Strange behavior after waking from sleep, lion

Not sure how to describe my problem... When I come back to my Mac to resume working after the screensaver has been activated for some time (say 10 minutes or longer), the screen is frozen.... Well, not exactly. As I move my mouse around to wake it, it leaves a "pixelated" trail... Almost like an etch-a-sketch. When I locate my login icon, I then click it and the password window is revealed.
Note: it takes 10 times longer to wake from sleep than it did with Leopard. The system also feels generally much less snappy and responsive. I booted from an external drive today and ran Disk utility to verify and repair (it found tons of issues) but with no improvement. Also note, I performed "clean install from scratch" this time.
Someone please help!!!!!

Hello Mike,
I wonder if it's a variation of this...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US

Similar Messages

Strange behavior after waking from sleep

I recently got a Mac Pro 3.33GHz 6-core and put an OWC 60G SSD in as the boot drive. It worked great for the first month or so, but now it's acting strange. Before, when waking from sleep, my computer would immediately come on and be ready to use. Now when I wake it up, it takes a good 20 seconds for me to be able to use. (It's a very long time compared to my computer being awake before I could turn on the monitor.)
When waking, moving the mouse makes a stuttering motion and its not useable at all until my computer is done with whatever its doing. And, my external firewire drive always crashes like I didn't properly eject it. It never used to do this.
I've tried waking my computer without the drive on but it still acts the same. I haven't changed or installed anything since it has been doing this. Does anybody know what's going on? Thanks

Yes that is something I was thinking about mentioning which is called zapping the pram. It will reset some of your settings back to there defaults but no big deal and it does eat up your battery on your logic board so only do it when needed.
It may get rid of the problem.
as cscscs said.
while restarting, hold down option, command, P and R all together, which is supposed to do some kind of restore to hardware (I think)
Before you hit the power switch hold down the command option p and r keys then hit the power button and hold it down until you here the computer chime twice then let go.
I found apples instructions here.
Resetting PRAM and NVRAM
http://support.apple.com/kb/ht1379
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
the other bit he said about holding the boot button with everything unplugged I have not heard before but I would do it then zap the pram and see if your good to go.

Bizarre app behavior after waking from Sleep Mode

My iMac Core Duo runs like a top. It is fast and quiet. I have no problems with applications, both Universal and PowerPC. I maintain it with everything that I suggest others do in posts.
But, there is this one strange quirkiness that I have put off mentioning because I kept hoping that each new OS X update would address the issue. It has to do with waking my Mac from sleep mode with it logged into my user account. Not every time, but most of the time, if I put my Mac to sleep or it goes to sleep from inactivity while it is logged into my user account, I experience strange application behaviors upon waking.
For example, upon awaking Mail.app will contact my .Mac account and download any new mail that has arrived. But, if I try to open any of this mail, instead of opening, Mail.app will open a new outgoing email addressed to whomever sent me the mail I tried to open. Quitting and restarting does not solve this problem. Other apps demonstrate similar bizarre behavior. To only way to solve the issue is to log out and back into my user account.
However, if I log out of my user account and then put the Mac to sleep from the Login Manager I don't experience this issue. So at night I always log out before putting the Mac to sleep.
Anyone else experiencing similar issues? Any ideas on solving this? Do you think it is a bug in Universal Mac OS X?

Sorry this isn't a solution, rather is a commiseration. Often after my iMac wakes from sleep mode it refuses to see my internet connection. I have to unplug and reset my DSL modem to force the computer to see that it exists.
It sounds like the problem might be related, does anyone have any brilliant suggestions?
Thanks,
Lonnie

My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep. Is there any way to make this instant?

Hi
My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep. Does anyone else have this problem and is there a fix?
Alan

coxorangepippin wrote:
The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
What that means is that is can't be used with Lion 10.7. PowerPC was the chip Apple used up until 2006 when they switched to Intel. At that point, they created the Rosetta emulator to allow for PPC support for 5 years. They finally dropped the support with the release of Lion. It will only work with OS X 10.6 or earlier. The other option is to purchase a new GPS, which can be had for $100 for a decent one.

After waking from sleep, my iMac (Lion) is unresponsive. The mouse moves, but when I click things it won't open them.

After waking from sleep, my iMac (Lion) is unresponsive. The mouse moves, but when I click things it won't open them.
This has happened EVERY time the iMac goes to sleep for the last few days.. the only way I have found to resolve the issue is to manually restart the computer each time via the button on the back of the iMac.
Any and all help is appreciated!
Thanks

FWIW, I never sleep my machines or their HDs, just their displays and never have an issue waking up the displays, usually run 24/7. Give that a shot.

Macbook Retina with Mountain Lion issues after waking from sleep.

Macbook Retina with Mountain Lion has the spinning beach ball of death after waking from sleep a few times. Anyone else seeing this? A fresh boot is very quick, but waking from sleep lags at times. Then after a few times the spinning beachball of death appears and nothing is responsive making me reboot the machine.

I've been suffering from this too, and am currently trying this:
http://www.ewal.net/2012/09/09/slow-wake-for-macbook-pro-retina/
Seems to be tied to this 'Power Nap' feature. I tuned it for 12 hours instead of 24.

External Hard Drive Fail After Waking from Sleep

Hi,
I've been having this issue for over a year (since upgrading to Lion, and now still persists after upgrading to Mountain Lion), and I haven't been able to find the exact answer I need after searching through the posts here, and on the internet.
I have a 2011 MBP, and after upgrading to Lion last year, I've noticed that my WD external hard drive for the Mac has issues to be recognized after the laptop wakes from sleep. The drive icons are still there on the desktop, and all the files are listed. However, I cannot open any of the files, and Time Machine backup automatically fails.I am able to eject the drives by dragging the icons into the trash can. However, nothing happens if I simply unplug the fire wire 800 cable and re-plug it into the computer after ejecting the drives. I need to reset the external drive by unplugging both the fire wire cable and the power supply, and replug everything.
Aside from being a hampering process after waking from sleep, this is also very stressful on the drive itself, so I would like to fix this. Does anyone know the issue behind this or have a solution? Thanks in advance!

Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

Restarting after waking from sleep

I have a mid 2010 macbook pro running Mountain Lion OS X 10.8.3 of which keeps restarting after being left in sleep mode for an hour or two. When waking from sleep mode, the mac functions for about 5 seconds, before restarting by itself. I have tried deleting certain plist files (as suggested by other posts) but that doesn't seem to have helped. I have also recently installed a new hard drive, but i continue to have the same problem. Below is the panic report from the recent restart after waking from sleep mode:
Thu May 23 22:40:58 2013
panic(cpu 0 caller 0xffffff7f9a7957f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811b9a5000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address
0xffffff810a102f80 : 0xffffff801a01d626
0xffffff810a102ff0 : 0xffffff7f9a7957f2
0xffffff810a1030b0 : 0xffffff7f9a8923b9
0xffffff810a103110 : 0xffffff7f9a89242e
0xffffff810a103180 : 0xffffff7f9abb8c82
0xffffff810a1032b0 : 0xffffff7f9a8b8fe8
0xffffff810a1032f0 : 0xffffff7f9a79d567
0xffffff810a1033a0 : 0xffffff7f9a79b05a
0xffffff810a1035a0 : 0xffffff7f9a79c983
0xffffff810a103670 : 0xffffff7f9b8b5790
0xffffff810a103730 : 0xffffff7f9b8e0f98
0xffffff810a1037b0 : 0xffffff7f9b8c8308
0xffffff810a103810 : 0xffffff7f9b8c8be9
0xffffff810a103860 : 0xffffff7f9b8c909b
0xffffff810a1038d0 : 0xffffff7f9b8c98d1
0xffffff810a103910 : 0xffffff7f9b89534f
0xffffff810a103a90 : 0xffffff7f9b8c5e39
0xffffff810a103b50 : 0xffffff7f9b893de8
0xffffff810a103ba0 : 0xffffff801a4650c9
0xffffff810a103bc0 : 0xffffff801a466670
0xffffff810a103c20 : 0xffffff801a46408f
0xffffff810a103d70 : 0xffffff801a0984a1
0xffffff810a103e80 : 0xffffff801a020aed
0xffffff810a103eb0 : 0xffffff801a010448
0xffffff810a103f00 : 0xffffff801a01961b
0xffffff810a103f70 : 0xffffff801a0a5dd6
0xffffff810a103fb0 : 0xffffff801a0cdd43
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a738 000->0xffffff7f9aa45fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
         com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f9 aa53000->0xffffff7f9ad74fff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
         com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f9b882000 ->0xffffff7f9b94efff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000019e00000
Kernel text base: 0xffffff801a000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3064164203775
last loaded kext at 299154607765: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f9c477000, size 229376)
last unloaded kext at 354384336276: com.apple.filesystems.msdosfs          1.8 (addr 0xffffff7f9c469000, size 57344)
loaded kexts:
com.Logitech.Unifying.HID Driver          1.3.0
com.Logitech.Control Center.HID Driver          3.7.0
com.apple.filesystems.smbfs          1.8
com.apple.filesystems.exfat          1.3
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.12.87
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.GeForce          8.1.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.SMCMotionSensor          3.0.3d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleIntelHDGraphics          8.1.0
com.apple.driver.AppleIntelHDGraphicsFB          8.1.0
com.apple.driver.AppleMuxControl          3.3.0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleUSBHub          5.5.5
com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.nvidia.nv50hal          8.1.0
com.apple.NVDAResman          8.1.0
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.driver.IOBluetoothHIDDriver          4.1.3f3
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Any suggestions would be greatful,
Thanks,
Marie

Replace the pair of DIMMs first.
Monitor the temps inside.
Install and use SmcFanControl 2.2
Run Apple Hardware Test
You may want to try a clean system install to test with once you have the RAM replaced. Faulty RAM can cause all kinds of issues. And dirty files. Some deeper check for corrupt files than Disk Utility is probably in order.
There is a significant "Inrush-current" on boot and wake from sleep with the 2008s. They need good power, a 1500VA/900W UPS, and sensitive to other equipment on the same circuit.
Inrush current

Macbook pro 2010 crashes after waking from sleep

Hi,
I upgraded to mountain lion a month or so ago and ever since my MBP often crashes after waking from sleep. I've included the error report below. Any help would be appreciated. After it restarts, it works fine. Problem consistently happens after waking from sleep.
Thank-you
Interval Since Last Panic Report: 55755 sec
Panics Since Last Report:          1
Anonymous UUID:                    D0E51DBB-BAAC-864E-AF93-8DAF5E934CE9
Sun Dec 2 08:24:22 2012
panic(cpu 0 caller 0xffffff7f8aabdb25): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811e05d000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address
0xffffff80fa7bb420 : 0xffffff800a21d626
0xffffff80fa7bb490 : 0xffffff7f8aabdb25
0xffffff80fa7bb520 : 0xffffff7f8abb74b3
0xffffff80fa7bb580 : 0xffffff7f8abb7527
0xffffff80fa7bb5f0 : 0xffffff7f8aecc853
0xffffff80fa7bb730 : 0xffffff7f8abdd659
0xffffff80fa7bb760 : 0xffffff7f8aac78da
0xffffff80fa7bb810 : 0xffffff7f8aac2fac
0xffffff80fa7bba00 : 0xffffff7f8aac43a2
0xffffff80fa7bbad0 : 0xffffff7f8acb815a
0xffffff80fa7bbb00 : 0xffffff7f8ac9be1a
0xffffff80fa7bbb30 : 0xffffff7f8ac9b241
0xffffff80fa7bbba0 : 0xffffff7f8ac9b362
0xffffff80fa7bbc20 : 0xffffff7f8aca687d
0xffffff80fa7bbc50 : 0xffffff7f8acae61c
0xffffff80fa7bbdd0 : 0xffffff7f8aa5a3c7
0xffffff80fa7bbe40 : 0xffffff7f8aa4457b
0xffffff80fa7bbeb0 : 0xffffff7f8aa46c04
0xffffff80fa7bbf00 : 0xffffff7f8aa0839f
0xffffff80fa7bbf20 : 0xffffff800a649e4a
0xffffff80fa7bbf60 : 0xffffff800a23dcde
0xffffff80fa7bbfb0 : 0xffffff800a2b26b7
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000->0xffffff7f8aa36fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
         com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8aa42000->0xffffff7f8aa53fff
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
         com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8aa56 000->0xffffff7f8ad58fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8aa42000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000
         com.apple.nvidia.nv50hal(8.0)[9F3D09B5-3158-3D9E-BDA3-E71576AAD3B7]@0xffffff7f8 ad66000->0xffffff7f8b088fff
            dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8aa 56000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000000a000000
Kernel text base: 0xffffff800a200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 50092647901403
last loaded kext at 48562451601465: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f8c5c0000, size 16384)
last unloaded kext at 48645674911297: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f8c5c0000, size 12288)
loaded kexts:
com.razer.orochi.driver    2.0
com.rim.driver.BlackBerryUSBDriverInt    0.0.74
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.60
com.apple.driver.AGPM    100.12.69
com.apple.driver.AppleHDA    2.3.1f2
com.apple.GeForce    8.0.0
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.0.9f33
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.ApplePolicyControl    3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleUpstreamUserClient    3.5.10
com.apple.driver.AppleIntelHDGraphics    8.0.0
com.apple.driver.AppleIntelHDGraphicsFB    8.0.0
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.0.9f33
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleSMCLMU    2.0.2d0
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleMikeyDriver    2.3.1f2
com.apple.driver.AppleMuxControl    3.2.11
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.SMCMotionSensor    3.0.2d6
com.apple.driver.AppleUSBTCButtons    235.4
com.apple.driver.AppleUSBTCKeyboard    235.4
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleUSBCardReader    3.1.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AirPort.Brcm4331    602.15.22
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard    165.5
com.apple.driver.IOBluetoothHIDDriver    4.0.9f33
com.apple.driver.AppleHIDKeyboard    165.5
com.apple.driver.DspFuncLib    2.3.1f2
com.apple.iokit.IOAudioFamily    1.8.9fc10
com.apple.kext.OSvKernDSPLib    1.6
com.apple.nvidia.nv50hal    8.0.0
com.apple.NVDAResman    8.0.0
com.apple.iokit.IOSurface    86.0.3
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.iokit.IOBluetoothFamily    4.0.9f33
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.0.9f33
com.apple.kext.triggers    1.0
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.driver.AppleGraphicsControl    3.2.11
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.iokit.IONDRVSupport    2.3.5
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.driver.AppleHDAController    2.3.1f2
com.apple.iokit.IOGraphicsFamily    2.3.5
com.apple.iokit.IOHDAFamily    2.3.1f2
com.apple.driver.IOPlatformPluginFamily    5.2.0d16
com.apple.driver.AppleSMC    3.1.4d2
com.apple.driver.AppleUSBMultitouch    235.7
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.driver.AppleUSBMergeNub    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.driver.AppleKeyStore    28.21
com.apple.iokit.IOUSBMassStorageClass    3.5.0
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
com.apple.iokit.IOStorageFamily    1.8
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Razer Orochi, 0x1532, 0x0013, 0xfa140000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 9
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

Back up all data, then uninstall the Razer and Blackberry software according to the developers' instructions. Reboot and test. Most likely there will be no change. In that case, see below:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video

Logic Pro X inaccessible after waking from sleep when using an MCU Control Surface

I'm having a problem I cannot seem to get around without force quitting Logic every time. If I have a Control Surface setup as a Mackie Control (v1.0); and if the computer goes to sleep, and then i turn off the controller while the computer is asleep (for any reason), and then wake the computer without turning on the controller first, Logic becomes completely unusable and must be force quit.
My controller in this example is Solid State Logic's Nucleus controller, however it happens with other Mackie Control compatible controllers (i have another one i tested against), BUT not a real Mackie Controller sold by Mackie (i tested with that as well); more details below.
For the SSL controller, Logic automatically sets it up like this:
Now if the computer goes to sleep, and i wake it up, i get the following dialog, which is fine:
After clicking on "Continue" button or hitting the enter key, Logic is rendered useless, as if there is a modal dialog still open somewhere. Clicking anywhere on the gui results in white flashes and nothing else. doing cmd+Q to quit actually makes it try to quit (a save dialog appears), but it never does successfully quit, making me resort to force-quitting. For an example, here's a pic of the file menu at this point:
I also have a regular Mackie Control Unit (MCU Pro) and the strange thing is with that unit, everything works fine after sleep, turning off controller, and re-awakening. However, there is a difference in what kind of dialog is displayed after the sleep, which probably has something to do with this issue.
Here is the setup screen of the MCU Pro:
And here is the dialog for the missing ports after waking from sleep:
This dialog is completely different than the other control surface's missing ports dialog. When clicking on "Keep unassigned" here, Logic resumes working fine.
The project is as minimal as possible; nothing is loaded, all that's there is an empty instrument track and a Control Surface configured.
I'm using a Mac Mini (late 2012)
Processor 2,6 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000
Software OS X 10.9.4 (13E28)
with Logic Pro X 10.0.7
Any help would be greatly appreciated!!

Did you ever figure out a solution to this problem?
I just pulled out my original Emagic Logic Control (MIDI) and I have having the same problem.

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this?

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this? Thanks --

Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

Freeze after waking from sleep mode on MBP retina

After waking from sleep mode my MBP retina freezes for 3-5 seconds. Mouse and touchpad don't work. I wonder if it's mountain lion problem or hardware problem. Anyone faced this?

Just got a brand new model and OS X 10.8.2 (12C3012) and face the same issue, almost everytime it sleeps for too long. This is not a 3rd type SDD, this is a standard Apple SSD. I turned off the BT, I removed the almost every option from the battery saver mode. The current test is to disable the power nap - I will let you all know the result in a few hours.

Sound volume control unresponsive after waking from sleep

Lately, a strange problem has developed on my MacBook 13-inch Aluminum (Late 2008), running Mac OS X 10.6.4:
After waking the MacBook from sleep, the sound volume control keys on the keyboard does not affect the volume control of:
* Neither the sound volume output by the built-in speakers,
* nor the sound volume indicator/slider in the menubar,
* nor the sound volume indicator/slider in the Sound preference pane in System Preferences,
Only the sound volume slider/indicator in the Sound preference pane in System Preferences has an effect on the actual volume ouput by the built-in speakers.
First I thought the problem was affected by disconnecting a set of analog headphones while the MacBook was sleeping -- it seemed that after sleep the volume control keys on the keyboard and menubar item still was set to affect the headphone port and not the built-in speakers.
However, the problem just occured after sleeping without anything connected to the MacBook. The built-in speakers were muted, when the MacBook lid was closed, and the computer went to sleep - after waking from sleep the built-in speakers were unmuted - and control was only possible through System Preferences.
Any ideas?

Not sure if you stumbled on the other threads like this one:
http://discussions.apple.com/thread.jspa?messageID=11801555&#11801555
I've been having the same problem on my Mac Pro for a while, finally decided to see if there were some other people having the problem. I'll see if the others have a solution yet.
One workaround I've been doing is to go to Preferences -> Sound and select a different output device. For me, I have to flick to Internal Speakers and then back to Line Out.
Brett

Unable to get keyboard or mouse focus back after waking from sleep

Here's a problem with very specific symptoms, which I've seen on a number of Macs that I support:
- After waking from sleep, the Macs are unable to fully achieve focus on any window. All windows, in all apps, appear to be in the background -- their frames have the lighter gray look of backgrounded windows.
- I can grab any window and move it around, and even interact with elements of the window by clicking on them. I cannot, however, ever really bring the window to the front.
- I can't type anywhere.
- Regardless of what window I click on, the OS menu bar remains "stuck" on whatever app was in the foreground when the Mac went to sleep. Sadly, though, none of the menus can be selected or pulled down.
The only way out of this state is to force a restart.
I am wondering if anyone else has seen this behavior, or, better yet, has actually solved it.
Thanks in advance!

Check the Display & Enhance Contrast settings - System Preferences/Universal Access
Or repair permissions and restart your computer.
Or *Disconnect all peripherals from your computer.* Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select *Disk Utility.*
Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
Click _*Repair Disk.*_
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.

Macbook Pro restart after waking from sleep

Hi all,
Since I've installed Mountain Lion (10.8.2) on my 13" Late 2011 Macbook Pro I've been experiencing a quite annoying problem. The computer, which is connected to an external monitor through Thunderbolt to HDMI will restart (Sometimes to a gray screen with a progress bar) after waking from sleep. I've done some research and it would appear as though the problem is related to the display driver.
I'm wondering if anyone has any experience with this peculiar problem or if there's a quick solution.
Thanks!

Maybe this will help. If you monitor the "More Like This" box, other solved threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/19675376#19675376

Strange behavior after waking from sleep, lion

Similar Messages

Maybe you are looking for