STPO's  -- load date , goods issue, transport is not appear

Hi Guru's
I'm received one case, while creating the STPO's (Different company codes) in items details -> Del.sch-> transport, load date and goods issue is not appear. The Delivery date is 25.02.2008.  next day the user as change the del.date from 25th to 26th.  transport,load date and goods issue is appear.
Anybody plz tell me how its happen like this, and tell the root cause.
Regards
chandru.

Hi Nilima,
When running off RSA3, it will use a dialog process while when called from the PC it will be using a background process.  Check the 'abap/time' setting in rz11.
Moreover, if it took only two hours to process last month, it is improbable that data has increased to such a large extent in a month's time.
It is possible that new jobs have been added on the R/3 side that runs at this time.
It may be a good idea to try and run this Process Chain when the R/3 system is lightly loaded. 
Discuss this with the Basis Team.
Best Luck!
Mathew.

Similar Messages

  • In Stpo transport, load and goods issue line is not appear

    Hi MM Expert's
    I am creating the STPO's (Different company codes) in items details -> Del.sch-> transport, load date and goods issue is not appear. The Delivery date is 25.02.2008. next day the user as change the del.date from 25th to 26th. transport,load date and goods issue is appear.
    Anybody plz tell me how its happen like this, and tell the root cause.
    Regards
    chandru.

    hi
    shipping point calendar and route calendar must be equal here.
    but
    i dont know why these are different here.
    because it is overtaking or superseeding the shipping calendar here.
    make the shipping point and route calendar in sync with each other.
    test and confirm
    balajia

  • Why the delivery date is the same date as 'transptn plan date" & loading date' & ' good issue' & GR end date'

    Hi Experts,
    why the delivery date is the same date as ‘transptn plan date” & loading date’ & ‘ good issue’ & GR end date’.
    in shipping tab i can see Planned Deliv. Time  170 Days ... wat could be the reason.
    Many Thanks:
    Raj Kashyap

    Hi Jurgen,,
    Thanks for quick reply!!
    But i didnot find any things like that .. what could be the customizing .. and we are using GATP from APO side.
    \Raj Kashyap

  • CO-PA for good issue documents are not created

    Dear All
    We are using both account & cost based CO-PA , actually the problem is this that when we are doing the sales cycle, after billing my CO-PA document created  but the same when I do delivery COGS document not created  ,actually for sales I am taking the sales data from condition type(assignment of condition type to CO-PA value filed) and for COGS , I have assigned the COGS  GL accounts in TRANSACTION Code OKB9 (automatic determine the profitability segment) also the same GL accounts I have assigned  with value field in
    Assignment PA transfer structure
    Now when I am doing sales cycle , CO-PA document has been created when I am doing billing but when I am doing Good issue , CO-PA not created  but if I go and check the GL account of  COGS account I found the all detail of my profitability segment which hit this GL account
    Please help in this regard.
    Regards
    Kashif

    I assume that problem relates to billing in make-to-stock scenario. Since COPA document is automatically created with billing. Please note the following -
    1. COGS GL account is not created as cost element.
    2. There is no CO / COPA document at the time of delivery.
    3. Condition type ‘VPRS’ should exist in SD pricing. It is updated form material master.
    4. Condition type ‘VPRS’ should be assigned to COPA value field (just like PR00 / price).
    5. Revenue and COGS value fields are updated at the time of billing.
    Hope it clarifies.
    Regards,

  • Goods issue form is not opening

    Hello Experts,
    With one of my user, Good issue form is not opening. As he has got full Authorizations for Goods Issue, when we click the Goods issue option, something happens but then FORM  does not  appear.
    Help Required
    Thanks

    Hi Shazad,
    After login with the affected user
    1. Open any document like sales order
    2. Now select the Goods Issue option
    3. Go to Window -> Cascade
    Regards,
    Vijay kumar
    SAP Business One Forums Team

  • Good issue from delivery not possible due to credit block

    Hi gurus,
    Please help me on this issue.while doing PGI for the delivery i am getting the following error message."Good issue from delivery not possible due to credit block "The simple credit check is assigned for the sales document type.iam doing free of charge delivery.
    What are all the possible ways to get such error
    Regards
    Vis

    but system behavior is not set in transaction OVA8, means combination of risk categories and 03 is not set.
    I think you are checking the wrong risk category, please check once again the Risk category of the payer in FD32, what is it assigned and also check OVA8 with this risk category.
    If you find the above settings are correct as per your observation, try to create a fresh cycle so that you will get the correct results as per your settings in delivery.
    In your case what you are saying is correct, may be the risk category is changed recently this you can check the change log of the payer customer in FD32( if any change takes place).
    If possible try to past the screen shot of both.
    thanks,
    srinu.

  • I am subscribed to iCal Jewish Calendar but the dates of holidays etc. do not appear on the calendar. They used to, but now there is nothing. What can I do to make the festivals show again?

    I am subscribed to iCal Jewish Calendar but the dates of holidays etc. do not appear on the calendar. They used to, but now there is nothing. What can I do to make the festivals show again?

    jd,
    Instead of using the Apple supplied Jewish Holiday Calendar, try http://www.hebcal.com/ical/

  • My ipod touch was put to load without battery but it does not appear is loading or not What do I do?

    my ipod touch was put to load without battery but it does not appear is loading or not What do I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • STPO's --- load date is not appearing in the item detail

    Hi SAP Expert's,
    We have a issue with inter company STPO, the Qty of mtrl is80 Kg. we received 10 kg on 1st feb.
    In item detail --Delivery schedule tab it showing the delivery date is 1st feb and goods issue is 5 th feb.
    Same like they delivery 10 kg .Delivery date is 25th feb,but the system not showing the  Transport date, load date and goods issue date. Mtrl availablity date is past date of delivery date (1st feb).
    When we change the delivery date 26 th feb. the system showing the transport date, load date and goods issue date. Now the mtrl availablity date is 25th feb.
    Please any one can clarify my doubt. Why the system is not showing the transport date, load date, and goods issue date.
    Please tell me that where its from the  system picks these dates..
    Thanks in Advance.
    Thanks and Regards
    Chandru.

    Hi Venkatesh,
    Check the condition record in transaction NACE. Whether the print output field is present in the condition record.
    Regards,
    Gajendra.

  • Billing Document and Material Document number and Date (Goods Issue)

    Dear Experts,
    Is there a way I can find the relationship between a billing document and a material document number and Goods issue date?
    Thanks

    Hi Abid
    Is there a way I can find the relationship between a billing document and a material document number and Goods issue date?
    You have to follow the flow from the billing document to the material document. This will only work if the billing document comes from a delivery note.
    Billing document => Delivery
    LIPS-VBELN = VBRP-VGBEL
    and LIPS-POSNR-VBRP-VGPOS
    So you have LIPS + LIKP with the LIKP-WADAT_IST as the goods issue date.
    Delivery => Material Document Number
    You can use the table VBFA with the delivery item as the preceding document number (VBFA-VBELV) and item (VBFA-POSNV) ; you will also have to define the preceding document type as J (delivery) and the document category of subsequent document as R (material document).
    Because in SAP nothing is simple, there might more than one material document, because the goods issue (601) movement might have been canceled and issue again. So you will have to decide what to do in that case.
    Best Regards,
    Franck

  • Different Request Delivery Date & Goods Issue Date

    Hi SD Experts,
    Please find my queries as below:
    1. How do i configure the system to propose delivery date as today's date? Currently the system now always propose tomorrow's date but i want it to be today's date. Assuming today is 21st December but the system is always giving 22nd December. Anything that can be done inside SPRO? Inside VOV8 i just tick 'Propose Delivery Date' but i left the box empty for 'Lead time in days'
    2. Assuming today is 21st December, and i created a SO. The goods issue date is always tomorrow's date as well which is 22nd December. I want the goods issue date to follow 'Request Delivery Date'
    3. In conclusion, why is 'Request Delivery Date' is always tomorrow's date?
    Anything that can be done? Please help
    Thanks!
    Regards,
    LEE
    Edited by: YEOW LENG LEE on Dec 21, 2008 12:10 PM

    Hi lee
    A request delivery date comes if you maintain the lead time in days in VOV8 , GR time , In-house production time RLT in days in MMR , based on that the you will get the requested  delivery date If you keep the fields blank  then you will get the request delivery date as todays date only but if you have assigned factory calendar in shipping point and if you create sales order on Saturday (19/12/2008) then the delivery date will be on Monday i.e., 22/12/2008.
    Now if you want the goods issue date as different date then the delivery date should be different ,if you fill any one feild and check then you will get the different goods issue date
    Coming finally you are getting a request delivery date as tomorrow's date because of the factory calendar you have assigned to shipping point and to the CMR
    Regards
    Srinath

  • SQL LOADER DATA INSERT ISSUES

    I tried inserting data into an empty table in my database but got the following error:
    SQL*Loader: Release 11.1.0.6.0 - Production on Tue Jul 7 22:01:35 2009
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    SQL*Loader-350: Syntax error at line 7.
    Expecting "," or ")", found "VARCHAR2".
    countryname VARCHAR2(25),
    ^
    What is wrong what this please? Find below the contents of .CTL and .DAT files.
    Content of load_country.CTL
    LOAD DATA
    infile '/D:/Data/Load/load_country.dat'
    INTO TABLE ASSET.COUNTRY
    INSERT
    FIELDS TERMINATED BY ';'
    (countrycode,
    countryname VARCHAR2(25),
    population NUMBER(10))
    The content of the load_country.DAT file:
    BEN;Benin;8791832
    BFA;Burkina Faso;15746232
    CPV;Cape Verde;503000
    Thank you.
    Ofonime Essien.

    Hello,
    After solving the Varchar2 problem, I received this error for the NUMBER data type:
    SQL*Loader: Release 11.1.0.6.0 - Production on Wed Jul 8 11:47:16 2009
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    SQL*Loader-350: Syntax error at line 8.
    Expecting "," or ")", found "number".
    population number(10))
    ^
    I replaced the Number data type with Float but received this error:
    SQL*Loader: Release 11.1.0.6.0 - Production on Wed Jul 8 11:52:27 2009
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    SQL*Loader-350: Syntax error at line 8.
    Expecting valid column specification, "," or ")", found "(".
    population Float(10))
    ^
    Replacing Number data type with Integer, I received this error:
    SQL*Loader: Release 11.1.0.6.0 - Production on Wed Jul 8 12:17:11 2009
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    Control File: D:\Data\Load\tsl.CTL
    Data File: D:\Data\Load\c.dat
    Bad File: D:\Data\Load\c.bad
    Discard File: none specified
    (Allow all discards)
    Number to load: ALL
    Number to skip: 0
    Errors allowed: 50
    Bind array: 64 rows, maximum of 256000 bytes
    Continuation: none specified
    Path used: Conventional
    Table C, loaded from every logical record.
    Insert option in effect for this table: INSERT
    Column Name Position Len Term Encl Datatype
    COUNTRYCODE FIRST * ; CHARACTER
    COUNTRYNAME NEXT 27 VARCHAR
    POPULATION NEXT 10 INTEGER
    SQL*Loader-941: Error during describe of table C
    ORA-04043: object C does not exist
    Thank you so much.
    Ofonime.
    Edited by: ofonime on Jul 8, 2009 7:09 PM

  • Hyperion Planning Loading Data refreshment issue

    Hi All,
    I have use load data utility and it will load meta data in to planning application and for effect the same in Essbase
    need to refresh the application using manage data base i don't want to refresh the data base
    want i exactly i want to do is once my meta data or data change in staging area i run the load data utility
    and it will affect on Planning as well as Essbase at the same time.
    please suggest can it posible without refreshing or any other way to do this..
    i don't want to refresh manually it would be a problem it should be automated.
    Thanks
    Pramod

    Hi There,
    I fear that the utility(we're talking about) supports only- flat files.
    If I'm correct, you may've to extract the data from staging area & master tables in a format conducive to the Planning app. dimensions & then invoke your batch file that calls OutlineLoad utility. Obivously, OutlineLoad utility will look for the latest extracted files before each run.
    If you've ODI, you can build a simple interface & then a package to automate this for you. This avoids dealing with extraction layer in your architecture.
    - Natesh
    P.S.:- I wish John Goodwin corrects me, if I'm wrong :)

  • Error during goods issue-Posting period not open

    Hi ,
    I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
    Thanks,
    Hari.

    Hi,
    Goods issue takes place, say on a given date and this should be updated, so that the plant valuation changes are recorded. But the periods need to opened to do this. Normally there are two posting periods available, one is in MM, done by t.code MMPV and the other in FI, t.code is OB52.
    So, in MMPV we need have the current month as the posting period. But in your case it was allowing, probably because you have marked the indicator " allow posting in previous period " in MMRV t.code as our friend just conveyed.
    Hope it helps. Please reward if useful.
    Thanks & Regards
    Sadhu Kishore

  • "iTunes unable to load data class" and "iTunes could not back up"

    Hello all.
    I had an issue and I also have found a work around - but will be glad if this issue will be fixed.
    The issue started only in 2013, in Israel.
    I get two messages.
    When connecting the iPhone to the computer (PC) I get the following message: "iTunes unable to load data class information from sync service". When I sync or try backup (I back up to the computer), I get the following message: "iTunes could not back up the iPhone....because the back up session faild". Backup does not succeed (but sync does).
    After many trials I got the following solution:
    When I change my time zone from Jerusalem to Cairo (same time zone) backaup is working fine. Moreover - even if I stay in Jerusalem's time zone but check off the "automatic adjust clockfor daylight saving time" - it works fine. The only time I have fault is when I am in Jerusalem time zone with "automatic adjust clockfor daylight saving time" checked ON.
    So that's the story.
    Any comment, or chance of a fix (the workaround is simple, so maybe this will help other people as well)
    Regards,
    Eyal

    One more elaboration - when I update the timezone - I mean - on the computer (not on the iPhone).
    BTW - I think this is connected to the fact that in Israel the daylaight saving time period is not constant
    BR
    Eyal

Maybe you are looking for