STPPOD triggered sending wrong material from SAP to SNC

Our process behave in this way when we receive a goods into our R/3, Proof of Delivery sent to SNC to update them that we have receipt the goods. And our system has setup in a way that only certain material and vendor are require to send GR feedback to SNC.   For some reason, our system will send IDOC of every inbound delivery (include all kinds of materials and vendors) to SNC whenever an inbound doc is created. This cause wrong update of Proof of delivery to SNC of un-related inbound document (i.e. unrelated vendor/Material).
I am wondering if the error cuased by the current setup of inbound delivery output type table in MN24 in which we only put in Delivery Type ==>  "EL", Funct ==>"VN", Partner ==> empty , Medium = A, Date/Time = 4, "Language = EN? This cause all inbound doc with EL will have OPOD get triggered?
Or is it my current WE20 setup?
A - Partner Type LS
Partner No. = PI Production,
Partner Type =LS (concist of STPPOD as message type) in the outbound parameter table.
B - Partner Type LI
Parnter No. = Vendor A
Partner Type =LI (concist of STPPOD as message type) in the outbound parameter table.
Please help thanks Tuffy

Hi Tuffy,
If you use VL31N/VL32N to send GR which means it will triggered STPPOD IDoc for which ASN is created.
Now when you do the GR using MIGO and execute RSMIPROACT again it will pick this GR to SNC because of this it will double the GR quantity in SNC.
You can use RSMIPROACT report for SMI and DR process for demand and stock information but not for GR if you are using VL31N/VL32N to send GR information to SNC.
My Question: ok if I will to remove the partner type LI setting by using A method (i.e. our initial method), may I know if I need to insert the partner no (i.e. PI production) in the MN23 output condition table?
Yes,If you are going to use LS then you need to remove LI partner type and insert the PI partner no in MN24 output table.
My Question: Previously Sandeep was suggesting using LI for the specific vendor master Number to create as partner no.in WE20, and now my system setup for MN23 include this particular vendor master No. (i.e. NOT the PI production), do you think it will solve this problem?
I am not sure whether it will work or not.
If your requirement is to automate vendor wise then it is also possible  using tcode:MN24 enter ouput type OPOD and select delivery type/vendor wise enter below detail:
Vendor;<Your vendor code>
Partner function:LS
Partner no:PI partner no
Medium:6
mode:4 (immediate send)
Lang:EN
save the setting.
I have configure as GR update to SNC with LS partner type and it is working fine without any issues.
Let me know for any clarification.
Regrads,
Nikhil

Similar Messages

  • Creation of Material from SAP VIEW using CDESK.

    Hi  Experts,
    I have one question related to creation of Material from SAP View.
    CAD file created say SM1000.prt
    Create DIR in CAD View say SM1000
    Scenario 1 :   Create Material in Background from CAD VIEW or SAP VIEW from cad desktop, It creates material SM1000
                               in background.
    Scenario 2 : Open CDESK ( Transaction)
                            Click on OPEN,
                            Selecting the DIR created SM1000
                            Create the material in background in SAP View, it gives message " enter material number"
    Why am not able to create the material from SAP view using CAD Desktop. If any modifications needs to be done in CDESK CUS to solve this please let me know.
    Thanks,
    Sudharshan

    Hi Sudharshan,
    maybe the reason for this is that your CAD applications provides a special material number and the customizing in CDESK is defined to use this number. In this case the number or value can by provided from the CAD application only from the CAD View.
    In the SAP view the material gets created like in MM01 for example and so mabye you have to enter a material number.
    Best regards,
    Christoph

  • Sample code to send a mail from SAP

    Hi guys
    could any one provide me with the
    sample code to send a mail from SAP with text as the main body of that mail via bcs classes

    Hi,
         Please go through this code: U can send mail;
    Tables : zchp_cust-info.
    DATA: OBJCONT LIKE SOLISTI1 OCCURS 5 WITH HEADER LINE.
    DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
    DATA: DOC_CHNG LIKE SODOCCHGI1.
    DATA: ENTRIES LIKE SY-TABIX.
    DATA: NAME(15).
    DATA: CON_NAME(20).
    DATA: req_num like zchp_cust_info.
    DATA: I_TAB_CHP LIKE ZCHP_CUST_INFO OCCURS 0 WITH HEADER LINE.
    *data: reno like ZCHP_CUST_INFO-req_num value .
    data input for the mail
    select * from zchp_cust_info
    appending table i_tab_chp where req_num = c_knumv.
    LOOP AT I_TAB_CHP.
    concatenate i_tab_chp-created_by i_tab_chp-req_num into CON_NAME.
    *WRITE: / con_name.
    ENDLOOP.
    Fill the document
    DOC_CHNG-OBJ_NAME = 'Refe'.
    DOC_CHNG-OBJ_DESCR = 'TESCRA Ref Number !'.
    DOC_CHNG-SENSITIVTY = 'P'.
    *OBJCONT = 'Tescra'.
    OBJCONT = CON_NAME.
    APPEND OBJCONT.
    OBJCONT = con_name.
    APPEND OBJCONT.
    DESCRIBE TABLE OBJCONT LINES ENTRIES.
    READ TABLE OBJCONT INDEX ENTRIES.
    DOC_CHNG-DOC_SIZE = ( ENTRIES - 1 ) * 255 + STRLEN( OBJCONT ).
    Fill the receiver list
    CLEAR RECLIST.
    RECLIST-RECEIVER = SY-UNAME.  " replace with <login name>
    RECLIST-REC_TYPE = 'B'.
    RECLIST-EXPRESS = 'X'.
    APPEND RECLIST.
    CLEAR RECLIST.
    RECLIST-RECEIVER = 'sapuser'.
    RECLIST-REC_TYPE = 'U'.
    APPEND RECLIST.
    Send the document
    CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
         EXPORTING
              DOCUMENT_TYPE  = 'RAW'
              DOCUMENT_DATA  = DOC_CHNG
              PUT_IN_OUTBOX  = 'X'
         TABLES
              OBJECT_CONTENT = OBJCONT
              RECEIVERS      = RECLIST
         EXCEPTIONS
              TOO_MANY_RECEIVERS         = 1
                   DOCUMENT_NOT_SENT          = 2
                  OPERATION_NO_AUTHORIZATION = 4
                   OTHERS                     = 99.
        CASE SY-SUBRC.
          WHEN 0.
            LOOP AT RECLIST.
              IF RECLIST-RECEIVER = SPACE.
                NAME = RECLIST-REC_ID.
              ELSE.
                NAME = RECLIST-RECEIVER.
              ENDIF.
              IF RECLIST-RETRN_CODE = 0.
                WRITE: / NAME, ': succesfully sent'.
              ELSE.
                WRITE: / NAME, ': error occured'.
              ENDIF.
            ENDLOOP.
          WHEN 1.
            WRITE: / 'Too many receivers specified !'.
          WHEN 2.
            WRITE: / 'No receiver got the document !'.
          WHEN 4.
            WRITE: / 'Missing send authority !'.
          WHEN OTHERS.
            WRITE: / 'Unexpected error occurred !'.
        ENDCASE.
    <b>Please provide points if the issue is solved.</b>
    Regards,
    Sunil

  • Hi.....I want to send outbond email from SAP ERP to Gmail useing SBWP Tcode

    I want to send outbond email from  SAP ERP to Gmail  useing SBWP transaction , for that i want standered BADI or BAPI or RFC to send an outbond mail.i want to send a email from sbwp t-code in that t-code we have title text box and body text box and receipent  and receipent type,after entering alll those values i want trigger my badi /bapi/rfc and also that mail goes to receipent Gmail indox and also sap user outbox in sbwp t-code
    Moderator message: Welcome to SCN!
    Moderator message: this is considered "spec dumping", please work yourself first on your requirement.
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Jul 13, 2011 9:25 AM

    Check note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
    Markus

  • Can we send .csv file from sap srm system to sap pi?

    Hi Experts,
    we have 3 options send the data from sap systems to sap pi.i. e.proxy,idoc and rfc only
    How can we send .csv file from sap srm to sap pi?
    Regards,
    Anjan

    Anjan
    As you know SAP SRM and SAP PI are different boxes.
    *_Option 1:_*
    we need a shared AL11 directory in between SAP SRM and SAP PI (Ask basis to setup shared folder). Place / Populate the file in the folder from SAP SRM and then it can be picked through sender file communication channel.
    In this case you (Basis team) will share one folder which is visible from the AL11 transaction of both the systems (SRM and PI). You will drop .csv file using some report or program from SRM at this location and from PI you can read that file using File communication channel (NFS mode).
    Option 2:
    Setup a FTP at SRM environment and expose some folder which can be accessible from PI. Use sender file communication channel at PI end to pick the file.
    You can use this option incase sharing of folder is not possible (due to network / other constrains). Here FTP server is required to expose any folder as FTP so as it can be accessible from internet (remote location). You need to expose some folder at SRM machine.  You will drop .csv file using some report or program from SRM at this location. Now PI can fetch the file from that location using  sender file communication channel (FTP Mode) providing user credentials.
    Hope it clears now.
    Regards
    Raj

  • Sending external email from SAP with following requirements...

    Hi All,
           I need to send external emails from SAP by meeting following requirements.
    1) With subject line more than 100 characters.
    2) No attachments, only body which has specific format (blueprint/layout) and would be amended often, hence code shouldn't be touched during amendments.
    3) Should be able to know the success/failure of mail sending at program level.

    Hi,
    The code below demonstrates how to send an email to an external email address
    *& Report  ZSENDEMAIL                                                  *
    *& Example of sending external email via SAPCONNECT                    *
    REPORT  zsendemail                    .
    PARAMETERS: psubject(40) type c default  'Hello',
                p_email(40)   type c default '[email protected]' .
    data:   it_packing_list like sopcklsti1 occurs 0 with header line,
            it_contents like solisti1 occurs 0 with header line,
            it_receivers like somlreci1 occurs 0 with header line,
            it_attachment like solisti1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    data:   it_message type standard table of SOLISTI1 initial size 0
                    with header line.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    Perform populate_message_table.
    *Send email message, although is not sent from SAP until mail send
    *program has been executed(rsconn01)
    PERFORM send_email_message.
    *Instructs mail send program for SAPCONNECT to send email(rsconn01)
    perform initiate_mail_execute_program.
    *&      Form  POPULATE_MESSAGE_TABLE
          Adds text to email text table
    form populate_message_table.
      Append 'Email line 1' to it_message.
      Append 'Email line 2' to it_message.
      Append 'Email line 3' to it_message.
      Append 'Email line 4' to it_message.
    endform.                    " POPULATE_MESSAGE_TABLE
    *&      Form  SEND_EMAIL_MESSAGE
          Send email message
    form send_email_message.
    Fill the document data.
      gd_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      gd_doc_data-obj_langu = sy-langu.
      gd_doc_data-obj_name  = 'SAPRPT'.
      gd_doc_data-obj_descr = psubject.
      gd_doc_data-sensitivty = 'F'.
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table it_message lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
    Add the recipients email address
      clear it_receivers.
      refresh it_receivers.
      it_receivers-receiver = p_email.
      it_receivers-rec_type = 'U'.
      it_receivers-com_type = 'INT'.
      it_receivers-notif_del = 'X'.
      it_receivers-notif_ndel = 'X'.
      append it_receivers.
    Call the FM to post the message to SAPMAIL
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_txt               = it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    Store function module return code
      gd_error = sy-subrc.
    Get it_receivers return code
      loop at it_receivers.
      endloop.
    endform.                    " SEND_EMAIL_MESSAGE
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          Instructs mail send program for SAPCONNECT to send email.
    form initiate_mail_execute_program.
      wait up to 2 seconds.
      if gd_error eq 0.
          submit rsconn01 with mode = 'INT'
                        with output = 'X'
                        and return.
      endif.
    endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM
    Hope this helps.
    Reward if helpful.
    Regards,
    Sipra

  • How will we send smtp mail from SAP via Exchange

    Hi;
    We changed SAP OS between Windows and Linux and still 4.6c . Now we use linux OS.
    We used smtp mail at SAP via Exchange with 3.party (sendmail,indigomail etc.) But Now I dont know how will we send smtp mail from SAP.
    Please help me,
    Thanks for answers.
    Moderator message: not directly related to ABAP development, please have look in the Netweaver forums, also search for available information on sending emails.
    Edited by: Thomas Zloch on Nov 22, 2010 2:39 PM

    Hi,
    What is the nature of the URL you wish to include in the e-mail ?
    Is it fixed or dynamic ?
    Cheers
    Colin.

  • Send binary files from SAP System to SAP XI/PI

    Dear experts,
    in our SAP ERP-System we have a link to JPG files which are stored in an archive. We want to send these files with some other information to our SAP XI and then store them on a file server. Is there a way to send a MIME attachment via RFC? Or is there another way to send binary files from SAP ERP to SAP XI? We want to avoid polling the files on OS level.
    Thanks and regards,
    David

    Most recommended way is to go for ABAP proxies. They support attachments.
    Regards,
    Prateek

  • Problem sending externail mail from SAP

    I am facing problem in sending external mail from SAP. for ex: yahoo, hotmail like that. But, i can able to send the mails to my domain ids. I have configured both the SMTP and SAP internet gateway to send mails.
    But, i dont know what could be the problem in sending external mails.
    Is there any body to help me in this regard
    Regards,
    B.Sudharsan

    Hi Sudarsan,
    How are you trying to send an e-mail using ABAP or using actions or ?
    Enclosed link gives you a complete overview of the settings and the way to send an e-mail using ABAP ( if necessary).
    /people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
    Reward points if it helps.
    Regards,
    Vamsi Krishna P.

  • Sending invoice direclty from SAP server to customers

    Hi,
    after configuring Smtp connection between SAP ECC and Exchange server. i'm able to send documents to people who's mail address are maintained in user master record .
    su01 > maintaining e-mail address for all sap users.
    whith in this list i'm able to send SAP attachements.
    But, only to   @xyz.com  (exchange server belongs to XYZ company and XYZ domain)
    if we maintain other domain address in the user master record.
    i.e.. for one sap user if we maintain e-mail address as @[email protected]
    SAP attachements can't be sent to different domain mail address.
    where it is getting stopped ?
    Exhange server or SAP server stop sending the attchment from SAP application to different domain address ?
    How about adding Default domain address in SCOT ?
    request you to trhough light on this issue.
    thanks in advance,
    by
    raghava rao

    Hi,
    after configuring Smtp connection between SAP ECC and Exchange server. i'm able to send documents to people who's mail address are maintained in user master record .
    su01 > maintaining e-mail address for all sap users.
    whith in this list i'm able to send SAP attachements.
    But, only to   @xyz.com  (exchange server belongs to XYZ company and XYZ domain)
    if we maintain other domain address in the user master record.
    i.e.. for one sap user if we maintain e-mail address as @[email protected]
    SAP attachements can't be sent to different domain mail address.
    where it is getting stopped ?
    Exhange server or SAP server stop sending the attchment from SAP application to different domain address ?
    How about adding Default domain address in SCOT ?
    request you to trhough light on this issue.
    thanks in advance,
    by
    raghava rao

  • To send outbound mails from SAP

    Hi team,
    Here i need to configure email setting from SAP to any other email ID ( yahoo,gmail etc).For this configuration do i need to confgure any program or to genrate some RFC settings.
    Can some one guide me the process step by step what to be done to send outbound mails from SAP. Immediate help will be really appreciated.
    thanks in advance.

    Check note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
    Markus

  • EDI IDOC OUTBOUND send Purchase Orders from sap to vendors

    Hi Experts,
           I am new to EDI IDOCS, but i got object on this. So my requirement is purchase orders are send to vendors from sap (OUTBOUND) through EDI-850 format. and also i have to add some more fields to standard idoc type ORDERS05, one more condition is if vendor type is not EDI, then the POs should send through fax, email, how can we solve this condition.
    So plaese send some sample code on this object.
    Thanks in advance,
    S Reddy

    Hi ,
    You can send the purchase order to the vendors using different outytpes configurations in NACE transaction .
    If you define a particular output type where you need to give medium 6 and define partner functions within this you can also set condition which partner needs to recieve EDI output and which one FAX or email all this will be done by Functional expert.
    For adding extra segments to your basic type ORDERS05  you need to extend the idoc you can do it via WE30 and WE31 .Link you message type to basic type and extension . Please follow below tcodes for further help . Create all the requested steps in the tcodes mentioned below.
    we20:patner profile
    we21:port
    we30:idoc creation
    we30:segment creation
    we81:message type
    we82:link message with idoc type.
    we02:to status of idocs.
    Now you need to write code for filling those extra segments you have added to you extension type. For that you need to check where your new segment is placed in Idoc structure . There will be a exit avaliable to attach your code to fill those segments .
    Please go through previous SDN links to see more info.
    One the settings are done in the NACE , issue output from PO transction and once your output is processed check your Idoc in WE02 to see if the segments are coming with the desired data.
    Regards
    Vikas

  • Unable to send an idoc from SAP R/3 to XI

    Hi,
    We are trying to send Z_CREMAS_SUSMM.CREMAS03 idoc from R/3 system to XI using IDOC adapter.
    We have done the following steps.
    On  SAP R/3 system:
    1.created a RFc Destination which points to the XI system using transaction SM59
    2.created a port in which we have selected  this RFC Destination   using tansaction WE21
    3.logical system for R/3  with transacion BD54
    4.In WE20 transaction,we have configured the PartnerProfile by adding the IDOC message type to the outbound Parameters of XI Logical system.
    On XI Sytem:
    1.Created RFC destination
    2.Created a Port
    3.Loaded metadata
    While trying to Post IDOc from SAP R/3,it is throwing an error"External segment name E2LFA1M001 cannot be interpreted"
    and "Basic type CREMAS03 does not exist" on XI side.
    Can anyone please provide a solution to this?

    HI Jagruthi,
    Have you loaded the metadata into the XI system by using IDX2?
    If it is done then try to delete once and do once again.
    And also delete the IDoc from IR and reimport the IDoc and activate it once again.
    Regards
    Goli Sridhar

  • How to send a mail from SAP 3.1H Ver.

    Hi,
      I am working on SAP 3.1H Version. I need to send mail from one of my ABAP program. Since SAP 3.1H version does not have Standard function modules which send mails from any ABAP program so how can I achive this task in this version of SAP.
    The Operating system of my application server is Sun solaris.
    Waiting for an early and postive reply.
    Thanks & Regards,
    Maqsood Khan

    REPORT ZSAPMAIL NO STANDARD PAGE HEADING.
    TABLES: DRAD,
            QINF,
            DRAW,
            SOUC,
            SOFD,
            DRAP.
    DATA: P_RETURN_CODE LIKE SY-SUBRC.
    data: d_username LIKE DRAP-PRNAM.
    mail declarations
    DATA : BEGIN OF NEW_OBJECT_ID.         " the newly created email object
            INCLUDE STRUCTURE SOODK.
    DATA : END OF NEW_OBJECT_ID.
    DATA : BEGIN OF FOLDER_ID.             " the folder id of the outbox
            INCLUDE STRUCTURE SOODK.
    DATA : END OF FOLDER_ID.
    DATA : BEGIN OF REC_TAB OCCURS 5.     " the table which will contain the
            INCLUDE STRUCTURE SOOS1.       " information on the destination
    DATA : END OF REC_TAB.
    DATA : BEGIN OF OBJECT_HD_CHANGE.      " the table which contains the
            INCLUDE STRUCTURE SOOD1.       " info for the object we will be
    DATA : END OF OBJECT_HD_CHANGE.        " creating
    DATA : OBJECT_TYPE LIKE SOOD-OBJTP.    " the type of object
    DATA : BEGIN OF OBJHEAD OCCURS 5.      " the header of the object
            INCLUDE STRUCTURE SOLI.
    DATA : END OF OBJHEAD.
    DATA : BEGIN OF OBJCONT OCCURS 0.      " the contents of the object
            INCLUDE STRUCTURE SOLI.        " i.e. the text etc
    DATA : END OF OBJCONT.
    DATA : BEGIN OF OBJPARA OCCURS 5.      " formatting options
            INCLUDE STRUCTURE SELC.
    DATA : END OF OBJPARA.
    DATA : BEGIN OF OBJPARB OCCURS 5.      " formatting options
            INCLUDE STRUCTURE SOOP1.
    DATA : END OF OBJPARB.
    DATA : BEGIN OF T_MAIL_TEXT OCCURS 0,  "Message table for messages to
            STRING(255),                   "user via mailbox
           END OF T_MAIL_TEXT.
    Parameter: p_uname like sy-uname.
    **START-OF-SELECTION
    START-OF-SELECTION.
        d_username = p_uname.
        PERFORM POPULATE_EMAIL_TEXT.
        PERFORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
        PERFORM CREATE_AND_SEND_MAIL_OBJECT.
          FORM POPULATE_EMAIL_TEXT                                      *
          Inserts text for email message                                *
    FORM POPULATE_EMAIL_TEXT.
      CLEAR T_MAIL_TEXT-STRING.            "puts a blank line in
      APPEND T_MAIL_TEXT.
      APPEND T_MAIL_TEXT.
    adds failed list  on to end of success list.
      T_MAIL_TEXT-STRING = 'Test email message line 1'.
      APPEND T_MAIL_TEXT.
      T_MAIL_TEXT-STRING = 'Test email message line 1'.
      APPEND T_MAIL_TEXT.
      CLEAR T_MAIL_TEXT-STRING.            "puts a blank line in
      APPEND T_MAIL_TEXT.
      T_MAIL_TEXT-STRING = 'Header1    Header2    Header3'.
      APPEND T_MAIL_TEXT.
      T_MAIL_TEXT-STRING = '----
      APPEND T_MAIL_TEXT.
    ENDFORM.
    *&      Form  SETUP_TRX_&_RTX_MAILBOXES
      Ensure that the mailboxes of the sender (INTMGR) are set up OK
    FORM SETUP_TRX_AND_RTX_MAILBOXES USING P_RETURN_CODE.
    get the user no of the sender in order to add the mail to the
    user name's outbox for future reference
      SELECT SINGLE * FROM SOUC
               WHERE SAPNAM = SY-UNAME.    "SAP name of a SAPoffice user
      IF SY-SUBRC NE 0.
        "Error finding the SAPoffice user info for the user
        MESSAGE E064(ZR53) WITH SY-UNAME.
        P_RETURN_CODE = 1.
        EXIT.
      ENDIF.
    *Get the outbox No for the sender from the user No where the folder
                                           " type is an outbox
      SELECT * FROM SOFD WHERE OWNTP = SOUC-USRTP   "Owner type from ID
                           AND OWNYR = SOUC-USRYR   "Owner year from the ID
                           AND OWNNO = SOUC-USRNO   "Owner number from the I
                           AND FOLRG = 'O'."Output box
      ENDSELECT.
      IF SY-SUBRC NE 0.
        " Error getting folder information for the user
        MESSAGE E065(ZR53) WITH SY-UNAME.
        P_RETURN_CODE = 1.
        EXIT.
      ENDIF.
    ENDFORM.                               " SETUP_TRX_&_RTX_MAILBOXES
    *&      Form  CREATE_AND_SEND_MAIL_OBJECT
    FORM CREATE_AND_SEND_MAIL_OBJECT.
      FOLDER_ID-OBJTP = SOFD-FOLTP.        " the folder type ( usually FOL )
      FOLDER_ID-OBJYR = SOFD-FOLYR.        " the folder year ( usually 22 )
      FOLDER_ID-OBJNO = SOFD-FOLNO.        " the folder no.
      OBJECT_TYPE     = 'RAW'.             " the type of object being added
    build up the object information for creating the object
      OBJECT_HD_CHANGE-OBJLA  = SY-LANGU.  " the language of the email
      OBJECT_HD_CHANGE-OBJNAM = 'PS to DM Interface'. " the object name
    mail subject 'Mass Linking of QA, pass/fail'
      MOVE TEXT-002 TO OBJECT_HD_CHANGE-OBJDES.
      OBJECT_HD_CHANGE-DLDAT = SY-DATUM.   " the date of the email
      OBJECT_HD_CHANGE-DLTIM = SY-UZEIT.   " the time of the email
      OBJECT_HD_CHANGE-OBJPRI = '1'.       " the priority ( highest )
      OBJECT_HD_CHANGE-OBJSNS = 'F'.       " the object sensitivity
    F is functional, C - company sensitive
    object_hd_change-skips  = ' '.       " Skip first screen
    object_hd_change-acnam  = 'SM35'.    " Batch imput transaction
    object_hd_change-vmtyp  = 'T'.       " Transaction type
    add the text lines into the contents of the email
      CLEAR OBJCONT.
      REFRESH OBJCONT.
    free objcont.      " added this to delete the mail contents records
      LOOP AT T_MAIL_TEXT.
        OBJCONT-LINE = T_MAIL_TEXT-STRING.
        APPEND OBJCONT.
      ENDLOOP.
      CLEAR OBJCONT.
    build up the table of receivers for the email
      REC_TAB-RCDAT = SY-DATUM.            " the date to send the email
      REC_TAB-RCTIM = SY-UZEIT.            " the time to send the email
    the SAP username of the person who will receive the email
      REC_TAB-RECNAM = D_USERNAME.
    the user type of the person who will send the email ( USR )
      REC_TAB-SNDTP = SOUC-USRTP.
    the user year of the person who will send the email ( 22 )
      REC_TAB-SNDYR = SOUC-USRYR.
    the user number of the person who will send the email
      REC_TAB-SNDNO = SOUC-USRNO.
    the sap username of the person who will send the email
      REC_TAB-SNDNAM = SY-UNAME.
    get the user info for the receiver of the document
      SELECT SINGLE * FROM SOUC WHERE SAPNAM = D_USERNAME.
      IF SY-SUBRC NE 0.
        WRITE : / TEXT-001, D_USERNAME.    "usnam.
        EXIT.
      ENDIF.
    the user number of the person who will receive the email ( USR )
      REC_TAB-RECNO = SOUC-USRNO.
    the user type of the person who will receive the email ( USR )
      REC_TAB-RECTP = SOUC-USRTP.
    the user year of the person who will receive the email ( USR )
      REC_TAB-RECYR = SOUC-USRYR.
    the priority of the email ( highest )
      REC_TAB-SNDPRI = '1'.
    check for delivery on the email
      REC_TAB-DELIVER = 'X'.
    send express so recipient knows there is a problem
      REC_TAB-SNDEX = 'X'.
    check for a return receipt
      REC_TAB-READ = 'X'.
    the sap username of the person receiving the email
      REC_TAB-ADR_NAME = D_USERNAME.       "usnam.
    add this receiver to the internal table
      APPEND REC_TAB.
      CLEAR REC_TAB.
    call the function to create the object in the outbox of the sender
      CALL FUNCTION 'SO_OBJECT_INSERT'
           EXPORTING
                FOLDER_ID                  = FOLDER_ID
                OBJECT_HD_CHANGE           = OBJECT_HD_CHANGE
                OBJECT_TYPE                = OBJECT_TYPE
                OWNER                      = SY-UNAME
           IMPORTING
                OBJECT_ID                  = NEW_OBJECT_ID
           TABLES
                OBJCONT                    = OBJCONT
                OBJHEAD                    = OBJHEAD
                OBJPARA                    = OBJPARA
                OBJPARB                    = OBJPARB
           EXCEPTIONS
                ACTIVE_USER_NOT_EXIST      = 1
                COMMUNICATION_FAILURE      = 2
                COMPONENT_NOT_AVAILABLE    = 3
                DL_NAME_EXIST              = 4
                FOLDER_NOT_EXIST           = 5
                FOLDER_NO_AUTHORIZATION    = 6
                OBJECT_TYPE_NOT_EXIST      = 7
                OPERATION_NO_AUTHORIZATION = 8
                OWNER_NOT_EXIST            = 9
                PARAMETER_ERROR            = 10
                SUBSTITUTE_NOT_ACTIVE      = 11
                SUBSTITUTE_NOT_DEFINED     = 12
                SYSTEM_FAILURE             = 13
                X_ERROR                    = 14
                OTHERS                     = 15.
      IF SY-SUBRC NE 0.
        MESSAGE A063(ZR53) WITH SY-SUBRC.
        EXIT.
      ENDIF.
    call the function to send the already created email to the receivers
      CALL FUNCTION 'SO_OBJECT_SEND'
           EXPORTING
                FOLDER_ID                  = FOLDER_ID
                OBJECT_ID                  = NEW_OBJECT_ID
                OUTBOX_FLAG                = 'X'
                OWNER                      = SY-UNAME
           TABLES
                RECEIVERS                  = REC_TAB
           EXCEPTIONS
                ACTIVE_USER_NOT_EXIST      = 1
                COMMUNICATION_FAILURE      = 2
                COMPONENT_NOT_AVAILABLE    = 3
                FOLDER_NOT_EXIST           = 4
                FOLDER_NO_AUTHORIZATION    = 5
                FORWARDER_NOT_EXIST        = 6
                NOTE_NOT_EXIST             = 7
                OBJECT_NOT_EXIST           = 8
                OBJECT_NOT_SENT            = 9
                OBJECT_NO_AUTHORIZATION    = 10
                OBJECT_TYPE_NOT_EXIST      = 11
                OPERATION_NO_AUTHORIZATION = 12
                OWNER_NOT_EXIST            = 13
                PARAMETER_ERROR            = 14
                SUBSTITUTE_NOT_ACTIVE      = 15
                SUBSTITUTE_NOT_DEFINED     = 16
                SYSTEM_FAILURE             = 17
                TOO_MUCH_RECEIVERS         = 18
                USER_NOT_EXIST             = 19
                X_ERROR                    = 20
                OTHERS                     = 21.
      IF SY-SUBRC EQ 0.
        MESSAGE I035(ZR53) WITH NEW_OBJECT_ID D_USERNAME. "usnam.
      ELSE.
        MESSAGE I036(ZR53) WITH D_USERNAME."      sy-subrc.
      ENDIF.
    ENDFORM.                               " CREATE_AND_SEND_MAIL_OBJECT
    award points if useful,
    Aleem.

  • How to apply Password Protection On attachment send through mail from SAP

    Hi All,
       I want to apply Password Protection on file send as an attachment from SAP on Email.
    I know how to send email from sap with attachment in it.  A smartform is coverted to a attachment and send on email.
    But how can i apply password protection on it.
    Any type of file format will be fine. I just need to know how can i make that file as password protected.
    Thanks in advance.
    Sonal Jain.

    >
    Sonal Jain wrote:
    But how can i convert the PDF to folder and than how can i zip that folder with password protection.
    Not folder but file (I do hope you understand the difference). Have you tried to search SDN at all? I don't have much time, but before replying initially I did just a quick search and it brought several posts mentioning the archiving functionality. And I'm sure 'Smartform to PDF' will bring up gozillion posts. Also I find the Google search with addition 'site:sap.com' to be quite helpful.
    However, I would still recommend to review the requirements. Why exactly do you need this password protection? If there is a fear that someone other than a recipient might get access to the email account then there is really a bigger security issue in the organization and it should be resolved by some other means. As I have mentioned, password does not really add much protection.
    Out of curiosity I briefly looked at the IRM description on the Microsoft's web site and it doesn't seem to be very helpful. First of all, it's the MS software and has to be installed on the user's PC and configured (how do we know the emai recipients are even on Windows?). Also it does say "Prevent an unauthorized recipient from accessing e-mail content", but I didn't quite get how exactly. Is there a retinal scan that comes with it? And the list of things it does not do gives you the whole another perspective on the email security.

Maybe you are looking for