Strange behavior of Planning manager
Hi All,
I am working on forecast interface, facing a strange behavior of Planning manager.
Our application planning manager is in active status, we set MRP:Planning Manager Batch Size profile value as 2000 and MRP:Planning Manager Max Workers value as 10 in our application(11.5.10.2).
we have loaded 2Lac's of records in MRP_FORECAST_INTERFACE table with process_status=2. Almost running for 12hours, even one record status(process_status) also not changed. the code which we are using to load in interface table is using in production since 3 years.. Can any one help me to figerout the issue ..
Thanks
please search this forum. it has been answered many times
over.
i dont have the thread that answers it right way - but if you
do a search im sure youll find it (i did jsut recently)
Similar Messages
-
Strange behavior of explain plan
Hello i don't know if this is the correct category for posting my issue.
I ma facing a strange behavior of the explain plan. What i mean!
I have a query which runs very fast and it is well optimized. the explain plan shows very good results in cost and execution time.
when i am running the query for a second or a third time is appearing a different explain plan with not such a good cost and execution time.
Could you please guide me what it might be wrong???
thanks a lotHI i found the correct category
thanks -
Location Manager Strange Behavior
Hi,
debbung my application i have discovered that location manager have sometimes a strange behavior. Sometimes when i start to get location only the first "Bad" point with v. accur. = -1 is returned then no other point i returned. If then i open Apple Map i see that also map doesn't get point. So i must shutdown and restart Location service and all work perfectly. I have also strange issue when i change distanceFilter in the already created location manager Instance. it's doesn't work no point are peeked. If i restart the app sometimes work.
Finally i have discovered on the iphone syslog that it try to connect to an apple site "http://iphone-wu.apple.com" to download a file" lto2.dat" someone know what is this file?
Thanks youHello, I see the same in my Iphone.
I search in google and found this:
"Global Locate predicts the satellite orbits for 2, 4, 7, or 10
days in advance, and you download that. AKA "Long Term Orbit" or LTO."
It's a module used in opensource gps -
Strange Behavior with gMSA in Server 2012 R2
Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
NickVIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
+ FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick -
Strange behavior of HtmlPanelGrid.getChildren().clear();
I have some problem, described in previous messages.
Investigating it, I found some strange behavior, which I cannot understand.
I builded a small application to isolate this strangeness.
There are two pages, first and second. There are hyperlinks from first page to second. Secon page serves as an indicator, that navigation was successfull. It is not so all the time.
There is a bean, which constructs a hyperlink at runtime and which contains my problem, as I think.
The config file is (header and footer skipped):
<navigation-rule>
<from-view-id>/welcomeJSF.jsp</from-view-id>
<navigation-case>
<from-outcome>select</from-outcome>
<to-view-id>/secondPage.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<managed-bean>
<managed-bean-name>bean</managed-bean-name>
<managed-bean-class>Buggy.Bean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
One can see, that navigation is always controlled with the one constant string literal -- select. The bean is called just "bean" and it exists during a session.
First page is (header and footer skipped):
<f:view>
<h:form>
<h:commandLink id="link1" action="select" value="link1 (hardcoded)"/>
<h:panelGrid id="panel" binding="#{bean.panel}" columns="20" border="1" cellspacing="0">
<h:commandLink id="link2" action="select" value="link2 (hardcoded)"/>
</h:panelGrid>
</h:form>
</f:view>
One can see, that there are two hardcoded hyperlinks, one is inside the panelGrid, second is outside. Also it is seen, that the panel is binded with bean property as a whole.
The second page is just displaying a text to be sure the navigation occured.
Now the bean (header and footer skipped):
private HtmlPanelGrid panel;
public HtmlPanelGrid getPanel() {
return panel;
public void setPanel(HtmlPanelGrid panel) {
this.panel = panel;
Application application = FacesContext.getCurrentInstance().getApplication();
MethodExpression expr = application.getExpressionFactory().createMethodExpression(FacesContext.getCurrentInstance().getELContext(), "select", String.class, new Class[0]);
HtmlCommandLink link = (HtmlCommandLink) application.createComponent(HtmlCommandLink.COMPONENT_TYPE);
link.setId("link3");
link.setValue("link3 (softcoded)");
link.setActionExpression(expr);
panel.getChildren().clear();
panel.getChildren().add(link);
One can see, that a third (softcoded) hyperlink is added to the panel dynamically, with preliminary clearing panel content.
* STRANGENESSES *
1) despite the fact, that the panel is cleared prior to adding softcoded hyperlink, I CAN see it on the page (all 3 hyperlinks are seen)
2) in the debugger I can see, that while executing code, the children list is empty; this can mean, that the order of execution of the Jave code and JSP code is reversed; despite this fact, I see the hardcoded link BEFORE the softcoded
3) the link2 (hardcoded) is not work, i.e. it is not leads the second page to be displayed
4) if I comment the line panel.getChildren().clear(); then all 3 hyperlinks start to workBut when I put links creation code in bean's constructor, it was lost.
It seems to me, that the system creates panel independently and only after that calls setter of my bean. Ergo, the data from the panel field, initialized in constructor is overwrited.
Where I should place programmatic filling of panel element? -
Strange behavior after suspend.
Hi,
For some time I have a strange behavior of my system after I awake my computer(after suspend). This problem don't disappear after update.
Ok, so if I suspend my computer, and awake him I can't run any program. Even if i was open some application, this application crashes. I have to restart my machine.
Somebody had similar problem or know how help?
I'm using Arch Linux x64, kernel 3.8, openbox. Suspend by "systemctl suspend".OK, maybe good idea is paste here my output journal:
# journalctl --since=today | tac | sed -n '/-- Reboot --/{n;:r;/-- Reboot --/q;p;n;b r}' | tac
-- Logs begin at Mon 2012-09-10 20:20:07 CEST, end at Thu 2013-03-28 10:17:18 CET. --
Mar 28 10:10:36 localhost kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Mar 28 10:10:36 localhost systemd[1]: Time has been changed
Mar 28 10:10:36 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
Mar 28 10:10:36 localhost kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Mar 28 10:10:36 localhost dhcpcd[1435]: eth1: carrier lost
Mar 28 10:10:36 localhost kernel: PM: Entering mem sleep
Mar 28 10:10:36 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Stopping disk
Mar 28 10:10:36 localhost kernel: cfg80211: Calling CRDA for country: PL
Mar 28 10:10:36 localhost kernel: <6>[fglrx] IRQ 46 Disabled
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Preparing suspend fglrx in kernel.
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Suspending fglrx in kernel completed.
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Power down the ASIC .
Mar 28 10:10:36 localhost kernel: PM: suspend of devices complete after 1126.292 msecs
Mar 28 10:10:36 localhost kernel: PM: late suspend of devices complete after 0.263 msecs
Mar 28 10:10:36 localhost kernel: r8169 0000:09:00.0: System wakeup enabled by ACPI
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
Mar 28 10:10:36 localhost kernel: PM: noirq suspend of devices complete after 52.988 msecs
Mar 28 10:10:36 localhost kernel: ACPI: Preparing to enter system sleep state S3
Mar 28 10:10:36 localhost kernel: PM: Saving platform NVS memory
Mar 28 10:10:36 localhost kernel: Disabling non-boot CPUs ...
Mar 28 10:10:36 localhost kernel: smpboot: CPU 1 is now offline
Mar 28 10:10:36 localhost kernel: smpboot: CPU 2 is now offline
Mar 28 10:10:36 localhost kernel: smpboot: CPU 3 is now offline
Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
Mar 28 10:10:36 localhost kernel: ACPI: Low-level resume complete
Mar 28 10:10:36 localhost kernel: PM: Restoring platform NVS memory
Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
Mar 28 10:10:36 localhost kernel: CPU0: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: Enabling non-boot CPUs ...
Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 1 APIC 0x4
Mar 28 10:10:36 localhost kernel: CPU1: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: CPU1 is up
Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
Mar 28 10:10:36 localhost kernel: CPU2: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: CPU2 is up
Mar 28 10:10:36 localhost kernel: smpboot: Booting Node 0 Processor 3 APIC 0x5
Mar 28 10:10:36 localhost kernel: CPU3: Thermal monitoring handled by SMI
Mar 28 10:10:36 localhost kernel: CPU3 is up
Mar 28 10:10:36 localhost kernel: ACPI: Waking up from system sleep state S3
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: MMC controller base frequency changed to 50Mhz.
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: MMC cards are now supported by standard SDHCI controller
Mar 28 10:10:36 localhost kernel: PM: noirq resume of devices complete after 133.780 msecs
Mar 28 10:10:36 localhost kernel: PM: early resume of devices complete after 0.127 msecs
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1a.0: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: mei 0000:00:16.0: irq 43 for MSI/MSI-X
Mar 28 10:10:36 localhost kernel: snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Mar 28 10:10:36 localhost kernel: pci 0000:00:1e.0: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: ehci-pci 0000:00:1d.0: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: ahci 0000:00:1f.2: setting latency timer to 64
Mar 28 10:10:36 localhost kernel: snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X
Mar 28 10:10:36 localhost kernel: r8169 0000:09:00.0: System wakeup disabled by ACPI
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Power up the ASIC
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Preparing resume fglrx in kernel.
Mar 28 10:10:36 localhost kernel: Extended CMOS year: 2000
Mar 28 10:10:36 localhost kernel: <6>[fglrx] Resuming fglrx in kernel completed.
Mar 28 10:10:36 localhost kernel: <6>[fglrx] IRQ 46 Enabled
Mar 28 10:10:36 localhost kernel: ata5: SATA link down (SStatus 0 SControl 300)
Mar 28 10:10:36 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 28 10:10:36 localhost kernel: ata2.00: configured for UDMA/100
Mar 28 10:10:36 localhost kernel: usb 2-1.3: reset low-speed USB device number 3 using ehci-pci
Mar 28 10:10:36 localhost kernel: sdhci-pci 0000:07:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
Mar 28 10:10:36 localhost kernel: firewire_core 0000:07:00.3: rediscovered device fw0
Mar 28 10:10:36 localhost kernel: usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
Mar 28 10:10:36 localhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 28 10:10:36 localhost kernel: ata1.00: configured for UDMA/133
Mar 28 10:10:36 localhost kernel: sd 0:0:0:0: [sda] Starting disk
Mar 28 10:10:36 localhost kernel: PM: resume of devices complete after 2478.795 msecs
Mar 28 10:10:36 localhost kernel: PM: Finishing wakeup.
Mar 28 10:10:36 localhost kernel: Restarting tasks ... done.
Mar 28 10:10:36 localhost kernel: video LNXVIDEO:00: Restoring backlight state
Mar 28 10:10:36 localhost slim[806]: Conky: can't open /sys/class/power_supply/BAT0/uevent: No such file or directory
Mar 28 10:10:36 localhost slim[806]: Conky: can't open /proc/acpi/battery/BAT0/state: No such file or directory
Mar 28 10:10:36 localhost systemd-sleep[4208]: System resumed.
Mar 28 10:10:36 localhost dbus-daemon[800]: dbus[800]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Mar 28 10:10:36 localhost dbus[800]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Mar 28 10:10:36 localhost su[4307]: (to root) root on none
Mar 28 10:10:36 localhost su[4307]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:36 localhost systemd[1]: Starting Daemon for power management...
Mar 28 10:10:36 localhost su[4307]: pam_unix(su:session): session closed for user root
Mar 28 10:10:36 localhost su[4328]: (to root) root on none
Mar 28 10:10:36 localhost su[4328]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:36 localhost su[4328]: pam_unix(su:session): session closed for user root
Mar 28 10:10:36 localhost systemd[1]: Started Suspend.
Mar 28 10:10:36 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
Mar 28 10:10:36 localhost systemd[1]: Stopping Sleep.
Mar 28 10:10:36 localhost systemd[1]: Stopped target Sleep.
Mar 28 10:10:36 localhost systemd[1]: Starting Suspend.
Mar 28 10:10:36 localhost systemd[1]: Reached target Suspend.
Mar 28 10:10:36 localhost systemd-logind[796]: Operation finished.
Mar 28 10:10:36 localhost laptop-mode[4441]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4446]: enabled, active [unchanged]
Mar 28 10:10:36 localhost logger[4463]: ACPI action undefined: ACPI0003:00
Mar 28 10:10:36 localhost laptop-mode[4501]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4509]: enabled, active [unchanged]
Mar 28 10:10:36 localhost laptop-mode[4534]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4539]: enabled, active [unchanged]
Mar 28 10:10:36 localhost laptop-mode[4554]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4557]: enabled, active [unchanged]
Mar 28 10:10:36 localhost laptop-mode[4562]: Laptop mode
Mar 28 10:10:36 localhost laptop-mode[4563]: enabled, active [unchanged]
Mar 28 10:10:36 localhost dbus-daemon[800]: dbus[800]: [system] Successfully activated service 'org.freedesktop.UPower'
Mar 28 10:10:36 localhost dbus[800]: [system] Successfully activated service 'org.freedesktop.UPower'
Mar 28 10:10:36 localhost systemd[1]: Started Daemon for power management.
Mar 28 10:10:37 localhost ntpd[1442]: Deleting interface #3 eth1, 192.168.1.6#123, interface stats: received=135, sent=135, dropped=1, active_time=4197 secs
Mar 28 10:10:37 localhost ntpd[1442]: 149.156.70.60 interface 192.168.1.6 -> (none)
Mar 28 10:10:37 localhost ntpd[1442]: 149.156.24.40 interface 192.168.1.6 -> (none)
Mar 28 10:10:37 localhost ntpd[1442]: 46.250.172.2 interface 192.168.1.6 -> (none)
Mar 28 10:10:37 localhost ntpd[1442]: peers refreshed
Mar 28 10:10:38 localhost su[4624]: (to root) root on none
Mar 28 10:10:38 localhost su[4624]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:38 localhost laptop-mode[4653]: Laptop mode
Mar 28 10:10:38 localhost laptop-mode[4654]: enabled, active [unchanged]
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: carrier acquired
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: rebinding lease of 192.168.1.6
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: acknowledged 192.168.1.6 from 192.168.1.1 `TP-LINK'
Mar 28 10:10:38 localhost dhcpcd[1435]: eth1: checking for 192.168.1.6
Mar 28 10:10:38 localhost su[4624]: pam_unix(su:session): session closed for user root
Mar 28 10:10:38 localhost su[4660]: (to root) root on none
Mar 28 10:10:38 localhost su[4660]: pam_unix(su:session): session opened for user root by (uid=0)
Mar 28 10:10:38 localhost su[4660]: pam_unix(su:session): session closed for user root
Mar 28 10:10:38 localhost kernel: EXT4-fs (sda6): re-mounted. Opts: commit=0
Mar 28 10:10:38 localhost kernel: EXT4-fs (sda7): re-mounted. Opts: commit=0
Mar 28 10:10:38 localhost laptop-mode[4694]: Laptop mode
Mar 28 10:10:38 localhost laptop-mode[4695]: enabled, active [unchanged]
Mar 28 10:10:38 localhost logger[4698]: ACPI action undefined: ACPI0003:00
Mar 28 10:10:38 localhost slim[806]: tint2 : invalid option "task_margin",
Mar 28 10:10:38 localhost slim[806]: upgrade tint2 or correct your config file
Mar 28 10:10:38 localhost slim[806]: tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
Mar 28 10:10:38 localhost slim[806]: X Error of failed request: BadWindow (invalid Window parameter)
Mar 28 10:10:38 localhost slim[806]: Major opcode of failed request: 21 (X_ListProperties)
Mar 28 10:10:38 localhost slim[806]: Resource id in failed request: 0x18000b0
Mar 28 10:10:38 localhost slim[806]: Serial number of failed request: 12
Mar 28 10:10:38 localhost slim[806]: Current serial number in output stream: 12
Mar 28 10:10:40 localhost slim[806]: you have no weather alerts
Mar 28 10:10:40 localhost slim[806]: processing complete
Mar 28 10:10:40 localhost slim[806]: gathering data with curl
Mar 28 10:10:40 localhost slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
Mar 28 10:10:40 localhost slim[806]: Dload Upload Total Spent Left Speed
Mar 28 10:10:40 localhost slim[806]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: (nil); Unknown error
Mar 28 10:10:40 localhost slim[806]: not checking for alerts
Mar 28 10:10:40 localhost slim[806]: curl attempt timed out, trying again
Mar 28 10:10:40 localhost slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
Mar 28 10:10:40 localhost slim[806]: Dload Upload Total Spent Left Speed
Mar 28 10:10:40 localhost slim[806]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: (nil); Unknown error
Mar 28 10:10:42 localhost dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:43 localhost dhcpcd[1435]: eth1: leased 192.168.1.6 for 259200 seconds
Mar 28 10:10:45 dhcppc4 ntpd[1442]: Listen normally on 6 eth1 192.168.1.6 UDP 123
Mar 28 10:10:45 dhcppc4 ntpd[1442]: peers refreshed
Mar 28 10:10:45 dhcppc4 ntpd[1442]: new interface(s) found: waking up resolver
Mar 28 10:10:45 dhcppc4 slim[806]: Traceback (most recent call last):
Mar 28 10:10:45 dhcppc4 slim[806]: File "/home/rlk120/.scripts/gmail.py", line 9, in <module>
Mar 28 10:10:45 dhcppc4 slim[806]: msg=temp.read()
Mar 28 10:10:45 dhcppc4 slim[806]: File "/usr/lib/python3.3/encodings/ascii.py", line 26, in decode
Mar 28 10:10:45 dhcppc4 slim[806]: return codecs.ascii_decode(input, self.errors)[0]
Mar 28 10:10:45 dhcppc4 slim[806]: UnicodeDecodeError: 'ascii' codec can't decode byte 0xc5 in position 375: ordinal not in range(128)
Mar 28 10:10:45 dhcppc4 slim[806]: not checking for alerts
Mar 28 10:10:45 dhcppc4 slim[806]: curl attempt timed out, trying again
Mar 28 10:10:45 dhcppc4 slim[806]: % Total % Received % Xferd Average Speed Time Time Time Current
Mar 28 10:10:45 dhcppc4 slim[806]: Dload Upload Total Spent Left Speed
Mar 28 10:10:46 dhcppc4 slim[806]: [234B blob data]
Mar 28 10:10:46 dhcppc4 dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:50 dhcppc4 dhcpcd[1435]: eth1: sending IPv6 Router Solicitation
Mar 28 10:10:50 dhcppc4 dhcpcd[1435]: eth1: no IPv6 Routers available
Mar 28 10:11:03 dhcppc4 slim[806]: No protocol specified
Mar 28 10:11:03 dhcppc4 slim[806]: (chromium:4750): Gtk-WARNING **: cannot open display: :0.0
Mar 28 10:11:31 dhcppc4 systemd-logind[796]: System is rebooting.
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Daemon for power management...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Authorization Manager...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping ACPI event daemon...
Mar 28 10:11:32 dhcppc4 ntpd[1442]: ntpd exiting on signal 15
Mar 28 10:11:32 dhcppc4 acpid[793]: exiting
Mar 28 10:11:32 dhcppc4 dhcpcd[4810]: sending signal 1 to pid 1435
Mar 28 10:11:32 dhcppc4 dhcpcd[4810]: waiting for pid 1435 to exit
Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: received SIGHUP, releasing
Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: eth1: releasing lease of 192.168.1.6
Mar 28 10:11:32 dhcppc4 dhcpcd[1435]: eth1: removing interface
Mar 28 10:11:33 dhcppc4 slim[806]: Conky: received SIGHUP or SIGUSR1. reloading the config file.
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 200200 requests (200197 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: Conky: received SIGHUP or SIGUSR1. reloading the config file.
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 4 (Interrupted system call) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 226 requests (226 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: real transparency off.... depth: 24
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Found crtc's: 4
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Linking output LVDS with crtc 0
Mar 28 10:11:33 dhcppc4 slim[806]: real transparency off.... depth: 24
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Found crtc's: 4
Mar 28 10:11:33 dhcppc4 slim[806]: xRandr: Linking output LVDS with crtc 0
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 534585 requests (534585 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
Mar 28 10:11:33 dhcppc4 slim[806]: after 163909 requests (163909 known processed) with 0 events remaining.
Mar 28 10:11:33 dhcppc4 slim[806]: you have no weather alerts
Mar 28 10:11:33 dhcppc4 slim[806]: processing complete
Mar 28 10:11:33 dhcppc4 kernel: cfg80211: Calling CRDA to update world regulatory domain
Mar 28 10:11:33 dhcppc4 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Mar 28 10:11:33 dhcppc4 netcfg-daemon[4777]: :: siec_domowa down [done]
Mar 28 10:11:33 dhcppc4 slim[806]: Server terminated successfully (0). Closing log file.
Mar 28 10:11:33 dhcppc4 laptop-mode[4865]: Laptop mode
Mar 28 10:11:33 dhcppc4 laptop-mode[4866]: enabled, active [unchanged]
Mar 28 10:11:34 dhcppc4 systemd[1]: slim.service: main process exited, code=exited, status=1/FAILURE
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped SLiM Simple Login Manager.
Mar 28 10:11:34 dhcppc4 systemd[1]: Unit slim.service entered failed state
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Permit User Sessions...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Permit User Sessions.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Load Kernel Modules...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Load Kernel Modules.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Apply Kernel Variables...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Apply Kernel Variables.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Setup Virtual Console...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Setup Virtual Console.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Set Up Additional Binary Formats...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Set Up Additional Binary Formats.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /home...
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /tmp...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /tmp.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /home.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
Mar 28 10:11:35 dhcppc4 systemd[1]: Set hardware watchdog to 10min.
Mar 28 10:11:35 dhcppc4 kernel: watchdog watchdog0: watchdog did not stop!
Mar 28 10:11:35 dhcppc4 systemd-journal[131]: Journal stopped
Somebody probably find interesting things in this code.
And here is some fail slim:
# journalctl /usr/lib/systemd/systemd --since=today
-- Logs begin at Mon 2012-09-10 20:20:07 CEST, end at Thu 2013-03-28 10:37:18 CET. --
Mar 28 10:10:36 localhost systemd[1]: Time has been changed
Mar 28 10:10:36 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
Mar 28 10:10:36 localhost systemd[1]: Starting Daemon for power management...
Mar 28 10:10:36 localhost systemd[1]: Started Suspend.
Mar 28 10:10:36 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
Mar 28 10:10:36 localhost systemd[1]: Stopping Sleep.
Mar 28 10:10:36 localhost systemd[1]: Stopped target Sleep.
Mar 28 10:10:36 localhost systemd[1]: Starting Suspend.
Mar 28 10:10:36 localhost systemd[1]: Reached target Suspend.
Mar 28 10:10:36 localhost systemd[1]: Started Daemon for power management.
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Deactivating swap /dev/sda8...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Sound Card.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Daemon for power management...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Authorization Manager...
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Graphical Interface.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopped target Multi-User.
Mar 28 10:11:32 dhcppc4 systemd[1]: Stopping ACPI event daemon...
Mar 28 10:11:34 dhcppc4 systemd[1]: slim.service: main process exited, code=exited, status=1/FAILURE
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped SLiM Simple Login Manager.
Mar 28 10:11:34 dhcppc4 systemd[1]: Unit slim.service entered failed state
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Permit User Sessions...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Permit User Sessions.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Basic System.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Forward Password Requests to Wall Directory Watch.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Daily Cleanup of Temporary Directories.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target Sockets.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed LVM2 metadata daemon socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Device-mapper event daemon FIFOs.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed Syslog Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed ACPID Listen Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Closed D-Bus System Message Bus Socket.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped target System Initialization.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Load Kernel Modules...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Load Kernel Modules.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Apply Kernel Variables...
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopped Apply Kernel Variables.
Mar 28 10:11:34 dhcppc4 systemd[1]: Stopping Setup Virtual Console...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Setup Virtual Console.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Set Up Additional Binary Formats...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Set Up Additional Binary Formats.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Encrypted Volumes.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Swap.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /home...
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounting /tmp...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Remote File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /tmp.
Mar 28 10:11:35 dhcppc4 systemd[1]: Unmounted /home.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Unmount All Filesystems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped target Local File Systems (Pre).
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopping Remount Root and Kernel File Systems...
Mar 28 10:11:35 dhcppc4 systemd[1]: Stopped Remount Root and Kernel File Systems.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Save Random Seed...
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Update UTMP about System Shutdown...
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Save Random Seed.
Mar 28 10:11:35 dhcppc4 systemd[1]: Started Update UTMP about System Shutdown.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Reached target Final Step.
Mar 28 10:11:35 dhcppc4 systemd[1]: Starting Reboot...
Mar 28 10:11:35 dhcppc4 systemd[1]: Shutting down.
Mar 28 10:11:35 dhcppc4 systemd[1]: Hardware watchdog 'iTCO_wdt', version 0
Mar 28 10:11:35 dhcppc4 systemd[1]: Set hardware watchdog to 10min.
Last edited by xorgx3 (2013-03-28 10:52:08) -
Strange behavior: action method not called when button submitted
Hello,
My JSF app is diplaying a strange behavior: when the submit button is pressed the action method of my managed bean is not called.
Here is my managed bean:
package arcoiris;
import java.util.ArrayList;
import java.util.List;
import javax.faces.model.SelectItem;
public class SearchManagedBean {
//Collected from search form
private String keyword;
private String country;
private int[] postcode;
private boolean commentExists;
private int rating;
private boolean websiteExists;
//Used to populate form
private List<SelectItem> availableCountries;
private List<SelectItem> availablePostcodes;
private List<SelectItem> availableRatings;
//Retrieved from ejb tier
private List<EstablishmentLocal> retrievedEstablishments;
//Service locator
private arcoiris.ServiceLocator serviceLocator;
//Constructor
public SearchManagedBean() {
System.out.println("within constructor SearchManagedBean");
System.out.println("rating "+this.rating);
//Getters and setters
public String getKeyword() {
return keyword;
public void setKeyword(String keyword) {
this.keyword = keyword;
public String getCountry() {
return country;
public void setCountry(String country) {
this.country = country;
public boolean isCommentExists() {
return commentExists;
public void setCommentExists(boolean commentExists) {
this.commentExists = commentExists;
public int getRating() {
return rating;
public void setRating(int rating) {
this.rating = rating;
public boolean isWebsiteExists() {
return websiteExists;
public void setWebsiteExists(boolean websiteExists) {
this.websiteExists = websiteExists;
public List<SelectItem> getAvailableCountries() {
List<SelectItem> countries = new ArrayList<SelectItem>();
SelectItem si_1 = new SelectItem();
SelectItem si_2 = new SelectItem();
SelectItem si_3 = new SelectItem();
si_1.setValue("2");
si_1.setLabel("ecuador");
si_2.setValue("1");
si_2.setLabel("colombia");
si_3.setValue("3");
si_3.setLabel("peru");
countries.add(si_1);
countries.add(si_2);
countries.add(si_3);
return countries;
public void setAvailableCountries(List<SelectItem> countries) {
this.availableCountries = availableCountries;
public List<SelectItem> getAvailablePostcodes() {
List<SelectItem> postcodes = new ArrayList<SelectItem>();
SelectItem si_1 = new SelectItem();
SelectItem si_2 = new SelectItem();
SelectItem si_3 = new SelectItem();
si_1.setValue(75001);
si_1.setLabel("75001");
si_2.setValue(75002);
si_2.setLabel("75002");
si_3.setValue(75003);
si_3.setLabel("75003");
postcodes.add(si_1);
postcodes.add(si_2);
postcodes.add(si_3);
return postcodes;
public void setAvailablePostcodes(List<SelectItem> availablePostcodes) {
this.availablePostcodes = availablePostcodes;
public List<SelectItem> getAvailableRatings() {
List<SelectItem> ratings = new ArrayList<SelectItem>();
SelectItem si_1 = new SelectItem();
SelectItem si_2 = new SelectItem();
SelectItem si_3 = new SelectItem();
si_1.setValue(1);
si_1.setLabel("1");
si_2.setValue(2);
si_2.setLabel("2");
si_3.setValue(3);
si_3.setLabel("3");
ratings.add(si_1);
ratings.add(si_2);
ratings.add(si_3);
return ratings;
public void setAvailableRatings(List<SelectItem> availableRatings) {
this.availableRatings = availableRatings;
public int[] getPostcode() {
return postcode;
public void setPostcode(int[] postcode) {
this.postcode = postcode;
public List<EstablishmentLocal> getRetrievedEstablishments() {
return retrievedEstablishments;
public void setRetrievedEstablishments(List<EstablishmentLocal> retrievedEstablishments) {
this.retrievedEstablishments = retrievedEstablishments;
//Business methods
public String performSearch(){
System.out.println("performSearchManagedBean begin");
SearchRequestDTO searchRequestDto = new SearchRequestDTO(this.keyword,this.country,this.postcode,this.commentExists,this.rating, this.websiteExists);
SearchSessionLocal searchSession = lookupSearchSessionBean();
List<EstablishmentLocal> retrievedEstablishments = searchSession.performSearch(searchRequestDto);
this.setRetrievedEstablishments(retrievedEstablishments);
System.out.println("performSearchManagedBean end");
return "success";
private arcoiris.ServiceLocator getServiceLocator() {
if (serviceLocator == null) {
serviceLocator = new arcoiris.ServiceLocator();
return serviceLocator;
private arcoiris.SearchSessionLocal lookupSearchSessionBean() {
try {
return ((arcoiris.SearchSessionLocalHome) getServiceLocator().getLocalHome("java:comp/env/ejb/SearchSessionBean")).create();
} catch(javax.naming.NamingException ne) {
java.util.logging.Logger.getLogger(getClass().getName()).log(java.util.logging.Level.SEVERE,"exception caught" ,ne);
throw new RuntimeException(ne);
} catch(javax.ejb.CreateException ce) {
java.util.logging.Logger.getLogger(getClass().getName()).log(java.util.logging.Level.SEVERE,"exception caught" ,ce);
throw new RuntimeException(ce);
}Here is my jsp page:
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<META HTTP-EQUIV="pragma" CONTENT="no-cache">
<title>JSP Page</title>
</head>
<body>
<f:view>
<h:panelGroup id="body">
<h:form id="searchForm">
<h:panelGrid columns="2">
<h:outputText id="keywordLabel" value="enter keyword"/>
<h:inputText id="keywordField" value="#{SearchManagedBean.keyword}"/>
<h:outputText id="countryLabel" value="choose country"/>
<h:selectOneListbox id="countryField" value="#{SearchManagedBean.country}">
<f:selectItems id="availableCountries" value="#{SearchManagedBean.availableCountries}"/>
</h:selectOneListbox>
<h:outputText id="postcodeLabel" value="choose postcode(s)"/>
<h:selectManyListbox id="postcodeField" value="#{SearchManagedBean.postcode}">
<f:selectItems id="availablePostcodes" value="#{SearchManagedBean.availablePostcodes}"/>
</h:selectManyListbox>
<h:outputText id="commentExistsLabel" value="with comment"/>
<h:selectBooleanCheckbox id="commentExistsField" value="#{SearchManagedBean.commentExists}" />
<h:outputText id="ratingLabel" value="rating"/>
<h:selectOneListbox id="ratingField" value="#{SearchManagedBean.rating}">
<f:selectItems id="availableRatings" value="#{SearchManagedBean.availableRatings}"/>
</h:selectOneListbox>
<h:outputText id="websiteExistsLabel" value="with website"/>
<h:selectBooleanCheckbox id="websiteExistsField" value="#{SearchManagedBean.websiteExists}" />
<h:commandButton value="search" action="#{SearchManagedBean.performSearch}"/>
</h:panelGrid>
</h:form>
</h:panelGroup>
</f:view>
</body>
</html>
here is my faces config file:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config>
<managed-bean>
<managed-bean-name>SearchManagedBean</managed-bean-name>
<managed-bean-class>arcoiris.SearchManagedBean</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
<navigation-rule>
<description></description>
<from-view-id>/welcomeJSF.jsp</from-view-id>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>index.jsp</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>The problem occurs when the field ratingField is left blank (which amounts to it being set at 0 since it is an int).
Can anyone help please?
Thanks in advance,
Julien.Hello,
Thanks for the suggestion. I added the tag and it now says:
java.lang.IllegalArgumentException
I got that from the log:
2006-08-17 15:29:16,859 DEBUG [com.sun.faces.el.ValueBindingImpl] setValue Evaluation threw exception:
java.lang.IllegalArgumentException
at sun.reflect.GeneratedMethodAccessor118.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.faces.el.PropertyResolverImpl.setValue(PropertyResolverImpl.java:178)
at com.sun.faces.el.impl.ArraySuffix.setValue(ArraySuffix.java:192)
at com.sun.faces.el.impl.ComplexValue.setValue(ComplexValue.java:171)
at com.sun.faces.el.ValueBindingImpl.setValue(ValueBindingImpl.java:234)
at javax.faces.component.UIInput.updateModel(UIInput.java:544)
at javax.faces.component.UIInput.processUpdates(UIInput.java:442)
at javax.faces.component.UIComponentBase.processUpdates(UIComponentBase.java:935)
at javax.faces.component.UIForm.processUpdates(UIForm.java:196)
at javax.faces.component.UIComponentBase.processUpdates(UIComponentBase.java:935)
at javax.faces.component.UIComponentBase.processUpdates(UIComponentBase.java:935)
at javax.faces.component.UIViewRoot.processUpdates(UIViewRoot.java:363)
at com.sun.faces.lifecycle.UpdateModelValuesPhase.execute(UpdateModelValuesPhase.java:81)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:159)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Thread.java:595)
2006-08-17 15:29:16,875 DEBUG [com.sun.faces.context.FacesContextImpl] Adding Message[sourceId=searchForm:ratingField,summary=java.lang.IllegalArgumentException)Do you see where the problem comes from??
Julien. -
Strange behavior in URxvt - charactes remain on screen (Incl. Scrot)
I'm using Arch with Openbox.
Compton as composite manager, ẅith the open source Xf86-video-ati driver,
URxvt as terminal emulator (with the perl extension collection, more specifically tabbedex,default,keyboard-select,url-select,clipboard,matcher)
and zsh with Oh-My-Zsh as shell.
Recently switched to Arch from Ubuntu, and I'm loving it. But as the topic says, I'm getting some strange behaviors while using URxvt. If I type a command into the terminal, using tab-completetion as i usually do, and then delete some character or press tab again, in about 50% of the cases some characters from the previous command remain on the command line. Also, if I type in for example 'sudo tail -f /var/log', and delete the entire line, the 'S' letter will persistantly remain after my prompt, making the next command 'ssudo'. Other times, the '/' might remain stuck from the '/var/log' part, as shown in the screenshot.
Tried my best to reproduce the problem for a screenshot, so see the image below, the two upmost terminals for an example of what it usually looks like.
Could anybody help me out finding out the cause of this problem? Is it related to zsh, urxvt or the graphics driver?jasonwryan wrote:Does it happen without Oh-my-zsh? It is likely your prompt (with incorrect or missing escapes) or you are exporting your term.
How would I check the prompt for missing escapes? Haven't tried not using Oh-My-Zsh, would rather fix it if that's the problem.
My current prompt/Oh-My-Zsh-theme:
PROMPT='[%{$fg_bold[white]%}%n%{$reset_color%}@%{$fg_bold[red]%}%m%{$reset_color%} %{$fg[cyan]%}%c%{$reset_color%} $(git_prompt_info)%{$reset_color%}]$ '
ZSH_THEME_GIT_PROMPT_PREFIX="(%{$fg_bold[green]%}"
ZSH_THEME_GIT_PROMPT_SUFFIX=")"
ZSH_THEME_GIT_PROMPT_DIRTY="%{$fg[green]%} %{$fg[yellow]%}✗%{$reset_color%}"
ZSH_THEME_GIT_PROMPT_CLEAN="%{$reset_color%}"
Thank you for your time
Last edited by heroinsunrise (2014-10-13 08:28:14) -
My E6-00 is running Belle. The key lock switch displays very strange behavior. When I slide it to lock the phone, there will be two or three vibrations and the phone will momentarily lock and then unlock again. I have to slide it three or four times to actually get it to lock and stay locked. Behavior when unlocking is identical - sliding the switch will make the phone vibrate two or three times, and the phone will unlock for a split second before re-locking itself. I have to slide the switch three or four times to actually unlock it.
The flashlight works fine. It seems like the switch engages once when it is pushed, and then somehow engages again at the top of its movement.
This is incredibly annoying. Is it a known problem? A software defect? Hardware? Or something else?I dont have that problem.
Have you tried to do a soft reset?
meny-settings-phone-phone management-fabric settings-restore
Otherwise a hard reset (wipe the c and d comparment and sdhc card, After that, a reinstallment of Belle through Nokia Suite.
Dont reinstall backups of apps and a lots of old material...only contacts and the most important I think could be the solution. This goes for many people who having problem after Belle update. I call it spring cleaning.
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro -
Strange behavior while installing extensions
I recently installed Adobe CS4 Design Premium on my laptop with Snow Leopard. When I was installing the Nokia WRT extension via the extension manager, Firefox suddenly started itself unintentionally and pointed to a non-existing web page:
http://www.diamond.com/calendarobject/description.htm
This was a strange behavior I never encountered before.
May I ask whether this is a problem of the software (Adobe or Firefox) or the OS (virus or something)?
Thanks very much.I would suggest contacting the developer of the extension first to make sure it is not an intended feature to open a browser window upon a successful installation. If it is a virus/spyware, which is possible but rare on a Mac, I would first do the following:
-Make sure Firefox and all installed extensions are up-to-date
-Run ClamXAV ( http://www.clamxav.com/ )
-Lastly, boot up from your OSX disc and repair permissions to make sure everything is in order. -
Strange behavior when "trying" to burn a disk.
At least I think this is strange behavior, following the instructions in the help viewer, topic "Backing up your music to a CD or DVD." One thing for sure, it's not burning a disc and it ain't telling me why.
I select the playlist and click "Burn Disc"
Requests a blank disc. I insert one.
Message "checking media"
after about a minute, the disc ejects
Message "checking media" displays another 30 seconds
No other messages displayed.
What the ??? Shouldn't it at least display an error message??
Super-Drive information..... from System Profiler
MATSHITA DVD-R UJ-845C:
Firmware Revision: DPP9
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Using Sony DVD+R discs.
Mac Mini Mac OS X (10.4.8)Whoops, sorry, this was while burning a playlist.
I've also tried some Pleomax CD disks (Samsung), with no luck. I've tried burning directly from iTunes, and from Toast 7.
Of the types I've tried, the Sony DVD's have been the best for me. Haven't tried many types though. Maybe I can get disks one at a time until I find a brand my burner likes.
Still, isn't it strange that there is NO error message? It just quits?
Mac Mini Mac OS X (10.4.8) -
Is it possible to start planning manager programatically from backend through PL/SQL?
I need to activate and run Planning manager concurrent program from back end through PL/SQL.Actually i am working on MRP Open Forecast Interface and I want to run this program after inserting data in the interface table mrp_forecast_interface.Please guide me.
Oracle EBS forum is the best place for your question. This place is more towards general SQL, PL/SQL questions.
https://community.oracle.com/community/oracle-applications/e-business_suite/e-business-suite-technology/general_ebs_discussion -
Strange Behavior from iTunes 7.2
Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
Major pain and very time consuming.
So it is not adding songs correctly, but through way too much effort able to work around this.
2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
Any suggestions??
Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
Have you repaired permissions with Disk Utility?
Is your Quicktime up to date? At least version v7.1.5.
MJ -
11.5.10.2 Planning Manager MRCRLF
We are upgrading from 11.5.8 to 11.5.10.2 and are having difficulty with the status of the planning manager. In 11.5.8 it cylcles based on a period of time and enters a log in the planning manager form every time it runs. Therefore its status changes from "Pending" to "Running" based on the cycle time you have specified. However in 11.5.10.2 it does not appear to cylcle the setup is the same and you specify a cycle period but after the first cylce completes it stays in a state of "Running" and no log entries are made in the planning manager form. Can anybody confirm if this is new functionality or as anybody come across the same issue.
Thanks
KeithOur Planning Manager concurrent requests cycle normally. Maybe you can review the following notes:
What Does the Profile Option MRP:Planning Manager Run First Time Do?
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=276702.1
Planning Manager Running Forever After Upgrade To 11.5.10
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=457848.1
MRCRLF Planning Manager Runs Continuously - Performance
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=369283.1 -
Strange behavior - icon thumbnail instead of image - CC@OSX10.10
Hi,
my CC (@OS X 10.10.3) showing a strange behavior using vanishing point filter.
After defining grid and try to paste the image OS X paste the icon thumbnail instead of the image,
Many thanks in advance!!
br
JoachimIt is probably related to the fact that you are setting the tables row height in the renderer this will fire a render message when the height changes. One height is applied to all rows of a table. This means that is you have images of different heights you are continually changing the tables row height and therefore continually rendereing.
My approach would be to have all the images fit into a set size ( say 64*64 ( with scaling if neccesary ) you could then have a popup show the full size image if required.
Maybe you are looking for
-
OAM File and Scroll effects Not AutoPlaying in Muse
Hello I placed an OAM file in muse which contained a slideshow ( slideshow is a basic slideshow provided by muse ) and i noticed that it doesn't work when i activate the edge animate scroll effects. The autoplay function does not work, nor does the "
-
my iphoto is not working and it says to reinstall from appstore but in the appstore it shows already installed and there is no option to reinstall. do I need to try to move my current iphoto to the trash? if so what about all my pictures
-
Re: Skype to go numbers do not work
My Skype to Go number is not working. If I dial from a mobile or landline, I get an engaged tone
-
How to define MasterSpread page size ?
Hi erverybody, I'm looking for a way to create a new master with a custom page size. I can create a new Master with this : myDocument.masterSpreads.add(1, {baseName:'NewMaster', namePrefix:'A'}); I try many options, but nothing seems to work.. myDocu
-
IOS 7.1.2 permanently iCloud password request, iMessage issue
I have an iPhone 4S. Since the last update the phone requested my Apple-ID-Password 3-6 times a day. A few days ago the phone deactivated the iCloud sync an deleted my contacts, calendar etc. An other day it deactivated iMessage. I have to activate i