Strange behavior of wrt54g

hi there
I installed the ddns service from dyndns. But wrt54g cannot update the entry. The errormessage is switching: "Name resolver fail, DDNS update fail!" or " Update in progress".
Sometimes there is also no entry unter status in the dns and the Subnetmask. Althought dns servers are forwarded to the computers connected to the wrt54g and the connection is working. So the problem is only that wrt54g is unable to resolve the dyndns name.
any ideas?
running firmware v1.00.9
cheers

Try this:
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=1040
Pay particular attention to the part about cloning the MAC address of your PC's ethernet adapter........
This is something that has worked for many of us that have experienced the same issues, including myself. Let us know how things work out.
jhw

Similar Messages

WVC54GCA strange behavior

Hey Guys, I've added my fifth camera. And the rest work great and can access remotely. But my fifth one is a WVC54GCA with audio. And I am getting strange behaviors. For example, when I'm hard wired , I am able to view the video by browsing to the camera. However, when I configure wireless, and not even go wireless, still connected via LAN I can't view the video, it is almost as if the web server in it get hosed, even the graphics change and the Linksys banner is missing and I see this at the top of each menu page:File menu_setup.htm not found. Also another example, is under admin, the buttons for firmware upgarde and factory reset are invisible, I can still tab to them and use them. That's why I think it is a web server issue with itself. I am on rev V1.00R24, my other cam that is behaving correctly is on R22.
When I go wireless, same problem, I am unable to browse to the camera to view the image, however, I am able to see the picture via the video monitoring utility. I can browse to the camera to 'administer' it but even that doesn't work right either. Especially the basic menu. If I try changing anything, LED, or time or anything, I get a error saying invalid subnet mask. When I didn't change it, plus it is obviously correct since I can browse to it. The cameras address is 192.168.1.122/24 and the gateway is 192.168.1.23, the same mask and DG on all my other cameras.
I've rebooted the camera and the linksys router and still get the same issue. Has anyone got any ideas? I am barely ok, since I can view the image via the monitor utlity, but it would be nice if the camera work correctly like the other 4. Is their a limit to the number of wireless cam's? I have 5 total now.

I to have had strange issues with the WVC54GCA. I have two cameras. I set them up in my office first for testing. The final place they will be is at my summer place for monitoring when I'm away. I had a break-in last year.
In the office I had issues primarily with the motion detection email feature. It simply would not work. The test messages work just fine every time. So I know the email config information is correct. I'm not sure if we just did not wait long enough or if it was the scheduled capture we setup, however it seems that until we setup a scheduled capture and deleted it; the motion capture would not work. So after about 3 hours of testing and cofiguring and resetting we had it capturing pics and video. BTW we are using a VRV200 at the office.
Next, took the camera's out to the summer place. Setup them up from scratch, did a hard reset. Main issue, same as in the office (using a wrt54g at the summer place) not doing a capture. Test email works fine, No capture. Not even after playing the set a scheduled capture trick. Tried everything I can think of, no luck, no capture. As you can imagine, if it won't capture, then it is useless for remote monitoring of a summer place.
I checked for a firmware update for the WVC54GCA, however its brand-d-new, so there is only one version of the firmware and that's the one that came on the camera.
Any ideas would be welcomed. I must have a capture solution. Maybe I just need to buy a more expensive camera.
Message Edited by EmarioC on 06-07-2008 08:18 AM
Message Edited by EmarioC on 06-07-2008 08:19 AM

Strange behavior when "trying" to burn a disk.

At least I think this is strange behavior, following the instructions in the help viewer, topic "Backing up your music to a CD or DVD." One thing for sure, it's not burning a disc and it ain't telling me why.
I select the playlist and click "Burn Disc"
Requests a blank disc. I insert one.
Message "checking media"
after about a minute, the disc ejects
Message "checking media" displays another 30 seconds
No other messages displayed.
What the ??? Shouldn't it at least display an error message??
Super-Drive information..... from System Profiler
MATSHITA DVD-R UJ-845C:
Firmware Revision: DPP9
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Using Sony DVD+R discs.
Mac Mini Mac OS X (10.4.8)

Whoops, sorry, this was while burning a playlist.
I've also tried some Pleomax CD disks (Samsung), with no luck. I've tried burning directly from iTunes, and from Toast 7.
Of the types I've tried, the Sony DVD's have been the best for me. Haven't tried many types though. Maybe I can get disks one at a time until I find a brand my burner likes.
Still, isn't it strange that there is NO error message? It just quits?
Mac Mini Mac OS X (10.4.8)

Strange Behavior with gMSA in Server 2012 R2

Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
Nick

VIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
    + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
   ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick

Strange Behavior from iTunes 7.2

Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
Major pain and very time consuming.
So it is not adding songs correctly, but through way too much effort able to work around this.
2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
Any suggestions??
Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.

First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
Have you repaired permissions with Disk Utility?
Is your Quicktime up to date? At least version v7.1.5.
MJ

Strange behavior - icon thumbnail instead of image - CC@OSX10.10

Hi,
my CC (@OS X 10.10.3) showing a strange behavior using vanishing point filter.
After defining grid and try to paste the image OS X paste the icon thumbnail instead of the image,
Many thanks in advance!!
br
Joachim

It is probably related to the fact that you are setting the tables row height in the renderer this will fire a render message when the height changes. One height is applied to all rows of a table. This means that is you have images of different heights you are continually changing the tables row height and therefore continually rendereing.
My approach would be to have all the images fit into a set size ( say 64*64 ( with scaling if neccesary ) you could then have a popup show the full size image if required.

Strange behavior in report Output

Hi,
Strange behavior in report output , please some one help me out of this problem.
I am using Oracle order capture rdf file ASOPQTEL.rdf.
My working environment:
Windows,apps instance .Now this rdf file is working fine in my work Environment.
when this same file is deployed in client environment (UNIX and different apps instance from my working environment apps instance)
for some cases it is giving output.
for some cases it's throughing error.
Thanks,
Mithun

Please specify what kind of error you are getting and what is command you are firing on Unix.

Strange behavior of the Macbook pro display

Hi to all
I'm using my MacBook pro, and notice some strange behavior after open several windows or applications, I don't know how to explain, so here is a photo:
http://www.flickr.com/photos/86155326@N00/
I have tried: go back to 10.4.6 / create a new account / Hardware test... and Nothing.
Any suggestions?
Pedro

I am having the exact same problem(and no one is replying to my post either), I read in another post of someone who had a somewhat similar issue and someone commented that it was bad VRAM and warranted the logic board to be replaced. I'm hoping this is not the case, or at least hoping the problem does not get worse because I am in school and can't be without this computer for 2 weeks while it gets repaired..I'm hoping I can last til the holidays...
pictures of my problem:
http://www.rpi.edu/~neala/pics/display/Messed%20up%20desktop.png
http://www.rpi.edu/~neala/pics/display/Picture%204.png
Sometimes I can make it go away by moving windows, and sometimes that makes it worse... this computer is only 100 days old...come on apple..help us out!

Report FP_TEST_00 - Strange behavior

Hello Gurus,
A strange behavior with report FP_TEST_00 occurs:
SA38 --> FP_TEST_00 --> select a device --> execute --> print preview then and error or popup is show:
Adobe Reader
Error initializing the font server module
Then the SAP GUI is closed, I check the ST22 and no dump is generated and in transaction SM21 only appear:
DP Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
DP Q0 I Operating system call recv failed (error no. 232 )
The #1 log entry: *
Details Page 2 Line 28 System Log: Local Analysis of sapdev                   1
Time     Type Nr Clt User TCode Grp N Text
11:37:20 DP                     Q0 4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
11092      Dispatcher                                           K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text..........              Caller.... Reason/cal
dpxxdisp   1223 551 ADMIN       86 HUSVP-SAP-BA DpRTmPr    NiBufRe
Documentation for system log message Q0 4 :
The SAP Dispatcher (part of the application server) has lost the
connection to a terminal process. For example, this happens when the
terminal program (GUI) terminates without correctly logging off the
application server. More detailed information about the error
context is not available here.
Technical details
File Offset RecFm System log type             Grp N variable message data
   21 254340 m     Error (Function,Module,Row) Q0 4 551 ADMIN       86 HUSVP-SAP-BA     DpRTmPrNiBufRedpxxdisp1223
The #2 Log show: *
Details Page 2 Line 29 System Log: Local Analysis of sapdev                   1
Time     Type Nr Clt User TCode Grp N Text
11:37:20 DP                     Q0 I Operating system call recv failed (error no. 232 )
Operating system call recv failed (error no. 232 )
Details
Recording at local and central time........................ 25.02.2010 11:37:20
Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
11092      Dispatcher                                           K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text        Caller.... Reason/cal
nixxi.cp   4435           recv232 NiIRead    recv
Documentation for system log message Q0 I :
The specified operating system call was returned with an error.
For communication calls (receive, send, etc) often the cause of errors
are network problems.
It could also be a configuration problem at operating system level.
(file cannot be opened, no space in the file system etc.).
Additional specifications for error number 232
Name for errno number ECONNRESET
No documentation available for error ECONNRESET
Technical details
File Offset RecFm System log type             Grp N variable message data
21 254520 m     Error (Function,Module,Row) Q0 I           recv232                     NiIReadrecv   nixxi.cp4435
Edited by: Hernando Polania Cadena on Feb 25, 2010 8:36 PM

Hello All,
I applied the solution in page
http://wiki.sdn.sap.com/wiki/display/PLM/Adobe%209%20-%20SAPGUI%20crash
Works OK
Thanks
Hernando

Strange behavior when I try to match a mpeg2 video with the menu size image

hello all,
got a strange behavior when I try to match a mpeg2 video with the menu size image,
menu size is 1920 x 1080 (photoshop file)
mpeg2 video 1920 x 1080 (1second 19 frames)
the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
why encore treats the video size and picture differently?
it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
thankl you all

Hi all
I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
Using Encore,PS,AE CS4
DVD format SD PAL DV widescreen
I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
In the properties panel the menu Aspect Ratio 16:9
The AE transistions PAR is SD PALwidescreen 1.4587.
I did try the Blu Ray suggestion above but the same distortion was apparent.
Any suggestions short of squashing the video to match the menu would be welcomed.
Thanks

Strange behavior of textareas in BPEL Worklist (10.1.2)

I have a very strange behavior with linebreaks in all my <textarea>s in the BPEL-Worklist-jsps: (they work fine as <INPUT>s
Example:
Default-text:
line1
I update the textarea to:
line1
line2
-> hit update
line1
*** (second line is completly missing)
-> hitting update again (no change in text)
line2line1
*** (all on one line with the new line in front)
As Value I use:
<%=PayloadFormGenerator.selectNodeValue(payload, "/ns0:task/ns0:payload/ns1:abstract", form.getNamespaceMap(),"string", context.getLocale())%>
and as mentioned: It works fine for <INPUT>.
What do I do wrong? Is this a bug?
Daniel
Message was edited by:
user552073

Had the same problem, could not get it to be consistent. I would say this is a bug, but decided to edit payloads via the database in the end...

Strange behavior with Zoom and Image control

HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

Strange behavior of "Partial message encryption " in OWSM

Strange behavior of “Partial message encryption “ in OWSM
If message format is like this
<cban:transferFund xmlns:cban="http://cbank.com">
<cban:arg0>string</cban:arg0>
<cban:arg1>string</cban:arg1>
</cban:transferFund>
Then body element configuration in message encryption setting
Name space http://cbank.com
Element arg0
is working fine
But my requirement is for below message
<cban:transferFund xmlns:cban="http://cbank.com">     <
<arg0>string</arg0>
<arg1>string</arg1 >
</cban:transferFund>
For this
Name space : http://cbank.com
Element : I tried all possible combination but none is working
I tried these
:arg0
//:arg0
//cban:arg0
//cban//arg0
cban:arg0
With Regards
Siddharth

Had the same problem, could not get it to be consistent. I would say this is a bug, but decided to edit payloads via the database in the end...

Strange behavior after using NIK plug-ins

Every once in a while I encounter this strange behavior of Aperture. I first process the NEF's in Aperture (white balance, Exposure, Enhance... and, when needed, Cropping) and then I fine tune the image with the NIK plug-ins; when needed DfIne 2.0, Viveza, Color Efex Pro 3.0 and Sharpener Pro 3.0 Output Sharpener.
If I look at the processed picture then, I get a perfect presentation of the photo;
!http://users.skynet.be/fc419085/Aperture-1.jpg!
But when I press Z to zoom into a 100% preview I get this;
!http://users.skynet.be/fc419085/Aperture-2.jpg!
When I select the Loup in the normal view mode I get this;
!http://users.skynet.be/fc419085/Aperture-3.jpg!
This doesn't happen with all my pictures, yesterday I processed a series of 8 pictures an 6 of them showed this behavior the other two acted normal and I can't see what I did differently whit these last two.
When I export the strangely behaving photo's to a Tiff or a Jpeg, I get perfectly normal pictures.
The original NEF behaves normal. I have seen this behavior with NEF's from a Nikon D200, D2x and a D300. I have Aperture 2.1.2 running on a 2.33 GHz Intel Core Duo MacBook Pro running Mac OS X 10.5.6
Does anybody know what's happening and if so, how to solve this problem?
Cheers,
Ivan

I did some testing and what I found is too weird to be true.
First this mashed up look doesn't only happen after using NIK plug-ins, it also happens when making a roundtrip to Photoshop, given that certain conditions are met.
Give it a try yourself. Crop an image to an uneven pixelcount dimension, for example 4227 x 2797 and make a roundtrip to Photoshop. Then have a 100% view look at the new image in Aperture. You'll have a mashed up view, at least I do.
Now crop the same original image to an even pixelcount dimension, for example 4228 x 2798 and make an roundtrip to Photoshop once more. When you have a 100% view of the new image now, you'll see a perfectly normal photo.
Do you think Aperture developers are reading this forum?

Strange behavior from a PB G4 (Part 2)

On to my next issue. Often when I'm typing the insertion point will jump to someplace other than where it should be or just disappear all together. I'm not doing anything to cause it to do this. I've been being really carefull to not to do anything wrong. I'ts often enough to be a real nuisance. It happened 7 times during my first post (Strange behavior from a PB G4) and 3 times during this one. Please help. Thanks.

Igor_G5 wrote:
... I thought about putting in a larger drive but when I looked up instructions for it i was surprized at how difficult it was.
Did you use the iFixit website? It has excellent pictures and instructions that are easy to follow.
Replacing any hard disk drive will be challenging for a paraplegic, but with someone's help it can be done fairly inexpensively. There are many tiny fasteners that require tiny tools. Use an egg carton to store them, separated by their location in the PowerBook.
Earlier PowerBooks are easier to work on than later ones.
I still use a PowerBook G4 on occasion, mostly for importing video for editing in iMovie. I upgraded its original 60 GB HD to a much larger one. If you were to do this you would need to locate the PowerBook's original System Install DVD to install and subsequently update OS X and all its original programs.
If you ensure at least a few gigabytes free space, I think most of your problems will be fixed. When free disk space gets down to a few hundred megabytes or less, performance will suffer dramatically. You don't want it to ever get anywhere near that low. Strange things start to happen.
Keep the number of icons on the Desktop to a minimum also. That makes a difference, for reasons that I do not fully understand.

Strange behavior of wrt54g

Similar Messages

Maybe you are looking for