Strange behavior in safari autocomplete function

Good day
Today I was testing my java application and I noticed a strange safari behavior in autocomplete function. I'm going to explain better the problem: my java application is a simple rest web service deployed in jboss7, so when i call an url like 127.0.0.1:8080/myws/testit my application prints in the log file "test successful". I've noticed that when i search the url in my address bar and i find it in the log the phrase "test succesful" appears even if I've not yet pressed the enter key to confirm that I want to go to that url. So I've thought that autocomplete function calls that url also when the user has not yet confirmed the operation. Why does safari do this? I've tried with other browsers but thet work correctly.
Thanks a lot

Similar Messages

Is it possible to add multiple contacts to Safari autocomplete for iPads used by more than one person regularly?

If there are multiple regular users who both want to take advantage of the Safari autocomplete function for forms can you add multiple people in Settings?

No, that's not possible.

Strange Behavior with gMSA in Server 2012 R2

Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
Nick

VIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
    + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
   ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick

Strange Behavior from iTunes 7.2

Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
Major pain and very time consuming.
So it is not adding songs correctly, but through way too much effort able to work around this.
2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
Any suggestions??
Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.

First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
Have you repaired permissions with Disk Utility?
Is your Quicktime up to date? At least version v7.1.5.
MJ

Report FP_TEST_00 - Strange behavior

Hello Gurus,
A strange behavior with report FP_TEST_00 occurs:
SA38 --> FP_TEST_00 --> select a device --> execute --> print preview then and error or popup is show:
Adobe Reader
Error initializing the font server module
Then the SAP GUI is closed, I check the ST22 and no dump is generated and in transaction SM21 only appear:
DP Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
DP Q0 I Operating system call recv failed (error no. 232 )
The #1 log entry: *
Details Page 2 Line 28 System Log: Local Analysis of sapdev                   1
Time     Type Nr Clt User TCode Grp N Text
11:37:20 DP                     Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
11092      Dispatcher                                           K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text..........              Caller.... Reason/cal
dpxxdisp   1223 551 ADMIN       86 HUSVP-SAP-BA DpRTmPr    NiBufRe
Documentation for system log message Q0 4 :
The SAP Dispatcher (part of the application server) has lost the
connection to a terminal process. For example, this happens when the
terminal program (GUI) terminates without correctly logging off the
application server. More detailed information about the error
context is not available here.
Technical details
File Offset RecFm System log type             Grp N variable message data
   21 254340 m     Error (Function,Module,Row) Q0 4 551 ADMIN       86 HUSVP-SAP-BA     DpRTmPrNiBufRedpxxdisp1223
The #2 Log show: *
Details Page 2 Line 29 System Log: Local Analysis of sapdev                   1
Time     Type Nr Clt User TCode Grp N Text
11:37:20 DP                     Q0 I Operating system call recv failed (error no. 232 )
Operating system call recv failed (error no. 232 )
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
11092      Dispatcher                                           K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text        Caller.... Reason/cal
nixxi.cp   4435           recv232 NiIRead    recv
Documentation for system log message Q0 I :
The specified operating system call was returned with an error.
For communication calls (receive, send, etc) often the cause of errors
are network problems.
It could also be a configuration problem at operating system level.
(file cannot be opened, no space in the file system etc.).
Additional specifications for error number 232
Name for errno number ECONNRESET
No documentation available for error ECONNRESET
Technical details
File Offset RecFm System log type             Grp N variable message data
21 254520 m     Error (Function,Module,Row) Q0 I           recv232                     NiIReadrecv   nixxi.cp4435
Edited by: Hernando Polania Cadena on Feb 25, 2010 8:36 PM

Hello All,
I applied the solution in page
http://wiki.sdn.sap.com/wiki/display/PLM/Adobe%209%20-%20SAPGUI%20crash
Works OK
Thanks
Hernando

Strange behavior when I try to match a mpeg2 video with the menu size image

hello all,
got a strange behavior when I try to match a mpeg2 video with the menu size image,
menu size is 1920 x 1080 (photoshop file)
mpeg2 video 1920 x 1080 (1second 19 frames)
the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
why encore treats the video size and picture differently?
it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
thankl you all

Hi all
I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
Using Encore,PS,AE CS4
DVD format SD PAL DV widescreen
I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
In the properties panel the menu Aspect Ratio 16:9
The AE transistions PAR is SD PALwidescreen 1.4587.
I did try the Blu Ray suggestion above but the same distortion was apparent.
Any suggestions short of squashing the video to match the menu would be welcomed.
Thanks

Strange behavior with Zoom and Image control

HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

Strange behavior in Financial Reports (drop down feature)

Hello Gurus,
I have currently performed migration of Financial Reports from 11.1.1.3 environment to 11.1.2.2 environment with the help of a staging environment.
We migrated the reports over to 11.1.2.2 using LCM from the Staging 11.1.2.2 environment.
We are observing some strange behavior with the Financial Reports that have drop down functionality in our new environment.
When we open a report in our current environment (113) and select a particular member (India) from the Page dimension(Page has almost 30 members in it) it returns appropriate data, however when the same report is opened in new environment (122) and when we select the same member(India), it does not return appropriate data(Page has almost 30 members in it).
However if we design a sample report with the same member in the page (Page has only 1 member (India)) and then open the report it shows correct data.
So the issue occurs only when we have more than 1 members in page and it works as expected when we have only 1 member in page.
Any help would be highly appreciated.
Thanks,
hyperionEPM

Hello Neeraj,
We are trying to understand the potential reason as to why is it causing this. Is there anything similar caught in .303 patch?? I will have a look at the .303 patch readme.
Thanks,
hyperionEPM

Strange Behavior of program while using BAPI_PO_CREATE1

Hello SAP GURUs,
I've created an Upload Program using BAPI_PO_CREATE1 for Mass Service PO Creation.
When I execute the program and Specify the File for uploading, It Gives me errors as
E     BAPI     1     No instance of object type PurchaseOrder has been created. External reference:
E     MEPO     0     Purchase order still contains faulty items
E     6     436     In case of account assignment, please enter acc. assignment data for item
But when I come back to Selection Screen of the Program and specify the SAME FILE AGAIN and Execute,
The Program runs successfully and generates the PO number.
I have never seen such strange behavior in any BAPIs before.
Pls help..

PERFORM refresh_tables.
PERFORM fill_tables.
END-OF-SELECTION.
Display the Summary as an ALV Grid Display
IF NOT ig_mymssg[] IS INITIAL.
    PERFORM display_basic_list . "Grid Display
ELSE.
    MESSAGE s000 WITH 'No data exists'(051).
    STOP.
ENDIF.
*&      Form refresh_tables
      text
--> p1        text
<-- p2        text
FORM refresh_tables .
REFRESH:   ig_fieldcat,
             ig_mymssg,
             poitem,
             poitemx,
             poaccount,
             poaccountx,
             poservices,
             ig_return.
            wt_itab, record, record2 .
ENDFORM.                    " refresh_tables
*&      Form fill_tables
      text
--> p1        text
<-- p2        text
FORM fill_tables .
record2[] = record[].
record3[] = record[].
DELETE ADJACENT DUPLICATES FROM record COMPARING id_no.
DELETE ADJACENT DUPLICATES FROM record2 COMPARING id_no po_item.
SELECT MAX( packno ) FROM esll INTO wrk_packno.
LOOP AT record.
    CLEAR : poheader, poheaderx, wa_poitem, wa_poitemx, wa_poservices, wa_poaccount, wa_poaccountx, wa_poschedulex, wa_poschedule.
    REFRESH: poitem, poitemx, poaccount, poaccountx, poservices, ig_return, posrvaccessvalues, poschedule, poschedulex.
    PERFORM po_header.
    LOOP AT record2 WHERE id_no = record-id_no.
      wrk_packno = wrk_packno + 1.
      PERFORM po_item.
      PERFORM po_scheudle.
      PERFORM acc_assignment.
      PERFORM po_services.
    ENDLOOP.
    PERFORM create_po.
ENDLOOP.
ENDFORM.                    " fill_tables
*&      Form display_basic_list
      text
--> p1        text
<-- p2        text
FORM display_basic_list .
g_repid = sy-repid.
PERFORM f2000_fieldcat_init .
PERFORM display_alv_grid_1.
ENDFORM.                    " display_basic_list
*&      Form f2000_fieldcat_init
      text
--> p1        text
<-- p2        text
FORM f2000_fieldcat_init .
REFRESH ig_fieldcat.
PERFORM fill_fields_of_fieldcatalog USING 'IG_MYMSSG'
                                              'STATUS'
                                                c_x
                                                'Status'
                                                '10'.
PERFORM fill_fields_of_fieldcatalog USING 'IG_MYMSSG'
                                            'RECORD'
                                            c_x
                                            'Record'
                                            '20'.
PERFORM fill_fields_of_fieldcatalog USING 'IG_MYMSSG'
                                            'ERRMSG'
                                            'Message'
                                            '100'.
ENDFORM.                    " f2000_fieldcat_init
*&      Form display_alv_grid_1
      text
--> p1        text
<-- p2        text
FORM display_alv_grid_1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = g_repid
      i_structure_name   = 'IG_MYMSSG'
      i_grid_title       = 'LOG'
      is_layout          = wg_layout
      it_fieldcat        = ig_fieldcat[]
      i_save             = c_save
    TABLES
      t_outtab           = ig_mymssg
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " display_alv_grid_1
*&      Form fill_fields_of_fieldcatalog
      text
     -->P_0626   text
     -->P_0627   text
     -->P_C_X text
     -->P_0629   text
     -->P_0630   text
FORM fill_fields_of_fieldcatalog USING    p_tabname TYPE slis_tabname
                                           p_field TYPE slis_fieldname
                                           p_key TYPE c
                                           p_name
                                           len.
To fill in the fields of the table fieldcatalog depending on the field
CLEAR wg_fieldcat.
wg_fieldcat-fieldname = p_field. " The field name and the table
wg_fieldcat-tabname = p_tabname.. " name are the two minimum req
wg_fieldcat-key = p_key. " Specifies the column as a key
wg_fieldcat-seltext_l = p_name. " Column Header
wg_fieldcat-outputlen = len.
APPEND wg_fieldcat TO ig_fieldcat.
ENDFORM.                    " fill_fields_of_fieldcatalog
*&      Form create_po
      text
--> p1        text
<-- p2        text
FORM create_po .
CLEAR : wg_return.
REFRESH : ig_return.
CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
      poheader          = poheader
      poheaderx         = poheaderx
    IMPORTING
      exppurchaseorder = po_no
    TABLES
      return            = ig_return
      poitem            = poitem
      poitemx           = poitemx
      poschedule        = poschedule
      poschedulex       = poschedulex
      poaccount         = poaccount
      poaccountx        = poaccountx
      poservices        = poservices
      posrvaccessvalues = posrvaccessvalues.
SORT ig_return BY type.
READ TABLE ig_return INTO wg_return WITH KEY type = 'S'.
IF sy-subrc EQ 0.
    CLEAR : wg_return.
    REFRESH : ig_return.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    CLEAR wg_errmsg.
    WRITE icon_green_light AS ICON TO wg_errmsg-status.
    CONCATENATE record-id_no po_no INTO wg_errmsg-record SEPARATED BY '/'.
   wg_errmsg-record = po_no.
    wg_errmsg-errmsg = 'PO created'.
    APPEND wg_errmsg TO ig_mymssg.
ELSE.
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    READ TABLE ig_return INTO wg_return WITH KEY type = 'E' TRANSPORTING message.
    CLEAR wg_errmsg.
    WRITE icon_red_light AS ICON TO wg_errmsg-status.
    wg_errmsg-record = record-id_no.
    wg_errmsg-errmsg = wg_return-message.
    APPEND wg_errmsg TO ig_mymssg.
ENDIF.
ENDFORM.                    " create_po
*&      Form po_header
      text
--> p1        text
<-- p2        text
FORM po_header .
poheader-comp_code   = record-comp_code.
poheader-doc_type    = record-doc_type.
poheader-vendor      = record-vendor.
poheader-purch_org   = 'SERV'.
poheader-pur_group   = record-pur_group.
poheader-currency    = 'INR'.
poheaderx-comp_code   = 'X'.
poheaderx-doc_type    = 'X'.
poheaderx-vendor      = 'X'.
poheaderx-purch_org   = 'X'.
poheaderx-pur_group   = 'X'.
poheaderx-currency    = 'X'.
ENDFORM.                    " po_header
*&      Form po_item
      text
--> p1        text
<-- p2        text
FORM po_item .
DATA : days TYPE num2.
DATA : final_dt TYPE datum.
DATA : is_ok TYPE boole_d.
DATA : msg_hndlr TYPE REF TO if_hrpa_message_handler.
days = 20.
CALL FUNCTION 'HR_ECM_ADD_PERIOD_TO_DATE'
   EXPORTING
     orig_date       = sy-datum
     num_days        = days
     signum          = '+'
     message_handler = msg_hndlr
   IMPORTING
     result_date     = final_dt
     is_ok           = is_ok.
CLEAR: wa_poitem,wa_poitemx.
wa_poitem-po_item      = record2-po_item.
wa_poitem-short_text   = record2-short_text.
wa_poitem-plant        = record2-plant.
wa_poitem-matl_group   = 'S001'.
wa_poitem-tax_code     = 'LA'.
wa_poitem-item_cat     = item_cat.
wa_poitem-pckg_no      = wrk_packno.
wa_poitem-acctasscat   = acctasscat.
wa_poitem-gr_to_date   = final_dt.
APPEND wa_poitem TO poitem.
wa_poitemx-po_item      = record2-po_item.
wa_poitemx-po_itemx      = 'X'.
wa_poitemx-short_text   = 'X'.
wa_poitemx-plant        = 'X'.
wa_poitemx-tax_code     = 'X'.
wa_poitemx-item_cat     = 'X'.
wa_poitemx-acctasscat   = 'X'.
wa_poitemx-pckg_no      = 'X'.
wa_poitemx-matl_group   = 'X'.
wa_poitem-gr_to_date    = 'X'.
APPEND wa_poitemx TO poitemx.
ENDFORM.                    " po_item
*&      Form PO_SERVICES
      text
--> p1        text
<-- p2        text
FORM po_services .
CLEAR: wa_poservices, wa_posrvaccessvalues.
wa_poservices-pckg_no = wrk_packno.
wa_poservices-line_no = '0000000001'.
wa_poservices-outl_ind = 'X'.
wa_poservices-subpckg_no = wa_poservices-pckg_no + 1.
wa_poservices-from_line = '000001'.
APPEND wa_poservices TO poservices.
CLEAR wa_poservices.
wrk_packno = wrk_packno + 1.
wa_poservices-pckg_no = wrk_packno.
wa_poservices-line_no = '0000000002'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = record2-service
    IMPORTING
      output = record2-service.
wa_poservices-ext_line = '0000000010'.
wa_poservices-service = record2-service.
wa_poservices-quantity = record2-quantity.
wa_poservices-gr_price = record2-gr_price.
wa_posrvaccessvalues-pckg_no = wrk_packno.
wa_posrvaccessvalues-line_no = '0000000002'.
wa_posrvaccessvalues-serial_no = '01'.
wa_posrvaccessvalues-serno_line = '01'.
wa_posrvaccessvalues-quantity = record2-quantity.
wa_posrvaccessvalues-net_value = record2-gr_price.
APPEND wa_poservices TO poservices.
APPEND wa_posrvaccessvalues TO posrvaccessvalues.
ENDFORM.                    " PO_SERVICES
*&      Form ACC_ASSIGNMENT
      text
--> p1        text
<-- p2        text
FORM acc_assignment .
DATA : tmp_gl LIKE bapimepoaccount-gl_account.
tmp_gl = '400265'.
CLEAR : wa_poaccount, wa_poaccountx.
wa_poaccount-po_item      = record2-po_item.
wa_poaccount-serial_no    = '01'.
wa_poaccount-co_area      = '1000'.
wa_poaccount-quantity     = record2-quantity.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = tmp_gl
    IMPORTING
      output = wa_poaccount-gl_account.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = record2-orderid
    IMPORTING
      output = wa_poaccount-orderid.
APPEND wa_poaccount TO poaccount.
wa_poaccountx-po_item      = record2-po_item.
wa_poaccountx-serial_no    = '01'.
wa_poaccountx-co_area      = 'X'.
wa_poaccountx-quantity     = 'X'.
wa_poaccountx-gl_account   = 'X'.
wa_poaccountx-orderid      = 'X'.
APPEND wa_poaccountx TO poaccountx.
ENDFORM.                    " ACC_ASSIGNMENT
*&      Form PO_SCHEUDLE
      text
--> p1        text
<-- p2        text
FORM po_scheudle .
CLEAR : wa_poschedule, wa_poschedulex.
wa_poschedule-po_item = record2-po_item.
wa_poschedule-sched_line = '0001'.
wa_poschedule-del_datcat_ext = 'D'.
wa_poschedule-delivery_date = sy-datum.
wa_poschedule-quantity = record2-quantity.
APPEND wa_poschedule TO poschedule.
wa_poschedulex-po_item = record2-po_item.
wa_poschedulex-sched_line = '0001'.
wa_poschedulex-po_itemx = 'X'.
wa_poschedulex-sched_linex = 'X'.
wa_poschedulex-del_datcat_ext = 'X'
wa_poschedulex-delivery_date = 'X'.
wa_poschedulex-quantity = 'X'.
APPEND wa_poschedulex TO poschedulex.
ENDFORM.                    " PO_SCHEUDLE

Strange behavior of StuffIt-Expander

Hi there,
having heard of the "new viri" for Mac OSX I turned over to MacFixIt and similar sites to check what's to do.
The first advice I read was to "un-check" the "open 'safe' files automatically in Safari" option in the Safari preferences. So I did and all files I was downloading ended unchanged (= un-expanded) in my download-folder. So far, so good.
Now I wanted to expand one <filename>.dmg.gz with double-clicking it. StuffItExpander started, the the message: "StuffItExpander unexpectedly quits" poped up.
I couldn't expand my d/l files, none! Even with dragging/dropping the file onto the StuffIt icon I had no results.
Made some brainstorming and resulted in the one point: The only thing I changed in the last time, was indeed the "un-checking" of the open-option in the Safari preferences.
So I went to the Safari preferences again and "checked" this option, turning it on.
And you are right: Now I could expand my d/l files like I always could.
So, how comes?? Is it only me, where StuffIt shows such a strange behavior? What can I do? Perhaps a re-installation of StuffIt?
Any help is appreciated.
AndreasB
iMac G5 1.8 17" Mac OS X (10.4.4) Ext. FireWire Drive, Brother DCP-110C Printer

Andreas, see if this article helps. A lot of folk were plagued with this wee bug, including me. The linked article solved my problem

Strange behavior of system with enabled FileVault2, Roaming profile

Hello,
I have encountered strange behavor of my Macbook Air after some testing.
Macbook Air 2012 was newly installed with 10.8.4 and joined network account server on 10.8.4 server with Roaming profile (synced with server home directory). After installing some basic apps like iWork I turned on FileVault.
Then I start to have the strange behavior - iWorks are not displaying content of document - it seams blank - just white screen without any borders where should be at least lines in numbers or empty cells.
Another display problem is in Safari. On same pages (even default Top SItes) it`s flashing and especially when scrolling.
Did you encountered something similar? I`m not able to get rid of it.
Computers was used for some time before turining on FIle Vault and problem started to occur after this action. Disabling of FileVault didn`t helped (properly restarted between steps).
I didn`t found anything strange in Console or elsewhere..

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Strange behavior of JTable..Help plz

Hi,
Assume i have 5 rows in my JTable. I wrote a function on right click i get a popup window with an option delete row, which deletes the row successfully,
The problem is when i sort the data in JTable. on column click JTable is getting sorted, in which assume 2nd row got replaced with 4th row and vice versa.
Now when i try to delete the 4th row, it is delete the 2nd row data, which was there at the place of 4th row before sorting. In this regard i am trying to print the row number before deleting. It is displaying as 4th, but deleting 2nd row.
Hope i am clear. Please suggest me in solving this strange behavior of JTable sorting problem.
Regards,
Ravi

MyTableModel tablemodel = new MyTableModel(colnames,values);
TableSorter sorter = new TableSorter(tablemodel);
JTable table = new JTable(sorter)
tablemodel.removeRow(row); // last line is the code where i am deleting the row, it's deleting the wrong row.
do i need to remove the last line code and make respective changes in TableSorter.java class.
ore
here itself do i need to do some changes. ?
There is a method that will convert the view row to the model row private Row[] getViewToModel()
my question is how TableSorter.java class comes to know that i am deleting the perticular row.

Strange behavior of GetStringUTFChars in Linux

Good evening!
I made an implementation of a native method in C++ for Windows and Linux, in windows it works fine, but in Linux I have a strange behavior of GetStringUTFChars here is the piece code :
JNIEXPORT jint JNICALL Java_MyNativeMethod
(JNIEnv *env, jobject obj, jstring IpAddress) {
const char * ccpIpAddress = env->GetStringUTFChars(IpAddress, 0);
jsize size = env->GetStringLength(ccpIpAddress);
trace("IpAddress : %s size: %d", ccpIpAddress, size);
Absolute normal... but when I pass as parameter a string '192.168.1.11'
I receive from 'IpAddress : HBĽ1 size: 0' to 'IpAddress : P9D7D6DwD�MS\H#M\H : 251'
I made a little and simple test to print a String to verify if is Linux problem but IT WORKED FINE!
I've notice that the differences between both programs are that the wrong one has been linked with a C lib, but the #define __cplusplus is OK also, and all the compile process use C++ code...
This is my compilation line
g++ -o lib{myLib}.so {myImpl}.cpp lib{C li}.so libstdc++.so -I {JAVA_HOME}/include/ -I {JAVA_HOME}/include/linux/ -shared -static -L{JAVA_HOME}/jre/lib/i386/
(variables put for clarity) and (I tried with gcc also)
the libstrd++.so is been used in my simple test link options too.
I was wondering if there is some -Doption which should be defined that
functions->GetStringChars(this,str,isCopy); implementation ask for...
or if the link with a C code is messing the things in a different behavior
Thanks for the help
Pedro Ribeiro
Sao Paulo - Brazil

JNIEXPORT jint JNICALL Java_MyNativeMethod
(JNIEnv *env, jobject obj, jstring IpAddress) {
const char * ccpIpAddress = env->GetStringUTFChars(IpAddress, 0);
jsize size = env->GetStringLength(ccpIpAddress);
trace("IpAddress : %s size: %d", ccpIpAddress, size);
=====================
You tried to get the string length of C character array.
I think you can get the length of jstring alone.
Please advice me if I am wrong

STRANGE BEHAVIOR OF NVL

Hi everybody,
Can you please explain me this strange behavior of NVL function:
SQL> select nvl(10000,'none') from dual;
select nvl(10000,'none') from dual
ERROR at line 1:
ORA-01722: invalid number
SQL> select nvl('none',10000) from dual;
NVL(
none
Can you explain what goes on internally to make these statements different?
I mean why is it expecting a number(as a second arg) in Case 1 and why is it not expecting a character string as a second arg in Case 2? Has it got to do with implicit type-conversion?
Finally, does NVL need both arguments of the same type?
Any help will be greatly appreciated.
Thanks.
Kishore.

The return type of NVL is the datatype of the first argument. If the two arguments have different datatypes Oracle applies a conversion. That's why you got your results: in effect what you were running was
select nvl(10000,to_number('none')) from dual;and
select nvl('none',to_char(10000)) from dual;Of course, 'none' is not a valid number, hence the ORA-1722 result, whereas 10000 can be successfully rendered as a string.
If you do not provide NVL with arguments of the same datatype it will apply an implicit conversion to the second datatype. It is always better (that is safer) to avoid implicit data conversion.
Cheers, APC
P.S. For bonus points, which argument determines the datatype of a DECODE function?

Strange behavior of db update in debugging and no debugging execution mode

Hi Experts,
I am finding a strange behavior of certain Z update function (to update equipment install base) : The update happens perfectly if I go into debug mode and do a F6 on the function call. But if I executed it completed without going in debug mode, that update does not happen!
I checked the function and found that it does have COMMIT WORK AND WAIT which gets triggered every time I call this function.
Also does compiling the code with some changes and executing in cycles have any affect on the behavior of code? Do I need to do a /nse38 every time, before I do executing? I am not sure this is in any way related to the problem.
Will appreciate your helpful responses on this.
Best regards,
Vishnu T

Withing the Z function, it is the calls to SAP standard functions that are doing the update. Here is the function body
FUNCTION Z_B_BAPI_EQMT_INSTALLHR.
*"*"Local interface:
*"       IMPORTING
*"             VALUE(EQUIPMENT) LIKE BAPI_EQUI-EQUIPMENT
*"             VALUE(SUPEREQUI) LIKE BAPI_EQHR-SUPEREQUI
*"             VALUE(POSEQUI) LIKE BAPI_EQHR-POSEQUI OPTIONAL
*"             VALUE(DATE) LIKE SY-DATUM DEFAULT SY-DATUM
*"             VALUE(TIME) LIKE SY-UZEIT DEFAULT SY-UZEIT
*"             VALUE(COMMIT) LIKE VBMOD-VBMODE DEFAULT SPACE
*"       EXPORTING
*"             VALUE(EQUIMASTER) LIKE BAPI_EQUI STRUCTURE BAPI_EQUI
*"             VALUE(EQUITIME) LIKE BAPI_EQUZ STRUCTURE BAPI_EQUZ
*"             VALUE(EQUITEXT) LIKE BAPI_EQKT STRUCTURE BAPI_EQKT
*"             VALUE(EQUILOCATION) LIKE BAPI_ILOA
*"                             STRUCTURE BAPI_ILOA
*"             VALUE(EQUISALES) LIKE BAPI_EQSD STRUCTURE BAPI_EQSD
*"             VALUE(EQUIHIERARCHY) LIKE BAPI_EQHR
*"                             STRUCTURE BAPI_EQHR
*"             VALUE(RETURN) LIKE BAPIRETURN STRUCTURE BAPIRETURN
CLEAR: EQUIMASTER, EQUITIME, EQUITEXT, EQUILOCATION.
CLEAR: EQUISALES, EQUIHIERARCHY, RETURN.
* Object key must not be initial.
IF EQUIPMENT IS INITIAL.
    CALL FUNCTION 'MESSAGE_SET_AND_CONVERT'
         EXPORTING
              MSG_CLASS = 'IS'
              MSG_TYPE   = 'E'
              MSG_NUMBER = '498'
              MSG_PARM1 = 'EQUIPMENT'
         IMPORTING
              RETURN     = RETURN.
    EXIT.
ENDIF.
* Superior equipment must not be initial.
IF SUPEREQUI IS INITIAL.
    CALL FUNCTION 'MESSAGE_SET_AND_CONVERT'
         EXPORTING
              MSG_CLASS = 'IS'
              MSG_TYPE   = 'E'
              MSG_NUMBER = '498'
              MSG_PARM1 = 'EQUIPMENT'
         IMPORTING
              RETURN     = RETURN.
    EXIT.
ENDIF.
* Specified equipment number must exist.
PERFORM EQUIPMENT_CHECK_VEQUI                             "P9CK056992
    USING                                                   "P9CK056992
      EQUIPMENT "->equipment number                         "P9CK056992
      'X'       "->record must exist (will be read)         "P9CK056992
      'X'       "->record must be locked                    "P9CK056992
      NEW_VEQUI "<-before image read                        "P9CK056992
      I_CODE.   "<-error code                               "P9CK056992
IF I_CODE <> 0.
    CALL FUNCTION 'MESSAGE_CONVERT'
         EXPORTING
              SY_SUBRC = 4
         IMPORTING
              RETURN   = RETURN
         EXCEPTIONS
              OTHERS   = 1.
    EXIT.
ENDIF.
* Superior equipment must exist.
PERFORM EQUIPMENT_CHECK_VEQUI                             "P9CK056992
    USING                                                   "P9CK056992
      SUPEREQUI "->superior technical object number         "P9CK056992
      'X'       "->object must exist (will be read)         "P9CK056992
      SPACE     "->object will not be locked                "P9CK056992
      OLD_VEQUI "<-object data read                         "P9CK056992
      I_CODE.   "<-error code                               "P9CK056992
IF I_CODE <> 0.
    CALL FUNCTION 'MESSAGE_CONVERT'
         EXPORTING
              SY_SUBRC = 4
         IMPORTING
              RETURN   = RETURN
         EXCEPTIONS
              OTHERS   = 1.
    EXIT.
ENDIF.
* Install equipment
CALL FUNCTION 'EQUIPMENT_INSTALL'
       EXPORTING
            READ_SOBJ   = ' '
            READ_ROBJ   = ' '
            LOCK_SOBJ   = ' '                               "P9CK056992
            POSEQUI     = POSEQUI
            I_DATE      = DATE
            I_TIME      = TIME
            EXEC_MEAS   = 'X'                               "P9CK159924
       CHANGING
            S_EQUI      = NEW_VEQUI
            R_EQUI      = OLD_VEQUI
       EXCEPTIONS
            ERR_INSTALL = 1
            OTHERS      = 2.
I_CODE = SY-SUBRC.
* Fill return structure.
CALL FUNCTION 'MESSAGE_CONVERT'
       EXPORTING
            SY_SUBRC = I_CODE
       IMPORTING
            RETURN   = RETURN
       EXCEPTIONS
            OTHERS   = 1.
IF RETURN-TYPE <> 'S'.                                    "P9CK056992
    PERFORM EQUIPMENT_UNLOCK USING EQUIPMENT.               "P9CK056992
    EXIT.                                                   "P9CK056992
ENDIF.                                                    "P9CK056992
* Copy local view structure to export structures.
PERFORM MOVE_VIEW_TO_EQUIPMENT USING NEW_VEQUI EQUIMASTER EQUITIME
                                       EQUITEXT EQUILOCATION EQUISALES
                                       EQUIHIERARCHY.
CALL FUNCTION 'CHECK_COMMIT'
       EXPORTING
            COMMIT_MODE              = COMMIT
       EXCEPTIONS
            ERR_COMMIT_WORK_AND_WAIT = 1
            OTHERS                   = 2.
ENDFUNCTION.
The COMMIT parameter is passed with value 'S' which is an indication to CHECK_COMMIT to do COMMIT WORK AND WAIT. And I am always passing an S and as I said that the update in fact does happen if I do a F6 on the CALL to the above function.

Strange behavior in safari autocomplete function

Similar Messages

Maybe you are looking for