Strange behavior printing  image

I'm printing an jpg of a piece of sculpture, and if I look at the image in Photoshop all of the highlights are completely blown out. However, when I place the image into InDesign, the highlights have detail, and the image becomes much too dark overall (actually it matches the jpg's icon view in the Finder). And when I print the file, the image has the same dark tones as the InDesign preview (doesn't matter whether I use typical or high quality display).
But if I go into Photoshop and adjust the curves just slightly, the InDesign screen and printed image look just like the original blown-out Photoshop view.
There aren't any adjustment layers in the image.
Any ideas?
Thank you
(InDesign 7.0.2, os x 10.6.7)
Chris

Yeah, that might be important. Do you still have the original unadulterated version of that file? Does Bridge say it has an embedded profile?
Chris Vogel25 wrote:
I checked the separation preview, and for the orginal super-contrast jpg, I'm seeing values in the 30% range for all process colors.
That's a sort of medium gray color. Are you looking at the highlights, midtones, or what? The numbers you see in the panel are reflective of the pixel under the cursor position.
It still seems strange to see the huge shift between the original jpg and InDesign preview, no matter was the interpolation, downsampling, profile mismatch was.
If you are dealing with an image that was captured in a wide-gamut space such as ProPhoto and that has no emebedded profile, there's a pretty good chance that the color would darken if ID or shift quite a bit when you bring it into an ID doc whose working space is something more normal like Adobe RGB or sRGB. Even an embedded profile would probably see a shift if the colormanagement policy is set to do anything other than preserve the embedded profile on mismatch. Do you see a big color shift when switching from regular view to overprint preview (which happens when you turn on separations)? A lot of the colors you can capture in wide-gamut color spaces fall outside the gamuts of printing devices.

Similar Messages

  • Strange behavior with images from iPhone

    I'm wondering if anyone else has seen this behavior or can replicate.
    Take some pictures using an iPhone 3Gs (can't tell if it happens with other models).
    Bring the images into iPhoto and then drag them out to regular folders.
    Choose Cmd/Ctrl-D to place.
    The image, which is in Portrait orientation, comes into CS5 strangely.
    The frame does not hug the correct orientation of the image. Instead it follows a landscape orientation as if the image was rotated 90 degrees.
    When you let go from dragging the frame, the image appears vertical within the lanscape frame.
    The only way to get the frame any way close to the vertical orientation is to hold the Shift key.
    I have also noticed that these images are added to a video editing program rotated into a landscape mode.

    There's no such thing as a vertical or horizontal image with iPhones or any phone that sports and accelerometer. It's just a tag they add to images that is inconsistently supported. All photos are landscape, just some are tagged to indicate they are portrait. It's like when I was growing up I always thought my dad was Superman only to later find out he was just a drunk wearing a cape.
    If you want to just pull the images directly off the phone or just a generally nice thing for your iPhone/Pod/Pad you can get PhoneDisk. Costs nothing and works great other than my minor user interface complaint that they take advantage of the menubar's menuextras area that is supposed to be Apple only and hardware only at that. Human Interface Guidelines aside, it is a really nice utility.
    http://www.macroplant.com/phonedisk/

  • Strange behavior - icon thumbnail instead of image - CC@OSX10.10

    Hi,
    my CC (@OS X 10.10.3) showing a strange behavior using vanishing point filter.
    After defining grid and try to paste the image OS X paste the icon thumbnail instead of the image,
    Many thanks in advance!!
    br
    Joachim

    It is probably related to the fact that you are setting the tables row height in the renderer this will fire a render message when the height changes. One height is applied to all rows of a table. This means that is you have images of different heights you are continually changing the tables row height and therefore continually rendereing.
    My approach would be to have all the images fit into a set size ( say 64*64 ( with scaling if neccesary ) you could then have a popup show the full size image if required.

  • Strange behavior when I try to match a mpeg2 video with the menu size image

    hello all,
    got a strange behavior when I try to match a mpeg2 video with the menu size image,
    menu size is 1920 x 1080 (photoshop file)
    mpeg2 video 1920 x 1080 (1second 19 frames)
    the idea is to go from the menu link to the next sub menu with a video as transition, using the same image on the video as the menu and then zooming in (in my case through a door) to end up after the zoom in the next level menu.
    I try to achieve a smooth change from the first play menu picture to the video image into the next level menu picture,
    everything works good but when I watch it on the preview mode on the left and right side of the video it shows a black bar at least 15 to 25 pixel wide, that means the video image appears smaller and it causes a little jump what is preety disturbing and can not be sold as a professional work.
    why encore treats the video size and picture differently?
    it's gratful appreciated if somebody who got experience in a transition I mentioned obove posting any solution,
    thankl you all

    Hi all
    I'm having a very similar problem with Encore. My menu items are distorting (a minor but infuriating squashing top and bottom) when previewed.
    Using Encore,PS,AE CS4
    DVD format SD PAL DV widescreen
    I created 3 menu frameworks and 3 video transistions to link them in AE. On the final frame of each transistion in AE I saved the frame with Composition>Save Frame to> Photoshop Layers. In PS i added the button functionality and saved.
    In Encore I use Dynamic link to import AE transistions as timelines and imported each PS menu twice, once as "menu" and once as an asset.
    When I link the timeline transistions to the menu and preview at the point the menu begins the whole image is squashed. When the next transistion is activated the image returns to its original size.
    Thinking it was the use of PS that was causing the menus to distort I used the menu asset directly in the time line. Obviously no menu functionality but also no distortion. The AE transistion flowed straight into the "menu" just as I expected.
    In the properties panel the menu Aspect Ratio 16:9
    The AE transistions PAR is SD PALwidescreen 1.4587.
    I did try the Blu Ray suggestion above but the same distortion was apparent.
    Any suggestions short of squashing the video to match the menu would be welcomed.
    Thanks

  • Strange behavior with Zoom and Image control

    HELP - I have a strange behavior (bug?) with using Zoom
    effect on an Image that has been placed on a Canvas. I am using
    dynamically instantiated images which are placed on a canvas inside
    a panel. I then assign a Zoom IN and Zoom Out behavior to the
    image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
    is that the image jumps around on the Zoom OUT and lands on a
    random place on the canvas instead of coming back to the original
    spot. This is especially true if the mouse goes in and out of the
    image very quickly. HELP -- what am I doing wrong? Computer = Mac
    OS X 10.4.9 Flex 2.0.1
    Here's a simple demo of the bug -- be sure to move the mouse
    in and out rapidly:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute" creationComplete="setUp();">
    <mx:Script><![CDATA[
    import mx.events.EffectEvent;
    import mx.effects.Fade;
    import mx.effects.Zoom;
    import mx.rpc.events.ResultEvent;
    import flash.display.Sprite;
    import mx.core.UIComponent;
    import mx.controls.Image;
    private var zoomIn:Zoom;
    private var zoomOut:Zoom;
    private function setUp():void {
    var image:Image = new Image();
    image.id = "album_1_1";
    image.x = 200;
    image.y = 200;
    image.width = 64;
    image.height = 64;
    image.source = "
    http://s3.amazonaws.com/davidmccallie/album-128.jpg";
    image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
    image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
    myCanvas.addChild(image);
    zoomIn = new Zoom();
    zoomIn.zoomHeightTo = 2.0;
    zoomIn.zoomWidthTo = 2.0;
    zoomIn.captureRollEvents = true;
    zoomIn.suspendBackgroundProcessing = true;
    zoomOut = new Zoom();
    zoomOut.zoomHeightTo = 1.0;
    zoomOut.zoomWidthTo = 1.0;
    zoomOut.captureRollEvents = true;
    zoomOut.suspendBackgroundProcessing = true;
    private function doZoom(event:MouseEvent):void {
    var image:Image = Image(event.currentTarget);
    if (event.type == MouseEvent.ROLL_OVER) {
    zoomIn.target = event.currentTarget;
    zoomIn.play();
    } else if (event.type == MouseEvent.ROLL_OUT) {
    zoomOut.target = event.currentTarget;
    zoomOut.play();
    ]]>
    </mx:Script>
    <mx:Panel width="100%" height="100%"
    layout="absolute">
    <mx:Canvas id="myCanvas" width="100%" height="100%">
    </mx:Canvas>
    </mx:Panel>
    </mx:Application>

    There must be bugs in the Zoom effect code -- I changed the
    Zoom to Resize in the above code, and it works perfectly. Of
    course, Resize is not as nice as Zoom because you can't set the
    resize to be around the center of the image, but at least it works.
    Does anyone know about bugs in the Zoom effect?

  • Strange behavior in deleting images - works on second but not first try

    In Library mode, Grid view, right after importing, after I select several images with an "x" to be deleted, when I bring up the "Delete Rejected Photos" dialog, I find this strange behavior. I get the message that there are not photos marked for deletion. I then invoke the dialog again, and my photos that were marked show up, with the choices of deleting from disk or removing from the catalog. What am I likely doing wrong? I'm on WinXP Pro with LR 2.2. Thanks!
    Dilip

    Dilip,
    I too have seen this behaviour in all versions of LR. Even when deleting a single image in the develop module. If LR is writting the preview you can't delete the file until the preview is rendered. I think it's more to do with the OS not allowing the deletion of a file being accessed than a LR bug as such.
    Gordon

  • Report FP_TEST_00 - Strange behavior

    Hello Gurus,
    A strange behavior with report FP_TEST_00 occurs:
    SA38 --> FP_TEST_00 --> select a device --> execute --> print preview then and error or popup is show:
    Adobe Reader
    Error initializing the font server module
    Then the SAP GUI is closed, I check the ST22 and no dump is generated and in transaction SM21 only appear:
    DP  Q0  4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
    DP  Q0  I Operating system call recv failed (error no. 232 )
    The #1 log entry: *
    Details Page 2 Line 28 System Log: Local Analysis of sapdev                   1
    Time     Type Nr Clt User TCode Grp N Text
    11:37:20 DP                     Q0  4 Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
    Connection to user 551 (ADMIN ), terminal 86 (HUSVP-SAP-BA) lost
    Details
    Recording at local and central time........................ 25.02.2010 11:37:20
    Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
    11092      Dispatcher                                           K  SAP Web AS Problem STSK
    Further details for this message type
    Module nam Line Error text..........              Caller.... Reason/cal
    dpxxdisp   1223 551  ADMIN       86  HUSVP-SAP-BA DpRTmPr    NiBufRe
    Documentation for system log message Q0 4 :
    The SAP Dispatcher (part of the application server) has lost the
    connection to a terminal process.  For example, this happens when the
    terminal program (GUI) terminates without correctly logging off the
    application server.  More detailed information about the error
    context is not available here.
    Technical details
    File Offset RecFm System log type             Grp N variable message data
       21 254340 m     Error (Function,Module,Row) Q0  4 551  ADMIN       86  HUSVP-SAP-BA     DpRTmPrNiBufRedpxxdisp1223
    The #2 Log show: *
    Details Page 2 Line 29 System Log: Local Analysis of sapdev                   1
    Time     Type Nr Clt User TCode Grp N Text
    11:37:20 DP                     Q0  I Operating system call recv failed (error no. 232 )
    Operating system call recv failed (error no. 232 )
    Details
    Recording at local and central time........................ 25.02.2010 11:37:20
    Task...... Process    User...... Terminal Session TCode Program Cl Problem cl         Package
    11092      Dispatcher                                           K  SAP Web AS Problem STSK
    Further details for this message type
    Module nam Line Error text        Caller.... Reason/cal
    nixxi.cp   4435           recv232 NiIRead    recv
    Documentation for system log message Q0 I :
    The specified operating system call was returned with an error.
    For communication calls (receive, send, etc) often the cause of errors
    are network problems.
    It could also be a configuration problem at operating system level.
    (file cannot be opened, no space in the file system etc.).
    Additional specifications for error number 232
    Name for errno number ECONNRESET
    No documentation available for error ECONNRESET
    Technical details
    File Offset RecFm System log type             Grp N variable message data
      21 254520 m     Error (Function,Module,Row) Q0  I           recv232                     NiIReadrecv   nixxi.cp4435
    Edited by: Hernando Polania Cadena on Feb 25, 2010 8:36 PM

    Hello All,
    I applied the solution in page
    http://wiki.sdn.sap.com/wiki/display/PLM/Adobe%209%20-%20SAPGUI%20crash
    Works OK
    Thanks
    Hernando

  • Strange behavior after using NIK plug-ins

    Every once in a while I encounter this strange behavior of Aperture. I first process the NEF's in Aperture (white balance, Exposure, Enhance... and, when needed, Cropping) and then I fine tune the image with the NIK plug-ins; when needed DfIne 2.0, Viveza, Color Efex Pro 3.0 and Sharpener Pro 3.0 Output Sharpener.
    If I look at the processed picture then, I get a perfect presentation of the photo;
    !http://users.skynet.be/fc419085/Aperture-1.jpg!
    But when I press Z to zoom into a 100% preview I get this;
    !http://users.skynet.be/fc419085/Aperture-2.jpg!
    When I select the Loup in the normal view mode I get this;
    !http://users.skynet.be/fc419085/Aperture-3.jpg!
    This doesn't happen with all my pictures, yesterday I processed a series of 8 pictures an 6 of them showed this behavior the other two acted normal and I can't see what I did differently whit these last two.
    When I export the strangely behaving photo's to a Tiff or a Jpeg, I get perfectly normal pictures.
    The original NEF behaves normal. I have seen this behavior with NEF's from a Nikon D200, D2x and a D300. I have Aperture 2.1.2 running on a 2.33 GHz Intel Core Duo MacBook Pro running Mac OS X 10.5.6
    Does anybody know what's happening and if so, how to solve this problem?
    Cheers,
    Ivan

    I did some testing and what I found is too weird to be true.
    First this mashed up look doesn't only happen after using NIK plug-ins, it also happens when making a roundtrip to Photoshop, given that certain conditions are met.
    Give it a try yourself. Crop an image to an uneven pixelcount dimension, for example 4227 x 2797 and make a roundtrip to Photoshop. Then have a 100% view look at the new image in Aperture. You'll have a mashed up view, at least I do.
    Now crop the same original image to an even pixelcount dimension, for example 4228 x 2798 and make an roundtrip to Photoshop once more. When you have a 100% view of the new image now, you'll see a perfectly normal photo.
    Do you think Aperture developers are reading this forum?

  • Strange Behavior In IE 8

    First off I would like to say how happy I am to find an active comunity of GoLive users. I had lost my copy of GoLive during a computer change. I tried several times to make the transition to DreamWeaver and hated it with a passion. It literally sucked all the joy out of creatinyg websites for me. I have been inactive for that reason for quite sometime.
    Just recently I decided to start a new project and was thrilled when I was able to aquire a legal copy of GoLive CS2 from a coworker who had upgraded to CS5 and no longer had a use for CS2.
    So here is my problem. I just finished designing and building a small site as a corporate identity site. I am very happy with the design but when it first loads it exhibits some strange behavior. In IE8 the logo on the index page on first load comes up out of place. I have to refresh to make it come together correctly. Then the page transitions are the ugliest thing I've ever seen. Going from one page to the next produces a hidious flash. Everything looks and works fine in FireFox.
    My first thought is that it has something to do with the encoding.
    Here is the URL:
    http://www.ffdminc.com
    Any suggestions would be greatly appreciated.
    Thanks
    Ron

    rcates00 wrote:
     ... thrilled when I was able to aquire a legal copy of GoLive CS2 from a coworker who had upgraded to CS5 and no longer had a use for CS2....
    If the license of CS2 was used to upgrade, then your co-worker had no right to pass off CS2 or any part of it. You may not really be legal. But if you used their media to install your own license, you are fine.
    Your problems might be due to the table-based design you have used. You may do much better by moving forward with CSS and reusing images instead of pushing an entirely new set of image files with each page.
    The flicker/transitions may appear in any browser where the images are not yet cached.

  • Strange behavior with obssocookie on different browser

    Hi,
    I am trying to integrate OAM with our application deployed on WLS. I have set up an IIS proxy server and installed a web gate on it. I have seen a couple of strange behavior
    1) If I try to access some static image file, SSO keeps asking for authentication. It happens for both firefox and IE, but it doesn't happen for chrome though. Looks like for image file request, the obssocookie is not passed correctly. Anyone sees that before?
    2) If I use firefox on the machine where WLS app server is installed to connect to proxy server, if I use hostname in the URL, I don't see the obssocookie. If I use IP address in the URL, I can see obssocookie. If I use IE or any browser from any other machine, obssocookie is always available
    thanks.
    -Wei

    I found it in the document
    B.1 How Logout Works
    The WebGate logs a user out when it receives a URL containing "logout." (including the "."), with the exceptions of logout.gif and logout.jpg, for example, logout.html or logout.pl. When the WebGate receives a URL with this string, the value of the ObSSOCookie is set to "logout."
    The Access System sets an obSSOCookie for each user or application that accesses a resource protected by a WebGate. The obSSOCookie enables users to access resources that are protected by the Access System that have the same or a lower authentication level. Removing the ObSSOcookie causes the WebGate to log the user out and requires the user to re-authenticate the next time he or she requests a resource that is protected by the Access System.
    Well, I havn't got that far in the document:)
    Thanks a lot for your help.
    -Wei

  • Strange behavior of stop control with events

    I have found some strange behavior while using stop controls. I have a main vi which has two while loops. One of them is used to continuosly acquire the images. The other while loop has event structure that has several booleans which trigger different events. Both the while loops are operated using the same stop. My problem is this. None of the events get triggered when I press the buttons for them. However if I keep the stop value true( which stops the acquisition) and then click the event buttons all of them work fine. so every time I want an event to run I first change this stop value to true and then press the button for the event to fire. I want to know what is causing this? Why is th stop button influencing the behavior
    of other events?

    If your while loops are completely independent then it whould work. I've attached a simple example in LabVIEW 6.1 that shows a while loop with an event structure and another running continuously. A single stop button stops both but until then, the event structure will respond to clicking on two other Booleans in the VI.
    Attachments:
    Two_While_Loops.vi ‏24 KB

  • Strange behavior of system with enabled FileVault2, Roaming profile

    Hello,
    I have encountered strange behavor of my Macbook Air after some testing.
    Macbook Air 2012 was newly installed with 10.8.4 and joined network account server on 10.8.4 server with Roaming profile (synced with server home directory). After installing some basic apps like iWork I turned on FileVault.
    Then I start to have the strange behavior - iWorks are not displaying content of document - it seams blank - just white screen without any borders where should be at least lines in numbers or empty cells.
    Another display problem is in Safari. On same pages (even default Top SItes) it`s flashing and especially when scrolling.
    Did you encountered something similar? I`m not able to get rid of it.
    Computers was used for some time before turining on FIle Vault and problem started to occur after this action. Disabling of FileVault didn`t helped (properly restarted between steps).
    I didn`t found anything strange in Console or elsewhere..

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Strange behavior of merged clips on import

    After much troubleshooting I've noticed more strange behavior in the reimport of merged clips from XML...
    I have merged clips made out of film transfer and the audio from an aiff file. I can export and xml of a merged clip... all of about 30 seconds and when I reimport the clip from xml it is like 47 minutes long and will not reconnect the audio part of the merged clip. That is actually happening to ALL of my merged clips in a current film project.

    Yes, all phones are 111, all faxes are 222 and all mobiles are 333
    Please see these images:
    Test-Database in Excel:
    Export from Excel:
    Import into Adress Book:
    The result(s) (see the aligning of "Andere" (=phone), Fax and Mobile):

  • Strange behavior of Content area

    Hello everybody,
    I'm working with Portal 3.0.8. I've installed czech language on it.
    What did I do is:
    1) I made new look for my navigation bar (new image and basic items). And it worked fine. I worked in English!
    2) Change language to Czech.
    3) Show my content area and there were old items on navigation bar. But style was new. If I navigate to any sub-folder, the look is OK. In the root folder I can't change anything. I can add new items only, though it is possible to see them only when I work in English.
    Does anybody know the reason of this strange behavior and what I should do? Thanks for your help!
    Petra :-)
    P.S.: You can use this email address: [email protected]

    Sorry for copy paste problem. b1 should be replaced with y1 and c1 with z1.
    Here is the correct code.
    create table xmltab of XMLType XMLTYPE store as binary xml;
    Table created.
    insert into xmltab values('<x><y>y1</y><z>z1</z></x>');
    1 row created.
    select x.object_value
    from xmltab x
    where extractValue(x.object_value,'/x/y')='y1' and
    extractValue(x.object_value,'/x/z')='z1' ;
    OBJECT_VALUE
    <x>
      <y>y1</y>
      <z>z1</z>
    </x>
    The following query doesn't return any row!!
    select x.object_value
    from xmltab x
    where extractValue(x.object_value,'/x/y')='y1' and
    extractValue(x.object_value,'/x/z')='z1' for update;
    no rows selected
    select x.object_value
    from xmltab x
    where extractValue(x.object_value,'/x/y')='y1' for update;
    OBJECT_VALUE
    <x>
      <y>y1</y>
      <z>z1</z>
    </x>
    select x.object_value
    from xmltab x
    where extractValue(x.object_value,'/x/z')='z1' for update;
    OBJECT_VALUE
    <x>
      <y>y1</y>
      <z>z1</z>
    </x>
    The following one returns correct result !!
    select x.object_value, extractValue(x.object_value,'/x/y'), extractValue(x.object_value,'/x/z')
    from xmltab x
    where extractValue(x.object_value,'/x/y')='y1' and
    extractValue(x.object_value,'/x/z')='z1' ;
    OBJECT_VALUE
    EXTRACTVALUE(X.OBJECT_VALUE,'/x/y')
    EXTRACTVALUE(X.OBJECT_VALUE,'/x/z')
    <x>
      <y>y1</y>
      <z>z1</z>
    </x>
    y1
    z1
    I get expected result for all the cases if the table is created in the following way
    create table xmltab of XMLType;
    Can anyone tell me why does select for update behaves in this strange way for binary xml table?

  • Strange behavior of JTable..Help plz

    Hi,
    Assume i have 5 rows in my JTable. I wrote a function on right click i get a popup window with an option delete row, which deletes the row successfully,
    The problem is when i sort the data in JTable. on column click JTable is getting sorted, in which assume 2nd row got replaced with 4th row and vice versa.
    Now when i try to delete the 4th row, it is delete the 2nd row data, which was there at the place of 4th row before sorting. In this regard i am trying to print the row number before deleting. It is displaying as 4th, but deleting 2nd row.
    Hope i am clear. Please suggest me in solving this strange behavior of JTable sorting problem.
    Regards,
    Ravi

    MyTableModel tablemodel = new MyTableModel(colnames,values);
    TableSorter sorter = new TableSorter(tablemodel);
    JTable table = new JTable(sorter)
    tablemodel.removeRow(row); // last line is the code where i am deleting the row, it's deleting the wrong row.
    do i need to remove the last line code and make respective changes in TableSorter.java class.
    ore
    here itself do i need to do some changes. ?
    There is a method that will convert the view row to the model row private Row[] getViewToModel()
    my question is how TableSorter.java class comes to know that i am deleting the perticular row.

Maybe you are looking for