Strange behavior in folder!

If I understand correctly, the folder looks something like this--
folder 99/100
100 photos and two stacked together.
Most of my folders are this way, but I have two that are backwards. Like this....
384/...
I have 385 pics in this folder and one stack of two. If I unstack it goes to this
385
I think this must be a bug, but it could be confusing.

Has anyone seen this problem?

Similar Messages

  • Strange Behavior from iTunes 7.2

    Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
    Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
    1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
    Major pain and very time consuming.
    So it is not adding songs correctly, but through way too much effort able to work around this.
    2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
    3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
    4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
    I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
    Any suggestions??
    Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.

    First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
    Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
    Have you repaired permissions with Disk Utility?
    Is your Quicktime up to date? At least version v7.1.5.
    MJ

  • Strange behavior of StuffIt-Expander

    Hi there,
    having heard of the "new viri" for Mac OSX I turned over to MacFixIt and similar sites to check what's to do.
    The first advice I read was to "un-check" the "open 'safe' files automatically in Safari" option in the Safari preferences. So I did and all files I was downloading ended unchanged (= un-expanded) in my download-folder. So far, so good.
    Now I wanted to expand one <filename>.dmg.gz with double-clicking it. StuffItExpander started, the the message: "StuffItExpander unexpectedly quits" poped up.
    I couldn't expand my d/l files, none! Even with dragging/dropping the file onto the StuffIt icon I had no results.
    Made some brainstorming and resulted in the one point: The only thing I changed in the last time, was indeed the "un-checking" of the open-option in the Safari preferences.
    So I went to the Safari preferences again and "checked" this option, turning it on.
    And you are right: Now I could expand my d/l files like I always could.
    So, how comes?? Is it only me, where StuffIt shows such a strange behavior? What can I do? Perhaps a re-installation of StuffIt?
    Any help is appreciated.
    AndreasB
    iMac G5 1.8 17"   Mac OS X (10.4.4)   Ext. FireWire Drive, Brother DCP-110C Printer

    Andreas, see if this article helps. A lot of folk were plagued with this wee bug, including me. The linked article solved my problem

  • Strange behavior of system with enabled FileVault2, Roaming profile

    Hello,
    I have encountered strange behavor of my Macbook Air after some testing.
    Macbook Air 2012 was newly installed with 10.8.4 and joined network account server on 10.8.4 server with Roaming profile (synced with server home directory). After installing some basic apps like iWork I turned on FileVault.
    Then I start to have the strange behavior - iWorks are not displaying content of document - it seams blank - just white screen without any borders where should be at least lines in numbers or empty cells.
    Another display problem is in Safari. On same pages (even default Top SItes) it`s flashing and especially when scrolling.
    Did you encountered something similar? I`m not able to get rid of it.
    Computers was used for some time before turining on FIle Vault and problem started to occur after this action. Disabling of FileVault didn`t helped (properly restarted between steps).
    I didn`t found anything strange in Console or elsewhere..

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Strange behavior of Content area

    Hello everybody,
    I'm working with Portal 3.0.8. I've installed czech language on it.
    What did I do is:
    1) I made new look for my navigation bar (new image and basic items). And it worked fine. I worked in English!
    2) Change language to Czech.
    3) Show my content area and there were old items on navigation bar. But style was new. If I navigate to any sub-folder, the look is OK. In the root folder I can't change anything. I can add new items only, though it is possible to see them only when I work in English.
    Does anybody know the reason of this strange behavior and what I should do? Thanks for your help!
    Petra :-)
    P.S.: You can use this email address: [email protected]

    Sorry for copy paste problem. b1 should be replaced with y1 and c1 with z1.
    Here is the correct code.
    create table xmltab of XMLType XMLTYPE store as binary xml;
    Table created.
    insert into xmltab values('<x><y>y1</y><z>z1</z></x>');
    1 row created.
    select x.object_value
    from xmltab x
    where extractValue(x.object_value,'/x/y')='y1' and
    extractValue(x.object_value,'/x/z')='z1' ;
    OBJECT_VALUE
    <x>
      <y>y1</y>
      <z>z1</z>
    </x>
    The following query doesn't return any row!!
    select x.object_value
    from xmltab x
    where extractValue(x.object_value,'/x/y')='y1' and
    extractValue(x.object_value,'/x/z')='z1' for update;
    no rows selected
    select x.object_value
    from xmltab x
    where extractValue(x.object_value,'/x/y')='y1' for update;
    OBJECT_VALUE
    <x>
      <y>y1</y>
      <z>z1</z>
    </x>
    select x.object_value
    from xmltab x
    where extractValue(x.object_value,'/x/z')='z1' for update;
    OBJECT_VALUE
    <x>
      <y>y1</y>
      <z>z1</z>
    </x>
    The following one returns correct result !!
    select x.object_value, extractValue(x.object_value,'/x/y'), extractValue(x.object_value,'/x/z')
    from xmltab x
    where extractValue(x.object_value,'/x/y')='y1' and
    extractValue(x.object_value,'/x/z')='z1' ;
    OBJECT_VALUE
    EXTRACTVALUE(X.OBJECT_VALUE,'/x/y')
    EXTRACTVALUE(X.OBJECT_VALUE,'/x/z')
    <x>
      <y>y1</y>
      <z>z1</z>
    </x>
    y1
    z1
    I get expected result for all the cases if the table is created in the following way
    create table xmltab of XMLType;
    Can anyone tell me why does select for update behaves in this strange way for binary xml table?

  • Strange behavior of Aliases

    Ever since switching to OS 10.5, I have had a strange situation with aliases and the file to which they point. After selecting an alias, and pressing Command+R, the window will display the actual source file in its actual location, as always. Then, if I use the back-left arrow in the left side of the title bar (or Command+[ ) to return to the folder containing the alias, that folder will appear to contain the original file in addition to the alias. In reality, that file is really in its original location and it only appears to be in both places. If I move the phantom file to the desktop, the real file will disappear from its real location. Has anyone else experienced this strange behavior?

    red_menace wrote:
    I also noticed that the contextual menu item to show the original works differently than the main menu item.
    On my system, the contextual menu behaves the same way. Using the back arrow to return to the original folder shows both the file and its alias. Leaving that folder and returning removes the phantom file, as you observed.

  • Strange behaviors

    I was in the Finder going through my files trying to free up some disk space and some strange behaviors happened. As I go through the media files (video clips, flash files, etc.) they automatically play even though I did NOT hit the space bar to invoke Quicklook option and it happens to all of the files in that folder. Now I wasn't bothered by that, just thought it was strange however what I found interesting is as all of these happening is the Apple Menu Bar is disappear but as I move the mouse up top it reappear as if it has a hide menu bar and unhide the menu bar as I hover over with the mouse. Does that mean that it is possible to do a hide/unhide menu bar option? Never seen that before, does anyone else experience this?

    Welcome to Apple Discussions.
    8lias wrote:
    Does that mean that it is possible to do a hide/unhide menu bar option?
    No, it only means you are able to do it because there is some corruption either in your Home folder or in the system. Let's find out:
    Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
    Open System Preferences >> Accounts >> "+" make it an admin account.
    If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    (Note: If you are running build 9C7010 do not install the Update.)
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
    If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    Let us know.
    -mj

  • Can anyone Reproduce This screencast? Strange behavior from Mac

    https://drive.google.com/file/d/0B5LXJD4aR7maZng4cnl6Z2UxS28/edit?usp=sharing
    1.  Open finder and click go
    2.  go to /var
    3.  click on var alias and go to at file
    After you open the /var/at folder there is a file called at.deny
    4.  Click on the file called at.deny and open with other application
    You can only open it with Imessage, applemail or text edit.  Notice in the screen cast that it automatically sends the at.deny file to any address that I type in I message. 
    5.  You can also click on chron.deny and you can send that file automatically in Imessage or applemail.  IS THIS NORMAL.
    I AM PRETTY MUCH A NOVICE, BUT THIS MAC HAS SOME STRANGE BEHAVIORS.  COULD THIS BE WHAT THEY CALL A BACKDOOR????APPLE JUST SCRATCHES THEIR HEAD??????]

    This is a file that is located at /var/db/caches/opendirectory/cache_mbr
    Does any other mac users have this type of file

  • Strange behavior when "trying" to burn a disk.

    At least I think this is strange behavior, following the instructions in the help viewer, topic "Backing up your music to a CD or DVD." One thing for sure, it's not burning a disc and it ain't telling me why.
    I select the playlist and click "Burn Disc"
    Requests a blank disc. I insert one.
    Message "checking media"
    after about a minute, the disc ejects
    Message "checking media" displays another 30 seconds
    No other messages displayed.
    What the ??? Shouldn't it at least display an error message??
    Super-Drive information..... from System Profiler
    MATSHITA DVD-R UJ-845C:
    Firmware Revision: DPP9
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: No
    Using Sony DVD+R discs.
    Mac Mini   Mac OS X (10.4.8)  

    Whoops, sorry, this was while burning a playlist.
    I've also tried some Pleomax CD disks (Samsung), with no luck. I've tried burning directly from iTunes, and from Toast 7.
    Of the types I've tried, the Sony DVD's have been the best for me. Haven't tried many types though. Maybe I can get disks one at a time until I find a brand my burner likes.
    Still, isn't it strange that there is NO error message? It just quits?
    Mac Mini   Mac OS X (10.4.8)  

  • Strange Behavior with gMSA in Server 2012 R2

    Greetings,
    I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
    self-managed environments.
    We created a Group Managed Service Account using the following article:
    http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
    Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
    and I believe that the strange behavior I am seeing may have something to do with this - described below: 
    As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
    attached).
    I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
    Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
    All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
    I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
    Nick

    VIvian,
    Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
    However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
    PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
    Test-AdServiceAccount : The server has rejected the client credentials.
    At line:1 char:1
    + Test-AdServiceAccount gMSA$
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
        + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
       ctiveDirectory.Management.Commands.TestADServiceAccount
    If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
    PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
    True
    Is this normal?
    Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
    you think there is something wrong with my gMSA accounts based on the information I have provided.
    Nick

  • Strange behavior - icon thumbnail instead of image - CC@OSX10.10

    Hi,
    my CC (@OS X 10.10.3) showing a strange behavior using vanishing point filter.
    After defining grid and try to paste the image OS X paste the icon thumbnail instead of the image,
    Many thanks in advance!!
    br
    Joachim

    It is probably related to the fact that you are setting the tables row height in the renderer this will fire a render message when the height changes. One height is applied to all rows of a table. This means that is you have images of different heights you are continually changing the tables row height and therefore continually rendereing.
    My approach would be to have all the images fit into a set size ( say 64*64 ( with scaling if neccesary ) you could then have a popup show the full size image if required.

  • Strange behavior in report Output

    Hi,
    Strange behavior in report output , please some one help me out of this problem.
    I am using Oracle order capture rdf file ASOPQTEL.rdf.
    My working environment:
    Windows,apps instance .Now this rdf file is working fine in my work Environment.
    when this same file is deployed in client environment (UNIX and different apps instance from my working environment apps instance)
    for some cases it is giving output.
    for some cases it's throughing error.
    Thanks,
    Mithun

    Please specify what kind of error you are getting and what is command you are firing on Unix.

  • Strange behavior of the Macbook pro display

    Hi to all
    I'm using my MacBook pro, and notice some strange behavior after open several windows or applications, I don't know how to explain, so here is a photo:
    http://www.flickr.com/photos/86155326@N00/
    I have tried: go back to 10.4.6 / create a new account / Hardware test... and Nothing.
    Any suggestions?
    Pedro

    I am having the exact same problem(and no one is replying to my post either), I read in another post of someone who had a somewhat similar issue and someone commented that it was bad VRAM and warranted the logic board to be replaced. I'm hoping this is not the case, or at least hoping the problem does not get worse because I am in school and can't be without this computer for 2 weeks while it gets repaired..I'm hoping I can last til the holidays...
    pictures of my problem:
    http://www.rpi.edu/~neala/pics/display/Messed%20up%20desktop.png
    http://www.rpi.edu/~neala/pics/display/Picture%204.png
    Sometimes I can make it go away by moving windows, and sometimes that makes it worse... this computer is only 100 days old...come on apple..help us out!

  • Report FP_TEST_00 - Strange behavior

    Hello Gurus,
    A strange behavior with report FP_TEST_00 occurs:
    SA38 --> FP_TEST_00 --> select a device --> execute --> print preview then and error or popup is show:
    Adobe Reader
    Error initializing the font server module
    Then the SAP GUI is closed, I check the ST22 and no dump is generated and in transaction SM21 only appear:
    DP  Q0  4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
    DP  Q0  I Operating system call recv failed (error no. 232 )
    The #1 log entry: *
    Details Page 2 Line 28 System Log: Local Analysis of sapdev                   1
    Time     Type Nr Clt User TCode Grp N Text
    11:37:20 DP                     Q0  4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
    Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
    Details
    Recording at local and central time........................ 25.02.2010 11:37:20
    Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
    11092      Dispatcher                                           K  SAP Web AS Problem STSK
    Further details for this message type
    Module nam Line Error text..........              Caller.... Reason/cal
    dpxxdisp   1223 551  ADMIN       86  HUSVP-SAP-BA DpRTmPr    NiBufRe
    Documentation for system log message Q0 4 :
    The SAP Dispatcher (part of the application server) has lost the
    connection to a terminal process.  For example, this happens when the
    terminal program (GUI) terminates without correctly logging off the
    application server.  More detailed information about the error
    context is not available here.
    Technical details
    File Offset RecFm System log type             Grp N variable message data
       21 254340 m     Error (Function,Module,Row) Q0  4 551  ADMIN       86  HUSVP-SAP-BA     DpRTmPrNiBufRedpxxdisp1223
    The #2 Log show: *
    Details Page 2 Line 29 System Log: Local Analysis of sapdev                   1
    Time     Type Nr Clt User TCode Grp N Text
    11:37:20 DP                     Q0  I Operating system call recv failed (error no. 232 )
    Operating system call recv failed (error no. 232 )
    Details
    Recording at local and central time........................ 25.02.2010 11:37:20
    Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
    11092      Dispatcher                                           K  SAP Web AS Problem STSK
    Further details for this message type
    Module nam Line Error text        Caller.... Reason/cal
    nixxi.cp   4435           recv232 NiIRead    recv
    Documentation for system log message Q0 I :
    The specified operating system call was returned with an error.
    For communication calls (receive, send, etc) often the cause of errors
    are network problems.
    It could also be a configuration problem at operating system level.
    (file cannot be opened, no space in the file system etc.).
    Additional specifications for error number 232
    Name for errno number ECONNRESET
    No documentation available for error ECONNRESET
    Technical details
    File Offset RecFm System log type             Grp N variable message data
      21 254520 m     Error (Function,Module,Row) Q0  I           recv232                     NiIReadrecv   nixxi.cp4435
    Edited by: Hernando Polania Cadena on Feb 25, 2010 8:36 PM

    Hello All,
    I applied the solution in page
    http://wiki.sdn.sap.com/wiki/display/PLM/Adobe%209%20-%20SAPGUI%20crash
    Works OK
    Thanks
    Hernando

  • Strange behavior when I try to match a mpeg2 video with the menu size image

    hello all,
    got a strange behavior when I try to match a mpeg2 video with the menu size image,
    menu size is 1920 x 1080 (photoshop file)
    mpeg2 video 1920 x 1080 (1second 19 frames)
    the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
    I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
    everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
    why encore treats the video size and picture differently?
    it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
    thankl you all

    Hi all
    I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
    Using Encore,PS,AE CS4
    DVD format SD PAL DV widescreen
    I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
    In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
    When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
    Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
    In the properties panel the menu Aspect Ratio 16:9
    The AE transistions PAR is SD PALwidescreen 1.4587.
    I did try the Blu Ray suggestion above but the same distortion was apparent.
    Any suggestions short of squashing the video to match the menu would be welcomed.
    Thanks

Maybe you are looking for

  • Composite control - change text property of textbox from .cs file

    Hi All, I have created a composite control with dropdowns and hiddenfield for datepicker. Now when I change the value of dropdown from browser - client side then its value is retained on postback. But when I change value programmatically its not refl

  • Inserting table background image

    I just upgraded from DW8 to CS4 and can't figure out how to insert an image for a table background! The box and folder icon to browse to the file I want is greyed out. Can anyone help?

  • Only see Apple icon on the screen

    The Apple icon appears on the screen only, the Apple TV (2nd generation) is blinking. Reset produces no result. Any ideas?

  • Boot Camp, XP, Macbook Pro and a Cinema Display

    Add these things together and what do you get? Frustration enough to beat my head against the wall. If I get my Cinema Display to work at all when connected to the MBP in XP, it's because I said a prayer to Bill Gates, or I looked away at just the ri

  • Full repair doubt

    Hello! I deleted 2 documents in a DSO and from PSA either. I need to reload those documents. I wanna do a Full repair load. My question is. Must I have to delete all the setup tables (LBWG) of these model and fill it with the 2 documents to do the fu