Document Library

When selecting edit on an Excel Macro file opens Excel Web App, with the warning 'Data validation', 'VBA Project', ... click Cancel and open it in Excel, but nothing in SharePoint will allow document to open in Excel.
Using the ribbon 'Edit Document' result in an error: We're sorry, we couldn't find a program to this document.
Ideas?
P.S.
Open Documents in Client Applications by Default is Active.

Let's eliminate the obvious:
Does the computer you are accessing the site with have Excel 2010 or 2013 installed?
Are you accessing the site using one of the
supported browsers: IE 8-11 (32-bit), Chrome (Latest), Firefox (Latest), Safari (Latest)?
Can you open other Office files (.xlsx, .docx, etc)?
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

ERROR: Unable to open TUXCONFIG file

Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PM

Hi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

Unable to open .xpj files

I have been working with Adobe (case #181204271) for over two weeks now to resolve this issue. I was wondering if anyone might be able to suggest some troubleshooting procedures. I have a compiled Flash Help file that I need to update for an upcoming release of our proprietary software. Two weeks ago, I was able to open the working xpj file although RoboHelp was very slow in responding when attempting to open topics for updating. Adobe advised me to replace the iWYSIWYG.dll file. This did resolve the issue with the slow response of the application and I was able to update my project successfully. Since that time, additional revisions are needed to the project before we publish the flash help file to our web server. I am no longer able to open the xpj file.
Not only am I unable to open the desired project, can’t I open the xpj file for all old projects and the sample project that comes with RoboHelp. I have been instructed by Adobe to uninstall the application and reinstall under a different user profile with administrative rights. In doing this, I received Active X error messages. i can notcreate a new project in RoboHelp 7 for HTML either. I was advised by Adobe to deleted the xpj and cpd files and try to edit the hhp file. I am also unable to open the hhp file. Any suggestions are greatly appreciated! Thank you!

Thanks for your suggestions. I only found one patch to apply:
Adobe RoboHelp 7.0.1 - English, French, German, and Japanese
REgarding item 40 on your Snippets, when I atempt to open RoboHelp for Word, I get an error mesage that reads RoboHElp explorer is unable to start Word. I have uninstalled RoboHelp X5 and the upgrade to RoboHelp 7 and reinstalled both. Also had IT provide me with a new profile. Unfortunately, these steps did not resolve the issue of being unable to open xpj files.
Yes, Clownfish project and the project I am attempting to open are on my local drive not on a network drive.
When trying to open the hhp file, I get the following error message:
error message when uninstalling and reinstalling and trying to create a new project:
error when deleted xpj and cpd files and attempting to edit the hhp file

Pro*C/C++ generates error "PCC-S-02015, unable to open include file"

I'm running a .pc file through the pre-compiler (on Windows 7x64 with instant client 12.1) and get the following error:
Error at line 78, column 1 in file XXX.pc
EXEC SQL INCLUDE SQLCA;
1
PCC-S-02015, unable to open include file
If I change the content of my file to the following
#include "sqlca.h"
//EXEC SQL INCLUDE SQLCA;
the pre-compiler does it's job nicely.
My pcscfg.cfg looks like this:
include="C:\PROGRA~2\Oracle\INSTAN~1\sdk\include"
include="C:\PROGRA~2\MICROS~2.0\VC\include"
define=(WIN32_LEAN_AND_MEAN)
DEFINE=_WSTDIO_DEFINED
Has there been a change in the syntax of Pro*C or why can't it resolve the EXEC SQL INCLUDE?
PS: I'm an absolute newbie to this and am trying to get to compile some veeery old code, build under instant client 9/10/11)

Karl Esau (guest) wrote:
: Hi,
: I have problems to get the precompiler running - executing the
: precompiler leads to a segfault.
I meanwhile solved the problem, so that I can compile and
run the samples.
a strace on 'proc' showed:
open("/oracle/precomp/public/SQLCA.H", O_RDONLY) = -1 ENOENT
(Nosuch file or directory)
I made a symbolic link for an upper case SQLCA.H, needed to add
SQLCHECK=SEMANTICS in ~/precomp/admin/pcscfg.cfg and one more
lib for the make: /lib/libdl.so.2 because 'dlclose' and other
symbols were undefined.
bye
Karl Esau
null

SegFault PCC-S-02015 unable to open include file

Hi,
I have problems to get the precompiler running - executing the
precompiler leads to a segfault.
btw: don3t have ORACLE_HOME/precomp/demo/proc
oracle@los13529 > make -f demo_plsql.mk examp9
sqlplus scott/tiger @exampbld </dev/null
System default option values taken from:
/oracle/precomp/admin/pcscfg.cfg
Error at line 53, column 1 in file examp9.pc
EXEC SQL INCLUDE SQLCA;
1
PCC-S-02015, unable to open include file
make[1]: *** [examp9.o] Segmentation fault
make[1]: Leaving directory `/oracle/plsql/demo'
make: *** [examp9] Error 2
a 'strace' says:
oracle@los13529:/oracle/plsql/demo > strace proc examp9
open(ptrace: umoven: Input/output error
0x85a7dc0, O_RDONLY) = -1 ENOENT (No such file or directory)
i have to admit, i had to change /oracle/precomp/admin/pcscfg.cfg
as follows and set two links in order to fix include errors on
stdarg.h and stddef.h:
/oracle/precomp/admin/pcscfg.cfg:
sys_include=(/usr/include)
include=(/oracle/precomp/public)
include=/oracle/precomp/hdrs
include=/oracle/tpcc2x_2/src
include=/oracle/precomp/include
include=/oracle/oracore/include
include=/oracle/oracore/public
include=/oracle/rdbms/include
include=/oracle/rdbms/public
include=/oracle/rdbms/demo
include=/oracle/nlsrtl/include
include=/oracle/nlsrtl/public
include=/oracle/network_src/include
include=/oracle/network_src/public
include=/oracle/network/include
include=/oracle/network/public
include=/oracle/plsql/public
ltype=short
oracle@los13529 > l /usr/include/std[ad]*
lrwxrwxrwx 1 root root 57 Mar 15 10:18 /usr/include/stdarg.h
-> /usr/lib/gcc-lib/i486-linux/egcs-2.91.60/include/stdarg.h
lrwxrwxrwx 1 root root 57 Mar 15 10:18 /usr/include/stddef.h
-> /usr/lib/gcc-lib/i486-linux/egcs-2.91.60/include/stddef.h
system related info:
oracle@los13529:/oracle/plsql/demo > uname -a
Linux los13529 2.2.3 #1 Wed Mar 10 14:54:34 MET 1999 i586
unknown
oracle@los13529:/oracle/plsql/demo > cc --version
egcs-2.91.60
path/environment-settings seem to be proper:
johndoe@los13529:/home/johndoe > set|grep orac
LD_LIBRARY_PATH=:/oracle/lib
ORACLE_BASE=/oracle
ORACLE_HOME=/oracle
ORACLE_PATH=/oracle/sqlplus
ORA_NLS32=/oracle/ocommon/nls/admin/data
ORA_NLS33=/oracle/ocommon/nls/admin/data
PATH=/oracle/bin:/oracle/buildtools/bin:/usr/local/bin:/usr/bin:
/usr/X11R6/bin:/bin:/usr/games/bin:/usr/games:/opt/kde/bin:.
TNS_ADMIN=/oracle/network/admin
ora/listener-connect is OK, even ODBC from a W95-client works:
johndoe@los13529:/home/johndoe > sqlplus scott/tiger@quad
SQL*Plus: Release 8.0.5.0.0 - Production on Mon Mar 15
14:8:18 ...
SQL> select count(*) from tab;
COUNT(*)
17
SQL> exit
Disconnected from Oracle8 Release 8.0.5.0.0 - Production
PL/SQL Release 8.0.5.0.0 - Production
please give me a hint. mailto:[email protected]
null

Karl Esau (guest) wrote:
: Hi,
: I have problems to get the precompiler running - executing the
: precompiler leads to a segfault.
I meanwhile solved the problem, so that I can compile and
run the samples.
a strace on 'proc' showed:
open("/oracle/precomp/public/SQLCA.H", O_RDONLY) = -1 ENOENT
(Nosuch file or directory)
I made a symbolic link for an upper case SQLCA.H, needed to add
SQLCHECK=SEMANTICS in ~/precomp/admin/pcscfg.cfg and one more
lib for the make: /lib/libdl.so.2 because 'dlclose' and other
symbols were undefined.
bye
Karl Esau
null

PCC-S-02015, unable to open include file(gnu/stubs-32.h)

Hi,
I was trying to precompile one of the sample files from the "Pro*C/C++ Precompiler
Programmer’s Guide" and I got this error message:
Fehler in Zeile 7, Spalte 11, in Datei /usr/include/gnu/stubs.h
# include <gnu/stubs-32.h>
..........1
PCC-S-02015, Einfügedatei konnte nicht geöffnet werden.
(Which means "unable to open include file")
I couldn't find any an answer on the forum, so I figured it out for myself.
I just wanted to post it so in case somebody else faces the same problem, they would have the solution here.
The machine is a virtual Linux host running on a 64Bit architecture, so I was surprised why is it looking for stubs-32.h and not stubs-64.h.
The answer is in the stubs.h file:
#include <bits/wordsize.h>
#if __WORDSIZE == 32
# include <gnu/stubs-32.h>
#elif __WORDSIZE == 64
# include <gnu/stubs-64.h>
#else
# error "unexpected value for __WORDSIZE macro"
#endifSo let's check the bits/wordsize.h file:
#if defined __x86_64__
# define __WORDSIZE     64
# define __WORDSIZE_COMPAT32    1
#else
# define __WORDSIZE     32
#endifSo I figured out you can define __x86_64__ in two places:
The file: precomp/admin/pcscfg.cfg
Most probably you just need to add define=__x86_64__ and that should do the trick.
Unfortunately I couldn't try it because I didn't have write permission on that file.
The other way is to pass it in the command line:
proc sample1.pc MODE=ORACLE DEFINE=__x86_64__+
This way the precompiler created the output .c file without errors.
Cheers
PS: Don't try to define the __x86_64__ in the .pc file, or you'll get a warning when you compile the .c file. Not a big deal, just desn't look good :-D
Edited by: VincentFreeman on Feb 12, 2009 4:09 AM
Edited by: VincentFreeman on Feb 12, 2009 4:16 AM

Ideally speaking your pcscfg.cfg should have the paths to the directories where you will be getting all your headers from
Based on what linux flavor & version of gcc you have the following directory will have the headers you are missing
/usr/lib/gcc/ABC-XYZ-linux/<gcc_version_no>/include
where ABC could be i386/i586 depending on the hardware and XYZ could be the linux flavor like redhat/suse/whatever you have

Unable to open mxml files since 4.7

Ever since I upgraded to Flash builder 4.7 I have been unable to open mxml files for editing.
These files in question are in an app that references a lot of other libs in the same project.
.as files open fine.
I get no error, it just hangs.
I only updated today and now am unable to do any work. Anything I can turn off or do to get this thing working?

I was having the same problem and was able to create a simple use case for reproducing. I believe the Flash Builder is getting stuck in an infinite loop when components are structured in a specific way.
For my example I created a new application and two components that extend group ParentGroup and ChildGroup. The ParentGroup and ChildGroup each had a public member variable of type Object and had a [Bindable] metadata tag, name thing1 and thing2 respectively.
1. I added a ParentGroup instance to the Application.
2. I added a ChildGroup instance as a child element in the ParentGroup and set the thing2 property on the ChildGroup instance to the thing1 property of the ParentGroup.
3. I added a ParentGroup instance as a child element in the ChildGroup and set the thing1 property of the ParentGroup instanct to the thing2 property of the ChildGroup.
If I closed the project and then reopen it, I can no longer open any MXML files. As soon as I comment out the setting of the thing1 property in the ChildGroup's ParentGroup instance all is well.
Of course in practice this would never make sense, so I actually took it a step further and created a SampleVO object that had an ancestor member variable of type SampleVO. This simulates a simple parent child relationship. I updated the Object member variables thing1 and thing2 to be SampleVO objects instead. I also updated the thing1 attribute that was getting set in ChildGroup's ParentGroup to be thing2.ancestor. This is a bit more realistic as it is something we actually do in our real project.
I am going to attach the FXP to https://bugs.adobe.com/jira/browse/FB-35854
Keegan
EDIT: The Jira system seems to no longer be relevant with the move to Apache Flex. Here is a link to my sample project: http://dl.dropbox.com/u/4584717/MyTest.fxp

I am unable to open raw files from my Canon T1i in Adobe Camera Raw of my version CS3 of Photoshop. I have tried to update my ACR by downloading version 4.6 from the Adobe website but I am still unable to open raw files, just JPEG. Is there a way to use

I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize these files. I tried to update my Adobe Camera Raw by downloading version 4.6 from the Adobe Website, but when I clicked on the plus-in, I got another message that Photoshop does not recognize this file. I spoke with a representative from Canon who said that I could not update CS3 and that I should subscribe to the Cloud. I would prefer to use my CS3, if possible. Can anyone advise me what to do?

The T1i was first supported by Camera Raw 5.4 which is only compatible with CS4 and later
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all T1i Raw files to DNGs then edit the DNGs in CS3
Camera raw, DNG | Adobe Photoshop CC

ERROR: Unable to open structapps file!

Hello,
Having modified the structapps.fm in FM10, I am getting the following error within a dialog when attempting to use the same file in FM8:
ERROR: Unable to open structapps file! FA_errno -43
Is FM not backward compatible ? OR do I need to reread the file in FM8
Thanks

The file should be saved in the FM version that you're using it in. You can't use any newer FM version file in any older version of FM, e.g. FM8 can't open any FM10 files (except for the MIF formats).

ZAV 10 - Unable to open parameter file error

When trying to launch a ZAV 10 app, C-Cure Administration Console, users are getting an error "**Unable to open parameter file cc800cl.pf, errno 2. (1247)". This only appears to be happening on Win7. This did work when first created, but after a few weeks the error has started to pop-up.

If this was working and is not now, and you are certain nothing has changed on the client systems (or at least nothing that could interfere here), then this might be an issue with the license used when building the application. What is the expiry date of your license and was it applied prior to building this exe?
If this isn't expiring please open an SR for this issue, if you can. This is the information the support team will require:
- Copies of any warnings or errors around the time the issue occurs (or a copy of the application and system event logs, in .evtx format)
- A copy of the exe you are using
- If you can build the exe again as a diagnostic-mode executable and provide the diagnostics generated when attempting to run, that can be very helpful
- It may also be required that you send installation media for the application and your build process, so the team can attempt to reproduce the issue in-house
- You will also typically be asked for the .xappl file and associated Files folder, if reproducing in-house is required. This will become absolutely necessary if a ticket needs to be filed with Spoon, so sending it ahead of time is a good idea

"Unable to open config file" Error when starting tomcat

hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

I have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

"Unable to open project file" Error Message

I pulled an all-nighter (13 hours of editing) last night to create a critical project in FCE 3.5.1 on my Intel iMac running 10.4.11 then left this afternoon for a few hours and shut down my machine. Came back tonight and tried to open the project (which I saved on my Maxtor 1 TB external drive along with all of the scratch disk files). To my absolute panic, it won't open the file now with an error message that simply says, "Unable to open project file". HELP!!!! Anyone have any suggestions?!?!

In the past I found (and reported to Apple Feedback) the same bug Steve reports here, but I should recall that the problem:
- only appeared in PAL projects (probably not the case for kscritch) - never heard of it in NTSC
- was consistent in FCE 3.x, not so in FCE 4
I made tests importing .psd images with transparency into PAL projects using FCE 4, and I had various behaviours: sometimes the project worked, sometimes I couldn't open the project again (as in FCE 3), sometimes I had error messages with inconsistent behaviour (msg like "file error", but the project opened and file was there...), etc. so I decided to do without.
Now I only import .tif or .png images when I need transparency
Piero

Unable to open pst file error details access to the path is denied

Hello,
iam trying to do a mailboximport-request from a QNAP-nas that is member of the domain.
When doing the mailboximport i am getting the following error : unable to open pst file error details access to the path is denied.
Which permissions do i need to have on the folder/file on the qnap to import the .pst-file?
Thx

Move your PST files to a windows server. Exchange Trusted Subsystem is a universal group in Active Directory.
Read more here: http://technet.microsoft.com/en-us/library/ee633455(v=exchg.141).aspx#Pre
Mike Crowley | MVP
My Blog --
Planet Technologies

STP3 unable to open sample files in Ableton Live's library

Similar Messages

Maybe you are looking for