Straight line problem in n8

i have purchased nokia n8 two months before, now it shows a straight thin line in my upper screen and also the touch keypad buttons and other menu bar colour changed to light black, does anyone facing similar problem nd how to fix it, video quality is nt same after it

Hi,
Welcome to the forum!
What happened to your N8 before it shows the straight line on the screen? Is there any instance that you accidentally drop your phone? Note that this can be the caused of the issue. In this case, you need to send your phone to the Nokia Care Point to have it physically assessed by the technicians. In addition, charges may apply for the out of warranty phones. 
Visit this link for further assistance from your local support: www.nokia.com/support

Similar Messages

  • Problem with creating a straight line with polygamo lasso

    I am having a problem with polygamo lasso. when i create a triangle or a rechtangle in straight line it is turn out the line become not straight. I don't what did i wrong, was always working fine till today. YOu can see the pic the top line lookslike a step.

    Ihope I did right, was not sure how to save as channel.

  • Problem connecting two seperate straight line paths. Please help!

    Hi there, I'm new to illustrator and have been having a problem connecting two straight line paths. They never seem to line up correctly. Attached is a photo of the problem. I assume this is an easy fix but I can't figure it out myself.

    Brigid,
    There seems to be two aspects:
    One is to get the end points to coincide. You may tick View>Snap Guides, then click one path by the end Anchor Point and drag it to snap (Smart Guides say anchor when you are there).
    The other is to get rid of the gap in the stroke(s), You may join the paths into one, dragging across the coinciding Anchor Points with the Direct Selection Tool and Ctrl/Cmd+J, or you may keep the separate paths and change the Cap to Round in the Stroke palette/panel which will give you a rounded outer appearance); I presume the former is what you wish, in which case you may choose between Round and Miter Join.

  • After Effect CS5.5_Pen tool problem: No Handles display, can't creat straight line

    Hi,
    I wonder why in After effects CS5.5, the pen tool doesn't work correctly!
    1. "no handles display", ex: when I click an area whilst holding the mouse and clicking / or hold Alt and clicking the point in order to see the handles.
    2. cannot make "straight line", neither can I make 45 degree coner while holding the shift key clicking.
    I coud use it before, but now it no longer work. I tried "the pen tool" in photoshop cs5.1 it works very well.
    Is there any solution?
    Thanks

    Thanks Rick,
    1. Do you have the View Options setup correctly?
    Yes, I guess. Beacuse everything is checked.
    2.Have you hidden the layer controls?
    No.
    Are you using Roto Bezier?
    No.
    3....If it's not try trashing your prefs.
    How do you trash the prefs?
    I didn't modify any setting in the prefs.
    Btw, what does that title stand for "community professional"? Are you working for Adobe?

  • Ssrs 2008 r2 straight line within a matrix

    In an SSRS 2008 R2 new report have placed a matrix on the end of the report for information the user wants to see at the end of the report. The user wants to place a straight line between the different infomation sections in the tablix. Here are the problems
    I am having:
    1. In a row I would like to merge 2 cells together so that a line placed within the matrix is the same length. The problem is that I do not know how to merge the cells.
    2. When I drag a line into a cell in the matrix, the line is not straight. The line points to an angle. I have tried to change the properties of the line on the endpoint values but that has not worked. Thus can you tell me how to make the line placed within
    a matrix cell to be straight?

    Take a look at this post for inserting a horizontal (or vertical) line into a tablix cell:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/397d6dc4-766a-43c9-9706-5370a2bfaeb4/insert-line-into-table?forum=sqlreportingservices
    For merging cells, you simply select a set of contiguous cells, right-click, merge cells. There is a catch of course. The catch is that all of the cells you are trying to merge must be in the same scope. Below are some screenshots showing a simple Matrix
    with 1 column group and 1 row group.
    As you can see in this screenshot, I have selected 2 adjacent cells that are both in the same scope, and merge cells is available.
    In this screenshot, I have selected 2 adjacent cells that are not in the same scope. The left cell is only scoped by the row group while the cell on the right is scoped by both the row and the column group. As a result, I cannot merge the cells.
    "You will find a fortune, though it will not be the one you seek." -
    Blind Seer, O Brother Where Art Thou
    Please Mark posts as answers or helpful so that others may find the fortune they seek.

  • My Macbook Pro (OSX 10.6.7 2.26 GHz Intel Core 2 Duo) has started misbehaving on me. When I'm working, the cursor will start spontaneously moving to the left in a straight line, and randomly right clicking on things.  If I close the computer and open it b

    my Macbook Pro (OSX 10.6.7 2.26 GHz Intel Core 2 Duo) has started misbehaving on me. When I'm working, the cursor will start spontaneously moving to the in a straight line, and randomly right clicking on things.
    If I close the computer and open it back up, it sometimes stops for a little while, then will spontaneously start again. Any help would be truly appreciated. Thanks!

    See this knowledge base article. Also, you might want to update to 10.6.8 (don't know that that will fix your problem, but it's the latest version of Snow Leopard).
    Clinton

  • Why can I only paint straight lines in Photoshop CS6?

    I am trying to paint something that I have wanted to for a while now, and Photoshop is presenting some troubles for me. I can not paint curves, and instead, only straight lines without pen pressure (Size, opacity, the likes.) The result of my efforts is the same as if I were to draw a dot (click once in other words), press shift, and make another dot somewhere else. It's just straight lines no matter what.
    I am currently on an Emachines computer running Windows 7, Photoshop CS6 and this is the first time I have bothered with the brush tool in Photoshop.
    I hope this information is useful for someone to help me so that I may paint freely. Thank you for reading.

    Trevor Dennis wrote:
    Bulbabooty wrote:
    What do you mean by the first sentence you said?
    It is possible that the Shift key is stuck on your keyboard.  If you add a Type layer and some text, you'll see if that is the case or not.  Unlikely I'd have thought, but things can get jammed between the keys, and you need to eliminate this possibility before moving on to other possibilities.
    Oh, I see. No, the shift key is not the problem it seems. I have a feeling that it's the brush I'm using.

  • Simplifying Straight Line Paths

    Hey all,
    new to the forum and really struggling with something at the moment, Using Illustrator CS4
    I've imported a map from a DWG prepared in Archicad (vector based architecture software)
    This map shows roads and buildings (they are paths in illustrator) and as you would imagine the roads are curved but rather than being drawn with curves they are composed of many many straight line paths and as I'm meaning to have a model laser cut from the Illustrator file I need to join these paths into longer paths so the laser cutting doesn't take forever.
    As far as I can see it's fairly simple to simplify the number of anchor points on a curved path using the Object>Path>Simplify tool but simplifying multiple straight line paths that only have the slightest deviation in angle seems harder, or at least I can't work it out.
    I have attached an image, The areas highlighted in green are examples of areas where there are too many paths and just one or two paths would be fine. It would be fine to either convert the paths to curved paths or just simply reduce the number of straight line paths that compose the curves.
    Hope someone can help, Thx for your time
    The

    Apart from the current problem, you should take a look at the free plugin "Kartografie-Funktionen" if you do this kind of stuff regularly. http://www.ika.ethz.ch/plugins/index.html
    It has a tool for simplifying paths, which works slightly different than Illustrator's

  • Flash CC 2014 Drawing with tablet creates straight lines

    I recently downloaded Flash and Photoshop from the free student service and when I use my tablet Intuos4, the lines you see are drawn but it's also draws in the far left, the start of the straight line is where I actually start but for some reason it draws a straight line shifting to the left.
    I checked if it was my shift key from the keyboard and tablet to see if it was jammed, but on the bottom half of the canvas you notice that when I do use my shift key it still draws straight lines and still goes to the far left.
    I updated my drivers for my tablet and it still didn't do anything, it doesn't happen to any other program like Photoshop, it detects the tablet and draws normally.
    Help please?
    http://oi59.tinypic.com/2r6igjq.jpg

    Hi.
    I am experiencing some serious issues with flash professional cc and my drawing tablet. Every time I place my drawing pen on the surface of my tablet, while in flash professional cc, a long straight line darting to the left and beyond my canvas occurs. I haven't messed with any of my settings for I just got the tablet today as well as the flash professional cc program. It's very frustrating and is hindering my work. If this problem is not resolved, I will take my business and money elsewhere.
    Thank you.
    All specs:
    Flash Professional CC 2014 v. 14.1.0.96
    Windows 7
    Monoprice Graphic Drawing Tablet 10x6.25 inch 4000 LPI, 200 RPS, 2048 Levels

  • There is a white straight line which comes under the Most Visited, Getting Started and latest headlines and continues to be on the entire firefox. I tried uninstalling and reinstalling but does not work.

    Got Plugins symbol at the white straight line...
    == This happened ==
    Every time Firefox opened
    == 1 day ago

    Hello Iqbal.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • FR straight-line depr by day & decl-balance by period & derived area

    Hi experts,
    In ECC6 for a French company, we have configured an asset class as following:
    - depreciation area 01 - using a depreciation key with straight-line depreciation to the day
    - depreciation area 02 - using a depreciation key with declining-balance by period
    - depreciation area 03 - derived area 02-01 ; as we do not want to have any depreciation calculated in area 03 if accumulated depreciation in area 01 is higher than depreciation area 02, we have configured area 03 with only negative net book value accepted.
    These settings comply with legal requirements in France.
    This configuration was working in R/3 versions, but does not work anymore in ECC6. We are blocked by the message AA087 "The depreciation area 03 cannot be processed, because it was not transferred to the function module for breaking down the derived depreciation area." We can resolve this by setting the indicator "Area for reporting purposes only" on depreciation area 03 but then this calculates depreciation regardless on whether accumulated depreciation in area 01 is less or more than accumulated depreciation in area 02.
    I suppose this problem must have been met in France several times since ECC6 is available but I could not find any discussion or OSS note on this. I am therefore looking for someone who has already faced this issue and has found a configuration setting, an OSS note or an acceptable workaround.
    Many thanks.
    Regards,
    Xavier

    Hi Bernhard,
    OSS note 1161265 enables me to do what I wanted.
    I have actually configured 5 areas:
    01- IFRS - straight line depreciation by period
    02- Local book accounting - straight line depreciation by day
    03- 2-1
    04- Local tax depreciation - declining-balance by period
    05- 4-2
    I have assigned the area usage 1 to area 03 and the area usage 2 to area 05. Area 03 is configured as accepting any net book value and posting, area 05 as only accepting negative net book value and is statistical.
    I don't have message AA 087 any more when creating the asset. And if area 05 has a NBV positive, then depreciation in area 04 is adjusted and nothing is therefore calculated in area 05.
    So it seems to work. Thanks!
    Regards,
    Xavier

  • Straight line again

         if (mousecounter == 0)
              slope = (newx-oldx)/(newy-oldy);
              slope2 = (newy-oldy)/(newx-oldx);
              ++mousecounter;
    oldx = oldx+ slope;
    oldy = oldy + slope2;I need desperate help.......... I need to be able to take the old coordinates (oldx. oldy) and move them in straight line to (newx, newy). The problem is, its a mouse click, and it will need to be able to move forward, backward, side to side, etc in a straight line...... Suggestions?

    Taken from: http://catb.org/esr/faqs/smart-questions.html
    If You Can't Get An Answer
    "If you can't get an answer, please don't take it personally that we don't feel we can help you. Sometimes the members of the asked group may simply not know the answer. No response is not the same as being ignored, though admittedly it's hard to spot the difference from outside.
    In general, simply re-posting your question is a bad idea. This will be seen as pointlessly annoying. Have patience: the person with your answer may be in a different time-zone and asleep. Or it may be that your question wasn't well-formed to begin with."

  • Straight line

              if (mousecounter == 0)
              slope = (newx-oldx)/(newy-oldy);
              slope2 = (newy-oldy)/(newx-oldx);
              ++mousecounter;
    oldx = oldx+ slope;
    oldy = oldy + slope2;I need desperate.......... I need to be able to take the old coordinates (oldx. oldy) and move them in straight line to (newx, newy). The problem is, its a mouse click, and it will need to be able to move forward, backward, side to side, etc in a straight line...... Suggestions?

    Did you figure out your other problem (with getting x or y always 0)?
    Anyway, your slope should be the same for changing both x and y coordinates. Why do you have two slopes? You can't add slopes to x or y coordinates--that makes no sense.
    You have an object at (oldx, oldy).
    The user clicks on (newx, newy).
    The line between the points is:
    (y-oldy)/(x-oldx) = (newy - oldy)/(newx - oldx)Or (expressing y in terms of x):
    y = (((newy - oldy)/(newx - oldx))*(x - oldx)) + oldyOr:
    y = (((newy - oldy)/(newx - oldx))*(x)) + (oldy - ((newy - oldy)/(newx - oldx))*oldx)If you pick an x, you can calculate the matching y on that line. To move in n steps:
    x = oldx;
    x_n = oldx + (((newx - oldx)/n) * oldx);Put those x values in the equation for y, and you will get the corresponding y. Of course, you could just do the same as you did for x:
    y = oldy;
    y_n = oldy + (((newy - oldy)/n) * oldy);

  • Photo Merge now creates straight line merges...

    In the old days when I did a Photo Merge from Bridge I would find that the merged document would have multiple layers with masks that had quite irregular edges (as expected) and therefore smooth fills.  Ultimately PS produced really good panoramas with VERY LITTLE EFFORT required. 
    Sometime recently, and I'm not sure which CC update it was, this all stopped working and now my merges have straight line edges and sharp non-graduated fills.  Where the panoramas have straight lines in the shots or clear changes (like skylines) they jump at the merged edges and are not smooth.
    What has happened?  What am I  missing?  What new settings are required to use Photo Merge?  I have checked all the obvious places in both BridgeCC and PhotoshopCC 2014 and nowhere does it mention any new controls.  I have checked the various help videos and nowhere do they use any methods that I do not use.  Why do they get smooth transitions when I am not?
    Now I am using PSCC 2014 on a Windows 7 laptop with a smallish hard drive (SSD) and not a huge amount of room (20-30Gb drive available at most) but this wasn't a problem previously and even when I make more space available the problem persists.  Am I going to have to wait until I am home and have access to my desktop with 32Gb RAM and TB of available drive?  Hope that isn't the case as it will be 3 months away.
    Now if this website would allow me I would add a JPG of the PS window to show the problem but it won't let me upload the file even though it is less than the 4Mb limit in size.  Then we get back to entering this forum which required me to log-in to my Adobe ID 15 times before it let me start a discussion...

    I've finally managed to get a screen shot into this forum.
    I have deselected 2 of the frames to show the straight edges of the masks.
    Now zooming in to the right hand join we see the skyline has an abrupt join...

  • CS6 - Brush bug - randomly draws straight lines when sketching

    Hey everyone,
    I noticed this bug that occurs when I use the brush tool. Whenever I'm sketching in a small region, it randomly draws a straight line, as if I never lifted my pen. It's like when you hold the shift key to make a straight line, except I'm not holding the shift key. However, this only happens if I'm drawing semi-closely and/or if I'm drawing semi-fast (not that fast though. The lines will connect even though I lifted my pen. Does anyone know how to fix this problem? I updated my video card and tablet to its latest drivers but it hasn't fixed the issue.
    Specs:
    Windows 7 64 bit
    Wacom intuos5 tablet
    Nvidia GT 520 Graphics card
    Photoshop CS6
    Any help would be appreciated.

    Allso have this from time to time.
    The brush loses response and does little short straight lines here and there, it's a software glitch. I usually save my document when that happens, this usually snaps it out of it but a few times I had to wait then save again. I used to be able to just swap apps or click on layers or something but that doesn't work anymore.
    XP 32bit
    CS5 32bit
    I had the same promlem with CS4 trial, with my old Manhattan tablet and with my new Intuo's. I think it's a bug that comes in from time to time with panel, window focus changes. Or Id get up to fetch a cup of coffee and when I come back it's like that.

Maybe you are looking for