STRAND PROBLEM while connecting D2K with DB

Dear All,
For some reason I am unable to connect SQLPlus, Forms and Reports to my oracle 10g database. Everthing is in one machine which is dell with good configuration.
O/S: Windows XP DB: Oracle 10g Enterprise Edition D2K: Rel: 6.0
All have installed successfully. With in Net8 Easy Config & Net8 Assistant the service tests successfully but when I use the same string within Forms / Reports / Sqlplus it gives typical windows (microsoft) error with the following caption:
Oracle SQL*PLUS has encountered a problem and needs to close.
When I checked evenlog it has the error with following text:
"Faulting application plus80w.exe, version 0.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x000000d7"
Important Note: the same runtime of D2K is successfully connecting one other database (oracle 8i on sun soloaris) which resides in different machine and executing the application with no problems. On the other hand local 10g db is also connectable via its own sqlplus
Kindly assist me on this problem... Can versions of DB and D2K make difference!!!
Looking forward for your expert advices on the issue...Thanks
Regards,
Zia

Mr. Sybrand,
Thanks for the reply and I understood your point. Can you please further guide me to get an appropriate Oracle Forms/Reports (Developer) version in order to make application using Oracle Database 10g. Please note that most of my experience is in D2K 2000 rel:6. and unfortunately I came into software development after a long gap that is why not much aware about latest version out there of Oracle Forms/Reports.
But is there really no way to connect D2K rel:6 with DB 10g !!!
Regards,
Zia

Similar Messages

Facing problem while connecting N70 with bluetooth

I am connecting N70 with my laptop thru bluetooth. But im facing a error msg saying that hardware problem with MODEM.
do i need to install Modem & if so which one suitable.
all others application working thru bluetooth expect net connection.
description:
Window XP
Nokia PC suite letest one
thru blutooth.
plz suggest. Thanks

When one installed pcsuites successfully it installed all drivers including the modem, the reasons why it takes sometimes when one is prompted to connect the cable.
Try to uninstall pcsuite again & run the pcsuites cleaner afterwards then re-install pcsuite. Don't connect the cable until told to so & check. If it does fail again, make a backup & format your phone; is the firmware of your N70 the latest one?
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

MDM WebServices Problem while connecting to MDM repository

Hello,
we have installed the Web Services for MDM.
When I test the Services, say the MDMSearchRecords I always get a ERROR status and the Message:
id (String) WS_LogonProblem
severity (String) ERROR
text (String) Problem while connecting to MDM repository: z_Material on server: debmu416.server..... at port: 4000. Maybe the Repository-Information has not been set correctly at the requested query.
status (String) FAIL
The Repository Information I try to connect with is correct (Repository Name, Server Name, Port, data Language and schema Language).
Can you pls tell me where the problem could be?
Points will be generously rewarded!
Best Regards,
Mircea

Hi Arun,
Thanks a lot!
you were right! The WebServices version was too old.
Now I can connect to the Repository in Test mode.
I get some other error Messages, like "Field Material_Number is not defined at Table Products." and "Repository Data is not available in the requested Language ." which isn' right.
Do you have a clue where this could come from?
BR,
Mircea

Bluescreen while connecting iPad with PDF

Bluescreen while connecting iPad with PC. Message, Problems with Camera driver?

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

Problem in connecting JSP with Oracle 9i.

Hi,
I am having problem in connecting JSP with Oracle 9i.
I am using windows XP and my JDK version is 1.4. For executing JSP I am using
"jakarta-tomcat-5.5.4-preconfigured". My database name is global.
I have set java_home, j2ee_home, oracle_home, path, classpath as follows:
j2ee_home=c:\sun\appserver
java_home=c:\sun\appserver\jdk
oracle_home=C:\oracle\ora92
path=C:\Sun\AppServer\bin;C:\Sun\AppServer\jdk\bin;C:\oracle\ora92\bin
classpath=C:\Sun\AppServer\lib\j2ee.jar;C:\oracle\ora92\jdbc\lib\ojdbc14.jar;C:\oracle\ora92\jdbc\lib\nls_charse
t12.zip
My code is as follows:
<%@ page language="java" %>
<%@ page import ="java.sql.*"%>
<%
try
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
Connection conn = DriverManager.getConnection ("jdbc:oracle:oci8:@global", "scott", "tiger");
catch(SQLException e)
out.println(""+e);
out.println("Connected");
%>
I tried other program:
<%@ page language="java" %>
<%@ page import ="java.sql.*"%>
<%
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:global","scott","tiger");
out.println("Connected");
%>
I am getting following error:
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 5 in the jsp file: /jsp/oracle.jsp
Generated servlet error:
oracle.jdbc.OracleDriver cannot be resolved or is not a type
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Thanking you in advance,
Anurag

maneesh108 wrote:
hi this is maneesh1) Read the thread it has been answered.
2) The thread is very old. Don't resurrect old threads.
I'm locking this zombie thread.
Kaj

Problem while uploading data with GUI UPLOAD Function

Hi,
I am facing problem while uploading data with FM GUI UPLOAD in out text file there are 7 row but after the FM GUI UPLOAD there are 14 entries are coming in Internal table and each alternate row is coming as blank with 0000 in some column in internal table first row is proper and second line is blank so on.
what can be the problem .
The program in which we are using this we are using it from last 2 year but we are facing problem today only.
regards,
zafar

Hi,
The file formate is same as it is from last two years it is automatically generated by one another bar code server and there is no change in the file formate.
So waht can be the problem to check any inconsistancy in system i have develop a samll program fro uploading a text file with same function module , but it is working fine.
regards,
zafar

Problem while creating xml with cdata section

Hi,
I am facing problem while creating xml with cdata section in it. I am using Oracle 10.1.0.4.0 I am writing a stored procedure which accepts a set of input parameters and creates a xml document from them. The code snippet is as follows:
select xmlelement("DOCUMENTS",
xmlagg
(xmlelement
("DOCUMENT",
xmlforest
(m.document_name_txt as "DOCUMENT_NAME_TXT",
m.document_type_cd as "DOCUMENT_TYPE_CD",
'<![cdata[' || m.document_clob_data || ']]>' as "DOCUMENT_CLOB_DATA"
) from table(cast(msg_clob_data_arr as DOCUMENT_CLOB_TBL))m;
msg_clob_data_arr is an input parameter to procedure and DOCUMENT_CLOB_TBL is a pl/sql table of an object containing 3 attributes: first 2 being varchar2 and the 3rd one as CLOB. The xml document this query is generating is as follows:
<DOCUMENTS>
<DOCUMENT>
<DOCUMENT_NAME_TXT>TestName</DOCUMENT_NAME_TXT>
<DOCUMENT_TYPE_CD>BLOB</DOCUMENT_TYPE_CD>
<DOCUMENT_CLOB_DATA>
<![cdata[123456789012345678901234567890123456789012]]>
</DOCUMENT_CLOB_DATA>
</DOCUMENT>
</DOCUMENTS>
The problem is instead of <![cdata[....]]> xmlforest query is encoding everything to give < for cdata tag. How can I overcome this? Please help.

SQL> create or replace function XMLCDATA_10103 (elementName varchar2,
2                                             cdataValue varchar2)
3 return xmltype deterministic
4 as
5 begin
6     return xmltype('<' || elementName || '><![CDATA[' || cdataValue || ']]>
7 end;
8 /
Function created.
SQL> select xmlelement
2         (
3            "Row",
4            xmlcdata_10103('Junk','&<>!%$#&%*&$'),
5            xmlcdata_10103('Name',ENAME),
6            xmlelement("EMPID", EMPNO)
7         ).extract('/*')
8* from emp
SQL> /
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SMITH]]></Name>
<EMPID>7369</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ALLEN]]></Name>
<EMPID>7499</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[WARD]]></Name>
<EMPID>7521</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JONES]]></Name>
<EMPID>7566</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MARTIN]]></Name>
<EMPID>7654</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[BLAKE]]></Name>
<EMPID>7698</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[CLARK]]></Name>
<EMPID>7782</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SCOTT]]></Name>
<EMPID>7788</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[KING]]></Name>
<EMPID>7839</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[TURNER]]></Name>
<EMPID>7844</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ADAMS]]></Name>
<EMPID>7876</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JAMES]]></Name>
<EMPID>7900</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[FORD]]></Name>
<EMPID>7902</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MILLER]]></Name>
<EMPID>7934</EMPID>
</Row>
14 rows selected.
SQL>

Having problem while connecting to SQL Server through a application

hi guys ,
having one problem while connecting to the SQL SERVER 2008 R2 through a application (Dynamics NAV), by using the concept of Linked Server.
But one more thing , i am able to access that very SQL server through my app , when i am working locally , i mean to say that when i am working on the machine itself on which the server is installed then its working fine .
But when i am working on another system the query doesn't work.

by using the concept of Linked Server.
Why through a linked server and not directly as a simple remote connection? I don't think you app is aware of linked server.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Connection problem while connecting to LDAP resource via SSL

Hi,
I am facing problem in connecting LDAP via SSL. I got the self signed certificate from the LDAP team and while importing it to the JVM keystore using command "keytool -import -file PathTo/ds-cert.txt -keystore ./cacerts -storepass changeit -trustcacerts", I am getting error "keytool error: java.security.SignatureException: Signature does not match". Since I am not able to import the cert, I am facing problem in connetcing to LDAP via SSL. I have gone thru other posts and found some answers for it.. but not able to do it correctly. I am using SIM 7.1 and tomcat. In some posts, I have seen, in the resource config wizard, use "true" instead of 1 in the SSL field.. For SIM 7.1, does the value 1 work?. Please help me in importing the cert to my local JVM keystore.
Thanks.
Edited by: dj123 on Oct 15, 2008 1:50 PM

Make sure you are importing the certificate of the issuer (CA) that issued the LDAP certificate, not the LDAP cert itself.

I was facing problem while connecting to oracle database.Can some one help me soon!!!!!

Hi all,
I was facing problem from last week.Suddenly i was getting ora-12505 error while connecting to the database through toad.I tried to change tnsnames.ora & listener.ora in multiple ways,but no luck...Inspite i was getting different errors like ora - 01034: ORACLE not available / ora - 27101: shared memory realm does not exist...When i try to connect using sys / sys as sysdba,connection is establishing and when issue the command startup it was throwing the error ORA-01821: date format not recognized......Fed up solving these issues....Can some one help me out...It's very very urgent..
Thanks in advance,
pavankumar.

Well, the obviously solution is to use separate Apple ID's for iCloud.

Problem while reversing allocations with KEU5

Dear Experts,
we encounter some problems when reversing allocations with KEU5 (using KSU5 in the background). When doing so all 4 update processes will be occupied by the system on our 2 servers. Which means that the systems is blocked.
Thanks in advance for help and best regards
Melanie

SAP OSS Says the following
This is not a program
error and completely correct
behaviour. Nevertheless, I would like provide the following
recommendations which could possibly reduce workload/improve the
runtime in the transaction KEU5:
1. Please make sure that
the flag for 'detail list' is not activated.
If the option 'detailed list' is selected, a detailed output list is
created for every segment. This takes up the largest amount of time
during the process.
2. Ensure that the Summarization that you use are updated on a regular
basis, daily if possible.
3. Also consider the
cycles dimensions recommended by SAP (a maximum
of 50 segments per cycle, a maximum total of 10,000 sender-receiver
relationships, see documentation). If possible, enter only those
objects in the cycle that are valid senders or receivers. Consider
that if, for example, you entered 100 cost centers in a group of which
only 20 are valid receivers, the complete master data validation and
database selection is carried out for all 100. See note 79224 and
130350 for further information.
4. For the definition of segments and their summary in cycles, you
should take into account the technical aspects included in note 420081.
Please take into account that the selection of data is carried out
from CE3xxxx, CE4xxxx (no effect at this point if you have archived
CE1xxxx), as explained in note 420081.
The selection of the reference data can both be carried out from a
summarization level or from object level (tables CE3xxxx, CE4xxxx).
In additional , you are
recommended to perform
this transaction during the evening/night. This will affect the system
processes/workload during peak period.

Net_PRICE problem while creating PO with BAPI_PO_CREATE1 ***ASAP

Dear All,
While creating PO with bapi BAPI_PO_CREATE1, The net price is not populating, though the logic is correct, as when i change the net price to some otrher value of in the bapi, while debugging, it is taking the Net price, but in general run, the price is over written by Gross price in PO, Please Help, Its Urgent.
Any Sample codes are welcomed, where Net_price is used.
Thanks in Advance..
Rewards Guaranteed.

Dear All,
While creating PO with bapi BAPI_PO_CREATE1, The net price is not populating, though the logic is correct, as when i change the net price to some otrher value of in the bapi, while debugging, it is taking the Net price, but in general run, the price is over written by Gross price in PO, Please Help, Its Urgent.
Any Sample codes are welcomed, where Net_price is used.
Thanks in Advance..
Rewards Guaranteed.

Applet security problems while connecting with database

i hav problem in the japplet connecting with sql database
it gives security access denied error while running program as my driver is jdbc:odbc:bridge driver
so for resolving this error how can i turn off security of applet and also which security permission to be change?
plz reply

baftos wrote:
Maybe I should question the need to access a local database on the client PC.
But anyway, the normal way to obtain security clearance is to use a signed applet.
Another possibility is to grant the applet all permissions by modifying the security policy file of each client to grant your applet 'all permissions'. Note that in this case you must have access to each and every client PC or ask them to do so before running the applet.Database access at client's machine is ridiculous. I doubt this is what OP wants.
@OP: request you to post the original security issue and the environment details.
Thanks,
Mrityunjoy

Problem while Connecting with oracle thin driver

I have been trying for the past two days for connecting oracle 8.1.1.6 using thin driver. I set the classpath also. It throws me the following exception.
Exception in thread "main" java.sql.SQLException: Io exception: The Network Adap
ter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:323)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:260)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:365)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:177)
at Employee.main(Employee.java:23)
I am trying to acheive the connection using the following piece of code
Connection conn = DriverManager.getConnection ("jdbc:oracle:thin:@THIRU:1521:ORCL",
"scott", "tiger");
The problem lies in that piece of code only,
In the TNSNAMES.ora the entries are as follows.
THIRU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Thiru)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = thiru)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
How to solve this one. Can anybody tell me how to provide the proper url.
thanks in advance

You were very close.
"Thiru" as opposed to "THIRU" should be the name of the machine running the database, but that would imply that the DNS lookups are case sensitive, and we know that's not the case.
My guess, because the network adapter itself is reporting an error, is that "Thiru" evaluates to an IP address that isn't correct, that is, it's trying to make a connection to a specific address and getting nothing back in return.
Anyway, I think your program(s) are just fine, and your network is misconfigured. Incidently, it is always a good idea in cases like this to use the full name of the machine, for example...
...getConnection( "jdbc:oracle:thin:@thiru.maran1977.com:1521:ORCL"...
and in the database configuration itself...
(ADDRESS = (PROTOCOL = TCP)(HOST = thiru.maran1977.com)(PORT = 1521))
You may also use the IP address if you wish.

STRAND PROBLEM while connecting D2K with DB

Similar Messages

Maybe you are looking for