STPPOD.DELVRY03 idoc not getting generated

Dear Experts,
I have done the following settings for STPPOD.DELVRY03 but still idoc is not getting generated when i am posting goods reciept using VL32N
1) For Confirmation control key selected A-Always POD Relevant
2) For Item category ELN POD Relevant X and POD Automatic
SAP->Customizing Implementation Guide -> LogisticsExecution ->Shipping
->Deliveries ->Proof of Delivery ->Set POD-Relevance Depending on
Delivery Item Category
3) In Vendor Master the field "POD-Relevant" is assigned the value "A".
   4) In NACE settings
          Application:E1
          condition records & output type:OPOD
          Delivery type:EL
          Function:LS
4) In pratner profile
              Partner Type-->LS
              Partner Role --> blank)
               Message Type-->STPPOD
               Basic Type ->DELVRY03
              and under message control
              Application->E1
              Message Type
              Process code-->OPOD
Please suggest me if I am missing out on someting.
Thanks
Gaurav Gupta

Hi Gaurav,
Typically for STPPOD Idocs, the NACE and WE20 Settings are maintained at Vendor Level. Try changing your settings and see if it works.
Refer this link for further details : Re: STPPOD triggered sending wrong material from SAP to SNC
Thanks,
Bharath

Similar Messages

Inbound IDoc not getting generated in XI System

Hi all,
I have created a scenario following the given weblog:
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
The first half of this scenario is working fine and the idoc data is getting posted into the the oracle table successfully.
The business process is successfully sending the acknowledgement IDOC 'ALEAUD' to the XI server using an HTTP Receiver Channel.
The problem is that no inbound IDOC can be seen in the XI system using tcode we05.
Next the xi system has to send the same IDoc to the R/3 system. But as no IDoc is getting generated in XI, nothing gets sent to R/3.
Can anyone suggest what could be the possible error.
Pls help.
Regards,
Neetu

Hi,
You will not see that IDOC in WE05 of the XI system. You can see that only in SXMB_MONI. XI system will not store any IDOC. When it enters XI it is a XML message and it will not post any IDOC that you can see in WE05.
If you need to send the IDOC back to R/3 system, you can use BPM and send back the IDOC to R/3. If you need few details from Oracle tables that is to be sent back to R/3 then get those values from Oracle tables and fill in the same IDOC and send it back to R/3.
Try this and let me know.
Thanks,
Prakash

CRMXIF_ORDER_SAVE IDOC not getting generated for BUS_TRANS_MSG BDOC

Hello Experts,
In our project, we have a requirement to send custom fields in the BUS_TRANS_MSG to external system through XIF. The model of BDOC BUS_TRANS_MSG triggering IDOC CRMXIF_ORDER_SAVE_M02 perfectly worked in the development system. We wanted to try the custom field extension in the Sandbox. So as per OSS note 916093, we have extended E101_CRMXIF_CUSTOMER_H segments with custom fields and tried generating the interfaces in BDFG transaction. While generation with IDOC CRMXIF_ORDER_SAVE_M we got an error message "Incompatible change to complex data type
type E101CRMXIF_ISU_PRA1_X". So went about creating a custom IDOC ZZ_CRMXIF_ORDER_SAVE_M02 for message CRMXIF_ORDER_SAVE. Even for this config, the IDOC is not getting generated for the BDOCs. Lastly, configured the IDOC ZZ_CRMXIF_ORDER_SAVE_M02 to a custom function module ZZ_BDFG_IDOC_TEST_FM. The FM got generated and activated, even then the IDOC is not generated for the BDOC.
SMOEAC config in Sandbox looks the same as the Development system. We do not the reason why IDOC is not getting generated and also the reason for error in BDFG while generating the interfaces after adding custom fields to CUSTOMER_H segment.
Any help would be appreciated.
Thanks,
Partha

Hi Partha,
Kindly check the following thread.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f?QuickLink=index&overridelayout=true
XIF adapter
Hope it answers your Query
Regards,
Srikanth.Naga

Delivery IDOC not getting generated

Hi All,
I have created an outbound delivery IDOC. The process is that the idoc should be trigerred as soon as the delivery is created/changed or deleted. I am having an issue. The idoc is getting trigerred as soon as the delivery is getting created but not in the case of the delivery change.
I am not able to get the probable reason for that. Please let me know the probable reasons for that and where can i check that.
Regards,
Sharadendu

Hi Sharadendu,
For this you have to use Change pointers concept.
see the explanation below
System will remeber every change for a table related to an IDOC. eg. if costcenters are changes. tables csck and cskt will change. Having a change pointer for IDOC type cosmas which reflects costcenters. Any change made by using the KS* transactions will now be recorded. Usinf the change pointers you can now generate IDOCS so that the changes are sent to the dependant systems.
use bd50 to acivate change pointers, use bd21 to generate idocs, use bd64 to determine the distribution of those idocs.
PLs. reward if useful.....
cheers,
Hema.

When executing t.code VL03N then IDOC not getting generated

I have a issue in upgarde project as below;
Go to transaction VL03N
     -Enter Outbound Delivery number
     -Click on document flow
     -Select Goods issue material document and click on Display Document
     -Material document is displayed.
     -Then go to: System -> Services for Object
     -Click on display Relationship
     -IDOC number must be displayed.
But Idoc not generated, here only material documets are displaying, pleass let me know what is the error.
Thanks in advance,
Vishwanath

Hi,
IDOCs will not be triggered in VL03N. IDOCs will be triggered in either VL02N or VL01N based on the output type maintained (if you are triggering idoc based on Message control).
Regards
Vinod

IDOC not getting genrated

Hi Experts,
Need your help.
In idoc creation, I have changed material description, its generating master idoc but communication idoc not getting generated.
Please suggest me the solution,
Regards,
Rachna

Hi,
Idoc's are generated based on the payment method and any how in the payment method we will give the required curriencies which are applicable for that payment method.
And u had mentioned as WE05 for IDOC list, but actually the T.Code for IDOC list is WE02.
Check the settings, it has to come. Reply back for more clarifications.
regards
srikanth.

BATMAS IDocs not gettting generated using Change Pointers

Hi,
I have scenario where I am supposed to replicate Batch between R/3 & Ware House Systems. So, for this I am using the standard BAPI to generate IDocs correctly for the batch.
Now, when I go and change the document flow i.e. make changes to the Batch using transaction MSC2N and saving a new document is getting generated.
Change Pointers are active globally and also on the message type. Now when I use the transaction BD21 to generate IDocs, they are getting created successfully for the distribution model that is existing. Now, when I add a filter in my distribution model based on Plant IDocs are not getting generated.
Can any one let me know if I missed out any configuration step or else what needs to be done in order to solve this issue.
Raghuram.

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

IDOC not getting triggered

Im triggering an idoc IDOC_OUTPUT_ORDERS immediately when i create/change the PO
However the idoc is getting generated when i change only certain fields.
When i change other fields it does not get triggered.
Why?
-Dexter

Hi Dexter,
I hope these links might be useful to you.. refer all the links, you will get it..
Idocs trigering
Idocs Triggering!
regarding Idoc triggering
Idoc triggering
Regards,
Ahamed.

F9N1 - Inbound FINSTA not getting generated

Hi,
When I execute F9N1, internal FINSTA are not getting generated..
The application log shows current Accounts being edited by end of day processing run
What could be wrong and what can be done? Any idea..
The next date in F9K3- Current Account is 11.02.2010
The F9N1 run date is 12.03.2010
The F9B1 date - Current date is 12.03.2010
New posting date - 15.03.2010
I am in Development server and trying to add a new company code to the IHC set up. Where can I look into? The internal FINSTA are not getting generated..
Regards,
SAPFICO
Edited by: SAPFICO on Mar 12, 2010 11:25 AM

Ravi,
I found the problem.
Let me explain the whole process for the benefit of other consultants like me.
Pre-requisites for generating FINSTA IDOC for any account in IHC:
1. In the account (F9K2 - change account) go to 'Account Statements' TAB and ensure that the 'Next date' is the date on which you are trying to create the bank statement.
2. In WE20 you should have created a partner profile for the Business Partner (Partner type GP) who is the Account holder.
3. In this partner profile for the BP there should be a Outbound parameter for FINSTA (without Message code IHC and Message function FI) with basic type FINSTA01. The port used for this Outbound Parameter should be LOCAL.
4. For the same BP there should be a Inbound parameter for FINSTA with port and this port should be your client where the subsidiary's company code resides.
Now when you run F9N1, it will create two FINSTA IDOC's, one with LOCAL as port and for this the Partner will be your BP who holds the account in the IHC.
Another FINSTA IDOC will have the House Bank as partner. This IDOC will be succesful only if you have created the account as a House Bank and Account ID in FI12 configuration for the subsidiary company code.
Hope I have made myself clear.
Kalyan

Spool not getting generated in OO ALV report

Hi,
I developed a report in which we are giving output in same selection screen through OO ALV.
But,when we are scheduling that report in background,spool is not getting generated.
Waiting for your reply.
BR,
Praveen

Hi Aparna,
I tried NEW-PAGE PRINT ON.
I am pasting source code extract below:
   IMPORT DATA = ME->IT_FINAL2 FROM MEMORY ID SY-CPROG.
    FREE MEMORY ID SY-CPROG.
    CHECK ME->IT_FINAL2 IS NOT INITIAL.
    CHECK LO_DOCK IS INITIAL.
    CREATE OBJECT LO_DOCK
      EXPORTING
        REPID = SY-REPID
        DYNNR = SY-DYNNR
        RATIO = 70
        SIDE = CL_GUI_DOCKING_CONTAINER=>DOCK_AT_BOTTOM
        NAME = 'DOCK_CONT'.
    IF SY-SUBRC NE 0.
      MESSAGE 'Error in Docking Control' TYPE 'S'.
    ENDIF.
    IF LO_ALV IS INITIAL.
      TRY.
          LO_CONT ?= LO_DOCK.
          CALL METHOD CL_SALV_TABLE=>FACTORY
            EXPORTING
              LIST_DISPLAY   = IF_SALV_C_BOOL_SAP=>FALSE
              R_CONTAINER    = LO_CONT
              CONTAINER_NAME = 'DOCK_CONT'
            IMPORTING
              R_SALV_TABLE   = LO_ALV
            CHANGING
              T_TABLE        = ME->IT_FINAL2.
        CATCH CX_SALV_MSG.
      ENDTRY.
CLEAR LR_COLUMN.
      TRY.
          LR_COLUMNS = LO_ALV->GET_COLUMNS( ).
          LR_COLUMN = LR_COLUMNS->GET_COLUMN( 'KSCHL' ).
          LR_COLUMN->SET_LONG_TEXT( 'Cond.Type' ).
CATCH CX_SALV_NOT_FOUND.
      ENDTRY.
NEW-PAGE PRINT ON.
        LO_ALV->DISPLAY( ).
        NEW-PAGE PRINT OFF.
I am not getting spool list while executing it in background.
BR,
Praveen

MC.9 - spool is not getting generated

Hi Experts,
When i execute MC.9 transaction in foreground i am able to view the report output. but when i execute it in background spool is not getting generated.
Please provide me any solution for this issue.
Thanks
Pallavi

Hi
I have checked list of versions in the 'select version' button. But my question is when i select 'execute in background', it is not generated spool. Is there any relation between spool and version. If there is, please explain me what it mean and how it relates.
As i am new to this module i wanted to know it, in brief detailed.
Thanks
Pallavi

Transportation lane KEY not getting generated in the table

Transportation lane KEY not getting generated in the table
Hi folks,
The issue is like this :
We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the TRPID is getting generated in the table /SAPAPO/V_TRPROD whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
____ for successful upload______________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY of successfully loaded workorder
Enter
This gives the following results
TRPID = TRPID KEY
LOCFR = LOCID KEY for manufacturing location
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for successfully loaded workorder
( This seems a self-lane, i.e both TO & FROM location are same)
____ for unsuccessful upload________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for unsuccessfully loaded workorder
Enter
This gives the following results
Error = No Table entries found for specified KEYS
We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
Please let us know in case someone faced a similar issue.
Many Thanks.
Kumar
Edited by: Blue Lotus on Jun 9, 2011 2:44 PM

Yes Anand.
We deleted the PPM & created it again, which didn't work.
Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
Why this TRPID is not getting generated in our only concern
Regards
Kumar

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

TDS reversal entry is not getting generated at time of F-54

Dear All,
I have made down payment request through F-47 transaction code and down payment made by Transaction code u2013F110 (instead of F-48) and TDS is deducted at this point. There after I made invoice through MIRO / F-43 in which TDS is again deducted for whole invoice amount. I have cleared down payment through T.code F-54. But at this time TDS reversal entry is not getting generated and only customer account is credited and debited.
So in short TDS is getting deducted at time down payment and at time of Invoice for their respective full value.
Note: For TDS type on payment I have selected u201CCentral Invoice PROPu201D and we are not using business place and section code. Please help me.
Appreciate all expertsu2019 help ASAP.
Thanks ,
Manas kumar

Hai Manas,
If ur not using business place how can u get remitance chalana thats why first u can configure the business plance. I think ur already posted some entries its correct? In this case u will run this t.code business place update the previous entries i.e., J1INPP this is very useful to u
Regards
Madhu I

STPPOD.DELVRY03 idoc not getting generated

Similar Messages

Maybe you are looking for