Strange activity with regular weekly clone backup.
This morning I tried to make a regular clone backup of my internal HD (320 GB). "About This Mac" shows I have used about 46 GB on the Internal HD. My DataBackup (ProSoft Engr) reported failure several times because of trying to backup more than 300 GB to my 250 GB Ext. Firewire drive.
I checked and I have the latest versions of Mavericks and DataBackup.
Any ideas?
Thanks,
-Joe
I can, but it's not going to help you, because it contains nothing more than I've already reported.
Fri Mar 20 12:00:19 2009
Setting recovery target incarnation to 2
Fri Mar 20 12:00:19 2009
Assigning activation ID 2226383392 (0x84b3ea20)
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=15, OS id=3064
ARC1 started with pid=16, OS id=6516
ARC2 started with pid=17, OS id=692
Fri Mar 20 12:00:19 2009
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3 started with pid=18, OS id=6052
Fri Mar 20 12:00:20 2009
ARC3: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: C:\MYDB\LOG1A.RDO
Current log# 1 seq# 1 mem# 1: C:\MYDB\LOG1B.RDO
Successful open of redo thread 1
Fri Mar 20 12:00:20 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Fri Mar 20 12:00:20 2009
ARC3: Becoming the heartbeat ARCH
Fri Mar 20 12:00:20 2009
SMON: enabling cache recovery
Fri Mar 20 12:00:21 2009
Errors in file c:\oracle\product\10.2.0\admin\MYDB\udump\MYDB_ora_2456.trc:
ORA-01173: data dictionary indicates missing data file from system tablespace
Fri Mar 20 12:00:21 2009
Error 1173 happened during db open, shutting down database
USER: terminating instance due to error 1173
Fri Mar 20 12:00:21 2009
Errors in file c:\oracle\product\10.2.0\admin\MYDB\bdump\MYDB_pmon_6132.trc:
ORA-01173: data dictionary indicates missing data file from system tablespace
Fri Mar 20 12:00:21 2009
Errors in file c:\oracle\product\10.2.0\admin\MYDB\bdump\MYDB_reco_6480.trc:
ORA-01173: data dictionary indicates missing data file from system tablespace
Similar Messages
-
Strange activity with one contact?
I noticed that whenever I sign on, if i stare at my contact list a certain person would go "offline" (if they were online) within a few seconds.
If I set my status from "online" to "invisible," this person immediately becomes "online" again. I doubt the person is manually doing this because it's been going on for a week and it's too consistent.
If I stay "invisible" then after a minute the contact also goes "offline" as well, regardless of if I'm invisible or "online."
Any idea what's going on?Hi, bobsmith12312, and welcome to the Community,
The "presence" function has been undergoing significant changes. Please see this blog article for background information:
http://community.skype.com/t5/News-and-Announcements/UPDATED-Changes-to-your-Skype-online-status/ba-...
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
Strange problem with virtual machines backup (Hyper-V 2012R2)
Hi
I have a strange problem with backup of virtual machines in one of my Hyper-V environments. Let me describe how does it looks like: There are two physical servers - HP DL360 G8. They are used as hosts for four virtual machines - domain controllers in two domains.
Each of them runs one DC in every domain. I've configured backup "inside" every virtual machine (with Windows Server Backup tool), in its operating system, because domain controllers should have their system state, regularly backuped, etc. Backup
is made on the network share - all machines to the same server as destination. And now the case - two virtual server are backuped as expected - the operation takes 3 - 4 minutes and is always succeded. But in case of two remaining it looks as below:
- Backup operation starts (is scheduled).
- Volume shadow copy is made.
- The first partition of VM starts to be copied. It's Windows 2012 R2 Generation2 VM, so it has EFI, Recovery and C: partition. EFI is as first and at this moment backup stucks for a 2-3 hours! Progress of copying is 0%. After for example 3 hours this partition
is completed and starts the next (disk C:). And again - it freezes for a few hours and suddenly is pushed. As a result the backup is made successfully, but it takes for example 10 hours.
Both "dodgy" VMs are on separated hosts. All four of them were installed in the same time. I tried to change destination to locally connected disk, but no result. It's interesting as well, that after rebooting VM, the first backup is made normally,
but every next has described problem again. In EventLog I can't find any errors, I don't know how to diagnose such case precisely, etc. Have you got idea what can cause such behaviour or where on the server should I look for some hints?
Thanks
MarcinHi Marcin,
>>that after rebooting VM, the first backup is made normally, but every next has described problem again.
It shouldn't happen .
To narrow this issue down , Please try to backup an Gen1 VM and check the result .
Best Regards
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
My ipad is hung with the dialogue box saying "this iPad hasn't been backed up in 4 weeks. Backup happen when this iPad is plugged in, locked and connected to WiFi". Even after doing that, I am not able to do anything with the iPad - neither able to reboot nor able to get to the homescreen. The dialogue box doesn't go at all even after pressing OK a hundred times. I treid tacking the back up through itunes and through 3G conncetion but of no avail. Please help
I too have been having this issue since about 12/14. That is around the same time I got the Ipad for my kids. I am unsure if it is related. I have tried logging out of icloud/deleting it and trying again. Removing most of the apps to sync. I reset my router. All of the attempts have produced zero results. I will be anxiously watching this thread for some help. Good luck to you also
-
i've backup in itunes with another phone number activation , now i want active with new phone number without losing old backups , what can i do for this problem ??
If I get this right, you've ported your phone number to AT&T with the purchase of the iPhone. That is considered opening your own account under your name. Your brother's account is not ported to AT&T unless you used his SS# instead of yours. Your brother still has his account under Verizon Wireless, all you did was use your cell phone number to when you opened your own AT&T account.
If you don't want to use your Verizon Wireless phone #, my suggestion is to call AT&T customer service and explain that you want a new phone number instead of the ported Verizon number. -
My ipad just froze on me with an error message "this ipad hasn't been backed up for 2 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi. All this has been done including trying to backup via itunes (on my PC). all this still doesn't solve the problem. Anyone have a possible solution?
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: You must hold both buttons down together. -
My Ipad is locked with a message This IPAD hasn't been backed up in 2 weeks. Backups happen when this IPAD is plugged in, locked, and connected to Wifi. I have connected to wifi and the error message remains. Cannot power off because screen is locked
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: You must hold both buttons down together. -
I have problem with my IPAD2, there is meesage that IPAD hasn;t been backed up in 1 weeks. Backups happen when this IPAD is plugged in, locked, and connected to Wi-Fi. And then I press OK below those message, but nothing happen and can't do anything too. I push start button, they appear but still "can't reach them". Anybody knows how to fix it back to normal?
Go to Settings, iCloud, and then Storage and Backup. You will then see a button to backup your iPad. It may be that you have much stuff (i.e. photos, apps) for it to do a full backup but you will be able to tell what the estimated backup should be and what it will consist of so that you can choose to prune down items. If you don't want to backup and get rid of the messages you can just turn backup off from this area as well.
-
my ipad has locked with the note " this ipad hasn't been backed up in two weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi.............I dont have a lock on it but i cant get rid of the above message bow to allow me access to back-up as requested. Any ideas?
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use the device again -
My ipad is froze with the message iCloud Backup This ipad hasn't been backed up in 2 weeks etc. I have connected it to iTunes on my laptop but still froze...suggestions?
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use it again -
Locked up with iCloud message about backups not done in 4 weeks
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo. -
Hi
My IPad is frozen - I cannot do anything. It has the following message - iCloud Backup - This ipad hasn't been backed up in 3 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi_FI. OK but when I press OK nothing happens. Please help.Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
Ever since updating to 10.4.11 a lot of strange things have started to happen on my miniG4
too numerous to get into .Like an idiot I have never backed up my system ( I don't use it for work, I'm not in school) so I think it is time to do an "erase and install".I do have lots of 3rd
party programs I would to hang on to so I'll copy them all to DVD. Here is my question: Do I need to make a bootable clone of my startup disk? I have tried to repair my HDD with fsck
disk utility an even tried AppleJack all with no success at correcting all the peccadillos that have started plaguing me.I have my apple installation DVD's but how can I do this and preserve my network prefs. etc? I have been a mac user for 8 years with no problems until recently,so I'm really inept at troubleshooting.Could someone give me a few tips on what to do here ? I would like to say that the few minor problems I've had I got answers to by reading the forums but this seems like a big thing. I welcome any and all sound advice and
Thanks,
TimThere's no point cloning your current system because it is already corrupt. However, once you reinstall it would be a good idea to clone the new system while it's still in working order. Here's some appropriate information:
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Intego Personal Backup (Commercial)
9. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete FireWire drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
You can also clone using third-party backup software such as those I have recommended above.
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.6.1 is Leopard compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com. -
On 11/1/2011, Time Machine (TM) terminated with an error message I did not record. I noted that the drive was full and decided to do a separate complete bootable system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean. Part way through the full system backup CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". That was about the time that TM malfunctioned, so I assumed they were related. After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours. I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume. I also erased and reformatted the TM volume. However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume". I restarted the computer with no change in results. Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup. I ran Techtool and no problems were found.
I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive. My hard drive is only about half full at 246 GB. My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours. I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination. As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty. As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing. Now my question would have to be - what could possiibly have happened to make it perform this way? It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.jcm21 wrote:
CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
"Unable to complete backup. An error occurred while copying files to the backup volume".
One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like). See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem); and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions. -
Having issues with my Time Machine backups...
my mid-2009 MacBook Pro seems to be having an issue with time machine.
I have an external, 1TB western digital harddrive that I used for my backups. it's about a year old. last weekend I took the harddrive with me on a trip - I kept it inside it's own neoprene case that was in my backpack for the entire weekend. the drive functioned without issue afterwards for almost a week.
then, last Friday, it wouldn't complete a backup. I wasn't sure what the issue was so I (foolishly) erased the drive and just began again as a new TM. now it's still having issues backing up.
I've tried repairing the disk permissions of my internal drive, and that actually seemed to help the TM complete a backup.
usually it will just stop backing up, and sit there for ages without doing anything. I choose "skip this backup" in order to end it, and then try to force another backup right after. the problem, then, is that it will start but won't do much after it reaches 4kb backed up or 23kb. that's not a typo - it really says kilobytes!!
not sure what the issue is at all, or how I can fix it. I have completed a backup since I erased the drive, but it's doesn't seem to want to carry on with regularly scheduled backups.
is it an issue with the time machine harddrive, or something deeper with my computer? are the backups that I have done safe? as I said, I was able to perform an initial backup after I erased the drive... if I end up replacing this computer, will I still be able to restore from the back up?These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Maybe you are looking for
-
IPad with an external videocam?
why is it not possible to make videos with ipad with an external videocam (using ipad as an online-monitor)?????? or ist it????
-
Problem in process instances Archiving using NetWeaver (CE 7.2)
Hi, I'm configuring the process instances Archiving using NetWeaver Composition Enviornment 7.2. I followed the document "Process Archiving using NetWeaver Business Process Management". http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e099ee21-
-
Conditionally capturing certain data while continuously acquiring data
In case my question has totally confused you, let me describe the situation, a general one which I'm sure some of you have already tackled. Suppose you're acquiring data from several channels (let's say two waveforms). And you only want to capture th
-
Hi, I am using OC4J as web container and Oracle 8i database on Sun solaris. I am using following scheme to access database connection. I have one Properties file that carries information about the driver,url,user and password I have one class RDBMSer
-
Hi Gurus, Can any one help me out how can I be able to print the counter of invoice details for a check in the output of the report. I am having a report where there are 2 repetitive frames one for check number and other for invoice number. --> After