Strange audio on freeze frames that won't go away?

So i create freeze frames, then when i play the 4-sec frame it makes a strange noise like a tape rewinding and this noise doesn't go away if i record a voiceover.
I can't mute it either because according to my macbook there is no noise.
And the sound jumps, so 4 seconds of audio is taken out from the following clip and the audio for the all the clips is moved by 4 seconds.
Any help would be so welcome, thanks.

Oh and i got a photo from iPhoto, added it to the end of the project library and miraculously the noise had gone, i then added a voice over.
But then when i moved it to a different place (inbetween 2 clips) the noise came back.

Similar Messages

  • Cp 4 and frames that won't go away

    Hey all!
    Weird question here.  I am splitting up a CP 4 project that is waaaay too large (24,00 frames) that was imported from CP 1.  I saved a copy of the project, renamed it, and deleted the slides I am dumping from this new, smaller part of teh project.  I saved.  I went into the library and dumped unused elements.  I saved.  I closed the project, and even closed Cp. Upon re-entering, I still have 24,000 frames in the saved and edited instance.  You cannot see anything that I deleted, but frame count does not change.  Weird.
    What kind of voodoo dance do I have to do to get the frames to go away?
    Thanks all
    nuguy

    Hello Nuguy,
    Those are indeed frames in the same sense as in Flash, but for the total project. If you did not change the standard settings the speed of the CP-movie is 30 fps (frames/second) and you will see that the total time (p.e. 00:50) multiplied with the frame rate (30) results in this total number (1550). But in routine work with CP, you do not really work frame by frame, as in Flash. The timeline is not in frames but in seconds (different from Flash).
    I'm not a Flash guru at all, a little bit more used to Captivate because it delivers e-learning in a fraction of time need otherwise in Flash.
    Enjoy CP,
    Lilybiri

  • Audio Artefacts / Freeze Frames post-Onlining?

    Hi all,
    Am experiencing some issues with my captured clips in FCP... might not be an FCP or hardware problem, but would like some advice.
    1) Recently, I've noticed that audio artefacts have been appearing in the audio of clips I've captured [DV footage from a DV camera, shot on new Sony MiniDV tapes, through a Firewire 400, sometimes using the same camera that shot the footage, through 'Offline Photo JPEG' and also 'DV25PAL']. There will be the occasional but noticeable 1 or 2 frames of audio distortion, whereas the rest of the audio is perfectly fine.
    Incidentally, I've just finished reading 'Optimizing Your Final Cut System' from the Apple Pro series of training books - really useful stuff - and their audio troubleshooting section doesn't help in my situation.
    It's not a settings problem - it was shot on 48kHz, 16 bit and captured as such. I've listened to the source tape - it's clean. The sequence is set for 48kHz and 16bit [plus, apart from the very random audio kink, the rest of the audio is fine].
    I've tried recapturing the offending clips but the audio distortion will just occur in another section instead. Hmmm...
    The only suspicion I have now is that the Firewire cable is wonky. Do you guys have any other suggestions? And if it's a Firewire issue [mine's a regular $10 cable bought from an electronics store] - any tips on picking a reliable Firewire cable?
    2) A little question on smooth onlining [Ken Stone's website has done a good job of providing the tips and tricks... but there's just one thing I'm still curious about...] I realized that if I online using the process detailed here: http://www.kenstone.net/fcphomepage/basic_onliningjordan.html , I still face problems with freeze frames that I'd made - the corresponding footage that the freeze frame was taken from wasn't automatically selected and up-rezed by Media Manager.
    Apart from going back and capturing the freeze frame footage manually or bringing it out to Photoshop and then bringing it in again, is there anything else I can do when preparing my offline sequence for online?
    I'm currently editing with FCP 5.1.1 on a Powerbook G4.
    Powerbook G4   Mac OS X (10.4.7)   Final Cut Pro 5.1.1

    ON the audio issue: are you finding the problem with a single track or do you have multiple audio tracks? I've seen some problems that were eliminated by "mixdown" of audio tracks in a project.
    If video is fine and audio is not, the cable is not a good suspect - general data corruption would be in both, I think. It's possibly an RT problem; maybe your system is too slow?
    Just some ideas.

  • I'm getting mdmclient error that won't go away

    I restored my computer yesterday and it was working fine.  This morning after booting, I am now recieving an error messag that won't go away even when I click 'Ignore'
    Below are the details when I click 'Report...'
    Process:         mdmclient [2736]
    Path:            /usr/libexec/mdmclient
    Identifier:      mdmclient
    Version:         1.6 (520)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [273]
    User ID:         501
    Date/Time:       2013-01-14 11:12:37.422 -0700
    OS Version:      Mac OS X 10.8.2 (12C60)
    Report Version:  10
    Sleep/Wake UUID: 8691BEB3-4C2A-4ED1-9E8B-FAD122CCF685
    Interval Since Last Report:          1304923 sec
    Crashes Since Last Report:           17472
    Per-App Crashes Since Last Report:   164
    Anonymous UUID:                      5EB6D6FB-1718-D922-77A4-19931C576C6F
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/ConfigurationProfiles.framework/Versions/A/Co nfigurationProfiles
      Referenced from: /usr/libexec/mdmclient
      Reason: image not found
    Binary Images:
           0x100032000 -        0x10006efff  mdmclient (1.6 - 520) <E228B3E9-A4D7-390D-A318-B3487E890F21> /usr/libexec/mdmclient
        0x7fff5fc32000 -     0x7fff5fc6693f  dyld (210.2.3) <36CAA36E-72BC-3E48-96D9-B96A2DF77730> /usr/lib/dyld
        0x7fff8c7da000 -     0x7fff8c92bfff  com.apple.audio.toolbox.AudioToolbox (1.8 - 1.8) <833DA682-A3C1-39E7-AEC3-9EDC734DE2A9> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
        0x7fff8dee0000 -     0x7fff8e23cfff  com.apple.Foundation (6.8 - 945.11) <A5D41956-A354-3ACC-9355-BE200072223B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    Model: MacBookPro6,1, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.57f17
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.22)
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 2 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Network Service: Parallels Host-Only #1, Ethernet, vnic1
    Serial ATA Device: ST9500325ASG, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS23N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 6
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Backup+ Desk, 0x0bc2  (Seagate LLC), 0xa0a4, 0xfd140000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

    I FIXED IT.
    The issue was a folder name.  For some reason, a folder was name Fersions when it should have been called Version.  I have no clue why it was named that way, but I named it correctly and the error disappeared.

  • HT1527 when I try to download apps in my iphone , i get a spinning circle that won't go away and a icon that is gray and says "waiting". Any ideas how to solve?

    When I try to download apps in my iphone , I get a spinning circle that won't go away and a grey icon that says "waiting" .Any ideas how to fix the problem?

    First go into settings, Itunes and App store,  sign out and then sign in again! (This might not work)

  • Have a number badge in settings that won't go away and there are no updates that need to be done.  Help!!!

    On my settings, there is a number one (red) that won't go away.  There are no updates that need to be done.

    Maybe you should try updating 5.1.1 from iTunes? Because I had the same thing and it was 5.0.1.

  • When I try to go to the app store, I have a popup for a game that won't go away.  I can't get it off the screen. Suggestions?

    When I try to go to the app store, I have a popup for a free game that won't go away.  I can't get into the app store.

    This happened to me twice lately.  I finally got around it by double tapping the home key to go back to the homepage finding the app store that was running and flicked  it up to get rid of it.
    When I went back to the App Store the Popup was gone.

  • HT4059 I have a "call out" window that won't go away.  It's there no matter where I go in iBook, my library, all my books etc.  what can I do about it?

    I have a "call-out" that won't go away.  It's there no matter where I go, or what I do within iBook, be it my library, or other books.  How can I get it to go away?

    Have you tried turning your phone off and back on?
    Reset the phone hold the home button and the sleep button in until the phone turns off ignore the "slide to power off" message and keep holding the buttons, the phone will reboot

  • Strange file in trash that won't go away?

    I have a strange file that appeared in my Trash the other day. I tried to empty the trash multiple times, but it won't go away. Secure empty trash doesn't help, as it just gets stuck. Double-clicking on the file, getting info on the file, or dragging the file out of the trash just results in the item disappearing, only to reappear shortly thereafter. Here is a screenshot of the filename, as it is very strange (I am posting it as a picture so there are no font issues):
    Click on the image if it doesn't appear.
    I have no idea what's going on. I tried repairing permissions to no avail. Should I run a disk utility such as Techtool or Diskwarrior? Is this a virus? Could this be related to my weird Time Machine issues (where Time Machine will come up with an error, see below for picture)?
    Click on the image if it doesn't appear.

    from Apple docs worked for me. Mine was \\\\\\\.\\\ derived from installing Windows.
    If there are several locked files in the Trash, you can unlock them all at the same time at the command line. Follow these steps:
    1. Open Terminal. It's located in /Applications/Utilities.

Type: chflags -R nouchg 
Note: Type one space (not pictured) after nouchg in the line above, so that it ends in "nouchg ". Do not press Return yet.

    2. Double-click the Trash icon in the Dock to reveal the contents of the Trash. If necessary, arrange the Finder window so that a portion of the Terminal window is still visible.
    3. Press the Command-A key combination to select all files in the Trash.
    4. Drag the files from the Trash to the Terminal window. 
Note: This automatically enters the pathname for each file. This eliminates the need to individually empty multiple Trash directories, particularly when multiple disks or volumes are present.

    5. Press Return. No special text message will be shown indicating that the command was successful.
    6. Empty the Trash.
    If the Trash does not empty or if you see a message in Terminal that says "usage: chflags [-R [-H | -L | -P]] flags file..." you most likely did not type the text in step 2 as indicated or did not leave a space. Repeat the steps if this happens.

  • Strange icon that won't go away

    an icon I don't recagnize has appeared at the top of my screen Its 1xnext to a phone. The phone icon on the screen also has a red atersik on its top left. I have completely cleared my call list and it won't go away. Anybody recognize this?

    Could be a missed call.
    Go to your Messages folder > Menu > View Folders > Phone Calls and at the top of that list, click Menu > Mark Prior read.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Safari Hijacked and Certificates that won't go away.  Malware?

    Four times over the last 4 or 5 months "something" hijacks Safari and freezes it.
    The first 3 times I was in Google.   I clicked on a site, it would freeze Safari and I would get a message from an unrelated website telling me to call a number for Apple Support which was not Apple.
    Each of those 3 times I called Apple Care and they went to Finder>Library> Cache and removed files from Launch Agents, Launch Daemons and Plug-ins.  That removed the problem.
    This time I was in Words With Friends when a Certificate popped up for the website Secure.RubiconProject.Com.   I spent over an hour on the phone with Apple looking for bad files.  None were found but we couldn't get rid of the Certificate and Safari was frozen.   Also, WWF would keep crashing Safari.
    The Apple guy had me install a 2 week free trial of Web Root antivirus.  It found some problems which it took care of.  When I went back to Words with Friends the Certificate popped up again but this time I clicked on it since Web Root would tell me if there was an issue. 
    The screen was blank but since then: 1.  No certificate and 2. an error message that was always across the top of WWF about having to reload the page was gone.  When I used Firefox to work on this problem with Apple, I would keep getting a message that said Firefox would not direct this to another page and I had to click an OK button.  That is gone.
    I don't know why I keep getting this issue since each time it is different.   I told Apple guy that I had read that Apple doesn't need antivirus and in fact they can cause more problems than they help.   He said Apple has a Firewall but nothing for malware which is become more and more prevalent.  There are threads here about not needed anti viruses but I'm at a loss. 
    I have Apple Care for 2 more years but I don't want to keep calling them if I can find a solution to this.  I'm not tech savvy.   I would like an antivirus that is a one time fee. 
    Advice please?

    You may have inadvertently installed adware. Eradicating it is simple and you don't have to download or install anything to fix it.
    Although adware relies upon deception, it does not get installed without your consent, and "anti-virus" utilities cannot prevent users from willfully installing garbage. Only you can do that, by recognizing adware's appearance, which is constantly changing as adware authors constantly attempt to thwart automatic means of detection.
    For an explanation or how this may have occurred, how to avoid it in the future, and for Apple's recommended solution read How to install adware.
    Webroot is garbage that won't help prevent adware. Uninstall it. Be sure to follow its uninstallation instructions.
    I have Apple Care for 2 more years but I don't want to keep calling them if I can find a solution to this.
    You should call them, as often as necessary. AppleCare is a service you paid for. Let them work for you. I suggest you express your displeasure regarding their inept recommendation to install Webroot. OS X's software firewall is also completely irrelevant to your concern.

  • Ghost Rental in my IPOD Video Library...there's a video that I rented that won't go away...how to remove?

    I rented a video on my ipod, watched it, and now it won't go away.  I can't rewatch it either.  When I sync, it is not on the computer as far as rentals.  Can anyone help me remove this?

    See if you have enabled 'VoiceOver'…
    Open Apple Menu > System Preferences > Accessibility, select VoiceOver in the sidebar list, disable that if it is enabled. You may also see a keyboard shortcut listed there (e.g. cmd+F5), it's possible you hit that accidentally

  • When I touch the email icon there is a draft email stuck on the screen that won't go away if I delete or save it.  I've already tried deleting and resetting the email account which didn't work.  How do I get rid of it?

    I have the new iPad 3 and every time I touch the email icon there is a draft message stuck on the screen that won't disappear even if I touch save or delete.  I've tried removing the email account and putting it back on which didn't work either.  How do I get this draft to disappear?

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Or Quit the mail app.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button.
    Go back to mail and see if it is fixed.

  • I got a big red X on my iPod that won't go away! Help!

    So yes, l do have this big red X on my iPod (l'm thinking this is like red ring on an Xbox 360), and no matter how many times i reset it, it won't go away.
    I'm thinking this time is no trick, it's messed up. What can i do?
    - l did try and connect it to my computer, but it resets, and shows the red X again. It's not even showing up on iTunes, so i can't restore it.
    What should i do?!
    - It also shows the website "www.apple.com/support/ipod", and when i go there,
    it does nothing for me.
    Message was edited by: OMGitzSam

    This flower? See bottom right of picture.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/c755c2affe31f517891 b5923b32e4bc1.jpg
    Settings>General>Passcode Lock>Picture Frame>Off

  • Clicking sound that won't go away

    Please Help -
    I downloaded the quicktime software that enables QT to read mpeg2 videos and when I rebooted the volume window/display appeared in the middle of the screen. Now it won't go away and there is never ending clicking sound that is coming out at full volume. Plus when I go to turn it down, it automatically goes back up to full volume.
    I've booted and rebooted and nothing changes.
    Doea anyone have any suggestions

    Only other thing I can think of would be to go into the Sound prefs/setup pane and disable the connection/signal to that device before sleeping the machine. If that works, then perhaps an AppleScript or Automator script could be written to facilitate doing that before sleep, and afterwards to re-enable it when needed.
    If the Newmark device has an on/off switch, perhaps using it would be sufficient.
    You might check the Numark website, see if they have a tech support area and if so, if there has been mention of a similar problem. If there is, a solution may be posted.

Maybe you are looking for

  • Fonts not showing up in InDesign CC 64bit

    I find it extremely difficult to believe that Adobe have not found a solution to the issue of installed fonts not showing up in InDesign. If anybody has found a solution that does not include the "rewriting" of font types. Please assist. We specializ

  • Background Change Picture Feature Not Working

    I have had my macbook pro for about 6 months now and my change background feature worked fine when I first got it. I could add folders of pictures and tell it change ever 5 seconds and it worked. Over time, I messed with my dock settings and backgrou

  • Final Cut Studio Tutorial

    Please pardon my ignorance - but I did a search and came up with a ****-ton possible answers. I am interested in Final Cut as opposed to what I have been using: iMovie I have messed around with FCP a little bit - but I am lost. Can somebody please te

  • Ship to Re-Partnering

    Hi Experts, I am sending a part of  FS which I won't be able to understand.Please tell me how to do the coding. 5. DESIGN / BUSINESS BACKGROUND MDM goes through a tedious data clean-up process when moving one ship-to partner from one sold-to partner

  • How many connections can be created with apex ??

    Using SQLPLUS I can create many concurrent connections to a database. But using APEX only one. What is a problem?? thanks