Strange 1 sec stop/pause every 3 sec on Neo2

I've got an annoying problem that is randomly showing up. The computer seems to completly stop/hang/pause for ~0.5-1 sec consequently every 3 sec. When I drag my mouse cursor slowly over the screen, I can see the pauses and hear the sound jumping in a loop, and then continue as normal...
This error is consistent until I either restart og go into standby. It shows up randomly, and can show up at any time in game or at the desktop.
I've tried to disable all OC features, disabled agressive timing, disabled FastWrites, disabled System Bios Cache, tried to set half memory speed.
This does not seem to happen in neither Fedora or WinXP x64.
I've searched the forum and googled, but nothing seems to match with my problem.
Can anybody help me?

Sounds like a software issue since your two other operating systems are unaffected. Try booting from your XP cd and go into the recovery console, type in "chkdsk /p". Once the system reboots, go to the run command, with your XP cd in, and type in "sfc/scannow". Also check for the following: spyware, viruses, and registry errors. Have you recently installed any new software or updated any drivers? Boot into safe mode and see if the problem exists, if not then it's probably a driver issue.

Similar Messages

TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.

We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got.

Why is Logic Express 8 keep stopping after 2 sec, every time I press play? Help!!!

Why is Logic Express 8 keep stopping after 2 sec, every time I press play? Help!!!

Its likely to be caused by Ozone5.. many people have reported that plugin is currently quite unstable and are awaiting updates from izotope to fix the problem... No ETA has been given by izotope for the fix however...
Also several of your plugins are out of date (Zebra2, Clariphonic, Ozone itself.. to name but a few,)
Finally, you are running an older version of Logic Pro X (10.0.3)...and I would normally suggest you update to the latest version but... if you have a USB2 audio interface do not update to 10.0.5 at this time.... unless you know it will work correctly with the new version of LPX.

Why does my keybord and mousepad stop responding every 10-20 sec?

why does my keybord and mousepad stop responding every 10-20 sek? lasting for a few seconds.
this is a new problem that started this friday.
what to do?

Try resseting the devices or changing the batteries. Also try restarting your MacBook. You should be shutting down every night.

Flash plugin plays for 2 to 10 secs then pauses and cannot resume

new website, pauses every 2 secs, you tube seems to last for 10 secs then pauses.
Flash Version 11.3.300.271
Firefox 14.0.1
This is getting old, either firefox fix this issue or give us other video options without flash and let adobe die!

I copied and pasted the same version. I only have one versin installed

SAPCCM4X.03 Windows Service stops after 3 sec.

Hi!
I would like to set up the SAPCCM4X agent on the satellite system.
The installation with the commando >sapccm4x -R pf=... endes without any errors.
The problem is that the appropriate SAPCCM4X.03 Windows Service stops after 3 sec.
The output on the CMD console is:
INFO: trying to register service SAPCCM4X.03 at Windows Service Control Manager
starttype of service:             manual/[auto] :
DomainName\UserName or [<LocalSystem account>] :
INFO: Agent is running (no actual pid, but actual shared memory!)
WARNING: Service SAPCCM4X.03 already stopped. But agent is running!
WARNING: The following service is registered but could not be started
SAPCCM4X.03
(command ["E:\usr\sap\SC3\SYS\exe\run\sapccm4x.exe" -Service
pf=E:\usr\sap\SC3\SYS\profile\SC3_DVEBMGS03_VMSAP01]   user <LocalSystem account>)
INFO: Updated config file E:\usr\sap\SC3\DVEBMGS03\log\sapccm4x\csmconf.
EXITING with code 0
How can I solve this problem?
Thank you
Ju00FCrgen

Hello Jürgen,
WARNING: Service SAPCCM4X.03 already stopped. But agent is running!
you could try to clean up the part of the shared memory used by the agent:
sapccm4x pf=<instance profile> -initshm
Maybe the agent starts afterwards.
Regards, Michael

Videos stop after 10 sec. How to remedy

Just got Iphone 4s the past Friday. Videos start then stop after 10 sec. Tap play then stops after 1 sec. Will not play more than 1 sec. Solutions?

It seems that the work-around for this is to change the compatability mode to "Vista". Right click on shortcut, select properties, then the Compatability tab and enable Vista compatability.
Don't know why this was happening but this seems to fix it.

Time Capsule refuses to download upgrade? Stops after 5 sec....?

Cannot backup to my Time Capsule.
Time Capsule requiers upgrade, but refuses to download it?? Stops after 5 sec. and blames Air Port tool???

What model TC is it? A1xxx from the base please.
How is it setup in the network?
What kind of internet do you have?
I would say any TC older than 3years do not upgrade firmware.. it will not solve your problem of not being able to backup anyway.
Pull the TC out of the network and do a factory reset. Use connection by ethenet, to redo the setup.. if at all possible setup and connect by ethernet whilst you do the backup.
But need more info to help further.

.MP$ Video pauses every 15 seconds

I've been playing movies on my new ipod.
At the start there was an occasional pause followed by video with no audio.
Now, it will start off fine (video and audio) but will pause every 15 sec or so and continue without audio (unless I fast forward or rewind a bit). It's quite annoying when watching a movie.
It seems like something to do with the buffer. ie the buffer runs out and when re-reading the HD, will not get audio.
Has anyone expericened this before?

Are you using the new v1.1 firmware? If so, revert back to 1.0. Alot of 60GB users have experienced the same problem you're describing after upgrading the firmware. Most 30GB models seem fine, so it might be a problem of the new firmware not managing the 60GB's RAM properly (it has a different configuration than the 30GB), as the problem seems to occur when the HD spins up to cache more data.

Incomng and Outgoing calls are stop routing every five min

Dear Team,
Please find the attached running config and logs.Incoming and outgoing calls are landing on the gateway properly. But call stop working every five min.PRI is up and no error on controller E1.
Please advise how to identify the issue?
CUCM version 4.2
debug isdn q921
*Sep 2 08:48:21.874: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=2 nr=34
*Sep 2 08:48:21.890: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=3
*Sep 2 08:48:21.942: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=34 nr=3
*Sep 2 08:48:21.942: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=35
*Sep 2 08:48:27.866: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=35 nr=3
*Sep 2 08:48:27.866: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=36
*Sep 2 08:48:34.322: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=36 nr=3
*Sep 2 08:48:34.322: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=37
*Sep 2 08:48:34.326: %ISDN-6-CONNECT: Interface Serial0/0/1:27 is now connected to 0503726912 N/A
*Sep 2 08:48:34.326: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=3 nr=37
*Sep 2 08:48:34.342: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=4
*Sep 2 08:48:39.694: %ISDN-6-DISCONNECT: Interface Serial0/0/1:29 disconnected from 0094777382372 , call lasted 181 seconds
*Sep 2 08:48:39.698: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=4 nr=37
*Sep 2 08:48:39.706: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=5
*Sep 2 08:48:39.730: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=37 nr=5
*Sep 2 08:48:39.730: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=38
*Sep 2 08:48:39.734: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=5 nr=38
*Sep 2 08:48:39.746: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 voice-port 0/1/2
*Sep 2 08:48:49.746: ISDN Se0/0/1:15 Q921: User TX -> RRp sapi=0 tei=0 nr=38
*Sep 2 08:48:49.758: ISDN Se0/0/1:15 Q921: User RX <- RRf sapi=0 tei=0 nrsh
*Sep 2 08:48:59.762: ISDN Se0/0/1:15 Q921: User TX -> RRp sapi=0 tei=0 nr=38
*Sep 2 08:48:59.766: ISDN Se0/0/1:15 Q921: User RX <- RRf sapi=0 tei=0 nr
*Sep 2 08:49:01.946: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=38 nr=6
*Sep 2 08:49:01.950: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=39
*Sep 2 08:49:01.950: %ISDN-6-DISCONNECT: Interface Serial0/0/1:27 disconnected from 0503726912 , call lasted 27 seconds
Voice-Gw#
Voice-Gw#
Voice-Gw#
Voice-Gw#
*Sep 2 08:49:01.954: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=6 nr=39
*Sep 2 08:49:01.962: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=7
*Sep 2 08:49:02.034: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=39 nr=7
*Sep 2 08:49:02.034: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=40
controller E1 0/0/1
pri-group timeslots 1-31
interface Serial0/0/1:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
=======================
Voice-Gw#
*Sep 2 08:55:25.214: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=71 nr=27
*Sep 2 08:55:25.214: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=72
*Sep 2 08:55:25.234: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=27 nr=72
*Sep 2 08:55:25.246: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=28 nr=72
*Sep 2 08:55:25.250: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=28
*Sep 2 08:55:25.258: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=29
*Sep 2 08:55:27.518: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=72 nr=29
*Sep 2 08:55:27.518: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=73
*Sep 2 08:55:27.522: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=29 nr=73
*Sep 2 08:55:27.534: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=30
*Sep 2 08:55:27.546: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=73 nr=30
*Sep 2 08:55:27.546: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=74
*Sep 2 08:55:33.318: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=30 nr=74
*Sep 2 08:55:33.330: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=31
*Sep 2 08:55:33.390: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=74 nr=31
*Sep 2 08:55:33.394: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=75
*Sep 2 08:55:37.190: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=75 nr=31
*Sep 2 08:55:37.194: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=76
*Sep 2 08:55:38.534: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=76 nr=31
*Sep 2 08:55:38.534: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=77
*Sep 2 08:55:38.538: %ISDN-6-CONNECT: Interface Serial0/0/1:27 is now connected to 0504312690 N/A
*Sep 2 08:55:38.538: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=31 nr=77
*Sep 2 08:55:38.554: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=32
*Sep 2 08:55:42.542: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=32 nr=77
*Sep 2 08:55:42.554: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=33
*Sep 2 08:55:42.606: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=77 nr=33
*Sep 2 08:55:42.606: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=78
*Sep 2 08:55:46.766: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=78 nr=3
% Invalid input detected at '^' marker.
Voice-Gw#sh controllers e1 0/0/1
E1 0/0/1 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20060711, FPGA: 13, spm_count = 0
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
CRC Threshold is 320. Reported from firmware is 320.
Data in current interval (99 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Voice-Gw#
Voice-Gw(config)#do sh isdn statu
Global ISDN Switchtype = primary-net5
ISDN Serial0/0/0:15 interface
        dsl 0, interface ISDN Switchtype = primary-net5
    Layer 1 Status:
        DEACTIVATED
    Layer 2 Status:
        TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
    Layer 3 Status:
        0 Active Layer 3 Call(s)
    Active dsl 0 CCBs = 0
    The Free Channel Mask: 0x00000000
    Number of L2 Discards = 0, L2 Session ID = 0
ISDN Serial0/0/1:15 interface
        dsl 1, interface ISDN Switchtype = primary-net5
    Layer 1 Status:
        ACTIVE
    Layer 2 Status:
        TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
    Layer 3 Status:
        3 Active Layer 3 Call(s)
        CCB:callid=E3C0, sapi=0, ces=0, B-chan=30, calltype=VOICE
        CCB:callid=E3C6, sapi=0, ces=0, B-chan=31, calltype=VOICE
        CCB:callid=E3CB, sapi=0, ces=0, B-chan=29, calltype=VOICE
    Active dsl 1 CCBs = 3
    The Free Channel Mask: 0x8FFF7FFF
    Number of L2 Discards = 0, L2 Session ID = 2
    Total Allocated ISDN CCBs = 3

Hi.
Can you please also attach a CUCM trace during a disconnected call?
Thanks
Regards
Carlo

Can You Get iPod To Stop/Pause At The End Of Each Track

I really need my iPod to stop/pause at the end of each track/song, but it insists on playing right through a playlist one song after another. Does anybody know if there is a way of achieving this, there doesn't seem to be anything in the manuals about this. My iPod is new and is the 60GB color screen model. Any help would be much appreciated.
Thanks, Peter.

Hi boaster, is this an apple accessory, or where else will I find one? When you say there will be some manual intervention, I presume you have to press the button to actually stop it at the end of each track??
Dave W. I've tried your suggestion and it works fine. Its also good because it keeps iPod within the correct playlist. The original suggestion of one track per playlist also works, but unfortuanatly iPod defaults to go back to the main menu at the end of every playlist so you then have to navigate back to where you need to be. Dave, it looks like your suggestion is the answer at the moment, many thanks, although would like to know more about this 'airclick' remote please. Cheers.

Mouse pauses every 2.5 seconds

Got a brand new 27 inch 3.06 Ghz Core 2 Duo iMac (2009). The magic mouse AND any USB mouse that I plug into it pauses at the same interval about every 2.5 seconds. It's just enough to screw up everything you are trying to do.
Tinkering with it, I have managed to figure out that it only does it when I use an external monitor plugged into the iMac...
I have an external 24 inch monitor plugged into the iMac to extend my desktop. The external monitor has 2 inputs (DVI and VGA). When I have both the iMac and the 24 inch monitor set to Mac (DVI), the mouse works just fine. But when the external monitor is set on the Windows machine (VGA), the mac mouse (Magic mouse or USB mouse) pauses every 2.5 seconds. I don't know why monitor input settings would cause the mouse to pause and I haven't seen any threads with the same problem. Any ideas?

The 27-inch iMac is the first (and only) Mac to make double-use of its video port.
I think you have already shown it is somehow related to the Mini DisplayPort, and you can easily reproduce the problem on-demand. Since Mac OS X still sees the second display, even when it is switched over to the VGA input, it may not be related to the new video input capability.
As a test, what happens if you put it into the state where the pausing is going on, then disconnect the adapter on the back of the iMac. I would assume iMac would pause for a second and reset to having only its built-in display, and the ongoing pausing issue would stop. Then, reconnect the adapter (display still set to VGA with active input). The iMac should reset to having the external display. Does the pausing issue start happening again?
Here's another test. With the display set to DVI, insert the Mac OS X installation disc and restart with the C key held down. This will force start up from the optical drive. When you get to Installer, you should see the default Desktop background on the external display, and that will indicate it is being recognized and used. You should be able to move your mouse cursor onto it, although the arrangement may be different. Now, do the thing that usually causes the pausing. When you are started up from a different system, does the pausing still occur?

My Radio on my Nano won't pick up a signal.. I cennected my headphones and am in the middle of the city. Also my iPod keeps pausing every like 30 seconds.. What do I do?

My Radio on my Nano won't pick up a signal.. I cennected my headphones and am in the middle of the city, so there are plenty of stations to find. Also my iPod keeps pausing every like 30 seconds when I try to listen to my music. I just got it for Christmas and already loaded it with songs.. What do I do?

Push the headphone jack all the way in, you don't have it fully plugged in yet.

ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide

iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

ITunes 11 will no longer rewind in stop/pause mode !

iTunes used to be able to rewind while in stop/pause mode : alt cmd arrow left would rewind 5 seconds.
I use it on a daily basis for transcribing music.
Now, I suppose because of iTunes 11 (or is it Mountain Lion..?) rewind is only possible in play mode !! (while the song is playing..)
Is there anyone who can help me , or has a solution to fix this problem ?
Thanks !
Carlo

Here is the log. Looks like its QT is crashing it. So, again, its either QT, or one of the Vista updates. I haven't tried to watch a movie on the computer in awhile so I have no idea what update in the past few months is causing the problem.
Log Name: Application
Source: Application Error
Date: 2/11/2009 4:08:29 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: OU812
Description:
Faulting application iTunes.exe, version 8.0.2.20, time stamp 0x4925c4fe, faulting module QuickTimeH264.qtx, version 7.55.90.70, time stamp 0x49011c68, exception code 0xc0000005, fault offset 0x00073570, process id 0x159c, application start time 0x01c98c8ac9ea815b.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-02-11T21:08:29.000Z" />
<EventRecordID>17730</EventRecordID>
<Channel>Application</Channel>
<Computer>OU812</Computer>
<Security />
</System>
<EventData>
<Data>iTunes.exe</Data>
<Data>8.0.2.20</Data>
<Data>4925c4fe</Data>
<Data>QuickTimeH264.qtx</Data>
<Data>7.55.90.70</Data>
<Data>49011c68</Data>
<Data>c0000005</Data>
<Data>00073570</Data>
<Data>159c</Data>
<Data>01c98c8ac9ea815b</Data>
</EventData>
</Event>

Strange 1 sec stop/pause every 3 sec on Neo2

Similar Messages

Maybe you are looking for