Strange behavior with obssocookie on different browser

Hi,
I am trying to integrate OAM with our application deployed on WLS. I have set up an IIS proxy server and installed a web gate on it. I have seen a couple of strange behavior
1) If I try to access some static image file, SSO keeps asking for authentication. It happens for both firefox and IE, but it doesn't happen for chrome though. Looks like for image file request, the obssocookie is not passed correctly. Anyone sees that before?
2) If I use firefox on the machine where WLS app server is installed to connect to proxy server, if I use hostname in the URL, I don't see the obssocookie. If I use IP address in the URL, I can see obssocookie. If I use IE or any browser from any other machine, obssocookie is always available
thanks.
-Wei

I found it in the document
B.1 How Logout Works
The WebGate logs a user out when it receives a URL containing "logout." (including the "."), with the exceptions of logout.gif and logout.jpg, for example, logout.html or logout.pl. When the WebGate receives a URL with this string, the value of the ObSSOCookie is set to "logout."
The Access System sets an obSSOCookie for each user or application that accesses a resource protected by a WebGate. The obSSOCookie enables users to access resources that are protected by the Access System that have the same or a lower authentication level. Removing the ObSSOcookie causes the WebGate to log the user out and requires the user to re-authenticate the next time he or she requests a resource that is protected by the Access System.
Well, I havn't got that far in the document:)
Thanks a lot for your help.
-Wei

Similar Messages

Strange behavior with "insertTextAsContent"

Hi,
I've got a strange behavior with this loop :
for (j = 0; j < myParagraph.characters.length-1; j++) {
     var myCharacter = myParagraph.characters[j];
     if (myCharacter.appliedFont.fontStyleName == "Regular") {
          alert(myCharacter.contents);
          myXmlElement.insertTextAsContent(myCharacter.contents, XMLElementPosition.ELEMENT_END);
I loop through every characters of a paragraph, test if they are "regular", "italic", "bold"..., and store them in different xmlElement. Everything is fine except that every double characters (in french : homme, cette, elle, ville...) output in my xmlElement as one only character (home, cete, ele, vile...). I try with "aaaaaazzzzzzeeeeeerrrrrtttttyyyyy" and it give me, the same way, "azerty" ?!
The "alert" line output the correct full sentences character by character ("h", "o", "m", "m", "e"...).
If you have any idea to explain, you are more than welcome
Thanks
** edit : don't know if it's important but I'm using CS6 **

Hi
Have you seen this in the object model viewer?
XMLElement.insertTextAsContent (using:varies, position: XMLElementPosition ): Text
Adobe InDesign CC (8.0) Object Model
Inserts the specified text as content before, in, or after the XML element.
using: Data Type: varies
The text to be inserted. Can accept: String or SpecialCharacters enumerator.
position: Data Type: XMLElementPosition
The position at which to insert the text. Note that text inserted before or after the element does not become part of the content of the element. Instead, it becomes content of the parent of the element.
Don't ask me why it works when there is no doubled character
So i tried the following and it worked. I hope this will solve your problem.
function main() {
     if (app.documents.length != 0) {
        var myDoc = app.activeDocument;
        var myParagraph = myDoc.textFrames[0].paragraphs[0];
        var myXmlElement = myDoc.xmlElements[0];
        for (j = 0; j < myParagraph.characters.length-1; j++) {
            var myCharacter = myParagraph.characters[j];
            if (myCharacter.appliedFont.fontStyleName == "Regular") {
                alert(myCharacter.contents);
                myXmlElement.contents += myCharacter.contents;
                alert(">" + myXmlElement.contents+ "<");
            }     // if
        }     //for
    }     // if
}   // main()
Kind regards
Dani (from Switzerland)

Strange behavior with csv flat file integration

Hi,
i've a real strange behavior with csv flat file integration.
I've defined the file inbound with | as separator
Here is the sender payload result, extra columns appears !
<row>
<VAL1>D</VAL1>
<VAL2 />
<VAL3>01</VAL3>
<VAL4 />
<VAL5 />
<VAL6>003160000</VAL6>
<VAL7 />
<col>003160001</col>
<col />
<col>2</col>
<col />
<col>91200604212</col>
<col />
<col>VIRTUAL DJ HOME EDITION</col>
<col />
<col>2</col>
<col />
<col>2</col>
<col />
<col />
<col>2</col>
<col />
</row>
When i changed the separator to ; in my file and in the file inbound it gives the following.
Everything is ok.
<row>
<VAL1>D</VAL1>
<VAL2>01</VAL2>
<VAL3 />
<VAL4>003160000</VAL4>
<VAL5>003160001</VAL5>
<VAL6>7</VAL6>
<VAL7>91200604212</VAL7>
<col>VIRTUAL DJ HOME EDITION</col>
<col>10</col>
<col>10</col>
<col />
<col>10</col>
</row>
Why using a different separator would change the payload ?
It will be a good thing for me if I could use the pipe separator.
Thanks

Can you give the steps you're using to get this error? I'm not seeing any problem here.
1) Create a new audio project (44.1 KHz).
2) Arm the record head in track 1 by pressing the "R" button in that track. Verify audio levels.
3) Record by pressing the record button in the audio controls.
4) Stop recording by pressing the stop button.
5) Play back the resulting audio. Sounds fine.
6) Select File > Export.
7) Change the file format to WAVE file. Change the bit depth to 16 bit, change the sample rate to 44.1 KHz.
8) Type the name SAVETEST.wav and click on the Export button.
9) Play back the resulting WAV file in QuickTime Player, Apple Loops Utility, etc. and it seems just fine.
What am I missing that you're doing?

Strange behavior with DefaultCellEditor

Hello everybody,
I found a strange behavior with DefaultCellEditor using a JTextField in a JTable. The following line will show, what I mean:
setDefaultCellEditor(String.class,new DefaultCellEditor(new JTextField()));
Imho this should do the same as JTable does already, when it installs a JTextField as default cell editor for cell values of the String class. But, it seems, that it is not the same:
When I add this line in the constructor of a JTable subclass the editor component seems to be less wide and less high to the right and bottom - it looks so with Win95 with JDK 1.4.0 - but with Win2000 it is correct for example.
My question is - how can it be, that the normal default cell editor does not have this behavior but when I use the line above, it is displayed in the wrong way?- What does the default cell editor in another way than I do it, that it has not this ugly display?
I would like to look in the sources, but unfortunately I can't find the source code in JDK 1.4.0 - perhaps you have a hint, where to find it.
greetings Marsian

It seems the Label doesn't like it, that it is in a GridCell with rowspan = 2
If it is in a normal cell (no rowspan), it works.
If I add ColumnConstraints to the gridpane, it kind of works, but the Label still occupies more space than it should.
Edited by: csh on 19.07.2012 03:51

Strange behavior with Collections

Hello!
I have a - from my point of view - strange behavior with a List (same also applies to Vector, LinkedList, and others):
List<String> myList = new myList<String>;
myList.add("One");
while (true) {
try {
System.out.println(myList.size());
throw new Exception();
} catch (Exception e) {
e.printStackTrace();
}And the result is 1, 2, 2, 2, ...although I added only one element. The two elements in the List point to the same object.
What could case this issue?
Regards,

len00x wrote:
List<String> myList = new myList<String>;This doesn't even look like it will compile for at least one reason, easily two.

Strange behavior with Label#setWrapText(true) in GridPane.

I've got a strange behavior with a Label, which has setWrapText(true) in a GridPane.
Check out the sample and click the button.
You see, that the GridPane suddenly behaves as if it had GridPane.setVGrow and HGrow set for the lblStatus.
(it takes the full available space).
Furthermore the first column shrinks to a minimum, so that lblText1 can't display its text anymore.
Tested with 2.1 GA.
Any help with that?
import javafx.application.Application;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.geometry.Insets;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.Label;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class TestApp4 extends Application {
    public static void main(String[] args) {
        launch(args);
    @Override
    public void start(final Stage stage) throws Exception {
        GridPane gridPane = new GridPane();
        gridPane.setPadding(new Insets(2, 2, 2, 2));
        Label lblText1 = new Label();
        lblText1.textProperty().set("Some text");
        Label lblText2 = new Label();
        lblText2.textProperty().set("Some other text");
        Button btnClick = new Button();
        btnClick.textProperty().set("Click me");
        final Label lblStatus = new Label();
        lblStatus.setWrapText(true);
        gridPane.add(lblText1, 0, 0, 1, 1);
        gridPane.add(lblText2, 1, 0);
        gridPane.add(lblStatus, 0, 2, 2, 1);
        gridPane.add(btnClick, 0, 3, 2, 1);
        btnClick.setOnAction(new EventHandler<ActionEvent>() {
            @Override
            public void handle(ActionEvent actionEvent) {
                lblStatus.setText("very long text, very long text, very long text, very long text,very long text, very long text");
        gridPane.setGridLinesVisible(true);
        Scene scene = new Scene(gridPane, 300, 300);
        stage.setScene(scene);
        stage.show();
}Edited by: csh on 19.07.2012 03:35

It seems the Label doesn't like it, that it is in a GridCell with rowspan = 2
If it is in a normal cell (no rowspan), it works.
If I add ColumnConstraints to the gridpane, it kind of works, but the Label still occupies more space than it should.
Edited by: csh on 19.07.2012 03:51

Strange behavior with Bindings??

Hello to all JavaFX 2 Binding experts,
I have a strange behavior with Bindings in JavaFX 2.2 (Java 1.7 update 21). Please have a look at the following source code:
package test;
import javafx.application.Application;
import javafx.beans.binding.BooleanBinding;
import javafx.beans.property.SimpleBooleanProperty;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.fxml.FXML;
import javafx.fxml.FXMLLoader;
import javafx.scene.Parent;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.control.RadioButton;
import javafx.stage.Stage;
public class BindingVsProperty extends Application
    @FXML
    private RadioButton opt11;
    @FXML
    private RadioButton opt12;
    @FXML
    private RadioButton opt21;
    @FXML
    private RadioButton opt22;
    @FXML
    private Label lbl11And21;
@Override
    public void start(Stage arg0) throws Exception
        FXMLLoader l_loader = new FXMLLoader();
        l_loader.setLocation(BindingVsProperty.class.getResource("BindingVsproperty.fxml"));
        l_loader.setController(this);
        l_loader.load();
        Scene l_scene = new Scene((Parent)l_loader.getRoot());
        arg0.setScene(l_scene);
        useBinding1();
        //useBinding2();
        //useBinding3();
        arg0.show();
    private void useBinding1() // NOT WORKING - ChangeListener.changed(..) is not called
        BooleanBinding l_andOpt11Opt21 = opt11.selectedProperty().and(opt21.selectedProperty());
        l_andOpt11Opt21.addListener(new ChangeListener<Boolean>()
            @Override
            public void changed(ObservableValue<? extends Boolean> arg0, Boolean arg1, Boolean arg2)
                System.out.println("Opt 1.1 AND Opt 2.1 changed to: " + arg2);
    private void useBinding2() // OK - ChangeListener.changed(..) is called
        BooleanBinding l_andOpt11Opt21 = opt11.selectedProperty().and(opt21.selectedProperty());
        lbl11And21.visibleProperty().bind(l_andOpt11Opt21);
        l_andOpt11Opt21.addListener(new ChangeListener<Boolean>()
            @Override
            public void changed(ObservableValue<? extends Boolean> arg0, Boolean arg1, Boolean arg2)
                System.out.println("Opt 1.1 AND Opt 2.1 changed to: " + arg2);
    private void useBinding3() // NOT WORKING - ChangeListener.changed(..) is not called
        BooleanBinding l_andOpt11Opt21 = opt11.selectedProperty().and(opt21.selectedProperty());
        new SimpleBooleanProperty(false).bind(l_andOpt11Opt21);
        l_andOpt11Opt21.addListener(new ChangeListener<Boolean>()
            @Override
            public void changed(ObservableValue<? extends Boolean> arg0, Boolean arg1, Boolean arg2)
                System.out.println("Opt 1.1 AND Opt 2.1 changed to: " + arg2);
    public static void main(String[] args)
        launch(args);
<?xml version="1.0" encoding="UTF-8"?>
<?import java.lang.*?>
<?import java.util.*?>
<?import javafx.scene.control.*?>
<?import javafx.scene.layout.*?>
<?import javafx.scene.paint.*?>
<BorderPane id="BorderPane" maxHeight="-Infinity" maxWidth="-Infinity" minHeight="-Infinity" minWidth="-Infinity" prefWidth="371.0" xmlns:fx="http://javafx.com/fxml">
<center>
    <AnchorPane prefHeight="200.0" prefWidth="200.0">
      <children>
        <Label id="lblAnd" fx:id="lbl11And21" layoutX="82.0" layoutY="121.0" text="Group1 Opt1 AND Group2 Opt1 is true" textFill="#41cc00" visible="false" />
        <RadioButton fx:id="opt21" layoutX="216.0" layoutY="24.0" mnemonicParsing="false" text="Group 2 - Opt 1">
          <toggleGroup>
            <ToggleGroup fx:id="group2" />
          </toggleGroup>
        </RadioButton>
        <RadioButton fx:id="opt22" layoutX="216.0" layoutY="67.0" mnemonicParsing="false" text="Group 2 - Opt 2" toggleGroup="$group2" />
        <RadioButton fx:id="opt11" layoutX="29.0" layoutY="24.0" mnemonicParsing="false" text="Group 1 - Opt 1">
          <toggleGroup>
            <ToggleGroup fx:id="group1" />
          </toggleGroup>
        </RadioButton>
        <RadioButton fx:id="opt12" layoutX="29.0" layoutY="67.0" mnemonicParsing="false" text="Group 1- Opt 2" toggleGroup="$group1" />
      </children>
    </AnchorPane>
</center>
</BorderPane>
What I need for my application is the use case in useBinding1(), i.e., a BooleanBinding where several listeners are attached to. The problem is that I never get a callback in the ChangeListener if one of the RadioButton.selectedProperty() is changed.
Now I tried what happens if I use the same BooleanBinding for another binding to a property plus the listener, now the listener gets callbacks as expected! (see useBinding2() )
Than I thought may be Bindings must be bound in order to trigger listeners and tried useBinding3() where I bind the BooleanBinding to a new BooleanProperty, in this case the listener doesn't get callback anymore...
And now I'm very frustrated and hope that anyone out there can help me to understand this strange behavior.
Thanks a lot!
WhiteAntelope

All these work just fine for me: the listeners are all called as expected. Note that the listener is only invoked when the value of the binding actually changes, which doesn't happen every time a radio button is pressed. (For example, if both buttons are unselected, the binding is false. If one button is selected, the binding remains false and the listener is not invoked. When the second button is selected, the binding becomes true, and the listener is invoked.)

Strange behavior with NI 9401

Hi everyone!
I think I have a strange problem with the NI 9401 modules.
My hardware is a CompactRIO and I'm using Labview 8.0.
I'm reading a 13 bit encoder with two NI 9401 modules: the first for 8 input channels and the second for the other remaining 5. input channels.
13 bits means that the slots in the outest part of the counter are 8192 so i expect my encoder to count up/down till 8192. What instead happens is that the counter goes up to 7934, then suddenly to 7860, then from 0 to 254 and then finally to 0 again and up again to 7934 and the story always goes on like this. I put the true/false outputs of the encoder in a boolean array and then, from the boolean array to a number. (see the attacched VI)
Here's how I devided the inputs between the two modules
-NI 9401 2 :
DIO0= 2^0
DIO1= 2^1
DIO2= 2^2
DIO3= 2^3
DIO4= 2^4
DIO5= 2^5
DIO6= 2^6
DIO7= 2^7
- NI 9401
DIO0= 2^8
DIO1= 2^9
DIO2= 2^10
DIO3= 2^11
DIO4= 2^12
When running the VI I suddenly realized that every time all the input for each modules should be true ( i.e. five leds on for the second module or eight leds on for the first) , the value of all the inputs goes immediately to 0 i.e. all the leds switch off . To make an example: I see 4 leds on for the second module but when comes the time of the fifth, all the leds switch off so it means all the inputs are false which i can't understand. I tried to change the pin assignments in order to read the same inputs from different pins and this did'nt change anything. I tried to use only 4 inputs for the second module and this didn't work. Every time all the inputs for each module should be true it goes up to (n-1) inputs true and the n inputs zero. More information about this strange behaviour: while a normal false input produces a voltage of 0.036 V the voltage I measured from the last pin that should be true and that should give me all the leds on for one module, produces instead -0.146 V.
This is everything I tried in order to solve this problem but now I'm at a dead end.
Could it be a kind of module setting which I didn't consider?
Due to all the attempts I've made I excluded any disfunction of the encoder so I focused my attention to the modules.
Does anyone of you have any idea?
Thanks!!
Rob_F
Attachments:
Prova_encoder2.lvproj ‏14 KB
Prova_encoder2.vi ‏155 KB

Thanks a lot JMota!
We just sent back the encoder to the company who sells them. They want to be sure it's not a product defect or, even worse, a problem of conflict with the NI 9401.
In the meanwhile we built up the acquisition VI for the accelerometer and the encoder. One while loop sends the accelerometer data to a DMA FIFO and another parallel while loop is used to read the encoder outputs and send these data to another DMA FIFO. I did this because I know only 1 DMA FIFO can be used for each channel. When I read the data with two FIFO.read with two parallel loops in the Real-Time I discovered that I can't make them work indipendently as i thought i.e. reading settings of one FIFO.read ( number of elements and loop timing) affects also the other FIFO.read .
Any explanation for this behavior?
Thanks again JMota!

Strange Behavior with gMSA in Server 2012 R2

Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
Nick

VIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
    + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
   ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick

Strange behavior with Zoom and Image control

HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

Strange behavior with Firefox

Hi Team,
I am using HTMLDB V2.0 and Firefox V1.5.0.1. I used wizard to create a report/form application. However, when I press a button to update the form all the buttons line up in a vertical row and I then have to press the same button again.
My application is 30412 at htmldb.oracle.com. The problem is occurring at page 4. Go to page 3 (2nd tab) and select any record. You will be directed to page 4. Then when you press any button (cancel, create, delete, apply changes) on page 4, page 4 is refreshed and the buttons strangely line up in a vertical column. I then have to press the same button again before the update occurs.
I have the same report/form setup on pages 1 and 2 and it is working fine on those pages.
This strange behavior is not occurring in IE. I also notice that the font size is bigger in IE .
I would appreciate any help you might offer.
I really enjoy working with HTMLDB.
Thanks, Andy

Sorry about that. I removed all the authorization schemes from the application. I also changed the authentication scheme to HTMLDB. Let me know if I need to do something more for you to get access.
Thanks for looking at it.
I think it may have something to do with the "button, alternative 3" template from theme 3 that I am using. When I switch to the "button" template from theme 3 then the strange behavior goes away in Firefox.
Andy

Aperture - strange behavior with external editor

Although I don't do this often, there are times I need to edit images with a 3rd party editor like Elements or Pixelmator. I noticed when I send an image by Photos> Edit with Pixelmator, the image that comes in is lacking any edits I may have created previously, particularly with Nik filters. Obviously, those edited versions are not being exported to the editor correctly. However, if I first "export" the image, and then bring it in an editor, the edits are carry over as one would expect. I am using the latest versions of both Aperture and Lion.
Anyone else noticing this and is there a way to change this strange behavior?
Ken

Hi Perfectism-
Most likely it is a bad power supply brick. This can be difficult to troubleshoot as the drive appears to spin up and the little light blinks but that is about all you get.
If the drive is still under warranty contact LaCie about replacing the power supply brick.
Luck-
-DP

Outlook strange behavior with error 0x800CCC13 Cannot connect to the network. Verify your network connection or modem

Hi guys,
I am having a strange behavior in my environment. We are running Exchange 2010 with Outlook 2007 for client access. Some of these clients needs to access some pop3 accounts from diferent vendors.
About 2 weeks ago, we start getting error Ox800CCC13 (as described above) when users try to send email through their pop3 accounts in Outlook. This only happens to about 5 out of 100 users. I have removed the pop3 account and readded it. I was able to send
just one email out then issue was back.
Next, I tried sending out simple text message with no attachment. No luck. However, I noticed when I remove the signature (10 kb gif image) I was able to send out a few emails. However, issue is back with or without signature.
For more testing, I added Mozilla Thunderbird client for the pop3 account with no exchange account and so far no error. Emails are sending out fine. I would appreciate any insight please.

Hi,
This problem may occur if the Outlook 2007 client computer does not have a default gateway configured.
For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.To
add this DWORD value yourself, follow these steps.
Outlook 2007
1.
Click Start, click Run, type regedit in the Open box, and then click OK.
2.
Locate and then click the following subkey:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC
3.
On the Edit menu, point to New, and then click DWORD Value.
4.
Type DefConnectOpts, and then press ENTER.
5.
Right-click DefConnectOpts, and then click Modify.
6.
In the Value data box, type 0, and then click OK.
7.
Exit Registry Editor.
Sincerely
Harry

[SOLVED] i3-wm strange behavior with feh

greetings,
I'm having problems with i3-wm, it seems to work pretty well but when I add a wallpaper through feh, it gives me this:
[i3bar/src/xcb.c:903] ERROR: Cannot open display
I tried all kind of setups, like, changing a jpg image to a new png image because I thought it was corrupted, removed some parameters from /etc/X11/xorg.conf and edited xinitrc several times but, unfortunately, not successful either.
This is my ~/.xinitrc.
exec /usr/bin/i3 -V >> ~/.i3/i3log 2>&1 &
feh --bg-center /home/freesbies/Pictures/ctrl-esc.jpg
This is my /etc/X11/xorg.conf (I need to work on "Files" section, since I need to add more fonts, but that's other issue that isn't a i3-wm relative problem for this topic ).
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "dbe"
Load "dri"
Load "dri2"
Load "GLcore"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS"
EndSection
Section "Extensions"
Option "composite" "Enable"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
Option "DRI" "on"
Option "AGPMode" "8"
Option "AGPFastWrite" "yes"
Option "ColorTiling" "on"
Option "ColorTiling2D" "on"
Option "RenderAccel" "on"
Option "AccelMethod" "EXA"
Option "EXAVSync" "on"
Option "EXAPixmaps" "on"
Option "EnablePageFlip" "on"
Identifier "Card0"
Driver "radeon"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
This is my unfinished ~/.i3/config file.
# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
# Should you change your keyboard layout somewhen, delete
# this file and re-run i3-config-wizard(1).
# i3 config file (v4)
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
set $mod Mod4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below. ISO 10646 = Unicode
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, if you need a lot of unicode glyphs or
# right-to-left text rendering, you should instead use pango for rendering and
# chose a FreeType font, such as:
font pango:DejaVu Sans Mono 10
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# start a terminal
bindsym $mod+Return exec i3-sensible-terminal
# kill focused window
bindsym $mod+Shift+q kill
# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+h split h
# split in vertical orientation
bindsym $mod+v split v
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# focus the child container
#bindsym $mod+d focus child
# switch to workspace
bindsym $mod+1 workspace Terminal
bindsym $mod+2 workspace File
bindsym $mod+3 workspace Editor
bindsym $mod+4 workspace IDE
bindsym $mod+5 workspace Browser
bindsym $mod+6 workspace Mail
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym j resize shrink width 10 px or 10 ppt
bindsym k resize grow height 10 px or 10 ppt
bindsym l resize shrink height 10 px or 10 ppt
bindsym semicolon resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 10 px or 10 ppt
bindsym Down resize grow height 10 px or 10 ppt
bindsym Up resize shrink height 10 px or 10 ppt
bindsym Right resize grow width 10 px or 10 ppt
# back to normal: Enter or Escape
bindsym Return mode "default"
bindsym Escape mode "default"
bindsym $mod+r mode "resize"
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
colors {
background #82826d
statusline #ffffff
separator #839091
focused_workspace #000000 #826d78 #ffffff
position top
status_command i3status
workspace_buttons yes
tray_output primary
This is ~/.i3/i3log file.
21-10-2013 17:27:56 - i3 4.6 (2013-08-07, branch "tags/4.6") starting
21-10-2013 17:27:56 - Parsing configfile /home/freesbies/.i3/config
deciding for version 4 due to this line: # i3 config file (v4)
21-10-2013 17:27:56 - [libi3] libi3/font.c Using Pango font DejaVu Sans Mono, size 10
21-10-2013 17:27:56 - Used number -1 for workspace with name Terminal
21-10-2013 17:27:56 - Starting bar process: i3bar --bar_id=bar-0 --socket="/run/user/1000/i3/ipc-socket.1033"
21-10-2013 17:27:56 - executing: i3bar --bar_id=bar-0 --socket="/run/user/1000/i3/ipc-socket.1033"
[i3bar/src/xcb.c:903] ERROR: Cannot open display
This is what I get from xorg's prompt.
X.Org X Server 1.14.3
Release Date: 2013-09-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.11.1-1-ARCH i686
Current Operating System: Linux bootnet 3.11.6-1-ARCH #1 SMP PREEMPT Sat Oct 19 00:29:46 CEST 2013 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=538af765-2d19-4cf4-ba0f-7ae3f0428563 rw quiet
Build Date: 08 October 2013 08:51:37PM
Current version of pixman: 0.30.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 21 17:27:55 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
(II) [KMS] Kernel modesetting enabled.
xinit: connection to X server lost
waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
And finally, this is /var/log/Xorg.0.log.
[ 3939.905]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 3939.917] X Protocol Version 11, Revision 0
[ 3939.922] Build Operating System: Linux 3.11.1-1-ARCH i686
[ 3939.926] Current Operating System: Linux bootnet 3.11.6-1-ARCH #1 SMP PREEMPT Sat Oct 19 00:29:46 CEST 2013 i686
[ 3939.926] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=538af765-2d19-4cf4-ba0f-7ae3f0428563 rw quiet
[ 3939.936] Build Date: 08 October 2013 08:51:37PM
[ 3939.941]
[ 3939.947] Current version of pixman: 0.30.2
[ 3939.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3939.958] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3939.982] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 21 17:55:35 2013
[ 3939.988] (==) Using config file: "/etc/X11/xorg.conf"
[ 3939.995] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3940.001] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3940.002] (==) ServerLayout "X.org Configured"
[ 3940.002] (**) |-->Screen "Screen0" (0)
[ 3940.002] (**) | |-->Monitor "Monitor0"
[ 3940.002] (**) | |-->Device "Card0"
[ 3940.002] (**) |-->Input Device "Mouse0"
[ 3940.002] (**) |-->Input Device "Keyboard0"
[ 3940.002] (==) Automatically adding devices
[ 3940.002] (==) Automatically enabling devices
[ 3940.002] (==) Automatically adding GPU devices
[ 3940.003] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 3940.003] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 3940.003] (WW) Ignoring unrecognized extension "composite"
[ 3940.003] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 3940.003] (WW) Disabling Mouse0
[ 3940.003] (WW) Disabling Keyboard0
[ 3940.003] (II) Loader magic: 0x8259620
[ 3940.003] (II) Module ABI versions:
[ 3940.003] X.Org ANSI C Emulation: 0.4
[ 3940.003] X.Org Video Driver: 14.1
[ 3940.003] X.Org XInput driver : 19.1
[ 3940.003] X.Org Server Extension : 7.0
[ 3940.004] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3940.007] (--) PCI:*(0:1:5:0) 1002:4337:103c:0850 rev 0, Mem @ 0xd8000000/134217728, 0xd0300000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 3940.013] Initializing built-in extension Generic Event Extension
[ 3940.020] Initializing built-in extension SHAPE
[ 3940.028] Initializing built-in extension MIT-SHM
[ 3940.034] Initializing built-in extension XInputExtension
[ 3940.040] Initializing built-in extension XTEST
[ 3940.047] Initializing built-in extension BIG-REQUESTS
[ 3940.052] Initializing built-in extension SYNC
[ 3940.058] Initializing built-in extension XKEYBOARD
[ 3940.064] Initializing built-in extension XC-MISC
[ 3940.070] Initializing built-in extension SECURITY
[ 3940.075] Initializing built-in extension XINERAMA
[ 3940.081] Initializing built-in extension XFIXES
[ 3940.086] Initializing built-in extension RENDER
[ 3940.091] Initializing built-in extension RANDR
[ 3940.096] Initializing built-in extension COMPOSITE
[ 3940.101] Initializing built-in extension DAMAGE
[ 3940.106] Initializing built-in extension MIT-SCREEN-SAVER
[ 3940.111] Initializing built-in extension DOUBLE-BUFFER
[ 3940.116] Initializing built-in extension RECORD
[ 3940.121] Initializing built-in extension DPMS
[ 3940.125] Initializing built-in extension X-Resource
[ 3940.130] Initializing built-in extension XVideo
[ 3940.134] Initializing built-in extension XVideo-MotionCompensation
[ 3940.139] Initializing built-in extension XFree86-VidModeExtension
[ 3940.143] Initializing built-in extension XFree86-DGA
[ 3940.147] Initializing built-in extension XFree86-DRI
[ 3940.151] Initializing built-in extension DRI2
[ 3940.151] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 3940.151] (II) LoadModule: "extmod"
[ 3940.152] (II) Module "extmod" already built-in
[ 3940.152] (II) LoadModule: "glx"
[ 3940.152] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3940.152] (II) Module glx: vendor="X.Org Foundation"
[ 3940.153] compiled for 1.14.3, module version = 1.0.0
[ 3940.153] ABI class: X.Org Server Extension, version 7.0
[ 3940.153] (==) AIGLX enabled
[ 3940.157] Loading extension GLX
[ 3940.157] (II) LoadModule: "dbe"
[ 3940.157] (II) Module "dbe" already built-in
[ 3940.157] (II) LoadModule: "dri"
[ 3940.157] (II) Module "dri" already built-in
[ 3940.157] (II) LoadModule: "dri2"
[ 3940.157] (II) Module "dri2" already built-in
[ 3940.157] (II) LoadModule: "radeon"
[ 3940.157] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 3940.160] (II) Module radeon: vendor="X.Org Foundation"
[ 3940.160] compiled for 1.14.2, module version = 7.2.0
[ 3940.160] Module class: X.Org Video Driver
[ 3940.160] ABI class: X.Org Video Driver, version 14.1
[ 3940.160] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI
[ 3940.169] (++) using VT number 1
[ 3940.169] (II) [KMS] Kernel modesetting enabled.
[ 3940.169] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 3940.169] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 3940.169] (==) RADEON(0): Default visual is TrueColor
[ 3940.170] (**) RADEON(0): Option "EnablePageFlip" "on"
[ 3940.170] (**) RADEON(0): Option "ColorTiling" "on"
[ 3940.170] (**) RADEON(0): Option "ColorTiling2D" "on"
[ 3940.170] (**) RADEON(0): Option "RenderAccel" "on"
[ 3940.170] (**) RADEON(0): Option "AccelMethod" "EXA"
[ 3940.170] (**) RADEON(0): Option "EXAVSync" "on"
[ 3940.170] (**) RADEON(0): Option "EXAPixmaps" "on"
[ 3940.170] (==) RADEON(0): RGB weight 888
[ 3940.170] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 3940.170] (--) RADEON(0): Chipset: "ATI Radeon IGP330M/340M/350M (U2) 4337" (ChipID = 0x4337)
[ 3940.170] (II) Loading sub module "dri2"
[ 3940.170] (II) LoadModule: "dri2"
[ 3940.170] (II) Module "dri2" already built-in
[ 3940.170] (II) Loading sub module "exa"
[ 3940.170] (II) LoadModule: "exa"
[ 3940.170] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 3940.171] (II) Module exa: vendor="X.Org Foundation"
[ 3940.171] compiled for 1.14.3, module version = 2.6.0
[ 3940.171] ABI class: X.Org Video Driver, version 14.1
[ 3940.171] (II) RADEON(0): KMS Color Tiling: enabled
[ 3940.171] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 3940.171] (II) RADEON(0): KMS Pageflipping: enabled
[ 3940.171] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 3940.207] (II) RADEON(0): Output VGA-0 using monitor section Monitor0
[ 3940.207] (II) RADEON(0): Output LVDS has no monitor section
[ 3940.213] (II) RADEON(0): Output S-video has no monitor section
[ 3940.250] (II) RADEON(0): EDID for output VGA-0
[ 3940.250] (II) RADEON(0): EDID for output LVDS
[ 3940.250] (II) RADEON(0): Manufacturer: LGP Model: 657 Serial#: 0
[ 3940.250] (II) RADEON(0): Year: 1990 Week: 0
[ 3940.250] (II) RADEON(0): EDID Version: 1.3
[ 3940.250] (II) RADEON(0): Digital Display Input
[ 3940.250] (II) RADEON(0): Max Image Size [cm]: horiz.: 30 vert.: 23
[ 3940.250] (II) RADEON(0): Gamma: 2.20
[ 3940.250] (II) RADEON(0): No DPMS capabilities specified
[ 3940.250] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3940.250] (II) RADEON(0): First detailed timing is preferred mode
[ 3940.250] (II) RADEON(0): redX: 0.587 redY: 0.343 greenX: 0.320 greenY: 0.529
[ 3940.250] (II) RADEON(0): blueX: 0.158 blueY: 0.140 whiteX: 0.312 whiteY: 0.328
[ 3940.250] (II) RADEON(0): Manufacturer's mask: 0
[ 3940.250] (II) RADEON(0): Supported detailed timing:
[ 3940.250] (II) RADEON(0): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 3940.250] (II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 3940.250] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 3940.250] (II) RADEON(0): Unknown vendor-specific block 0
[ 3940.250] (II) RADEON(0): Unknown vendor-specific block 0
[ 3940.250] (II) RADEON(0): EDID (in hex):
[ 3940.250] (II) RADEON(0): 00ffffffffffff0030f0570600000000
[ 3940.250] (II) RADEON(0): 00000103801e17780a72b09657528728
[ 3940.250] (II) RADEON(0): 23505400000001010101010101010101
[ 3940.250] (II) RADEON(0): 01010101010164190040410026301888
[ 3940.250] (II) RADEON(0): 360030e4100000180000000000000000
[ 3940.250] (II) RADEON(0): 0000000000000000000000000000004c
[ 3940.250] (II) RADEON(0): 475068696c6970734c43440a00000000
[ 3940.250] (II) RADEON(0): 004c503135305830382d413500000023
[ 3940.250] (II) RADEON(0): Printing probed modes for output LVDS
[ 3940.250] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 3940.250] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 3940.250] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 3940.250] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 3940.250] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 3940.256] (II) RADEON(0): EDID for output S-video
[ 3940.256] (II) RADEON(0): Output VGA-0 disconnected
[ 3940.256] (II) RADEON(0): Output LVDS connected
[ 3940.256] (II) RADEON(0): Output S-video disconnected
[ 3940.257] (II) RADEON(0): Using exact sizes for initial modes
[ 3940.257] (II) RADEON(0): Output LVDS using initial mode 1024x768
[ 3940.257] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3940.257] (II) RADEON(0): mem size init: gart size :3dff000 vram size: s:4000000 visible:3cc0000
[ 3940.257] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 3940.257] (==) RADEON(0): DPI set to (96, 96)
[ 3940.257] (II) Loading sub module "fb"
[ 3940.257] (II) LoadModule: "fb"
[ 3940.257] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3940.257] (II) Module fb: vendor="X.Org Foundation"
[ 3940.258] compiled for 1.14.3, module version = 1.0.0
[ 3940.258] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3940.258] (II) Loading sub module "ramdac"
[ 3940.258] (II) LoadModule: "ramdac"
[ 3940.258] (II) Module "ramdac" already built-in
[ 3940.258] (--) Depth 24 pixmap format is 32 bpp
[ 3940.258] (II) RADEON(0): [DRI2] Setup complete
[ 3940.258] (II) RADEON(0): [DRI2] DRI driver: radeon
[ 3940.258] (II) RADEON(0): [DRI2] VDPAU driver: radeon
[ 3940.258] (II) RADEON(0): Front buffer size: 3072K
[ 3940.258] (II) RADEON(0): VRAM usage limit set to 53193K
[ 3940.258] (==) RADEON(0): Backing store disabled
[ 3940.258] (II) RADEON(0): Direct rendering enabled
[ 3940.259] (II) RADEON(0): Render acceleration enabled for R100 type cards.
[ 3940.259] (II) RADEON(0): EXA VSync enabled
[ 3940.259] (II) EXA(0): Driver allocated offscreen pixmaps
[ 3940.259] (II) EXA(0): Driver registered support for the following operations:
[ 3940.259] (II) Solid
[ 3940.259] (II) Copy
[ 3940.259] (II) Composite (RENDER acceleration)
[ 3940.259] (II) UploadToScreen
[ 3940.259] (II) DownloadFromScreen
[ 3940.259] (II) RADEON(0): Acceleration enabled
[ 3940.259] (**) RADEON(0): DPMS enabled
[ 3940.259] (==) RADEON(0): Silken mouse enabled
[ 3940.259] (II) RADEON(0): Set up textured video
[ 3940.259] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 3940.259] (II) RADEON(0): [XvMC] Extension initialized.
[ 3940.259] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3940.259] (WW) RADEON(0): Option "DRI" is not used
[ 3940.260] (WW) RADEON(0): Option "AGPMode" is not used
[ 3940.260] (WW) RADEON(0): Option "AGPFastWrite" is not used
[ 3940.260] (--) RandR disabled
[ 3940.287] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3940.287] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3940.287] (II) AIGLX: enabled GLX_ARB_create_context
[ 3940.287] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3940.287] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3940.287] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3940.287] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3940.288] (II) AIGLX: Loaded and initialized radeon
[ 3940.288] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3940.289] (II) RADEON(0): Setting screen physical size to 270 x 203
[ 3940.601] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 3940.601] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3940.602] (II) LoadModule: "evdev"
[ 3940.602] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3940.602] (II) Module evdev: vendor="X.Org Foundation"
[ 3940.602] compiled for 1.14.3, module version = 2.8.2
[ 3940.602] Module class: X.Org XInput Driver
[ 3940.602] ABI class: X.Org XInput driver, version 19.1
[ 3940.602] (II) Using input driver 'evdev' for 'Power Button'
[ 3940.602] (**) Power Button: always reports core events
[ 3940.603] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 3940.603] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3940.603] (--) evdev: Power Button: Found keys
[ 3940.603] (II) evdev: Power Button: Configuring as keyboard
[ 3940.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 3940.603] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3940.603] (**) Option "xkb_rules" "evdev"
[ 3940.603] (**) Option "xkb_model" "pc104"
[ 3940.603] (**) Option "xkb_layout" "us"
[ 3940.647] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 3940.647] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3940.648] (II) Using input driver 'evdev' for 'Video Bus'
[ 3940.648] (**) Video Bus: always reports core events
[ 3940.648] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 3940.648] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3940.648] (--) evdev: Video Bus: Found keys
[ 3940.648] (II) evdev: Video Bus: Configuring as keyboard
[ 3940.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3/event3"
[ 3940.648] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3940.648] (**) Option "xkb_rules" "evdev"
[ 3940.648] (**) Option "xkb_model" "pc104"
[ 3940.648] (**) Option "xkb_layout" "us"
[ 3940.649] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 3940.649] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3940.649] (II) Using input driver 'evdev' for 'Power Button'
[ 3940.649] (**) Power Button: always reports core events
[ 3940.649] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 3940.649] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3940.649] (--) evdev: Power Button: Found keys
[ 3940.649] (II) evdev: Power Button: Configuring as keyboard
[ 3940.649] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 3940.649] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 3940.649] (**) Option "xkb_rules" "evdev"
[ 3940.649] (**) Option "xkb_model" "pc104"
[ 3940.649] (**) Option "xkb_layout" "us"
[ 3940.650] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 3940.650] (II) No input driver specified, ignoring this device.
[ 3940.650] (II) This device may have been added with another device file.
[ 3940.651] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3940.651] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3940.651] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3940.651] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3940.651] (**) AT Translated Set 2 keyboard: always reports core events
[ 3940.651] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3940.651] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3940.651] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3940.651] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3940.652] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3940.652] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 3940.652] (**) Option "xkb_rules" "evdev"
[ 3940.652] (**) Option "xkb_model" "pc104"
[ 3940.652] (**) Option "xkb_layout" "us"
[ 3940.653] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 3940.653] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3940.653] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 3940.653] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3940.653] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event6"
[ 3940.653] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3940.653] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 3940.653] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 3940.653] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 3940.653] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 3940.653] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 3940.653] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 3940.653] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3940.653] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 3940.653] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 3940.653] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 3940.654] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3940.654] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 3940.654] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3940.654] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3940.654] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3940.654] (II) No input driver specified, ignoring this device.
[ 3940.654] (II) This device may have been added with another device file.
[ 3940.655] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 3940.655] (II) No input driver specified, ignoring this device.
[ 3940.655] (II) This device may have been added with another device file.
[ 3941.474] (II) evdev: SynPS/2 Synaptics TouchPad: Close
[ 3941.474] (II) UnloadModule: "evdev"
[ 3941.474] (II) evdev: AT Translated Set 2 keyboard: Close
[ 3941.474] (II) UnloadModule: "evdev"
[ 3941.474] (II) evdev: Power Button: Close
[ 3941.475] (II) UnloadModule: "evdev"
[ 3941.475] (II) evdev: Video Bus: Close
[ 3941.475] (II) UnloadModule: "evdev"
[ 3941.475] (II) evdev: Power Button: Close
[ 3941.475] (II) UnloadModule: "evdev"
[ 3941.517] (EE) Server terminated successfully (0). Closing log file.
The funny part of this story is what I mentioned earlier before, i3-wm runs fine but when feh is called, it seems to spoil i3-wm natural behavior.
I hope these are the all the logs you want.
Thanks in advance.
Last edited by freesbies (2013-10-21 17:05:22)

Read what "exec" does (it's in bash(1), section Shell Builtin Commands).
Also look at other .xinitrc's on the web. You'll see that exec line is always the last one.

Strange Probem inopenning excel in different browser

Hi
i am fasing very strange problem right now i am openning same html page in excel file format in same browser window but as i tried to open it in different window it gives below error
And thing is that according to me there is no other file with same name or below reason .What can be the cause can u Help me
MicroSorf Excel can not access the file http://----- ?h1u=94&hex=exce there are several possible reason
The file name or path does not exist
the file you are trying to open used by abother program.close the document in other program , and try again
the name of work book u are trying to save is same as name of anopther document that is read only try saving the workbook with a different name .
Hope u will Definitely solve my problem
Thanks

Hi
Now on second time openning it give different message
Internet explorer can not download Statement.jsp:h1u=88&hex=exce from 12.12.2.67
Internet Explorer was not ablle toopen this internet site . the request site is either unavailable or can not be found .Please try again
And display file download dialog
Why it is happenning

Strange behavior with obssocookie on different browser

Similar Messages

Maybe you are looking for