Strange Behavior of Comparative Marker in New Bullet Chart

I put a bullet chart on canvas alonethe comparative marker is bright yellow. I can move it across the canvas fine and the marker doesn't change color. When I put a tab set container on the canvas and move the bullet chart into itin the left hand side of the tab set the marker still shows yellow, but when I move it to the right side--the marker changes to black!
Any ideas?

Hi,
When I created with my own data, it do not give me such problem even if I use "Aqua" theme.
My observation is, when you take to extreme right, it creates a scroll bar. When it creates a scroll bar (i.e. when it goes out of the tab area) it then changes the color to its dark shed. If you move the scrollbars to right, then the color again becomes normal.
I'll suggest, to fit the chart in the size of the TAB. It will work fine. Else as you observed, it works fine with other two themes, then its better to go for those schemes.
Hope this helps.
Regards,
Rashmi

Similar Messages

How do I Fix Strange Behavior in Photos App on new iPhone?!

I have the iPhone 6 Plus, and my photos app is acting very strangely.
I first noticed something odd when I edited a picture and it took about 30 seconds for it to save the edited picture back.
But then I noticed that when I delete pictures from the Recently Added album, the pictures seem to stay there until I back out of the album and then go back in - they don't delete in "real time" like they used to on iOS 7 ...
What should I do? Thanks!

Hey Ericmusic,
Thanks for the question. After reviewing your post, it sounds like you are having trouble with an app. I would recommend that you read these articles, they may be able to help you resolve or isolate the issue.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
Use iTunes to restore your iOS device to factory settings
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Strange behavior of Grapher 2.0

Hello everyone,
I have a problem with vector fields in Grapher.
My Grapher 2.0 (running on Mac OS X 10.5.2 ) shows the following strange behavior:
When I create a new 2D-vector field in any document, it is shown correctly. All vector arrows point in the direction I expect.
When I now save the document and open it again, first the vector field is shown correctly, but one or two seconds later the field collapses and all the vectors are aligned parallel to the x- axis. After reentering the formula describing the field, I get the correct result again.
In the Grapher examples are two items including vector fields. One of them has the same behavior like my own documents, the other has not, but it‘s working well.
I have already deleted the preferences (com.apple.grapher.plist) , but without any success. The program behavior is unchanged.
Does anyone know the cause of this problem, and what I can do to avoid it?
regards woopecker

This is bug nr. 4/22 in my personal Grapher's bugs list. Exists in 2D & 3D.
To restaure a saved .gcx vector field, make a minor change in its equation (e.g. cancel one letter), Return touch, repair the equation, Return touch, your vector field becomes OK !

Strange behavior in the top link bar and open in a new tab

Hello,
I am having a strange behavior in the top link bar. Every element in the menu has the "open in a new tab"-option checked and is working fine but is not working at all in a sub site which inherit the menu.
I have look at the code thinking that the menu in the sub site did't get the target="_blank" but is there.
Anyone who knows what can be happening?
Thanks!!!!
Discusion actualizada

No worries, I found the problem.
Strange but Minimal download strategy feature cause the problem. I unactivated it and everything works fine.
Discusion actualizada

My ipad2 is getting lazy with the wifi. On any router it doesn't get the signal by itself, unless I'm so close that the pad and the antenna are touching. Other solution, to turn off and on again the wifi button on the iPad. This strange behavior is new...

My ipad2 is getting lazy with the wifi. On any router it doesn't get the signal by itself, unless I'm so close that the pad and the antenna are touching. Other solution, to turn off and on again the wifi button on the iPad. This strange behavior is new, before my iPad was blazing fast at getting any known wifi connection. Sme help please ??

it sure sounds like the battery is defect

Strange behavior of the Macbook pro display

Hi to all
I'm using my MacBook pro, and notice some strange behavior after open several windows or applications, I don't know how to explain, so here is a photo:
http://www.flickr.com/photos/86155326@N00/
I have tried: go back to 10.4.6 / create a new account / Hardware test... and Nothing.
Any suggestions?
Pedro

I am having the exact same problem(and no one is replying to my post either), I read in another post of someone who had a somewhat similar issue and someone commented that it was bad VRAM and warranted the logic board to be replaced. I'm hoping this is not the case, or at least hoping the problem does not get worse because I am in school and can't be without this computer for 2 weeks while it gets repaired..I'm hoping I can last til the holidays...
pictures of my problem:
http://www.rpi.edu/~neala/pics/display/Messed%20up%20desktop.png
http://www.rpi.edu/~neala/pics/display/Picture%204.png
Sometimes I can make it go away by moving windows, and sometimes that makes it worse... this computer is only 100 days old...come on apple..help us out!

Strange behavior of textareas in BPEL Worklist (10.1.2)

I have a very strange behavior with linebreaks in all my <textarea>s in the BPEL-Worklist-jsps: (they work fine as <INPUT>s
Example:
Default-text:
line1
I update the textarea to:
line1
line2
-> hit update
line1
*** (second line is completly missing)
-> hitting update again (no change in text)
line2line1
*** (all on one line with the new line in front)
As Value I use:
<%=PayloadFormGenerator.selectNodeValue(payload, "/ns0:task/ns0:payload/ns1:abstract", form.getNamespaceMap(),"string", context.getLocale())%>
and as mentioned: It works fine for <INPUT>.
What do I do wrong? Is this a bug?
Daniel
Message was edited by:
user552073

Had the same problem, could not get it to be consistent. I would say this is a bug, but decided to edit payloads via the database in the end...

Strange behavior with Zoom and Image control

HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

Strange behavior after using NIK plug-ins

Every once in a while I encounter this strange behavior of Aperture. I first process the NEF's in Aperture (white balance, Exposure, Enhance... and, when needed, Cropping) and then I fine tune the image with the NIK plug-ins; when needed DfIne 2.0, Viveza, Color Efex Pro 3.0 and Sharpener Pro 3.0 Output Sharpener.
If I look at the processed picture then, I get a perfect presentation of the photo;
!http://users.skynet.be/fc419085/Aperture-1.jpg!
But when I press Z to zoom into a 100% preview I get this;
!http://users.skynet.be/fc419085/Aperture-2.jpg!
When I select the Loup in the normal view mode I get this;
!http://users.skynet.be/fc419085/Aperture-3.jpg!
This doesn't happen with all my pictures, yesterday I processed a series of 8 pictures an 6 of them showed this behavior the other two acted normal and I can't see what I did differently whit these last two.
When I export the strangely behaving photo's to a Tiff or a Jpeg, I get perfectly normal pictures.
The original NEF behaves normal. I have seen this behavior with NEF's from a Nikon D200, D2x and a D300. I have Aperture 2.1.2 running on a 2.33 GHz Intel Core Duo MacBook Pro running Mac OS X 10.5.6
Does anybody know what's happening and if so, how to solve this problem?
Cheers,
Ivan

I did some testing and what I found is too weird to be true.
First this mashed up look doesn't only happen after using NIK plug-ins, it also happens when making a roundtrip to Photoshop, given that certain conditions are met.
Give it a try yourself. Crop an image to an uneven pixelcount dimension, for example 4227 x 2797 and make a roundtrip to Photoshop. Then have a 100% view look at the new image in Aperture. You'll have a mashed up view, at least I do.
Now crop the same original image to an even pixelcount dimension, for example 4228 x 2798 and make an roundtrip to Photoshop once more. When you have a 100% view of the new image now, you'll see a perfectly normal photo.
Do you think Aperture developers are reading this forum?

Strange Behavior connecting to Oracle

Hi to All,
On Server Windows 2003 I have installed Oracle 10g R2. On this Server run Toad for Oracle.
If I run Oracle console, all work fine; running Toad the ORA-12154 error is displayed.
I have tried to connect to DB with Toad from a client and all works.
Have someone an idea on this strange behavior ?
Thank You and Best Regards
Gaetano

This may be a problem?NO!
12154, 00000, "TNS:could not resolve the connect identifier specified"
// *Cause: A connection to a database or other service was requested using
// a connect identifier, and the connect identifier specified could not
// be resolved into a connect descriptor using one of the naming methods
// configured. For example, if the type of connect identifier used was a
// net service name then the net service name could not be found in a
// naming method repository, or the repository could not be
// located or reached.
// *Action:
//   - If you are using local naming (TNSNAMES.ORA file):
//      - Make sure that "TNSNAMES" is listed as one of the values of the
//        NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA)
//      - Verify that a TNSNAMES.ORA file exists and is in the proper
//        directory and is accessible.
//      - Check that the net service name used as the connect identifier
//        exists in the TNSNAMES.ORA file.
//      - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
//        file. Look for unmatched parentheses or stray characters. Errors
//        in a TNSNAMES.ORA file may make it unusable.
//   - If you are using directory naming:
//      - Verify that "LDAP" is listed as one of the values of the
//        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA).
//      - Verify that the LDAP directory server is up and that it is
//        accessible.
//      - Verify that the net service name or database name used as the
//        connect identifier is configured in the directory.
//      - Verify that the default context being used is correct by
//        specifying a fully qualified net service name or a full LDAP DN
//        as the connect identifier
//   - If you are using easy connect naming:
//      - Verify that "EZCONNECT" is listed as one of the values of the
//        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA).
//      - Make sure the host, port and service name specified
//        are correct.
//      - Try enclosing the connect identifier in quote marks.
//   See the Oracle Net Services Administrators Guide or the Oracle
//   operating system specific guide for more information on naming.This error is clear.
SQL*Net is being asked to resolved TNS_ALIAS & it reports that it can not find the requested name.
EITHER
1) the requested name is not correct
or
2) SQL*Net is looking in the wrong tnsnames.ora file & still not finding the requested name.
Good Luck solving your mystery

I get a strange behavior of the tab bar and of the location bar in Firefox 29.0 for Mac.

I have just installed Firefox 29.0 for Mac.
I get a strange behavior of the tab bar and of the location bar with this new version.
Instead of the location bar, I get two rows of symbols. And it's impossible to write anything in the location bar.
(I'd like to add a screenshot, but I cannot find a way to do it.)

Thank you for your tip.
I found the culprit: it was an extension called RSS Icon 1.0.6.
I removed it and now Firefox 29.0 is working perfectly.
Now I'll have to find a replacement for that extension.
Thank you once again. Your tip was essential.

Creating new bullets

I attempted using a trial version of iWork '08 in order to get away from Microsoft. However, not even the local genius bar could help me to change my bullets like in MS. In MS, I can not only create new bullets easily but assign keystrokes to easily change from one bullet to another. I have read on the Internet after extensive searching to find that everyone is saying that Pages is not capable of this. Surely Apple, who makes great computers, has software that is comparable to Office. What word processor can I use to get away from MS?

jerryandveva wrote:
I attempted using a trial version of iWork '08 in order to get away from Microsoft. However, not even the local genius bar could help me to change my bullets like in MS. In MS, I can not only create new bullets easily but assign keystrokes to easily change from one bullet to another. I have read on the Internet after extensive searching to find that everyone is saying that Pages is not capable of this. Surely Apple, who makes great computers, has software that is comparable to Office.
Maybe Pages authors doesn' think that it is really an useful feature and apply the 80% rule.
What word processor can I use to get away from MS?
openOffice or neoOffice
Yvan KOENIG (from FRANCE jeudi 8 mai 2008 15:19:35)
PS: for those which don't know it here is the 80% rule (extract from Apple Human Interface Guide)
+Apply the 80 Percent Solution+
+During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚Äîthat is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.+
+If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.+

Strange behavior in entity bean : get Timestamp

Hello:
I'm working with SUNONE 7 AppServer , over SunOS 5.9
I've a strange behavior with entity's get methods which return Timestamp value.
For example, I've got
Timestamp date;
If I do
entity.setF(date) , ( date is a Timestamp with value "12/12/2005 12:30:00" )
all works right, and in database is wrote right ( "12/12/2005 12:30:00" )
But , if I do
date = entity.getF()
the, date variable has the value "12/12/2005 00:00:00"
So, in get method is lost the time value of a Timestamp data
Could be a code bug in my source , but if I use Jboss AS over Windows XP , all work right ( set and get methods ). The database is the same one ( Oracle 9i )

Well, I found the solution.
The problem was the ojdbc14.jar driver, which made wrong schema files.
Exactly, with the bad ojdbc14.jar, generated this entry
<_type>91</_type>
when the right one for date types ( Timestamp ) is
<_type>93</_type>
I dont know why the new ojdbc14.jar works fine, but I paste its size
good ojdbc14.jar : 1181679 bytes

Strange Behavior in modifying the values in VO

I have a VO based on EO from a custom table. The query is something like:
select EO.x, EO.y, (EO.x*EO.y) xy from EO
I have displayed the values from this VO on to a table in OAF page. All the columns are messageTextInput but the third column (xy) is read-only. I have written a fireAction to execute when x or y values are changed to update the xy value accordingly.
Code in CO:
if ("ValueChange".equals(pageContext.getParameter(EVENT_PARAM)))
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("UpdateXY");
pageContext.forwardImmediately(<Same Page>, null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null, null, true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
Code in AM:
public void UpdateXY()
xxVOImpl vo = getxxVO1();
Row r = vo.first();
while (vo.hasNext())
r = vo.next();
Object X = r.getAttribute("X");
String X_string = X.toString();
float X_value = Float.parseFloat(X_string);
Object Y = r.getAttribute("Y");
String Y_string = Y.toString();
float Y_value = Float.parseFloat(Y_string);
Float XY = new Float(X_value*Y_value);
r.setAttribute("XY",(Object)XY);
The problem is as follows. During the first time I try to update a value, the control goes through the logic and returns to the page but the XY value is not updated. But if i change a second value and tab out, the codes works and displays both the updated values of XY. From then on, the code is working fine.
I'm also not updating the first row and so I didnt perform any logic in AM for the first row.
Please help me out in finding out the reason for this strange behavior.

This nature is fine, basically initially your EO x and y columns are null and unless you do a commit, these values don't go in db. The third column will take x and Y coumns values from db and multiply and will get null.
To solve this issue, you get the values from VO columns x and y in PPR and and put x*y in the third column of Vo, IN THAT ROW.or you can directly get hold of the bean which hold the value of x*y and use setValue after getting x*y.
---Mukul

Strange behavior in updating and standbying

Hi,
In the last 4 weeks I've been facing some strange behavior from my iPhone 4. First, sometimes when I pick it up its screen is already on (dimmed) and showing the lock screen (with some elements missing though). Secondly, and more annoying yet, when I try to update the apps via app store the initial process occurs normally but after loading the first app it begins installing it and keeps in it forever. I have to soft reset the phone. After that, the app (that kept installing) seems ok. So, I repeat the process of update from the beginning (app after app).
I've already tried to hard reset the device without any luck with any of the problems. Any suggestions about what is going on?
Thanks
Adriano

Hi,
I'm not clear on the distinction you're making for type of access.
Well, to be honest, now that I've re-read that this morning I'm not completely sure what I had in mind either. I think I was thinking about using the collection in what I believe the documentation calls "slices". However, given the other information you've posted it doesn't seem like that would be a feasible alternative in any case.
I understand what you mean about varray and nested-table with the upper-bound limit for the varray's... I've not actually compared the two for performance so my idea that there may be a difference could be completely incorrect. Beyond that, creating code that only works in batches (or slices) may be less performant than what you currently have.
I hope I've not detracted from the thread and maybe someone else with more experience will have an "ah ha!" sort of observation.
Regards,
Mark

Strange Behavior of Comparative Marker in New Bullet Chart

Similar Messages

Maybe you are looking for