Strange behavior in Tiger Mail - Sending Messages but they don't go through

Hi everyone. I have a perplexing issue that is causing angst in my household. My wife uses a G4 iMac with Tiger 10.4.11. She has a .mac account for email using Apple's "Mail". Up until a few weeks ago, she had no problems with e-mail....coming or going. I made a move to a DSL modem and new ISP provider, and she could not send e-mail anymore. She still receives, but the outgoing messages go only to the outbox. We got her a work-around using the web-based .Mac, but that is not how it is supposed to work. (Our two daughters use their .mac accounts on the same machine, but have no problems sending or receiving.)
I switched back to the cable modem this weekend, and we still experience the same problem. My wife's account does not send, but the kids' accounts still have no problem. I have experimented with the account settings, and it doesn't work for hers, even using the same settings as for the other users. I deleted the account and set it up again, but nothing seems to help. Using the connection doctor, it shows the connections are okay.
This is using port 25 with no SSL, using port 587 with SSL...always the same result. It has even stopped giving error messages. It just goes to the outbox and sits there.
Any suggestions?
Mitch

They use the same ISP and settings. I have tried re-setting up her account, and also using the ISP (Time Warner RoadRunner) to try and force them through. The kids' accounts just go through smtp.mac.com for outgoing mail, but neither works for the wife's account.
Needless to say, I need to fix the wife's account!

Similar Messages

  • I can't send SMS (from Greece) from my iPhone 4 to USA. I mean that i send it but they don't receive it and i don't receive their SMS. Please, could anybody help me?

    I can't send SMS (from Greece) with my iPhone 4 to USA. I mean that i send it but they don't receive it and i don't receive their SMS. Could please anybody help me?

    That's more likely to be a carrier issue than an iPhone issue. You should each contact your respective carriers.

  • I keep trying to send messages but they won't send no matter how many times I try

    I keep trying to send messages on my iPad and they are sending. It was working yesterday

    Are you sure you have a good wifi/internet connection?
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Why is mail sending messages but not receiving?  problem just started.

    not sure that anything has changed on my imac recently.  i am running 10.7.3.  i can send mail but it's not receiving.  help appreciated.

    benhill00,
    Please look over Apple's Mail Setup, Troubleshooting etc.. link. I suspect a setting has just gotten "confused" or become corrupt somehow. Frequently all you need to do is go into the Mail's Account settings and re-input the settings.

  • Mail Sending Messages Before They Are Complete!

    Hey guys, I've had numerous problems with Mail in 10.6.1 (see below) that I never had with 10.4, but this problem is the worst! Mail is sending my messages to their recipient before I finish fully typing the email, so the recipient receives an email that cuts off in mid-sentence! What the heck is going on and how do I fix it?
    Just FYI, here are the other Mail OSX 10.6.1 issues I have had:
    1) I had all kinds of problems syncing Mail with Gmail using IMAP. One of them was I would move messages into a separate folder in Mail, Mail would sync with the Gmail server and create the folder and move the messages, then Mail would go back and retrieve all the emails I had moved and replace them in the old folder!
    2) I had a problem where the mailbox archive feature was only archiving some of the emails in a mailbox, so out of 400 messages, for example, the completed archived mailbox would only have 50 of them.
    3) There's a useful feature the previous build had that got lost. When you attach a picture, then want to attach another one, it makes you find the folder from scratch again instead of opening up the last folder right away.

    Hi and Welcome to Apple Discussions..
    Since you have so many issues with Mail...
    Launch Mail. From the Menu Bar, click Mail / Preferences.
    Make note of all the preferences under each tab.
    Close Mail.
    Locate this file.
    com.apple.Mail.plist
    ~/Library/Preferences.
    Move that file to the Trash and restart your Mac.
    Hopefully that will help...
    This thread might offer help for GMail sync issues.
    http://discussions.apple.com/thread.jspa?threadID=1371040
    Carolyn
    Message was edited by: Carolyn Samit

  • I' m not able to configure email. I can send messages but I can't receive them

    I need your help.....I'm not able to configure email....I can send messages but I can't receive them

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • My i phone 4 will send messages but does not receive them - why?

    My i phone 4 will send messages but does not receive them - why is this?
    e mail works both ways

    Did you already check the general troubleshooting for messages here?
    http://support.apple.com/kb/TS2755

  • My iPhone 5s will send messages, but not receive them. Replies show up on my iPad. How do I fix this?

    Anyone know how to fix imessage and FaceTime issues with iPhone 5s?  I can send messages, but replies only show up on my iPad, not my phone. Can't FaceTime at all, just on iPad.  Says "waiting for activation". Or "Activation unsuccessful. Turn on iMessage to try again."  And a screen comes up "iMessage Activation. An error occurred during activation. Try again."  If I try to log in with my Apple ID, it doesn't work, either. Same problems for FaceTime.
    I have tried all the "fixes" I found on another thread, nothing worked. This is a replacement phone. My first one had problems with the touchpad not working, but the messaging and FaceTime were fine. The touchpad works on this phone. Any suggestions?

    Fixed!! My cellular/internet provider had to do a restore and now it works

  • I still have the most updated version of ios 6 and my messages on imessage no longer sends. It shows the sending message, but then it just disapears and nothing happens.

    Out of nowhere my imessage stopped sending messages, but I have ipod 4 and i can't update to ios 7, but I can't send messages and I don't have the right coverage to talk to real apple employees. Please help.

    iOS: Troubleshooting Messages

  • My mail icon keeps showing 1 message, but I don't have a message.

    My mail Icon on my Iphone keeps showing 1 message, but I don't have any messages.
    How do I make it stop?
    Thanks!

    I have one regular email account and one account that I use to collect text messages from friends with two-way pagers. I have checked all inboxes and they are empty. I have rebooted. I have deleted and recreated the account and when it reappears (the text account) it shows 3 messages but the inbox is empty. I fiqure this has something to do with it being an "[email protected]" account but I have been using it this way for a while and this is the first time I have these ghost messages

  • I can't send messages but I can receive them

    I can't send messages but I can receive them, is it an iOS 7.0.3 issue or Verizon Wireless? Also not receiving data

    Hey Bonaccio,
    Thanks for the question. I understand you are experiencing issues with Messages on your iPhone 5. The following resource may help to resolve your issue:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    I also understand you are experiencing issues with your cellular data connection. These two issues may be related, so definitely give the steps in this article a go:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
    1. Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
    2. Restart your iPhone.
    3. Ensure that your software is up to date:
              - Check for a Carrier Settings Update. Tap Settings > General > About.
              - Check for an iOS Software Update. Tap Settings > General > Software Update. Note: Some updates may require a Wi-Fi connection.
    4. Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
    5. If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
    6. Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
    7. Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    8. Restore the iPhone as new.
    9. Contact your carrier to:
              - Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
              - Verify that there are no account-related blocks.
              - Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
    If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
    Thanks,
    Matt M.

  • HT4245 can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, not

    can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, its not working....

    Please Rephrase your query.

  • HT1668 I have mine set to show 1000 recent messages but they are deleting after 25

    I have my mail messages set to show the last 1000 messages but they are purging after the last 25 messages

    The Show Most Recent setting for email has nothing whatsoever to do with deleting email.
    Are you also accessing this email account with an email client on your computer?

  • [svn] 2384: The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations , but we don't want to introduce this change in a Flex 3.0.x minor release.

    Revision: 2384
    Author: [email protected]
    Date: 2008-07-08 06:23:19 -0700 (Tue, 08 Jul 2008)
    Log Message:
    The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations, but we don't want to introduce this change in a Flex 3.0.x minor release. So I'm reverting this fix from the 3.0.x branch of ASC and checking in a new 1.4 downgraded asc.jar to reflect the change. This will be merged to other Flex 3 branches such as 3.0.3 and 3.1.0, but will not be merged to trunk.
    The change in behavior was noticed for Flex 3.0.x when a asc.jar was updated in revision 2108, and re-applied in revision 2129. Reverting this fix will resolve bug SDK-15924.
    QE: Yes
    Doc: No
    Checkintests: Pass
    Reviewer: Erik
    Bugs:
    SDK-15924 - Calling a .NET WebService always returns a fault (after build 2108)
    Other Bugs Referenced:
    ASC-3414 - with block uses local variable instead of object property when -warnings flag on
    Ticket Links:
    http://bugs.adobe.com/jira/browse/ASC-3414
    http://bugs.adobe.com/jira/browse/SDK-15924
    http://bugs.adobe.com/jira/browse/SDK-15924
    http://bugs.adobe.com/jira/browse/ASC-3414
    Modified Paths:
    flex/sdk/branches/3.1.0/lib/asc.jar
    flex/sdk/branches/3.1.0/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.java

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

  • [svn] 2383: The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations , but we don't want to introduce this change in a Flex 3.0.x minor release.

    Revision: 2383
    Author: [email protected]
    Date: 2008-07-08 06:22:40 -0700 (Tue, 08 Jul 2008)
    Log Message:
    The ASC fix for ASC-3414 resulted in a correction of the behavior of E4X filter expression evaluations, but we don't want to introduce this change in a Flex 3.0.x minor release. So I'm reverting this fix from the 3.0.x branch of ASC and checking in a new 1.4 downgraded asc.jar to reflect the change. This will be merged to other Flex 3 branches such as 3.0.3 and 3.1.0, but will not be merged to trunk.
    The change in behavior was noticed for Flex 3.0.x when a asc.jar was updated in revision 2108, and re-applied in revision 2129. Reverting this fix will resolve bug SDK-15924.
    QE: Yes
    Doc: No
    Checkintests: Pass
    Reviewer: Erik
    Bugs:
    SDK-15924 - Calling a .NET WebService always returns a fault (after build 2108)
    Other Bugs Referenced:
    ASC-3414 - with block uses local variable instead of object property when -warnings flag on
    Ticket Links:
    http://bugs.adobe.com/jira/browse/ASC-3414
    http://bugs.adobe.com/jira/browse/SDK-15924
    http://bugs.adobe.com/jira/browse/SDK-15924
    http://bugs.adobe.com/jira/browse/ASC-3414
    Modified Paths:
    flex/sdk/branches/3.0.3/lib/asc.jar
    flex/sdk/branches/3.0.3/modules/asc/src/java/macromedia/asc/embedding/LintEvaluator.java

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

Maybe you are looking for

  • How to find out why we don't receive e-mail from a deployed application?

    Hi guys, I've deployed a web application which is in production mode on a weblogic server 10.3.2.0, OS linux. In this web application, we send e-mails using javamail library. The mail server is a remote server from this one. At the beginning, all was

  • Burning files to  DVD

    Hi, i have been trying to burn a 850 mb quicktime file and a couple of jpegs to dvd in my super drive. have created disk image and burnt disk all appears good except there is nothing on the dvd . have used both .cdr and .dmg images still same result.

  • Mobile device support won't reinstall?

    my parents bought me a new computer as an early Christmas present (it's Windows 8.1), but iTunes 12 wasn't loading properly when I installed it - so I uninstalled all of the components using the Apple-recommended method and reinstalled iTunes... exce

  • Layout changed when copy and modify standard pz09 service

    Hi, We  have copied the standard PZ09 ITS service (HTML Template, TCode, program) to custom program. Done some changes in custom program and published the service to ITS. But when we test the custom service the the layout looks entirely different. ho

  • HT3325 I am unable to get any version of Keynote Remote to link my devices except version 1.1!

    Is anyone esle having this problem? I have an iPad 3, Keynote '09 and a MBP 2010. I have tried loading Keynote Remote 1.3 (newest version) on several devices and NONE of them will link to my Keynote application on my MBP. I guess that would eliminate