Strange audio

Hey all, So I am having a strange problem with audio. When I import a song from Itunes or anywhere else it sounds fine when I play it on my TV. I play the dvd and listen to it on my 2 speakers and it still sounds fine. For some reason when I play it on a tv that doesnt have external speakers the audio sound really bad. Kind of hollow sounding with no base. To correct this problem in the past I would just center up the slider on the audio track which I think just makes it mono. I really want to be able to play dvds in stereo, Anyone have any idea whats going on?

Are the audio mono or stereo on your timeline? If they are stereo both will get affected if you edit either one of them, if they are mono only the one you are editing will make changes. Try to select both tracks of the audio and choose Modify > Stereo Pair or hit option + L on the keyboard.
What else you can do if it is mono you can pan the one track to 100% left and the other to 100% right. Just double click on the audio to load it into the viewer and then you can actually see if it is mono or stereo you're working on because either there will be one tab saying Stereo(a1a2) or the will be to separate tabs saying Mono(a1) and Mono(a2).
Hope this helps
Message was edited by: sigrdr
null

Similar Messages

[solved] Strange Audio Issue

I am experiencing a strange audio issue with my Intel-HDA ICH7:
# lspci -v
00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 30a5
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access>
when I installed Arch linux the first time a mounth ago on this computer, I had a sound problem that was solved in a very strange way.
Everything worked fine until a week or so (I believe from Alsa 1.0.12). Now sometimes sound works and sometimes it doesn't. For example sometime I boot the computer and have no sound, then I reboot it without doing anything, and then sound works.
I have tried messing with the modprobe.conf:
# /etc/modprobe.conf (for v2.6 kernels)
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.11 ---
#alias snd-card-0 snd-hda-intel
#alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---
#options snd-hda-intel model=F1734
options snd-hda-intel model=z71v
options snd-hda-intel position_fix=1
but it was useless. If I put back the modules in rc.conf everything is worse: sound doesn't work at all.
A diff between lsmod in a "working boot" and a "without sound boot" showed that the same modules where in kernel memory.
A diff between dmesg showed this difference:
< hda_intel: azx_get_response timeout, switching to single_cmd mode...
was present in the not working boot. This line is absent in a working boot dmesg.
The only way to make the sound card working everytime is to remove the snd* modules load from the boot sequence and load the modules "by hand" after the login.
Any ideas?
PS : If something is unclear due to my poor English please tell my and I'll try to explain it better.

phrakture wrote:snd-hda-intel is screwed up - on my thinkpad I had to go into the bios and enable the modem for sound to work. Oddly enough, the modem was off by default.
Also, mine has no PCM listed, I need to use "front" as my PCM level... not to mention the UI is way off with 'tpb' (if you have a thinkpad)
Yes it's not an Arch Linux related problem: I had problems with Debian (Etch and Sid based distros like ubuntu) too (but there I had no modprobe issue on the init sequence. Maybe is a problem of shared IRQs, but I have to study the existing documentation as I am a newbie). The difference is that Arch is simple enought for me to try something like modprobing "by hand" in the init sequence. PCM seems to work, however the volume is very low and I have found no way to make the mic work. Under Mepis I was able to make it work only if I plugged it in windows xp and then reboot into Linux. But I can't try it with Arch as I have erased the windows partition...
I will try the new kernel, study the documentation and then report. Hoping this will be usefull to others too.

Strange audio problem

I've created hundreds of DVD's with my current set-up (iDVD 4.0 on a G5 with OS 10.3.9). Suddenly I encountered a very strange problem. The audio sounds fine in iMovie or when I play the .mov file. The volume seems fine--just like any project that I have done before. When I burn it to DVD, however, I can barely hear it with the volume on the TV all the way up. I have the Canopus ADVC-300, which allows me to export an iMovie project directly to a TV. When I do this, the audio is barely audible on the TV. Other DVD's and other iMovie projects play back with the correct volume. What in the world could be causing this? I'm totally at a loss on this one.

Thanks for the suggestion, but that's not it. I have been using the same version of Quicktime all along. I have had so many problems after upgrading software that I basically stopped installing upgrades. Also, I produced other DVD's after experiencing the problem with this particular project. It is so strange that the audio sounds fine on the computer but not when played to a TV (either through a DVD or the A-to-D converter).

Strange Audio Blip

I have some e-learning where we have a little screen with some audio. Then there is a stop on the timeline. The user can click next and get the next screen.
On some of the screens the audio does a little "glitchy beep" at when it gets to the stop. It doesn't seem to happen all the time and there is nothing I can find in common when it does.
The glitchy sound isn't part of the mp3. When played in external players there is no glitch at the end of the file.
The sounds are set to streaming. When tested in the timeline it never makes the sound.
Local testing also doesn't produce the sounds.
When played over the internet is when we hear it. But if we replay that screen it doesn't happen on the second time.
There is a keyframe with the streaming sound. And where the wave form shows the end of the sound we have put another keyframe.
I'm leaning a little bit toward the glitch being the first few milliseconds of the next screens sound. They are all on the main timeline. We have the stop at the end of each screen and then there is an empty frame and then the start of the next screen. And generally there are at least one or two frames before the next audio starts.
But that seems strange that Flash would stop on, say, frame 1353 and then look ahead to 1357 and start the audio there. Doesn't it?
Anybody else have this issue? Found any answers?

Further digging only seems to muddy the waters.
Adding one extra frame before the new audio begins (there were already 3) seems to make the difference. But then that doesn't really explain why it was doing it. And if extra frames are the answer how many will I need?
I did some digging and there seems to be a 46 millisecond delay built into the way AS2 handles sounds. I'm wondering if it is some kind of timing issue that depends upon the framerate, the number of samples in the first sound, processor load, and the sound card. If so I'm going to have a really hard time coming up with a solution...
Anybody?

Get strange audio from other parts of the video when I am using transitions

In most cases when I add a transition, I get a strange piece of audio inserted during the transition. I know I can go in and manually edit this out, but is there some sort of fix to keep this from happening in the first place?

Hello, Rick,
Welcome to the discussions.
Yes, that is a problem that happens sometimes, especially with the Cross-Dissolve transition. I use that one a lot, and run into this with many of my clips. I have 'fixed' it with a variety of methods including muting, putting music over it, adding audio clips recorded from the beginning of the next clip....for this one I have to delete the transition, crop the next clip, remove it to the clips pane, add back the transition and record the audio from the deleted clip using WiretapPro. Works great and actually is faster than it seems.
You might be able to get some correction by trashing iMovie's preference file; Close iMovie. Go to YourUserName/Library/Preferences/com.apple.imovie.plist
If you also have iMovie 8, you will see its plist as com.apple.imovie7.plist, so be sure to trash the correct one.
Drag the plist file to the trash. Reopen iMovie and see if it works properly now.

Strange audio problem in Premiere Pro CS6

Hi
I have encountered a very strange problem. I am editing a documentary film in Premiere Pro. All material has been shot on the Sony FS 100 camera - imported into PP with the Media Browser. In one interview the last part of a clip has corrupted audio. At one point on the timeline the audio stops playing, and it sounds like a scratch on a vinyl record - two words repeating themselves to the end of the clip (See screenshot of timeline). The images are as they should. When I open the Avchd source clip in VLC the audio is working. When i Import the clip into Final Cut 7 using Log and Transfer the audio is working. My only other option would be that there is a software problem with Premiere Pro CS6. Any ideas of how to fix this issue?
Version PP: 6.0.1
Source footage: MPEG-4 AVCHD (1080/25p - Sony FS100)
Version mac: OS x 10.8
Model Name:     Mac Pro Mid 2010
Processor Name:     Quad-Core Intel Xeon
Processor Speed:     2.4 GHz
Number Of Processors:     2
Total Number Of Cores:     8
Memory: 20 GB
Graphics Card: NVIDIA GeForce 570 GTX
Third-party I/O: Matrox MXO2 with Max
Mercury Playback Engine: Software mode

One similar, potential problem, that can develop, is when the Conforming process is interrupted, before it completes 100%.
A quick way to rule that out, would be to navigate to the Media Cache files, and Delete the CFA and PEK (Waveform Display) for that Clip, outside of Premiere Pro. Then, when you launch PrPro and Open your Project, the program will recreate both of those files. There is a little progress bar, that many do not notice. Let it complete 100%, before even touching the computer. Test.
I hope that it is as simple as that.
Good luck,
Hunt

What could be causing a VERY strange audio lag?

Hi,
This is a problem that I have begun experiencing in the last week or so and I have found a post on another site of someone who is having the same problem. I'm not sure if it is an update gone wrong but it is nothing I have never seen before in my years of video editing.
Ok here's what's happening...
If there are two audio tracks (say a stereo music track), when I push play one tracks runs slower than the other. However this is where it gets interesting... One thing I observed (very noticeable with headphones on) is that if it is the left channel which is running slow, when you pause the video and push play again, the right channel then becomes the channel which runs slow. It swaps channels every time you pause and play. With the slow channel, there is also a good half a second delay before it starts after the good channel (and vision) has begun. So if you are listening to music, it will start in the left channel then the right one will come in slower about a half a second later. Then you push space (pause) then space (play) and the same happens but it starts in the right channel.
The computer I have is very powerful and all my hard-drives are internal so I can't see it being a system issue. I also only reinstalled my computer fully a few weeks ago so I know that junk on my computer isn't the issue either. As from other checks, it also happens in other projects, even older ones which I had finished ages ago and never had any problems. The problem actually went away earlier this week but has just come back so it seems to be an intermittent problem.
Very strange... Any ideas or assistance would be great as I have come to a bit of a standstill with this.
Matt

Hi,
Here's the answers:
Where did the audio come from? I have tried a few various methods which all have the same result including bringing in a stereo 48KHZ aif or using footage captured from the tape (stereo only - the problem goes away if they are changed to two discrete mono channels)
How was it copied to the computer and imported to FCP? Either captured in the case of footage from the camera or from an AIF file where it would be dropped into a bin and then onto the timeline.
What format is the audio in? Sample rate? Everything is at 48KHZ.
What kind of sequence are you working in? I only use two types of sequences and it happens on both being HDV - 1080i50 and DVPAL 48KHz Anamorphic.
Is the audio's format native to your sequence settings? Yes, both for the captured footage and the imported audio.
Hope this helps

Strange audio in infinity blade 2?

Hi guys
Does anybody has a problem with audio in infinity blade 2?
In detail,the game is playing only music, and not others effects, as walk steps, sword hit ecc ecc.
Sometimes it's working, but just exit end re-enter with double tap on home button, and it doesn't work again.
Any ideas??
Marco

I've already deleted and re-installed but it didn't worked.
Is strange because seems the problem occurs only with this app.

Strange audio behavior in 10.5.2

Hello,
I am experiencing some odd audio behavior in OS 10.5.2.
I am using iTunes connected through the Built-In Line Out to a pair of Altec Lansing speakers with subwoofer.
Recently, I am getting fluctuating volumes with iTunes playback - the volume will get louder for a second and then go back. It doesn't happen regularly, but frequently enough to be annoying. Also, if I pause playback on iTunes, I will hear some noise that resembles rumbling, not really popping or hissing.
It's very strange and I'm not sure what might be causing it.
Any suggestions?

ok, hmmm do you have any thing thats set to open when you login? if not what i'd like you to do for me is test it in a new user. create a temp acct on the computer and see if it does it there. if it DOESN'T then from finder select go>home>library>preferences>and take the com.apple.finder.plist and move it to the desktop then restart. if it DOES happen in the second user then please let me know and ill see if if i can find any thing else other than to reinstall snow leopard. if you do have login items i'd like you to remove them and reboot to see if it still happens.
>system prefs>accts>login items
if you have any questions please ask

Strange audio problem please help!

Hi, I was recording audio with Logic and a usb audio interface (m-audio). Then, I unplugged the usb cable and I selected to use core audio. I closed Logic. I noticed that the volume controls (up and down) are no longer available and inside sys pref. there's optical out selected (the only available). There's also a red light coming from the port (I'm assuming is the optical out). If I plug in the hearphones everything works fine. What can I do in order to have audio played from speakers again?
Please help!

Update: I followed some instructions I found on a blog and I managed to solve the problem. I inserted a paperclip inside the jack output port and I pushed it for a while. Suddenly, inside sys pref. the output changed from "optical out" to integrated output. It's very strange, anyway I think it's a good idea to go to my Apple Store to check if the soundcard has some problems... The MacBook is still under warranty so...
Any comment would be appreciated, bye!

Multicam-Strange Audio file trunctation when changing cameras

I have a sequence nested as a multicam with audio from one of the cameras in the multicam included in another audio track in the same sequence. When I change angles to the angle with the camera with the audio on it, the audio is deleted from that point in the sequence until the next camera change or cut.
None of the other tracks are affected. I can lock the audio track but then this impairs my efficiency at doing a razor cut to edit the multicam sequence and audio track at the same time.
I suppose I could (and I will) create a separate audio file and put it into the same timeline, but I feel I should not have to do this.
This video and audio happens to be XDCAM EX format.
Thanks for any advice.

Yeah, sorry it's confusing, let me explain:
I usually edit multicam this way:
I nest the sequence that has multiple cameras/tracks (sourceSequence) into a new sequence, let's call that sequence MCSequence
I also put one or more tracks sourceSequence into MCSequence below the nested soureSequence track. This was I have a reference for all the clips and blank spaces between clips in sourceSequence.
I also use one of the audio tracks of these reference clips as the master audio for MCSequence.
In MCSequence, if I make a camera change, inexplicably the left audio track of the 'reference' cuts that point and is deleted up until the next cut point in MCSequence. This happens to be the exact audio track I need to use which happens to be the XDCAM EX track. The right channel isn't affected, just the left.
Since I'm using that track as my master audio, it's a pain. I want to be able to have a fully edited MCSequence but also have this master audio track as well available so I can perform volume corrections and other stuff, L edits on the audio etc. It's a pain to have to deal with what I think is a strange bug.
Anyway I hope this is clear but I fear it's just a glitch I'll have to deal with.
Thanks for any advice.

Strange audio on freeze frames that won't go away?

So i create freeze frames, then when i play the 4-sec frame it makes a strange noise like a tape rewinding and this noise doesn't go away if i record a voiceover.
I can't mute it either because according to my macbook there is no noise.
And the sound jumps, so 4 seconds of audio is taken out from the following clip and the audio for the all the clips is moved by 4 seconds.
Any help would be so welcome, thanks.

Oh and i got a photo from iPhoto, added it to the end of the project library and miraculously the noise had gone, i then added a voice over.
But then when i moved it to a different place (inbetween 2 clips) the noise came back.

"cat /dev/audio" as solution to strange audio-noise?

With my Macbook Pro (2,2), I hear a strange noise when I connect a loudspeaker to the earphone output that isn't there when I use the internal loudspeakers.
The issue vanishes when I listen to music for example. And appears again as soon as I clouse the player.
interestingly, when I enter "cat /dev/audio" in a console, then the noise disappears! And I can still listen to music and everything else!
I see then many lines of something like "
|z{{{{{{{{|{{{{{{z|{z{{{|{{{{{{{|{{|{{|{{{{{{{|{{{{|{{{{{{||{{|{{{{{|{{{{{|{{{{{|z{{{"
Any idea what the problem could be?

ebonyhack!!! You genius!!!
I've recently bought brand new quad core beast, with loads of memory, twin 20" cinema screens, apogee duet, Logic Pro Studio 8, Novation keyboard with automap. The reason I bought this lot was because it is all designed to work seamlessly with each other. And with a mac (my first ever), it wouldn't have all those lovely windows / PC issues I had to put up with for years.
Setup was an utter doddle - easy peasy - it all recognised the other components and worked like a dream, until ............................... first song, three instruments, three audio tracks, HUNDREDS (I am not exaggerating) of error message 10011! It is impossible to record vocals when the darned track keeps crashing! Vocalists get very annoyed. Critical listening to your mix is a complete joke, so you waste hours - no - days of your life bouncing, listening, changing the mix, bouncing, etc, etc, etc.
I have gone through so many of these threads, trying all the "fixes" offered, with no success at all.
Just read this thread, unticked that I/O box, loaded up three songs into memory (just for fun!), played the one which crashed most frequently, waited, and waited .............. and waited - and it played right through! First time since I'd got more than the first track or two written! Did the same with the next song - worked perfectly!!!
Early days as yet, but thanks so much - I love you.

Strange audio track glitch...

Hi - I hope someone can shed a bit of light on this - I bought Logic 8 a while back and its been perfect - but I recently upgraded to 9 and have a strange thing happening with audio tracks and muting.
When I bring in a new audio track and try to pull in a loop for example the audio does not play. However if I pull the same loop into an existing audio track it plays fine. Equally if I solo the new track, another audio file will still play until I mute that track...There is no automation on the new track and nothing seems to be hampering the audio play back that I can see,
Any help much appreciated!
Thanks

Hi - I hope someone can shed a bit of light on this - I bought Logic 8 a while back and its been perfect - but I recently upgraded to 9 and have a strange thing happening with audio tracks and muting.
When I bring in a new audio track and try to pull in a loop for example the audio does not play. However if I pull the same loop into an existing audio track it plays fine. Equally if I solo the new track, another audio file will still play until I mute that track...There is no automation on the new track and nothing seems to be hampering the audio play back that I can see,
Any help much appreciated!
Thanks

Strange "Audio Stutters" in All Exports

Hello,
What I can only describe as "audio stutters" occur at seemingly random times in my Premiere Pro exports created with Media Encoder. They are very brief but noticeable intrusions that sound like glitches.
All audio sounds perfectly normal in Premiere; there are no problems on the timeline. I have tried the following troubleshooting steps:
Restarting the computer
Restarting the software
Cleaning Premiere's cache through the preferences panel
Changing the Renderer to "Mercury Playback Engine Software Only" in Media Encoder
Unchecking "Enable Parallel Encoding" in Media Encoder
These "stutters" occur in all exports; I have experimented with different projects stored on different drives, as well as with different formats (ie., H264 and Quicktime) and audio codecs (ie., AAC and MPEG).
The only way I have found to create an export WITHOUT "stutters" is by sending a sequence to Audition, creating a mixdown file, importing this file into Premiere, using it to replace the original audio, and then sending this single-audio-track sequence to Media Encoder.
I would love to be able to export from Premiere without having to run my audio through Audition. Any and all leads are welcome!
For your reference, I am running Premiere Pro CC on Windows 8.1, with a 3.60 GHz processor and 16 GB of RAM. I have 11 GB available for Adobe products. For what it's worth, I know for certain that I did not experience this problem prior to the 7.2 updates.
Thanks in advance!

Clearing the Cache is best done outside of PP using Windows Explorer. You can get the location of those files under Edit>Preferences>Media...
(On a side note, this Cache cleaning could use some improvement. Please add your vote. http://forums.adobe.com/thread/1369263?tstart=60)
If that changes nothing, it would be helpful if you could upload a file somewhere for us to hear the issue.

Strange audio

Similar Messages

Maybe you are looking for