Straight Line Lease Rental Accounting

Hi Experts,
Currently I'm working on SAP RE-Fx implementation project for a Retail client.
There is a requirement for generating Accounting reporting based on IAS17, Lease Rental Accounting Standards.
PFA an example of how the Lease Rental Accounting should generate the accounting entries.
I need inputs related to:
1) Which SAP Note is available to be implemented for St.Line Lease Rental Accounting in Commercial Lease -In business scenario.
2) What configurations (E2E) needs to be maintained in RECACUST for the St.Line Lease Rental Accounting
Thanks
Shantanu Kar

Hi Vimal.
Thanks for your prompt reply.
I've checked this SAP Note. This note is talking about St.Line Lease Rental Accounting for Lease-Out scenarios. Is this note also applicable for Lease-In scenarios as well?
Also, if you can provide details of configuration set up needed to be done in RECACUST for St.line lease rental accounting.
Thanks
Shantanu Kar

Similar Messages

Use AM module to post pre-paid expense asset amortization (Straight Line)

I'm new to this area and please explain in detail what I'm supposed to do for this requirement.
The requirement: Use AM module to post pre-paid expense asset amortization (Straight Line amortization)
The implementation of this capability will allow Property Accounting to enter prepaid expenses into the FA subledger and have SAP automatically post monthly straight line amortizations as part of the month-end process. The idea is to configure a new asset class for "prepaid Leasing Commission" assets that will have the following GL accounts.
GL Account: 159001000
Cost Center: 159001000
Profit Center: SN09120001
Non-Reconcilition Account: 159002000
Expense Account: 890304000
What I have done so far:
I have created an asset and have created a Cost center and assigned the profit center to that. I have also created a non-recon account. The question is where do I use the Non-recon account and the expense account and have the SAP post it automatically? Will be helpful if you can provide the steps I should be following and the tcodes for this. Thanks for the help.

Hi,
I would recommend that you go through the IMG of Fixed Asset Accounting and complete the FI-AA configuration.
You store the accounts to be used in postings in the node "Integration with General Ledger".
Requirements to use cost center as accounting object are documented in the SAP Help Portal as well as in note 684659.
Regards,
Markus

Automatically post the lease rental charges for oprating lease asset using

hi
i tried that way which you have given but the wht tac and tax code i am not getting
anyone can send the coding accordingly
the requirement is like that
Company code (BUKRS) - Mandatory
             Asset class (ANLKL) - Mandatory -
             Vendor (Leasing company) (LEAFI) - Mandatory
             Business Place (BUPLA)
             WHT Tax code (QSSKZ)
             Tax code (MWSKZ)
             Document type (BLART) - Mandatory
             Document Date (BLDAT) ) - Mandatory
             Posting Date (BUDAT) - ) - Mandatory
             Reference (XBLNR) - ) - Mandatory
             Document Header text (BKTXT) - ) - Mandatory
Logic:
Pass the values in ANLA for .
Company code-BUKRS
Asset Class-ANLKL
Vendor (Leasing company)-LEAFI
Get ANLA-ANLN1 and Lease payment (ANLA-LEGEB) from ANLA table
where Leasing Type ANLA-LEART=02(Operating Lease) . Check Deactivation date ANLA-DEAKT=space OR Posting date in selection BUDAT<= ANLA-LKDAT
    After getting all Assets related to selection vendor post the lease rental document by calling F-02 transaction code (Check BAPI available)
The program should post the lease payment amount by crediting vendor with sum of lease payment for all assets selected for this vendor and debiting the individual lease payments to u2026u2026.
Checks at the time of posting:
1. Pass the Business place value in to Section code also
2. Ensure except WHT code entered in selection screen, all the other WHT codes are deleted at the time of posting.
3. At the time of posting document in the lease rental for Asset line item text it should fill with u201CLease rent for Asset numberu2026u2026u2026for the month of u2026.u201D
Edited by: jnanaranjan.paikray on Jul 30, 2010 9:26 AM

hi raj
i got it
thk for everything

Depreciation key - Straight line method

Hi,
I have an asset with ord deprecition start date on 1.7.07. After the financial year close on 31.3.2008, we have change the ord. depn start date to 1.3.2007. Now, the adjustment is being admortised to the asset useful life (3 years) instead of catch up on the next posting run. Asset is having depn key NBV/remaining useful life with catch up method.
My accountant do not want to perform any write-up nor unplanned for this asset. We suspect something might be wrong at the depn key setting.
How to create a depn to enable the adjustment posted on the next run with straight line depn NBV/remaining useful life.
Can anyone tell me what is the parameter to be set for each of the following,
Base method
period control
multilevel
changeover
Thanks,
CL

.

FR straight-line depr by day & decl-balance by period & derived area

Hi experts,
In ECC6 for a French company, we have configured an asset class as following:
- depreciation area 01 - using a depreciation key with straight-line depreciation to the day
- depreciation area 02 - using a depreciation key with declining-balance by period
- depreciation area 03 - derived area 02-01 ; as we do not want to have any depreciation calculated in area 03 if accumulated depreciation in area 01 is higher than depreciation area 02, we have configured area 03 with only negative net book value accepted.
These settings comply with legal requirements in France.
This configuration was working in R/3 versions, but does not work anymore in ECC6. We are blocked by the message AA087 "The depreciation area 03 cannot be processed, because it was not transferred to the function module for breaking down the derived depreciation area." We can resolve this by setting the indicator "Area for reporting purposes only" on depreciation area 03 but then this calculates depreciation regardless on whether accumulated depreciation in area 01 is less or more than accumulated depreciation in area 02.
I suppose this problem must have been met in France several times since ECC6 is available but I could not find any discussion or OSS note on this. I am therefore looking for someone who has already faced this issue and has found a configuration setting, an OSS note or an acceptable workaround.
Many thanks.
Regards,
Xavier

Hi Bernhard,
OSS note 1161265 enables me to do what I wanted.
I have actually configured 5 areas:
01- IFRS - straight line depreciation by period
02- Local book accounting - straight line depreciation by day
03- 2-1
04- Local tax depreciation - declining-balance by period
05- 4-2
I have assigned the area usage 1 to area 03 and the area usage 2 to area 05. Area 03 is configured as accepting any net book value and posting, area 05 as only accepting negative net book value and is statistical.
I don't have message AA 087 any more when creating the asset. And if area 05 has a NBV positive, then depreciation in area 04 is adjusted and nothing is therefore calculated in area 05.
So it seems to work. Thanks!
Regards,
Xavier

Line Saver Rental - existing monthly discount and ...

My current BT rental deal is 'Renewable Unlimited Evening and Weekend Plus ', which gives me free evening and weekend calls at £16.60 less £4 discount = £12.60 per month annual renewing contract (started 10 Aug 09).
I also get a £1.25 per month discount for paperless billing, and I know I lose that once I go for Line Saver Rental.
But I understand that my existing monthly contract remains to be reverted to if I take the Line Saver Rental option. So does that mean that, if I allow the Line Saver Rental to lapse after a year, that I go back to my £4 discount deal?
(or even better, does it mean that I would get 12 months' x £4 = £48 discount off my cost of Line Saver Rental?)
Also, by default, my calls are redirected by CPS to Primus at the exchange, but I can route them via BT instead by using a 1280 suffix. Would this still be the situation under a Line Saver Rental contract, and would I still be able to use predial suffices such as 18185?

Hi RatAtAt,
Thanks for posting. When you sing up for the line rental saver option whatever offer you have on your calling package will continue for the duration of the contract. You can find information on the 1280 service here . Hope that helps.
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Useful life different bewteen straight line and declining balance

Have any one used different useful life between straight line and declining balance ?
Does it work correctly?
Thanks

HI,
Please check in the given path:
Financial Accounting ->Asset Accounting - Valuation- Determine Depreciation Areas in the Asset Class
Check here for your asset class, any value maintained in the fields useful life.
Mostly you enter default Useful life for each asset class.

Problem with creating a straight line with polygamo lasso

I am having a problem with polygamo lasso. when i create a triangle or a rechtangle in straight line it is turn out the line become not straight. I don't what did i wrong, was always working fine till today. YOu can see the pic the top line lookslike a step.

Ihope I did right, was not sure how to save as channel.

I setup messaging on my verizon, however I have multiple lines on the account and it is showing messaging only for one phone line. Is there a way to toggle between multiple lines on the myverizon site?

How do I toggle between multiple phone lines while on the myverizon website in regards to messaging?

The Account Owner can see the call/text logs for all lines on the account, but each line needs its own My Verizon account for messaging and backups. Those lines will be listed as Account Members and will have limited info. available to them regarding the account.

How to draw only straight line instead of angled one??

Dear friends,
I saw a very good code posted by guru here(I think is camickr),
But I tried to change it and I hope to draw only straight line instead of angled one, can you help how to do it??
Thanks so much.
import java.util.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class DrawingArea extends JPanel
     Vector angledLines;
     Point startPoint = null;
     Point endPoint = null;
     Graphics g;
     public DrawingArea()
          angledLines = new Vector();
          setPreferredSize(new Dimension(500,500));
          MyMouseListener ml = new MyMouseListener();
          addMouseListener(ml);
          addMouseMotionListener(ml);
          setBackground(Color.white);
     public void paintComponent(Graphics g)
          // automatically called when repaint
          super.paintComponent(g);
          g.setColor(Color.black);
          AngledLine line;
          if (startPoint != null && endPoint != null)
               // draw the current dragged line
               g.drawLine(startPoint.x, startPoint.y, endPoint.x,endPoint.y);
          for (Enumeration e = angledLines.elements(); e.hasMoreElements();)
               // draw all the angled lines
               line = (AngledLine)e.nextElement();
               g.drawPolyline(line.xPoints, line.yPoints, line.n);
     class MyMouseListener extends MouseInputAdapter
          public void mousePressed(MouseEvent e)
               if (SwingUtilities.isLeftMouseButton(e))
                    startPoint = e.getPoint();
          public void mouseReleased(MouseEvent e)
               if (SwingUtilities.isLeftMouseButton(e))
                    if (startPoint != null)
                         AngledLine line = new AngledLine(startPoint, e.getPoint(), true);
                         angledLines.add(line);
                         startPoint = null;
                         repaint();
          public void mouseDragged(MouseEvent e)
               if (SwingUtilities.isLeftMouseButton(e))
                    if (startPoint != null)
                         endPoint = e.getPoint();
                         repaint();
          public void mouseClicked( MouseEvent e )
               if (g == null)
                    g = getGraphics();
               g.drawRect(10,10,20,20);
     class AngledLine
          // inner class for angled lines
          public int[] xPoints, yPoints;
          public int n = 3;
          public AngledLine(Point startPoint, Point endPoint, boolean left)
               xPoints = new int[n];
               yPoints = new int[n];
               xPoints[0] = startPoint.x;
               xPoints[2] = endPoint.x;
               yPoints[0] = startPoint.y;
               yPoints[2] = endPoint.y;
               if (left)
                    xPoints[1] = startPoint.x;
                    yPoints[1] = endPoint.y;
               else
                    xPoints[1] = endPoint.x;
                    yPoints[1] = startPoint.y;
     public static void main(String[] args)
          JFrame frame = new JFrame("Test angled lines");
          frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          DrawingArea d = new DrawingArea();
          frame.getContentPane().add( d );
          frame.pack();
          frame.setVisible(true);
}

Change the AngledLine class to store two points instead of 3 points (I would rename the class to be StraightLine). The code is much simpler because you just store the starting and ending points and you don't need to calculate the middle point.

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had t

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.

Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg

SWITCHING LINE FROM ONE ACCOUNT TO ANOTHER.....WILL IT RENEW?

I have a 2G iPhone now. I am on my mothers account. She is the primary account holder. I created a separate account as myself as the primary account holder for my girlfriends line. I would like to purchase the 3G iPhone tomorrow. It says you need to have the primary account holder present to purchase iPhone 3G. I would like to put my line from the account I am with now (Mothers Primary Account) to my account (Myself Primary Account). That away I do not need her to come down with me to buy the phone. NOW MY QUESTION IS IF I TRANSFER MY 2G IPHONE (SAME NUMBER AND SIM CARD) FROM ONE ACCOUNT TO ANOTHER WILL THAT RENEW MY CONTRACT FOR THAT LINE/ MAKE ME INELLIGABLE FOR THE UPGRADE OF THE $299 FOR THE 16GB?

DON'T TELL ME HOW TO LIVE MY LIFE.

When I record an audio track, there is a waveform. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is there. How can I stop the waveform from disappearing?

When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?

In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform.

Ssrs 2008 r2 straight line within a matrix

In an SSRS 2008 R2 new report have placed a matrix on the end of the report for information the user wants to see at the end of the report. The user wants to place a straight line between the different infomation sections in the tablix. Here are the problems
I am having:
1. In a row I would like to merge 2 cells together so that a line placed within the matrix is the same length. The problem is that I do not know how to merge the cells.
2. When I drag a line into a cell in the matrix, the line is not straight. The line points to an angle. I have tried to change the properties of the line on the endpoint values but that has not worked. Thus can you tell me how to make the line placed within
a matrix cell to be straight?

Take a look at this post for inserting a horizontal (or vertical) line into a tablix cell:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/397d6dc4-766a-43c9-9706-5370a2bfaeb4/insert-line-into-table?forum=sqlreportingservices
For merging cells, you simply select a set of contiguous cells, right-click, merge cells. There is a catch of course. The catch is that all of the cells you are trying to merge must be in the same scope. Below are some screenshots showing a simple Matrix
with 1 column group and 1 row group.
As you can see in this screenshot, I have selected 2 adjacent cells that are both in the same scope, and merge cells is available.
In this screenshot, I have selected 2 adjacent cells that are not in the same scope. The left cell is only scoped by the row group while the cell on the right is scoped by both the row and the column group. As a result, I cannot merge the cells.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

How to get rid of or at least easily fix random Position A to Positon B 'archs'?(want straight line)

Hey,
I hope i can describe my question correctly: is there a way to tell after effects that i want to default every position edit to be a straight path/arch (i'm actually looking for a lack of 'arch'--I just want a straight line) instead of defaulting to a seemingly random arch that i then find very tedious if not impossible to fix, even by manipulating vertice box 'arms' while holding alt? in other words, can i tell the program that, from now on, 'position A' and 'position B' must be traveled between in a straight line ONLY, never any erronious archs? i hope i described it well enough without being too familar with technical terms
thanks

Rick's pointing you in the right direction.
Details are here:
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7d99 a.html#WS3878526689cb91655866c1103906c6dea-7d98a

Straight Line Lease Rental Accounting

Similar Messages

Maybe you are looking for