Strange behavior of listener
I am running to databases on my oracle 8.1.7.
For one of the database say A the behavior of listener is normal,but for the other say B its behavior is very strange.
i am using the same listener for both the database , can that be reason of problem ?
If i've to connect this database B from a remote machine i need to restart the listener everytime, while at the same time i can connect to the database B from the machine running database.
i got the following error at remote machine if i don't restart the listener :-
ORA-12541: TNS:no listener
but when i check the listener status it tell that its running and i was able to connect to database at local machine without any difficulty, also the lisnter.log captured the unsuccessful attempt as connection established.
Shutting down the database A , doesn't help much as other than starting for everytime i got advantage of starting after few more connections.
i don't know much about setup of database and managing of two instance of database.
has everybody else faced this error before ?
thanks
my tnsnames.ora is as follows -
A.LOCALDOMAIN =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = A)
B.LOCALDOMAIN =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = B)
INST1_HTTP.LOCALDOMAIN =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = B)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA.LOCALDOMAIN =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
B is the database instance with which i am getting the problem.
Similar Messages
-
Strange Behavior from iTunes 7.2
Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
Major pain and very time consuming.
So it is not adding songs correctly, but through way too much effort able to work around this.
2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
Any suggestions??
Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
Have you repaired permissions with Disk Utility?
Is your Quicktime up to date? At least version v7.1.5.
MJ -
Adding custom navigation rules results in strange behavior
Hello,
We'd like to add navigation rules to our application. To avoid post-JHeadstart-generation-steps we created an extra faces-config-custom.xml file which contains the navigation rules. When adding this file to the web.xml and run the aplication we encounter strange behavior
- Errors are shown in duplicate
- 'Transaction completed' messages are not shown
Try adding the underneath faces-config-custom.xml to a standard HR demo project and you will get the same behavior.
(1) What is the reason of this strange behavior?
(2) How can we add custom navigation rules, without having to do post creation steps?
Regards Leon
[faces-config-custom.xml]
<?xml version="1.0" encoding="windows-1252" ?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config xmlns="http://java.sun.com/JSF/Configuration">
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>BezwaarVerzoeken</from-outcome>
<to-view-id>/pages/inboeken/BezwaarVerzoeken.jspx</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>LosseOpdrachten</from-outcome>
<to-view-id>/pages/inboeken/LosseOpdrachten.jspx</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>
[Add faces-config-custom.xml to web.xml]
<context-param>
<param-name>javax.faces.CONFIG_FILES</param-name>
<param-value>/WEB-INF/faces-config-custom.xml,...Leon,
When you perform a drag and drop operation, JDeveloper adds the following lines to the faces-config.xml:
<lifecycle>
<phase-listener>
Oracle.adf.controller.faces.lifecycle.ADFPhaselistener
</phase-listener>
</lifecycle>
However, JHeadstart uses its own subclass of ADFPhaselistener, and defines the lifecycle element in JhsCommon-beans.xml. Due to a bug in ADF, ADF does not look for the lifecycle element in other files than faces-config, and adds its own element in faces-config.xml If you remove these lines, everything works fine again.
To prevent this from happening again, you can move the following entry from JhsCommon-beans.xml to faces-config.xml:
<lifecycle> <phase-listener>oracle.jheadstart.controller.jsf.lifecycle.JhsADFPhaseListener</phase-listener>
</lifecycle>
And then make a custom template for JhsCommon-beans.vm where you remove this entry.
Steven Davelaar,
JHeadstart team. -
Strange behavior with Bindings??
Hello to all JavaFX 2 Binding experts,
I have a strange behavior with Bindings in JavaFX 2.2 (Java 1.7 update 21). Please have a look at the following source code:
package test;
import javafx.application.Application;
import javafx.beans.binding.BooleanBinding;
import javafx.beans.property.SimpleBooleanProperty;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.fxml.FXML;
import javafx.fxml.FXMLLoader;
import javafx.scene.Parent;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.control.RadioButton;
import javafx.stage.Stage;
public class BindingVsProperty extends Application
@FXML
private RadioButton opt11;
@FXML
private RadioButton opt12;
@FXML
private RadioButton opt21;
@FXML
private RadioButton opt22;
@FXML
private Label lbl11And21;
@Override
public void start(Stage arg0) throws Exception
FXMLLoader l_loader = new FXMLLoader();
l_loader.setLocation(BindingVsProperty.class.getResource("BindingVsproperty.fxml"));
l_loader.setController(this);
l_loader.load();
Scene l_scene = new Scene((Parent)l_loader.getRoot());
arg0.setScene(l_scene);
useBinding1();
//useBinding2();
//useBinding3();
arg0.show();
private void useBinding1() // NOT WORKING - ChangeListener.changed(..) is not called
BooleanBinding l_andOpt11Opt21 = opt11.selectedProperty().and(opt21.selectedProperty());
l_andOpt11Opt21.addListener(new ChangeListener<Boolean>()
@Override
public void changed(ObservableValue<? extends Boolean> arg0, Boolean arg1, Boolean arg2)
System.out.println("Opt 1.1 AND Opt 2.1 changed to: " + arg2);
private void useBinding2() // OK - ChangeListener.changed(..) is called
BooleanBinding l_andOpt11Opt21 = opt11.selectedProperty().and(opt21.selectedProperty());
lbl11And21.visibleProperty().bind(l_andOpt11Opt21);
l_andOpt11Opt21.addListener(new ChangeListener<Boolean>()
@Override
public void changed(ObservableValue<? extends Boolean> arg0, Boolean arg1, Boolean arg2)
System.out.println("Opt 1.1 AND Opt 2.1 changed to: " + arg2);
private void useBinding3() // NOT WORKING - ChangeListener.changed(..) is not called
BooleanBinding l_andOpt11Opt21 = opt11.selectedProperty().and(opt21.selectedProperty());
new SimpleBooleanProperty(false).bind(l_andOpt11Opt21);
l_andOpt11Opt21.addListener(new ChangeListener<Boolean>()
@Override
public void changed(ObservableValue<? extends Boolean> arg0, Boolean arg1, Boolean arg2)
System.out.println("Opt 1.1 AND Opt 2.1 changed to: " + arg2);
public static void main(String[] args)
launch(args);
<?xml version="1.0" encoding="UTF-8"?>
<?import java.lang.*?>
<?import java.util.*?>
<?import javafx.scene.control.*?>
<?import javafx.scene.layout.*?>
<?import javafx.scene.paint.*?>
<BorderPane id="BorderPane" maxHeight="-Infinity" maxWidth="-Infinity" minHeight="-Infinity" minWidth="-Infinity" prefWidth="371.0" xmlns:fx="http://javafx.com/fxml">
<center>
<AnchorPane prefHeight="200.0" prefWidth="200.0">
<children>
<Label id="lblAnd" fx:id="lbl11And21" layoutX="82.0" layoutY="121.0" text="Group1 Opt1 AND Group2 Opt1 is true" textFill="#41cc00" visible="false" />
<RadioButton fx:id="opt21" layoutX="216.0" layoutY="24.0" mnemonicParsing="false" text="Group 2 - Opt 1">
<toggleGroup>
<ToggleGroup fx:id="group2" />
</toggleGroup>
</RadioButton>
<RadioButton fx:id="opt22" layoutX="216.0" layoutY="67.0" mnemonicParsing="false" text="Group 2 - Opt 2" toggleGroup="$group2" />
<RadioButton fx:id="opt11" layoutX="29.0" layoutY="24.0" mnemonicParsing="false" text="Group 1 - Opt 1">
<toggleGroup>
<ToggleGroup fx:id="group1" />
</toggleGroup>
</RadioButton>
<RadioButton fx:id="opt12" layoutX="29.0" layoutY="67.0" mnemonicParsing="false" text="Group 1- Opt 2" toggleGroup="$group1" />
</children>
</AnchorPane>
</center>
</BorderPane>
What I need for my application is the use case in useBinding1(), i.e., a BooleanBinding where several listeners are attached to. The problem is that I never get a callback in the ChangeListener if one of the RadioButton.selectedProperty() is changed.
Now I tried what happens if I use the same BooleanBinding for another binding to a property plus the listener, now the listener gets callbacks as expected! (see useBinding2() )
Than I thought may be Bindings must be bound in order to trigger listeners and tried useBinding3() where I bind the BooleanBinding to a new BooleanProperty, in this case the listener doesn't get callback anymore...
And now I'm very frustrated and hope that anyone out there can help me to understand this strange behavior.
Thanks a lot!
WhiteAntelopeAll these work just fine for me: the listeners are all called as expected. Note that the listener is only invoked when the value of the binding actually changes, which doesn't happen every time a radio button is pressed. (For example, if both buttons are unselected, the binding is false. If one button is selected, the binding remains false and the listener is not invoked. When the second button is selected, the binding becomes true, and the listener is invoked.)
-
Strange behavior after suspend.
Hi,
For some time I have a strange behavior of my system after I awake my computer(after suspend). This problem don't disappear after update.
Ok, so if I suspend my computer, and awake him I can't run any program. Even if i was open some application, this application crashes. I have to restart my machine.
Somebody had similar problem or know how help?
I'm using Arch Linux x64, kernel 3.8, openbox. Suspend by "systemctl suspend".OK, maybe good idea is paste here my output journal:
# journalctl --since=today | tac | sed -n '/-- Reboot --/{n;:r;/-- Reboot --/q;p;n;b r}' | tac
-- Logs begin at Mon 2012-09-10 20:20:07 CEST, end at Thu 2013-03-28 10:17:18 CET. --
Mar 28 10:10:36 localhost kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Mar 28 10:10:36 localhost systemd[1]: Time has been changed
Mar 28 10:10:36 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
Mar 28 10:10:36 localhost kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Mar 28 10:10:36 localhost dhcpcd[1435]: eth1: carrier lost
Mar 28 10:10:36 localhost kernel: PM: Entering mem sleep
Mar 28 10:10:36 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Stopping disk
Mar 28 10:10:36 localhost kernel: cfg80211: Calling CRDA for country: PL
Mar 28 10:10:36 localhost kernel: <6>[fglrx] IRQ 46 Disabled
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Preparing suspend fglrx in kernel.
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Suspending fglrx in kernel completed.
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Power down the ASIC .
Mar 28 10:10:36 localhost kernel: PM: suspend of devices complete after 1126.292 msecs
Mar 28 10:10:36 localhost kernel: PM: late suspend of devices complete after 0.263 msecs
Mar 28 10:10:36 localhost kernel: r8169 0000:09:00.0: System wakeup enabled by ACPI
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
Mar 28 10:10:36 localhost kernel: PM: noirq suspend of devices complete after 52.988 msecs
Mar 28 10:10:36 localhost kernel: ACPI: Preparing to enter system sleep state S3
Mar 28 10:10:36 localhost kernel: PM: Saving platform NVS memory
Mar 28 10:10:36 localhost kernel: Disabling non-boot CPUs ...
Mar 28 10:10:36 localhost kernel: smpboot: CPU 1 is now offline
Mar 28 10:10:36 localhost kernel: smpboot: CPU 2 is now offline
Mar 28 10:10:36 localhost kernel: smpboot: CPU 3 is now offline
Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
Mar 28 10:10:36 localhost kernel: ACPI: Low-level resume complete
Mar 28 10:10:36 localhost kernel: PM: Restoring platform NVS memory
Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
Mar 28 10:10:36 localhost kernel: CPU0: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: Enabling non-boot CPUs ...
Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 1 APIC 0x4
Mar 28 10:10:36 localhost kernel: CPU1: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: CPU1 is up
Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Mar 28 10:10:36 localhost kernel: CPU2: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: CPU2 is up
Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 3 APIC 0x5
Mar 28 10:10:36 localhost kernel: CPU3: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: CPU3 is up
Mar 28 10:10:36 localhost kernel: ACPI: Waking up from system sleep state S3
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: MMC controller base frequency changed to 50Mhz.
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: MMC cards are now supported by standard SDHCI controller
Mar 28 10:10:36 localhost kernel: PM: noirq resume of devices complete after 133.780 msecs
Mar 28 10:10:36 localhost kernel: PM: early resume of devices complete after 0.127 msecs
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1a.0: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: mei 0000:00:16.0: irq 43 for MSI/MSI-X
Mar 28 10:10:36 localhost kernel: snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Mar 28 10:10:36 localhost kernel: pci 0000:00:1e.0: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: ahci 0000:00:1f.2: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X
Mar 28 10:10:36 localhost kernel: r8169 0000:09:00.0: System wakeup disabled by ACPI
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Power up the ASIC
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Preparing resume fglrx in kernel.
Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Resuming fglrx in kernel completed.
Mar 28 10:10:36 localhost kernel: <6>[fglrx] IRQ 46 Enabled
Mar 28 10:10:36 localhost kernel: ata5: SATA link down (SStatus 0 SControl 300)
Mar 28 10:10:36 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 28 10:10:36 localhost kernel: ata2.00: configured for UDMA/100
Mar 28 10:10:36 localhost kernel: usb 2-1.3: reset low-speed USB device number 3 using ehci-pci
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
Mar 28 10:10:36 localhost kernel: firewire_core 0000:07:00.3: rediscovered device fw0
Mar 28 10:10:36 localhost kernel: usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
Mar 28 10:10:36 localhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 28 10:10:36 localhost kernel: ata1.00: configured for UDMA/133
Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Starting disk
Mar 28 10:10:36 localhost kernel: PM: resume of devices complete after 2478.795 msecs
Mar 28 10:10:36 localhost kernel: PM: Finishing wakeup.
Mar 28 10:10:36 localhost kernel: Restarting tasks ... done.
Mar 28 10:10:36 localhost kernel: video LNXVIDEO:00: Restoring backlight state
Mar 28 10:10:36 localhost slim[806]: Conky: can't open /sys/class/power_supply/BAT0/uevent: No such file or directory
Mar 28 10:10:36 localhost slim[806]: Conky: can't open /proc/acpi/battery/BAT0/state: No such file or directory
Mar 28 10:10:36 localhost systemd-sleep[4208]: System resumed.
Mar 28 10:10:36 localhost dbus-daemon[800]: dbus[800]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Mar 28 10:10:36 localhost dbus[800]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Mar 28 10:10:36 localhost su[4307]: (to root) root on none
Mar 28 10:10:36 localhost su[4307]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:36 localhost systemd[1]: Starting Daemon for power management...
Mar 28 10:10:36 localhost su[4307]: pam_unix(su:session): session closed for user root
Mar 28 10:10:36 localhost su[4328]: (to root) root on none
Mar 28 10:10:36 localhost su[4328]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:36 localhost su[4328]: pam_unix(su:session): session closed for user root
Mar 28 10:10:36 localhost systemd[1]: Started Suspend.
Mar 28 10:10:36 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
Mar 28 10:10:36 localhost systemd[1]: Stopping Sleep.
Mar 28 10:10:36 localhost systemd[1]: Stopped target Sleep.
Mar 28 10:10:36 localhost systemd[1]: Starting Suspend.
Mar 28 10:10:36 localhost systemd[1]: Reached target Suspend.
Mar 28 10:10:36 localhost systemd-logind[796]: Operation finished.
Mar 28 10:10:36 localhost laptop-mode[4441]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4446]: enabled, active [unchanged]
Mar 28 10:10:36 localhost logger[4463]: ACPI action undefined: ACPI0003:00
Mar 28 10:10:36 localhost laptop-mode[4501]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4509]: enabled, active [unchanged]
Mar 28 10:10:36 localhost laptop-mode[4534]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4539]: enabled, active [unchanged]
Mar 28 10:10:36 localhost laptop-mode[4554]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4557]: enabled, active [unchanged]
Mar 28 10:10:36 localhost laptop-mode[4562]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4563]: enabled, active [unchanged]
Mar 28 10:10:36 localhost dbus-daemon[800]: dbus[800]: [system] Successfully activated service 'org.freedesktop.UPower'
Mar 28 10:10:36 localhost dbus[800]: [system] Successfully activated service 'org.freedesktop.UPower'
Mar 28 10:10:36 localhost systemd[1]: Started Daemon for power management.
Mar 28 10:10:37 localhost ntpd[1442]: Deleting interface #3 eth1, 192.168.1.6#123, interface stats: received=135, sent=135, dropped=1, active_time=4197 secs
Mar 28 10:10:37 localhost ntpd[1442]: 149.156.70.60 interface 192.168.1.6 -> (none)
Mar 28 10:10:37 localhost ntpd[1442]: 149.156.24.40 interface 192.168.1.6 -> (none)
Mar 28 10:10:37 localhost ntpd[1442]: 46.250.172.2 interface 192.168.1.6 -> (none)
Mar 28 10:10:37 localhost ntpd[1442]: peers refreshed
Mar 28 10:10:38 localhost su[4624]: (to root) root on none
Mar 28 10:10:38 localhost su[4624]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:38 localhost laptop-mode[4653]: Laptop mode
Mar 28 10:10:38 localhost laptop-mode[4654]: enabled, active [unchanged]
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: carrier acquired
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: rebinding lease of 192.168.1.6
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: acknowledged 192.168.1.6 from 192.168.1.1 `TP-LINK'
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: checking for 192.168.1.6
Mar 28 10:10:38 localhost su[4624]: pam_unix(su:session): session closed for user root
Mar 28 10:10:38 localhost su[4660]: (to root) root on none
Mar 28 10:10:38 localhost su[4660]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:38 localhost su[4660]: pam_unix(su:session): session closed for user root
Mar 28 10:10:38 localhost kernel: EXT4-fs (sda6): re-mounted. Opts: commit=0
Mar 28 10:10:38 localhost kernel: EXT4-fs (sda7): re-mounted. Opts: commit=0
Mar 28 10:10:38 localhost laptop-mode[4694]: Laptop mode
Mar 28 10:10:38 localhost laptop-mode[4695]: enabled, active [unchanged]
Mar 28 10:10:38 localhost logger[4698]: ACPI action undefined: ACPI0003:00
Mar 28 10:10:38 localhost slim[806]: tint2 : invalid option "task_margin",
Mar 28 10:10:38 localhost slim[806]: upgrade tint2 or correct your config file
Mar 28 10:10:38 localhost slim[806]: tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
Mar 28 10:10:38 localhost slim[806]: X Error of failed request: BadWindow (invalid Window parameter)
Mar 28 10:10:38 localhost slim[806]: Major opcode of failed request: 21 (X_ListProperties)
Mar 28 10:10:38 localhost slim[806]: Resource id in failed request: 0x18000b0
Mar 28 10:10:38 localhost slim[806]: Serial number of failed request: 12
Mar 28 10:10:38 localhost slim[806]: Current serial number in output stream: 12
Mar 28 10:10:40 localhost slim[806]: you have no weather alerts
Mar 28 10:10:40 localhost slim[806]: processing complete
Mar 28 10:10:40 localhost slim[806]: gathering data with curl
Mar 28 10:10:40 localhost slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
Mar 28 10:10:40 localhost slim[806]: Dload Upload Total Spent Left Speed
Mar 28 10:10:40 localhost slim[806]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: (nil); Unknown error
Mar 28 10:10:40 localhost slim[806]: not checking for alerts
Mar 28 10:10:40 localhost slim[806]: curl attempt timed out, trying again
Mar 28 10:10:40 localhost slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
Mar 28 10:10:40 localhost slim[806]: Dload Upload Total Spent Left Speed
Mar 28 10:10:40 localhost slim[806]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: (nil); Unknown error
Mar 28 10:10:42 localhost dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:43 localhost dhcpcd[1435]: eth1: leased 192.168.1.6 for 259200 seconds
Mar 28 10:10:45 dhcppc4 ntpd[1442]: Listen normally on 6 eth1 192.168.1.6 UDP 123
Mar 28 10:10:45 dhcppc4 ntpd[1442]: peers refreshed
Mar 28 10:10:45 dhcppc4 ntpd[1442]: new interface(s) found: waking up resolver
Mar 28 10:10:45 dhcppc4 slim[806]: Traceback (most recent call last):
Mar 28 10:10:45 dhcppc4 slim[806]: File "/home/rlk120/.scripts/gmail.py", line 9, in <module>
Mar 28 10:10:45 dhcppc4 slim[806]: msg=temp.read()
Mar 28 10:10:45 dhcppc4 slim[806]: File "/usr/lib/python3.3/encodings/ascii.py", line 26, in decode
Mar 28 10:10:45 dhcppc4 slim[806]: return codecs.ascii_decode(input, self.errors)[0]
Mar 28 10:10:45 dhcppc4 slim[806]: UnicodeDecodeError: 'ascii' codec can't decode byte 0xc5 in position 375: ordinal not in range(128)
Mar 28 10:10:45 dhcppc4 slim[806]: not checking for alerts
Mar 28 10:10:45 dhcppc4 slim[806]: curl attempt timed out, trying again
Mar 28 10:10:45 dhcppc4 slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
Mar 28 10:10:45 dhcppc4 slim[806]: Dload Upload Total Spent Left Speed
Mar 28 10:10:46 dhcppc4 slim[806]: [234B blob data]
Mar 28 10:10:46 dhcppc4 dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:50 dhcppc4 dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:50 dhcppc4 dhcpcd[1435]: eth1: no IPv6 Routers available
Mar 28 10:11:03 dhcppc4 slim[806]: No protocol specified
Mar 28 10:11:03 dhcppc4 slim[806]: (chromium:4750): Gtk-WARNING **: cannot open display: :0.0
Mar 28 10:11:31 dhcppc4 systemd-logind[796]: System is rebooting.
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Daemon for power management...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Authorization Manager...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping ACPI event daemon...
Mar 28 10:11:32 dhcppc4 ntpd[1442]: ntpd exiting on signal 15
Mar 28 10:11:32 dhcppc4 acpid[793]: exiting
Mar 28 10:11:32 dhcppc4 dhcpcd[4810]: sending signal 1 to pid 1435
Mar 28 10:11:32 dhcppc4 dhcpcd[4810]: waiting for pid 1435 to exit
Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: received SIGHUP, releasing
Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: eth1: releasing lease of 192.168.1.6
Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: eth1: removing interface
Mar 28 10:11:33 dhcppc4 slim[806]: Conky: received SIGHUP or SIGUSR1. reloading the config file.
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 200200 requests (200197 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: Conky: received SIGHUP or SIGUSR1. reloading the config file.
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 4 (Interrupted system call) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 226 requests (226 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: real transparency off.... depth: 24
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Found crtc's: 4
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Linking output LVDS with crtc 0
Mar 28 10:11:33 dhcppc4 slim[806]: real transparency off.... depth: 24
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Found crtc's: 4
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Linking output LVDS with crtc 0
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 534585 requests (534585 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 163909 requests (163909 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: you have no weather alerts
Mar 28 10:11:33 dhcppc4 slim[806]: processing complete
Mar 28 10:11:33 dhcppc4 kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 28 10:11:33 dhcppc4 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Mar 28 10:11:33 dhcppc4 netcfg-daemon[4777]: :: siec_domowa down [done]
Mar 28 10:11:33 dhcppc4 slim[806]: Server terminated successfully (0). Closing log file.
Mar 28 10:11:33 dhcppc4 laptop-mode[4865]: Laptop mode
Mar 28 10:11:33 dhcppc4 laptop-mode[4866]: enabled, active [unchanged]
Mar 28 10:11:34 dhcppc4 systemd[1]: slim.service: main process exited, code=exited, status=1/FAILURE
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped SLiM Simple Login Manager.
Mar 28 10:11:34 dhcppc4 systemd[1]: Unit slim.service entered failed state
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Permit User Sessions...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Permit User Sessions.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Load Kernel Modules...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Load Kernel Modules.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Apply Kernel Variables...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Apply Kernel Variables.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Setup Virtual Console...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Setup Virtual Console.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Set Up Additional Binary Formats...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Set Up Additional Binary Formats.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /home...
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /tmp...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /tmp.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /home.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
Mar 28 10:11:35 dhcppc4 systemd[1]: Set hardware watchdog to 10min.
Mar 28 10:11:35 dhcppc4 kernel: watchdog watchdog0: watchdog did not stop!
Mar 28 10:11:35 dhcppc4 systemd-journal[131]: Journal stopped
Somebody probably find interesting things in this code.
And here is some fail slim:
# journalctl /usr/lib/systemd/systemd --since=today
-- Logs begin at Mon 2012-09-10 20:20:07 CEST, end at Thu 2013-03-28 10:37:18 CET. --
Mar 28 10:10:36 localhost systemd[1]: Time has been changed
Mar 28 10:10:36 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
Mar 28 10:10:36 localhost systemd[1]: Starting Daemon for power management...
Mar 28 10:10:36 localhost systemd[1]: Started Suspend.
Mar 28 10:10:36 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
Mar 28 10:10:36 localhost systemd[1]: Stopping Sleep.
Mar 28 10:10:36 localhost systemd[1]: Stopped target Sleep.
Mar 28 10:10:36 localhost systemd[1]: Starting Suspend.
Mar 28 10:10:36 localhost systemd[1]: Reached target Suspend.
Mar 28 10:10:36 localhost systemd[1]: Started Daemon for power management.
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Daemon for power management...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Authorization Manager...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping ACPI event daemon...
Mar 28 10:11:34 dhcppc4 systemd[1]: slim.service: main process exited, code=exited, status=1/FAILURE
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped SLiM Simple Login Manager.
Mar 28 10:11:34 dhcppc4 systemd[1]: Unit slim.service entered failed state
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Permit User Sessions...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Permit User Sessions.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Load Kernel Modules...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Load Kernel Modules.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Apply Kernel Variables...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Apply Kernel Variables.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Setup Virtual Console...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Setup Virtual Console.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Set Up Additional Binary Formats...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Set Up Additional Binary Formats.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /home...
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /tmp...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /tmp.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /home.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
Mar 28 10:11:35 dhcppc4 systemd[1]: Set hardware watchdog to 10min.
Last edited by xorgx3 (2013-03-28 10:52:08) -
CDI events is a nice feature, but I discovered a strange behavior in Glassfish 3.1.1.
An event generated by a ApplicationScoped bean will not be propagated to all SessionScoped bean listener methods.
For example: supose that you call ‘fire(“text”)’ on Producer bean, and we have 2 instances of Consumer bean. The ‘fired’ method on Consumer bean will be invoked only for one instance. The second Consumer instance will not be notificated.
@Named
@ApplicationScoped
public class Producer {
@Inject @Any
private Event event;
public void fire(String message) {
event.fire(message);
@Named
@SessionScoped
public class Consumer {
public void fired(@Observes String event) {
// do something…
I think that there is something wrong. Maybe with Weld? I don't know yet. What do you think?
Edited by: user2048425 on 09/10/2011 07:14
Edited by: user2048425 on 09/10/2011 07:22Kdcypher wrote:
We seem to have an intermittent problem with recurring events. It seems as though if the organizer of the event makes too many changes to an existing recurring event, it can cause the event to disappear from invitee's calendars, but not necessarily all of the invitee's calendars.What interface(s) are you using to edit the events e.g. Calendar Express, UWC/CE, Convergence, Outlook Connector, Lightning plugin?
What version of Calendar Server are you using (./showrev -p | grep ics5)?
We're in the process of experimenting with it on our test server and gathering information about this issue before submitting it to Sun support, but in the meantime, I thought I'd see if anyone here had heard of such a thing.This problem isn't ringing any bells. If you can duplicate the problem in your test environment that would be a good start.
Regards,
Shane. -
If I'd like to start up the www listener (on port 80),
the whole system gets locked up and a lot of %CPU is used.
All other listeners starts quite all right.
Then I get:
Your request could not be...
and quite often this happens. So it's nearly NOT USABLE,
the OWAS 3.0.x. What could be the cause for the strange
behavior. Also heard, should use another www listener
such as Netscape, but that's not the solution.
nullFirst of all, if you want to start a listener at port:80, the
admin listener needs to be started as root; secondly, maybe your
system already has an httpd installed and running at port 80
(like the apache server installed by default), in that case,
port 80 is already occupied.
Robert XU
Patrick Schlaepfer (guest) wrote:
: If I'd like to start up the www listener (on port 80),
: the whole system gets locked up and a lot of %CPU is used.
: All other listeners starts quite all right.
: Then I get:
: Your request could not be...
: and quite often this happens. So it's nearly NOT USABLE,
: the OWAS 3.0.x. What could be the cause for the strange
: behavior. Also heard, should use another www listener
: such as Netscape, but that's not the solution.
null -
Strange behavior when "trying" to burn a disk.
At least I think this is strange behavior, following the instructions in the help viewer, topic "Backing up your music to a CD or DVD." One thing for sure, it's not burning a disc and it ain't telling me why.
I select the playlist and click "Burn Disc"
Requests a blank disc. I insert one.
Message "checking media"
after about a minute, the disc ejects
Message "checking media" displays another 30 seconds
No other messages displayed.
What the ??? Shouldn't it at least display an error message??
Super-Drive information..... from System Profiler
MATSHITA DVD-R UJ-845C:
Firmware Revision: DPP9
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Using Sony DVD+R discs.
Mac Mini Mac OS X (10.4.8)Whoops, sorry, this was while burning a playlist.
I've also tried some Pleomax CD disks (Samsung), with no luck. I've tried burning directly from iTunes, and from Toast 7.
Of the types I've tried, the Sony DVD's have been the best for me. Haven't tried many types though. Maybe I can get disks one at a time until I find a brand my burner likes.
Still, isn't it strange that there is NO error message? It just quits?
Mac Mini Mac OS X (10.4.8) -
Strange Behavior with gMSA in Server 2012 R2
Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
NickVIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
+ FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick -
Strange behavior - icon thumbnail instead of image - CC@OSX10.10
Hi,
my CC (@OS X 10.10.3) showing a strange behavior using vanishing point filter.
After defining grid and try to paste the image OS X paste the icon thumbnail instead of the image,
Many thanks in advance!!
br
JoachimIt is probably related to the fact that you are setting the tables row height in the renderer this will fire a render message when the height changes. One height is applied to all rows of a table. This means that is you have images of different heights you are continually changing the tables row height and therefore continually rendereing.
My approach would be to have all the images fit into a set size ( say 64*64 ( with scaling if neccesary ) you could then have a popup show the full size image if required. -
Strange behavior in report Output
Hi,
Strange behavior in report output , please some one help me out of this problem.
I am using Oracle order capture rdf file ASOPQTEL.rdf.
My working environment:
Windows,apps instance .Now this rdf file is working fine in my work Environment.
when this same file is deployed in client environment (UNIX and different apps instance from my working environment apps instance)
for some cases it is giving output.
for some cases it's throughing error.
Thanks,
MithunPlease specify what kind of error you are getting and what is command you are firing on Unix.
-
Strange behavior of the Macbook pro display
Hi to all
I'm using my MacBook pro, and notice some strange behavior after open several windows or applications, I don't know how to explain, so here is a photo:
http://www.flickr.com/photos/86155326@N00/
I have tried: go back to 10.4.6 / create a new account / Hardware test... and Nothing.
Any suggestions?
PedroI am having the exact same problem(and no one is replying to my post either), I read in another post of someone who had a somewhat similar issue and someone commented that it was bad VRAM and warranted the logic board to be replaced. I'm hoping this is not the case, or at least hoping the problem does not get worse because I am in school and can't be without this computer for 2 weeks while it gets repaired..I'm hoping I can last til the holidays...
pictures of my problem:
http://www.rpi.edu/~neala/pics/display/Messed%20up%20desktop.png
http://www.rpi.edu/~neala/pics/display/Picture%204.png
Sometimes I can make it go away by moving windows, and sometimes that makes it worse... this computer is only 100 days old...come on apple..help us out! -
Report FP_TEST_00 - Strange behavior
Hello Gurus,
A strange behavior with report FP_TEST_00 occurs:
SA38 --> FP_TEST_00 --> select a device --> execute --> print preview then and error or popup is show:
Adobe Reader
Error initializing the font server module
Then the SAP GUI is closed, I check the ST22 and no dump is generated and in transaction SM21 only appear:
DP Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
DP Q0 I Operating system call recv failed (error no. 232 )
The #1 log entry: *
Details Page 2 Line 28 System Log: Local Analysis of sapdev 1
Time Type Nr Clt User TCode Grp N Text
11:37:20 DP Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
11092 Dispatcher K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text.......... Caller.... Reason/cal
dpxxdisp 1223 551 ADMIN 86 HUSVP-SAP-BA DpRTmPr NiBufRe
Documentation for system log message Q0 4 :
The SAP Dispatcher (part of the application server) has lost the
connection to a terminal process. For example, this happens when the
terminal program (GUI) terminates without correctly logging off the
application server. More detailed information about the error
context is not available here.
Technical details
File Offset RecFm System log type Grp N variable message data
21 254340 m Error (Function,Module,Row) Q0 4 551 ADMIN 86 HUSVP-SAP-BA DpRTmPrNiBufRedpxxdisp1223
The #2 Log show: *
Details Page 2 Line 29 System Log: Local Analysis of sapdev 1
Time Type Nr Clt User TCode Grp N Text
11:37:20 DP Q0 I Operating system call recv failed (error no. 232 )
Operating system call recv failed (error no. 232 )
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process User...... Terminal Session TCode Program Cl Problem cl Package
11092 Dispatcher K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text Caller.... Reason/cal
nixxi.cp 4435 recv232 NiIRead recv
Documentation for system log message Q0 I :
The specified operating system call was returned with an error.
For communication calls (receive, send, etc) often the cause of errors
are network problems.
It could also be a configuration problem at operating system level.
(file cannot be opened, no space in the file system etc.).
Additional specifications for error number 232
Name for errno number ECONNRESET
No documentation available for error ECONNRESET
Technical details
File Offset RecFm System log type Grp N variable message data
21 254520 m Error (Function,Module,Row) Q0 I recv232 NiIReadrecv nixxi.cp4435
Edited by: Hernando Polania Cadena on Feb 25, 2010 8:36 PMHello All,
I applied the solution in page
http://wiki.sdn.sap.com/wiki/display/PLM/Adobe%209%20-%20SAPGUI%20crash
Works OK
Thanks
Hernando -
Strange behavior when I try to match a mpeg2 video with the menu size image
hello all,
got a strange behavior when I try to match a mpeg2 video with the menu size image,
menu size is 1920 x 1080 (photoshop file)
mpeg2 video 1920 x 1080 (1second 19 frames)
the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
why encore treats the video size and picture differently?
it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
thankl you allHi all
I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
Using Encore,PS,AE CS4
DVD format SD PAL DV widescreen
I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
In the properties panel the menu Aspect Ratio 16:9
The AE transistions PAR is SD PALwidescreen 1.4587.
I did try the Blu Ray suggestion above but the same distortion was apparent.
Any suggestions short of squashing the video to match the menu would be welcomed.
Thanks -
Strange behavior of textareas in BPEL Worklist (10.1.2)
I have a very strange behavior with linebreaks in all my <textarea>s in the BPEL-Worklist-jsps: (they work fine as <INPUT>s
Example:
Default-text:
line1
I update the textarea to:
line1
line2
-> hit update
line1
*** (second line is completly missing)
-> hitting update again (no change in text)
line2line1
*** (all on one line with the new line in front)
As Value I use:
<%=PayloadFormGenerator.selectNodeValue(payload, "/ns0:task/ns0:payload/ns1:abstract", form.getNamespaceMap(),"string", context.getLocale())%>
and as mentioned: It works fine for <INPUT>.
What do I do wrong? Is this a bug?
Daniel
Message was edited by:
user552073Had the same problem, could not get it to be consistent. I would say this is a bug, but decided to edit payloads via the database in the end...
Maybe you are looking for
-
MOVED: Re: MSI Forum HQ USB flashing tool!!!
This topic has been moved to BIOS. https://forum-en.msi.com/index.php?topic=167130.0
-
I have an MI Server Installed. It worked well for nearly a month. The server version info in brief is WebAS 6.40 with SP20. MI Client's version is SP20.Now I am getting a strange problem. For a new installation of the Client, when I create a new Use
-
Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. . How can i delete them off my phones memory for good? iPhone 4S
-
Remote Desktop Monitoring System
I am having some porblem regarding my project on Remote Desktop Monitoring System. The project is supposed to have the following features: 1.Monitor and Control the computer in a network 2.Send Instant Message 3.File Transfer We are having porblem on
-
MessageChoice and primaryClientAction
Hi!! I've 2 messageChoices on an UIX page. The first one have a primaryClientAction. After the event is called and the page is rendered, the second messageChoice just dissapear, the only thing left behind is the label. (both messageChoices are based